Used Envelope To Léger for sale (10,559)

Condition: good (used), Year of construction: 2016, Müller Document Logistics System, envelope inserting machine – used: Price ex works: €39,500.00 (net)! Manufacturer: Müller Type: 2016 Year of manufacture: 2016 6984F: Outfeed tray incl. STOP 6978D: Envelope turner Dwedpjzcxxpsfx Adrea 8006C: Envelope inserting machine C5 / DIN long (approx. 6,000 cycles/hour) 6628C/4: Multi-channel system 6825C: Folding machine (top and bottom) incl. STOP incl. stop function in/out 6822C-SCHALLSCH: Soundproofing for folding machine 6822C-SCH-36583: Soundproofing for 6825C 6786D-L: Collection tray 6730C-L-STOPP: Transfer station 6692D: Sequencer 6784C-L: Transfer station 6600D-12K: Cutting machine incl. power supply 6600BH: Brush holder 6875C: Center knife A4, from stack, 2-up, pinfeed, face up / foot forward, always 2 sheets, Sequence Z-A New price: over €100,000.00 Condition: good Available: immediately Location: Lohne

Condition: new, overall weight: 3,500 kg, Year of construction: 2025, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ - We deliver the right vacuum suction system for your every need! - Worldwide delivery/Dealer inquiries welcome! Internal Number: #502 The images shown are sample images. Actual equipment and color may vary. STS V-2.0 Tank • 2,000 L capacity tank • Hot-dip galvanized tank • Tank slightly inclined to the rear for easier cleaning • Lateral cleaning port on the tank to remove contamination or blockages without opening the tank lid • Tank lid opens fully to the passenger side and is secured with hook bolts • Standard dual safety levels installed to prevent compressor damage • Siphon separator – overflow protection with 2 balls and viewing glass • Pressure gauge on suction assembly with protective bracket • Mechanical fill level indicator with color scale Engine and Compressor • MEC 3000 vacuum compressor, 3,500 L air flow • Maximum vacuum: -0.8 bar (continuous operation at -0.5 bar) • Maximum overpressure: 0.49 bar • Maintenance-free V-belt drive for vacuum compressor • Honda GX 390 industrial engine – electric starter, oil sensor, control panel with ignition switch, battery, and tank • Internal suction hose to prevent damage within the engine unit • Silencer for vacuum compressor with oil collection Dedpozi Ir Refx Adrswa • Stainless-steel heat shield above exhaust • 1 liter of biodegradable compressor oil, stored in oil bottle holder • 5L fuel canister in holder • Standard long-neck funnel for oil changes and refilling • All engine components and accessories stored in lockable engine compartment • Engine compartment made of aluminum and powder-coated in preferred color Chassis • Self-supporting chassis, fully hot-dip galvanized • Tandem low-loader chassis, 3.5t • Track width matches standard passenger cars and vans for optimal driving stability • Lowest possible center of gravity for the suction tank • 2 axles, each with 1,750 kg load capacity and independent suspension from a reputable manufacturer • Continuous welded V-drawbar • Robust metal fenders with integrated lamp housings • Stake holders for quick securing of suction hoses using rubber bands • Storage options for tools and accessories Vacuum Tank • Overrun brake with automatic reverse feature • Automatically locking ball coupling • Reinforced jockey wheel • 13-pin electrical connector Connections and Hoses • 2x suction hoses (3") 5m long with Perrot couplings • 1x suction lance 3" (1500mm long) • 1x Perrot connection (3") at the bottom of the tank lid • 1x Perrot connection (3") on the right side in the direction of travel Custom builds and special equipment available on request – Check our offers! For more details or photos, please contact us directly. A wide selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is responsible for independently verifying the condition and features of the item. The sale is made exclusively according to our Terms & Conditions and with exclusion of any warranty.

Condition: as good as new (ex-display), Year of construction: 2023, tool height: 200 mm, bending angle (max.): 180 °, pressing force: 42 t, sheet thickness (max.): 30 mm, sheet thickness copper (max.): 20 mm, lifting speed: 10 mm/s, bending force (max.): 42 t, Stierli bender 420 CNC Horizontal bending machine, with Siemens controler Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Dodpfx Adogqflqerswa Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Demonstration machine year 2023 incl. hand and foot pedal Horizontalbendingmachine as good as new Please contact us for more information for this horizontal bender.

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 130 mm, pressing force: 12 t, bending force (max.): 12 t, Stierli bender 120HE horizontal press Horizontal bending machine, manual control with angle fine adjustment. Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 12 tons Dwjdpfx Ajflc R Dsdrja tool height 130 mm Stroke 0-170 mm stepless Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: like new (used), Year of construction: 2024, tool height: 130 mm, sheet thickness copper (max.): 20 mm, bending force (max.): 12 t, Stierli bender 120 CNC Horizontal bending machine, Siemens controller Working force 12 tons Djdpfxoflc R Uo Adrswa Very universal, for flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools. tool height 130 mm Bending capacity 130x12 mm S235 Straightening performance light straightening work Pipe bending 3/8"-11/2" Backgauge length stop 1000/2000mm Program memory 200 programs Bending sets 20 bends Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, tool height: 200 mm, operating speed: 10 mm/s, working height: 200 mm, bending angle (max.): 180 °, sheet thickness steel (max.): 20 mm, sheet thickness copper (max.): 20 mm, lifting speed: 10 mm/s, bending force (max.): 42 t, Stierli bender 420HE Horizontal bending machine, with manual control and angle fine adjustment system Dwodpfjflc Spex Adrea Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 42 tons Tool height 200 mm Stroke 0-300 mm stepless Bending capacity 200x24 mm S235 Straightening power for HEA180 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Machine as good as new

Condition: as good as new (ex-display), Year of construction: 2024, tool height: 300 mm, stroke length: 350 mm, bending angle (max.): 180 °, pressing force: 82 t, sheet thickness steel (max.): 30 mm, sheet thickness copper (max.): 30 mm, lifting speed: 10 mm/s, bending force (max.): 82 t, Stierli bender 820HE Horizontal bending and straightening machine, with manual control and stroke fine adjustment system STRAIGHTENING with this horizontal press: Fast and precise straightening for welding parts, profiles, beams, sheets, pipes, flat steel, etc.... BENDING with this horizontalpress: Very universal, for bending flat steel, sheet, round steel, profiles, tubes angular or round, forming tools and easy fixing of own tools or special tools, + straightening as straightening press. Bending pressure 82 tons Tool height 300 mm Stroke 0-300 mm stepless Bending capacity 300x20mm (up to 300x30 with large V-block) S235 Straightening power for HEA260 Bending and straightening program via selector switch Demonstration machine year 2024 incl. hand and foot pedal Dwsdpfx Aogqfmnodrsa Machine as good as new

Condition: like new (used), Year of construction: 2024, load capacity: 6,000 kg, workpiece weight (max.): 6,000 kg, Stierli- ROTATOR 600 / 6 to 360° turning device for fast and safe turning and rotating of beams, profiles and welding components. Use for welding, plastering, fast welding visual inspection, as assembly turning device etc.... Dodpfjgqgb Ujx Adrswa Capacity: 6 tons Swing circle diameter: 600mm (e.g. beam HEB 600) Length of parts: freely selectable (stands are freely positionable by means of hand pallet truck) Adjustment of working height: Steplessly adjustable The Stierli rotator was developed to turn heavy and large loads such as beams and welded constructions quickly and safely without a crane. This saves you a lot of working time and increases productivity. This welding positioner or welding manipulator works as a lifting turning device with reliable chains. The turning device is not only used for beam welding, but other cross sections can also be turned with it, such as the use as a pipe turning device. Loading is impressively simple with the overhead crane, or by means of forklift loading. The rotator can be brought into position very easily with the hand pallet truck, whereby the distance between the uprights of this welding device is freely selectable.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, load capacity: 2,000 kg, SEVERT Double-Column Positioner S 40.1-1HH, 2 complete sets available with full documentation For welding or assembly applications Can also be used as a single column elevation and rotation unit (mono configuration) Total load capacity: 2000 daN Dwedpfx Aoyupkysdrsa Load capacity per column: 1000 daN Torque of clamping plate 1: 1400 Nm Clamping plate 2: free rotation without drive Clamping plate rotational speed: 2.0 min⁻¹ Clamping plate 1 dimensions: W1070 x H720 x D30 mm, Part No. 20452-001 Clamping plate 2 dimensions: W1070 x H720 x D30 mm, Part No. 20453-001 Vertical stroke: 680 mm Lifting speed: 2200 mm/min Welding current return: 400 A Dimensions (B2): Column 1 with base: Length: 970 mm Width: 885 mm Height: 2350 mm Net weight: 1200 kg Column 2 with carriage: Length: 970 mm Width: 1030 mm Height: 2350 mm Net weight: 1600 kg Excellent condition, complete documentation included We have multiple column elevation/rotator units in stock with load capacities from 1 ton up to 15 tons 2 complete sets (units) available

Condition: like new (used), Year of construction: 2023, functionality: fully functional, load capacity: 2,000 kg, Sideros turning device, column lifting and rotating unit, mobile on one side with positioning table. 2-ton load capacity. New, year of manufacture 2020, unused, with remote control. Minimum working height 350 mm. Maximum working height 1800 mm. Torque 3000 Nm. Speed 1 rpm. Vertical adjustment speed 560 mm/min. Vertical adjustment 1450 mm. Clamping plate diameter 600 mm. Motor power 4.45 kW. Rotational drive 0.75 kW. Lifting motor 1.85 kW. Machine height 2505 mm. Weight approx. 1050 kg. Condition: as new, unused. Shipping possible. Includes documentation, drawings, etc. Dwedsyr Affjpfx Adroa

Year of construction: 2020, condition: as good as new (ex-display), Protec KT 3000 HV, hydraulically adjustable in height Load capacity: 3000 kg Handheld remote control with digital display Dsdpfxef Ezc Ao Adrewa Dual-foot remote control Height: approx. min. 700 mm horizontally, max. 1400 mm Diameter of turntable: 1400 mm Tilting angle: min. 135° Speed: 0.05 to 0.6 RPM Motor power: 3 kW

Condition: used, mileage: 6,70,688 km, power: 185 kW (251.53 HP), first registration: 11/2006, fuel type: diesel, overall weight: 11,990 kg, axle configuration: 2 axles, next inspection (TÜV): 08/2026, color: white, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,740 mm, loading space length: 7,200 mm, loading space width: 2,480 mm, loading space height: 2,600 mm, Year of construction: 2006, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, According to our “General and Special Terms and Conditions”, without any guarantee or warranty, we are pleased to offer you, subject to prior sale, errors, and misprints, the following vehicle, non-binding until final contract conclusion: Iveco 120E25 Curtain Side/Flatbed with Tail Lift (Vehicle 32) First registration: 16/11/2006 676,688 km Engine: 5,880 cc 185 kW / 252 hp Euro 5 EEV TÜV (roadworthiness): 08/2026, SP (safety inspection): 02/2027 Overall dimensions (L x W x H): 9,100 mm x 2,550 mm x 3,740 mm Internal load space: approx. 7,200 mm (L) x 2,480 mm (W) x 2,600 mm (H) Side panels: 2x foldable per side, approx. 600 mm high Tail lift: Palfinger, mounted at rear, 1,500 kg lifting capacity Dodpfxjzh Sg Nj Adrowa 3 rows of wooden stake slats Ringfeder trailer coupling Leaf/air suspension Tyres: 265/70R22.5, front approx. 40/40%, rear approx. 50/50% Roof spoiler Foldable A-board Chock 3-seater cab 8-speed manual transmission 2 x electric windows, electric mirrors, heated mirrors Manual sunroof Radio/CD Hands-free telephone system Reinforced engine brake Chilled compartment, front, passenger side Replacement gearbox fitted in 2024 Drag link, track rod, and ends renewed in 2025 Price: €4,000.00 (net) All details are provided without guarantee or warranty. Our “General and Special Terms and Conditions” apply. For both parties, the court of jurisdiction up to a dispute value of €10,000 is the District Court Ludwigslust; for higher amounts, the Regional Court Schwerin applies. Subject to prior sale, errors, and misprints.

Condition: used, functionality: fully functional, load capacity: 5,000 kg, Accessories ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: As new Dsdsw Ez Tpopfx Adrowa Technical condition: very good Description: Adapter ISO 3A (51 cm) to ISO 4A (61 cm) Capacity 5,000 kg Width 1,500 mm ID OS1699

Condition: excellent (used), machine/vehicle number: 2069056, Equipment / Additional information: WITH DELIVERY BELT Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Dwedpfjw Rvu Dox Adrsa Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Year of construction: 2006, condition: excellent (used), machine/vehicle number: 1107, P/N: 190.101 Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Djdpfjihvl Iex Adrewa

Condition: excellent (used), machine/vehicle number: 783, P/N: 190.101 Dsdpfxjiiv Dno Adrjwa Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), Year of construction: 2001, machine/vehicle number: 003, Serial No.: 001 Djdpfet Hrmtex Adrewa

Condition: excellent (used), P/N: 190.101 // Fabrik No.: 616 Dwodpfx Adjgnlb Aerja Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), Volt: 220-240VAC // Amps. 1.8 // Hz: 50/60 // Ph: 1 // Kw: 0.4 WITH DELIVERY BELT Dwodpeh Eibaefx Adrja Return belts For 10.5 cm x 14.8 cm envelopes and portrait orientation, the straps should be pushed to the middle conveyor belt Rule: for large envelopes, push the straps out, for small envelopes press the straps (22) inwards. CONNECTION TO PRINTING MACHINE The STENZ FEEDER does not need synchronization. The feeder is guided by the handles the pressure machine and sets the required height with the crank. Important: only when the printing height is set, fix the rear rollers and check the stability. Turn on the machine and start printing. For single sheet feeder printing machines (GTO) adjustable inclination. Efficient printing of envelopes can now begin. Designed for heavy-duty use at maximum printing speeds. Compatible with all 36 x 52 print machines irrespective of the feed system (overlapped/single-sheet feed). - Requires no mechanical alterations to the printing machine - No need for synchronization adjustments as controlled by laser technology - Very short set-up time allows economic use from 1000 envelops upwards - Easy to operate - The design of the feeder results in a forced overlap. The Stenz Feeder is thus not restricted in throughput - A minimum of wearing parts for extremely long service life - Already approved in thousands of different print machines - A Swiss quality product - Designed by printers for printers. Specifications: Speed: Limited by print machine Length: 115 cm Width: 50 cm Height: adjustable between Max. format size: 36.5 x 35 cm Max. pass-through width: 36.5 cm Electrical: 230 V, 50 Hz

Condition: excellent (used), machine/vehicle number: 91-1101, Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST Dsdsdnr E Aopfx Adrswa

Condition: used, Year of construction: 2004, The SF-80 stands out particularly due to its large pre-stacking capacity of around 450 mm. The envelopes are pre-stacked upright and singulated by a special suction head. The transport occurs without deforming the material. Dodpfx Adowv S N Nsrewa Output conveyor

Condition: like new (used), Year of construction: 2008, functionality: fully functional, • BB300-10K envelope module "right" with BSC 2.0 user interface • Feeder system with 6 feeder positions "right" • 4x rotary feeders AT25 (at positions 1–4) • 1x hybrid feeder HF3 (at position 6) • 1x free feeder position with safety guard • long chain guide • 15” panel • Keiper stacking conveyor, 1.5m • Preparation for reading at a maximum of 6 positions • Vacuum sealing section with integrated discharge station • 1x turning conveyor • 1x envelope autoloader • D/V printing/vacuum pump with noise protection - With Müller channel – consisting of: • Module 6798 Autoloader • Module 6686 single-sheet feeder, 26,000 sheets/hour • Module 6896/6815 transfer unit with stop function Dodjzh Er Espfx Adrjwa • Module 6826/6822 second pocket folding unit, 2x top with stop function • Module 6786 collection pocket, standard up to 12” • Module 6730 transport module • Module 6730 transport module • Module 6955 Black Box • Preparation for camera reading

Condition: used, maximum load weight: 33,360 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 04/2025, next inspection (TÜV): 04/2026, loading space length: 6,000 mm, loading space volume: 29 m³, total width: 2,470 mm, total height: 3,900 mm, Year of construction: 2025, Equipment: ABS, D-TEC 3-axle container chassis 20 FT ADR with VANHOOL single-chamber pressurized tank, 29 cbm First registered April 2025 Tank container built in 2006 Unladen weight 5,640 kg Steel chassis, fully spray-galvanized and painted in 2-layer RAL 9005 Fifth wheel height 1,180 mm Tires: 6 x 385/65 R 22.5 Hankook High-gloss aluminum rims All-LED lighting, round rear headlights 2 x LED work lights SAF axles with large disc brakes, 430 mm 1st axle LIFT AXLE Dedpfx Adoyxb Hcjrswa KNORR Trailer EBS VANHOOL 20 FT tank container, V2A stainless steel Single-chamber 29,362 L volume Test pressure 2.86 bar Operating pressure 2 bar Door cover DN500 Outlet at the rear center of the stainless steel casing RENTING is the new BUYING. Rental or full-service leasing is available immediately.-----

Condition: used, functionality: fully functional, In this listing, you are purchasing a used “Francotyp FPi 2700 Envelope Stuffer, Serial Number” Item for Sale: 1 x Francotyp FPi 2700 Envelope Stuffer, Serial Number Dsdpfx Aozb Akmsdrjwa Condition: This listing is for a used device, which may show signs of wear (minor scratches or discoloration). The device has been tested for functionality. A test printout can be seen in the photo. Packaging and Shipping: You are welcome to view the device during our business hours. Please schedule an appointment! Sturdy packaging and worldwide shipping are available upon request! Before shipping or pickup, we’ll record a video of a functional test for you. For more information, please feel free to contact us directly.

Condition: excellent (used), Year of construction: 2008, Technical data: Working length: 6100 mm Distance between stands: 5230 mm Press force: 400 tons CNC control: OPERATOR II graphic TFT screen 14" Number of controlled axes: 8 Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 Automatic crowning Stroke: 350 mm Overhang: 420 mm Dedpfx Ajy D Sb Uodrjwa Laser monitoring Motor power: 38.5 kW CE marking Dimensions (length x width x height): approx. 6300 x 2500 x 3600 mm Weight: approx. 36.5 tons Note: Table extends approx. 450 mm into the floor Accessories: 1 set of tools: 1 upper tool punch: 120 mm 1 segmented die: V50, V35, V22, V16 Condition: Very good condition Only 5,500 operating hours In the meantime, we have stored the machine and disassembled the table The seller is not liable for typing or data transmission errors. The machine's appearance, technology, and wear correspond to its age; used machines are sold without any warranty.