Used Exhaustion for sale (2,665)

Condition: new, Year of construction: 2022, functionality: fully functional, power: 2.6 kW (3.54 HP), overall weight: 35 kg, type of input current: three-phase, input voltage: 400 V, volume flow: 6,630 m³/h, fuel type: electric, ebm-papst: K3G450-PW12-07 centrifugal fan, radial fan, air supply fan, exhaust fan, high-pressure fan The impeller, motor and electronics are optimally matched to each other, resulting in an overall efficiency of well over 60%. The external rotor GreenTech EC motor contributes significantly to this efficiency. NEW!!! in stock: 3 pieces Manufacturer: ebm-papst Type: K3G450-PW12-07 Year of manufacture: 2022 Speed: 2040 min⁻¹ (revolutions per minute)​ Air flow q V: 6630 m³/h Air pressure: mac 948 Pascal Place of origin: Germany​ Bodpfx Abjxt I Nkezoww Electrical parameters Power supply: 3 phases, 380-480V AC, 50/60Hz​ Current consumption: 4.1A / 400V​ Power: 2650W / 400V​ Other characteristics Efficiency: 70% (A, static)​ IP protection: IP55​ VSD (variable speed drive) integrated​ Ins.CI.F, AO, Electronically protected​ Standards: CE, EAC, UKCA, cRUus Dimensions Frame (height x width) 630 x 630 mm Impulse diameter: 450 mm Weight: 34.5 kg

Condition: good (used), functionality: fully functional, suction capacity: 7,500 m³/h, 3-bag sawdust extractor MAPELLI 5.5 kW Specification: • Condition - used, after inspection • Manufacturer - MAPELLI • Turbine motor power - 5.5 kW • Bag shaking mechanism • Turbine inlet - Ø350 mm • Filter surface area: 30 filter bags 20x120 cm • Capacity - approx. 8,500 m3/h • Airtight body with warm air return • Warm air return diameter - Ø500 mm • Collection bag diameter - 3 x 600 mm Bwedpow Av Amsfx Abzjw • Overall dimensions - 380/285 x 105 x 340 cm (length/length without turbine x width x height) • Transport height - 275 cm Additional information: • Good factory technical condition • The photos show the actual condition of the item for sale • Possibility to connect and test the device on site

Condition: used, No. 04497 Sanding dust extraction table / sanding table Schuko Octopus 20 Used Sanding dust extraction table for connection to an existing extraction system Base area 2280 x 1000 mm LW Practical storage area for hand tools Suction surface approx. 1950 x 700 mm LW Height of suction surface adjustable by 300 mm Suction connection 160 mm Required volume flow 2000 m3/h Required negative pressure 1100 Pa 2 sockets, 220 V 2 quick couplings for compressed air connection 2 quick couplings for vacuum connection 2 vacuum suction cups and various stops The table must be connected to an external suction system and vacuum generator Transport dimensions approx. 2500 x 1000 mm LWH Weight approx. 200 kg Bwjdpfx Aexrga Sebzow To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: excellent (used), LDS Shaker Special Here we offer a LDS Shaker Special. Shaker vibration tests: Shaker - Type V870-640T Testing for vibration and shock resistance in use and during transport Determination of vibration-related material parameters Fields of application: Engine components, exhaust gas turbochargers, vehicle parts, electronic assemblies. Type: V870-640T Condition: used / use Scope of delivery. (See pictures) (Changes and errors in the technical data, specifications are reserved!) Bwedpslzhxljfx Abzsw Further questions we can answer on the phone for you.

Condition: used, Year of construction: 2001, machine/vehicle number: 001048, - Manufacturer: Unisanding - Type: 2.2.0. 0-30 - Working width: 1300mm - Year of manufacture 2000 - 2 rollers flexibly adjustable from 0-30 ° working from above - Flex-Trim special brushes - Vacuum belt with vacuum motor - With glass pane on the operating side - External control panel with LCD control - Grinding motors: 2 x 2.2 kW with thermal contact - Feed motor: 1 x 1.5 kW with thermal contact - Vacuum motor: 1 x 5.5 kW - Height axis rollers: 1 x 0.18 kW - Feed 2-10 m/min frequency controlled - Brush speed: 50 - 350 rpm, frequency controlled - Voltage: 3 x 400V, 50Hz - Fuse: 32A - Consumption: 14 kVA - Exhaust air volume (vacuum) 3,000 m³/h - Dust extraction volume: 2,000m³/h – 5,000m³/h depending on the customer - Length: 2,170 mm - Width: 2,040mm - Height: 2,030 mm Bedpoxtakmjfx Abzjww - Color: RAL 7035 light gray - Operating side: left to right - Ex version: No - Location: at the Blomberg warehouse

Condition: used, Year of construction: 2008, 1200 m³/h 1600 Pa 1,1 kW Bwsdpfx Abow Tngqjzjw 24/50 V/Hz 750 x 700 x 1050 mm 90 kg Equipment: - Hose arm 3 m, internal joints

Condition: used, mileage: 14,75,133 km, power: 368 kW (500.34 HP), first registration: 05/2019, fuel type: diesel, number of seats: 82, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, +++ 2 double benches in the luggage compartment +++ +++ Engine overhauled by MAN 08/24 +++ +++ Alternator new, axle overhauled 06/21 +++ +++ Exhaust module new +++ General Engine: MAN AdBlue Emission standard: Euro 6 Total seats: 82 Seating: 80 + 1 + 1 sleeper seats Transmission: Automatic Safety * Retarder * Cruise control * Adaptive cruise control * ABS, ASR, ESP, EBS * Fog lights * Xenon headlights * Brake assist * Lane departure warning system * Rear view camera * Multifunction steering wheel Passenger compartment * Auxiliary heater * Wood-look flooring * Air conditioning Bedpfx Abexq Iubszjww * Tables * Curtains * Luggage racks * Luggage nets * Adjustable air outlets * Reading lights * Double glazing * Footrests * Kitchen * Refrigerator * Mid-cabin toilet * Leather headrest inserts * Tour guide microphone * Driver microphone * Interior surveillance camera Audio, Communication, Electronics * Navigation system * Radio, CD * USB port at every seat * USB port at multimedia system * USB port at driver’s seat * Video, DVD * Power sockets * Power inverter Exterior * Trailer hitch * Matrix/destination display by Aesys * Lifting/lowering system * Power steering * Digital tachograph card * Sun visor * Prepared for sleeper cabin * Electrically adjustable side mirrors * Ski box anchors * Central locking * Roof hatches * Roof fans * Roof air vent Other * Twin tyres * Vehicle length: 14.00 m * Vehicle width: 2.55 m * Tyre tread: front axle approx. 40% * Tyre tread: middle axle approx. 40% * Tyre tread: rear axle approx. 40% Our internal vehicle number: 11840 Errors excepted. Images and text may deviate from the actual vehicle. Over 300 vehicles permanently in stock.

Condition: ready for operation (used), Overall dimensions: 2500 x 6000 mm Cyclone diameter: 2500 mm Bodpfewfrl Asx Abzjww Cyclone height: 6000 mm

Condition: reconditioned (used), Year of construction: 1997, operating hours: 6,429 h, JENZ AZ 50 The machine is partially refurbished and offered at an attractive price. Bwjdpexrl D Nsfx Abzow The engine and rotor are running perfectly. Videos can be provided upon request. Full documentation is available. The following work has already been carried out: - Panels overhauled and newly painted - Minor welding work - Water cooler replaced The following work still needs to be completed: - Remaining welding work - Welding the exhaust line - New bearings for the plate conveyor - Painting of machine chassis - Complete assembly - Checking the radio remote control

Condition: good (used), Hall extraction system, chip filter system, filter system, chip extraction, wood chip extraction, Radial fan, chip extraction fan, fan, extraction, chip blower -Manufacturer: Holzmann, mobile extraction system type ABS 2480 -Engine: 1.47 kW Bwedpfxewk Ecls Abzsw -Fan wheel: Ø 320 x 80 mm -Base: on castors -Dimensions: 840/560/H570 mm -Weight: 38 kg

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. Bwodpfx Absu Ekfmezsw • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Condition: used, Year of construction: 2006, Empty weight: 10.000 kg Price: On request Extraction; Höcker Polytechnik Bedjwnh Uropfx Abzjww Year of construction 2006 Return air Band hose coupling Dimension drawn up; 8000x2500x11000mm (LxWxH) 106kW, fused 315 Amp Exclusive; Baling presses, briquette press etc. This is possible in one total package. - Year: 2006 - Documentation available: No - Control cabinet present: Yes - Shaking system: Yes - Current consumption [A]: 315 - Power [kW]: 106.0 - Transport weight [kg]: 10000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2024, operating hours: 15 h, functionality: fully functional, machine/vehicle number: 204065, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials. Equipment of the used machine • 1 cutting bridge and 1 multifunctional tool head The machine is sold with one driven circular knife, electric oscillating knife and one Milling Head + exhaust • Multifunctional tool head to hold max. 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool Bsdpfxjif Ek Re Abzoww • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Bodpfewmm U Usx Abzsww

Year of construction: 2017, operating hours: 9,819 h, condition: ready for operation (used), - USED - 10-AXIS SLIDING HEADSTOCK LATHE WITH BAR FEEDER MAX TURNING LENGTH: 320 mm MAX TURNING DIAMETER: 38 mm SPINDLE: 8000 rpm; 8 - 11 kW; 0,001 indexed C-axis COUNTER SPINDLE: 7000 rpm; 8 - 11 kW; 0,001 indexed C-axis X1-AXIS TRAVEL: 60 mm X2-AXIS TRAVEL: 115 mm X3-AXIS TRAVEL: 300 mm Y1-AXIS TRAVEL: 295 mm Y2-AXIS TRAVEL: ±50 mm Z2-AXIS TRAVEL: 140 mm Z3-AXIS TRAVEL: 320 mm DRIVEN TURRET HEAD: 10 VDI30 POS; 6000 rpm; 6 kW TURNING TOOLS: n.5 + n.4 DRILLING TOOLS: n.4 fixed tools CONTROL UNIT: SIEMENS 840D BAR FEEDER: IEMCA mod. BOSS 552-44LL WEIGHT: 4700 Kg OVERALL DIMENSIONS: 3600 x 2200 x 1750 mm ACCESSORIES: FUME EXHAUSTER ; SWARF CONVEYOR ; PIECE CONVEYOR ; PORTABLE HANDWHEEL Bedpfx Aoxfm Atsbzeww

Condition: used, Year of construction: 1991, total width: 1,200 mm, total length: 800 mm, total height: 1,100 mm, Empty weight: 200 kg - Main motor power [kW]: 7.5 - Year: 1991 - Flow capacity [m³/h]: 71 - Documentation available: No - Negative pressure [Pa]: 315 - Rotation speed [rpm]: 2900 - Connection diameter [mm]: 300 - Output diameter [mm]: 300 Bedpfx Aow N I U Hebzsww - Serial number: 2477 - Voltage [V]: 400 - Current consumption [A]: 13.8 - Fuse [A]: 16 - Power [kW]: 7.5 - Transport dimensions: 800mm x 1200mm x 1100mm (l x w x h) - Transport weight [kg]: 200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 35 h, functionality: fully functional, machine/vehicle number: 2002-045, Used machine CNC cutter/plotter Cutting area in X and Y: 3,500 x 2,100 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials Bwodpfx Abjfnlkwezew Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head The machine is sold with one driven circular knife and one punching tool. • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Green-blue exchange conveyor possible (offers high contrast for dark materials) Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2005, condition: ready for operation (used), - USED - CNC EXTERNAL GRINDING MACHINE CENTRE HEIGHT: 171 mm DISTANCE BETWEEN CENTRES: 430 mm MAX GRINDING LENGTH: 400 mm MAX ADMITTED LOAD: 150 Kg X-AXIS TRAVEL: 170 mm Z-AXIS TRAVEL: 600 mm RAPID FEEDS: 12 m/min SPINDLE: 830 rpm; 24 Nm Bsdpfx Abeh St Azjzjww GRINDING WHEEL SIZE: 508 x 80 x 203,2 mm MOTOR POWER: 7,5 kW CONTROL UNIT: FAGOR 8055 TCO WEIGHT: 4500 Kg ACCESSORIES: PAPER FILTER ; FUME EXHAUSTER ; MAGNETIC FILTER ; GRINDING WHEEL BALANCER NOTE: 0-9° SWIVELLING TABLE; SWIVELLING CHUCK; INVERTER FOR KEEPING THE PERIPHERAL EXTERNAL GRINDING WHEEL SPEED STEADY; PIECE LOCKING DEVICE WITH PNEUMATIC SYSTEM; HYDRAULIC OPENING TAILSTOCK AND DEVICE FOR SEARCHING THE CYLINDRICITY

Condition: used, Year of construction: 2017, total height: 1,000 mm, total width: 2,150 mm, total length: 3,250 mm, Empty weight: 2.500 kg Bwedewnicqopfx Abzjw - Year: 2017 - Documentation available: No - CE marking present: Yes - Serial number: 9452 - Capacity [m³/h]: 3450 - Number of filter bags [pcs]: 35 - Filter length [mm]: 1400 - Filter diameter [mm]: 15 - Connection diameter [mm]: 250 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 7.0 - Negative pressure [Pa]: 3000 - Nominal airflow [m/s]: 20 - Control cabinet present: Yes - Shaking system: Yes - Transport dimensions: 3250mm x 2150mm x 1000mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2025, operating hours: 10 h, functionality: fully functional, machine/vehicle number: 2025-078, working width: 1,600 mm, working height: 100 mm, cutting width (max.): 1,600 mm, number of slots in tool magazine: 2, Used machine CNC cutter/plotter Cutting area in X and Y: 1,500 x 1,600 mm. Multifunctional CAM cutting system in CNC knife technology for 2D cutting of leather, fabric, technical textiles, foam and other flat, semi-flexible or rigid, non-metallic materials.. Equipment of the used machine. • 1 cutting bridge and 1 Multifunctional tool head • max. material height 100 mm • Multifunctional tool head to hold 2 interchangeable tools • powerful vacuum blower for fixing the material • Standard equipped with gray conveyor table (Conveyor). Can be extended with other tools (on request): • EOT electric oscillating blade • POT pneumatic oscillating knife • PRT rotating blade • UCT universal blade • KCT Kiss-Cut tool • CTT creasing tool • V-Cut angle-cut cutting blade • Punching tool for pinches or holes • Printer mark detection • Camera registration • Milling Head + exhaust Easy-to-use function Bwedpfowgc I Rex Abzew • Easy interchangeable cutting tools, "PLUG & CUT • Intuitive user interface • Easy blade change • Vacuum zones can be activated with a click Fast amortization • Low cost with high added value • Best material utilization through nest expert software modules (not included in equipment) • High velocity • Constant precision Data: • Short cutting times due to high positioning speed up to 90 m/min. • Repeatabiliy +/- 0.25 mm • Cuts single or multiple layers • Suitable for both single ply and multi ply or sheet goods and roll goods (can be extended with suitable unwinder) (Product photo as example) The machine is CE certified.

Year of construction: 2012, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg SOURCE: FIBER 4000 ; 4000 W CONTROL UNIT: ByVISION Bwsdovghbqepfx Abzsw WEIGHT: 15000 Kg OVERALL DIMENSIONS: 12900 x 6750 x 2500 mm ACCESSORIES: FUME EXHAUSTER NOTE: AUTOMATIC NOZZLE CHANGE

Condition: used, Year of construction: 2002, total height: 2,900 mm, total width: 1,500 mm, total length: 4,300 mm, - Year: 2002 - Documentation available: No - Capacity [m³/h]: 5500 - Number of filter bags [pcs]: 48 - Filter length [mm]: 2000 - Filter diameter [mm]: 230 - Filter surface area [m²]: 73 - Connection diameter [mm]: 310 - Number of connections [pcs]: 1 - Main fan [pcs]: 1 - Main fan power [kW]: 4.0 - Extinguishing system: Yes - Disassembled: Yes - Control cabinet present: Yes - Collection bags: Yes - Number of bins/bags [pcs]: 3 - Voltage [V]: 400 Bodpow Hcd Sefx Abzoww - Fuse [A]: 16 - Power [kW]: 4.0 - Transport dimensions: 4300mm x 1500mm x 2900mm (l x w x h) - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Year of construction: 2021, condition: ready for operation (used), - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM Bwodpfx Abswwxuzezow X-AXIS TRAVEL: 4064 mm Y-AXIS TRAVEL: 2032 mm Z-AXIS TRAVEL: 70 mm WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1270 Kg SOURCE: FIBER 6000 ; 6000 W CONTROL UNIT: ByVISION ACCESSORIES: PORTABLE HANDWHEEL ; FUME EXHAUSTER NOTE: WITH SYSTEM ANTIL SPA 4020 yom 2021

Condition: ready for operation (used), Year of construction: 1999, - USED - 5-AXIS VERTICAL MACHINING CENTRE    X-AXIS TRAVEL: 1000 mm Y-AXIS TRAVEL: 600 mm Z-AXIS TRAVEL: 500 mm DISTANCE SPINDLE NOSE-TABLE: 682 mm RAPID FEEDS X-Y-Z: 40 - 40 - 30 m/min SPINDLE: 32000 rpm; HSK E50 B-AXIS: ± 25 ° C-AXIS: +180° -177 ° TABLE SIZE: 1400 x 815 mm MAX ADMITTED LOAD: 2000 Kg Bwedpfowmxnysx Abzow TOOL MAGAZINE: CHAIN-TYPE ; 20 POS HEAD: A/B AXIS AUTOMATIC CONTROL UNIT: FIDIA WEIGHT: 12000 Kg OVERALL DIMENSIONS: 2900 x 2800 x 3400 mm ACCESSORIES: FUME EXHAUSTER

Year of construction: 2020, condition: ready for operation (used), - USED - CNC PLASMA CUTTING MACHINE WITH MILLING UNIT WORKING AREA: 15000 x 3100 mm SOURCE: HYPERTHERM XPR300 MAX DRILLING DIAMETER: 40 mm SPINDLE: 250-7000 rpm; 15 kW; ISO 40 RAPID FEEDS X - Y: 32 m/min TOOL MAGAZINE: 8 POS Y-AXIS TRAVEL: 250 mm V-AXIS TRAVEL: 250 mm CONTROL UNIT: FANUC 30i-MODEL B ACCESSORIES: FUME EXHAUSTER NOTE: ON-BOARD SWARF SUCTION DEVICE; PLASMA CUTTING BEVEL HEAD Bjdpewqia Iefx Abzjww