Used Extension Ladder for sale (5,329)

Condition: new, axle configuration: 2 axles, Year of construction: 2021, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible fifth wheel load: 19,000 kg, Permissible axle load: 24,000 kg, Permissible total weight: 43,000 kg, Unladen weight according to DIN: approx. 12,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle center distance: 2,700 mm, Outer width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Widening/low-bed to: 3,050 mm, Low-bed/telescopic extension: 4,000 mm, B-dimension: 12,000 mm, Entire vehicle hot-dip galvanized, with epoxy resin primer and 2-component paint finish, Overwidth signage at the front and rear with red/white panels Wheels: 9x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Doors accessible from the outside in the corners on the left and right, storage box with lid behind the front panel, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to access the front upper deck from the low-bed, hydraulic coupling for detachment on the left side, 6-way Multi-Faster coupling, 6 lashing points, 3,000 kg design, on the outside of the upper deck / eyelets, 2 lashing points, 5,000 kg design, on top of the longitudinal beams (towards the rear) Low-bed: Climbing aids on the boom - extension, low-bed telescopic extension by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 lashing points, 10,000 kg design, on the outside in the outer frame, 24 socket tubes 90x90, evenly distributed for widening the low-bed to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang Rear upper deck: Front upper deck slanted and perforated for retrofitting ramps, galvanized by means of adapters, ramp receiver profiles (Altec) – C rails at the rear, 6 lashing points, 10,000 kg design, on the outside of the upper deck, 6 lashing points, 5,000 kg design, in the excavator well, 8 lashing points, 5,000 kg design, in the case of overwidth in the outer frame, closure of the excavator well at the front and rear with a wood-based floor panel (insertable) Electrical system: NATO connector, power supply from the towing vehicle, rotating beacon at the rear in the middle, side marker lights in LED design, standard tail light for vertical mounting (LC5), work lights on the upper deck to illuminate the low-bed, detachment: sensor for securing and pressure switch for the suspension Air: Aluminum air tank 60l (2x 10l, 2x 20l), TEBS modulator, locking mechanism for extension on the left and right (valve on the side in the rear upper deck), double quick-release valve Pedsyfvwbopfx Aphogr Hydraulics: Hydraulic system on the upper deck for steering, suspension, and detachable gooseneck Accessories: 2x 4 pieces of wood plank as support for widening the low-bed and intermediate table, 2 pieces of locking wedges for detachment, 4 pieces of support wedges On request, we will provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our homepage. Errors and prior sale excepted! Rental possible = Further information = Unladen weight: 12,500 kg Payload: 30,500 kg GVW: 43,000 kg Contact Tobias Ebert for further information.

Condition: used, mileage: 20,000 km, power: 335 kW (455.47 HP), first registration: 07/2025, fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #511 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure cleaning and suction-pressure tank superstructure ADR Type K 14.0 / 28 PE Body by KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material: S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Telescopic piston with 3 locking positions * (3,300l water / 10,600l sludge, 5,500l water / 8,200l sludge, 7,700l water / 6,000l sludge) * Suction from open waters possible—"comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * EMPTYING: via pneumatically-actuated piston * SLUDGE WATER DRAIN DN 80: for pushing the dirty water back through the boom into the sewer. Pjdpexc Sziofx Aphegr Vacuum system CVS VacuStar 1600 approx. 1,550 cbm/h at 400 bar * Approx. 20 m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Parallel guidance suction and high-pressure hose via boom * Suction hose reel hydraulic right-side with 30 m DN 75 (can be fully suctioned through) High pressure system Uraca KD 718 approx. 315 l/min at 170 bar * Large HD hose reel for 240 m 1" DN 25, 180° pivotable * Equipped with 160 m DN25 * Small HD hose reel for 80 m DN 13 hydraulically operated * Equipped with 80 m DN13 Special features hose storage cassette with telescopic boom DN 125 * Infinitely adjustable height of suction hose hydraulically via roller guide carriage * Extension arm for suction hose hydraulically and telescopically extendable and 180° pivotable * ADR version L4BH type class FL incl. EX/II, EX/III, and AT * Spray gun * LED beacon lights * LED area lighting * Remote operation of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing unit (heated) * Large cupboard rear left, e.g. for push camera * Reversing camera with 7'' color monitor incl. day/night mode * Noise protection panel in front of pump room * Large tool compartment * Toolbox * Holder for traffic cones * Vice * Ladder * Large advertising boards on right and left Special equipment: Chassis cover, axle load measuring system, front axle load 9.0 t, airbag driver's side, 220 Ah battery, battery master switch, standard and DuoMatic brake connectors, interactive multimedia cockpit, air pressure horn, electrical pre-wiring in cab 24V / 100A, driver assist system: high beam assistant and cornering light, driver assist system: traffic sign recognition, suspension: front springs 9.0 t, 4-leaf, tinted windshield with band filter, hazardous goods version ADR type FL, generator 150 A, speed limiter, gearbox 16-speed - type: G 280-16, rear axle crown wheel 300, cab air filter for construction vehicles, 3-piece mudguards, 3-piece mudguards with splash protection, fuel tank: 330 L aluminum left side, cooling system for hot climates, trailing axle 9 t steered, loadable, liftable, navigation system, PTO - flange splined, PTO gearbox-independent and clutch-dependent MB 1.65, parameterizable special module, chassis lowering without residual air pressure regulation, chassis overhang 1350 mm, smoker's package, rain sensor, tire pressure monitoring system, acoustic reverse warning and warning flash light (external warning signal) For further detailed information and/or images, please contact us directly. You can find a wide selection of more vehicles for SALE or RENT at: Changes, prior sale and

Year of construction: 2017, condition: used, functionality: fully functional, machine/vehicle number: E61SI17032579879, This is an SCC 61 WE combination oven/steamer in an electric version, from the premium manufacturer Rational, manufactured in 2017. The combination oven/steamer is a device from the latest SCC series, featuring triple-glazed glass and LED lighting. The device will be completely overhauled in our in-house workshop, and the combination oven/steamer is fully functional. These are example photos of the same model series; actual photos will follow. The base frame shown is not included in the offer but can be purchased as an option. AVAILABLE FROM WEEK 35!! The list price is €9,400 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational customer service technician. Are you looking for a specific Rational device type? Ask us; we have access to an extensive range of used and new equipment. We will gladly advise you on all device types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation or removal costs High-quality brand-name equipment at fair prices Professional overhaul/inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 This combination oven/steamer offers space for 5x 400x600mm trays. In automatic mode, the device automatically recognizes the ideal cooking path, the size of the food, the amount of food to be loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 847 x 776 x 782 mm Minimum door opening dimensions for transport W x H: 845x850mm Power connection: V: 400 / kW: 11 / Hz: 50/60 Capacity: 6x 1/1GN Weight: approx. 110 kg Serial number: E61SI17032579879 Year of manufacture: 2017 Condition: used, completely overhauled, fully functional Additional information: In combination oven/steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C), and combination (30°C to 300°C) Care Control - self-cleaning system Core temperature sensor Handheld spray gun with automatic retraction 8.5-inch color display and touchscreen 5 programmable fan speeds Integrated, maintenance-free grease extraction system Automatic start time preselection 7 cleaning levels for unattended cleaning - even overnight Humidification can be adjusted in 3 levels - from 30°C to 260°C 5 programmable fermentation levels USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors. Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by phone during our opening hours: Monday to Friday 9:00 a.m. - 1:00 p.m. and 2:00 p.m. - 5:00 p.m. Pgedpfxjzw H Sle Aphjr The sale is exclusively subject to our general terms and conditions.

Condition: new, axle configuration: 3 axles, Year of construction: 2022, Equipment: ABS, Technical data for the EBERT TLS 43 ATV special low-loader: Permissible saddle pressure: 19,000 kg, Permissible axle load: 36,000 kg, Permissible total weight: 55,000 kg, Unladen weight according to DIN: approx. 15,500 kg, Low-bed length i.L.: approx. 6,650 mm + 4,000 mm, Axle table length: 3,550 mm, External width: 2,550 mm, Loading edge/low-bed: approx. 200 mm, 350 mm, Sliding table length: 500 mm, Extension/low-bed to: 3,050 mm, Low-bed/extendable by: 4,000 mm, B-dimension: 13,300 mm, Entire vehicle hot-dip galvanized, with epoxy primer and 2K paint finish, overwidth signage at the front and rear with red/white panels. Wheels: 13 x Michelin 245 / 70 R 17.5 X MULTI T VB 143J/146F Steering: TRIDEC DLS with Tritronic Axles: 12,000 kg – DLS single-wheel suspension, hydraulically steered and hydraulically sprung Front upper deck: Sideboards, 600 mm high, corners angled on the front upper deck, doors accessible from the outside in the corners on the left and right, lockable storage box with a lid behind the front wall, height 600 mm, width 2,480 mm, depth 7,500 mm, spare wheel on the upper deck, behind the partition on the right, ladder on the right side to get from the low-bed to the front upper deck, hydraulic coupling for detaching on the left side, 6-way Multi-Faster coupling, 6 tie-down positions, 3,000 kg capacity, on the outside of the upper deck (eye-type tie-down points), 2 tie-down positions, 5,000 kg capacity, on top of the longitudinal beams (towards the rear). Low-bed: Climbing aids on the boom - extension, outer frame t=8 mm, low-bed extendable by 4,000 mm and lockable every 500 mm, with sliding table, lockable every 250 mm, 28 tie-down positions, 10,000 kg capacity, on the outside of the outer frame, 24 insertion pipes 90 x 90, evenly distributed for low-bed extension to 3,050 mm, 50 mm hardwood planks are placed between the extension tubes, 10 mm overhang. Rear upper deck: Upper deck sloping and perforated towards the front, for retrofitting ramp attachment profiles, using adapters with a galvanized finish, ramp attachment profiles (Altec) – C rails at the rear, 8 tie-down positions, 10,000 kg capacity, on the outside of the upper deck, 6 tie-down positions, 5,000 kg capacity, in the excavator well, 10 tie-down positions, 5,000 kg capacity, for overwidth on the outer frame, closure of the excavator well at the front and rear with a wooden floor panel (insertable). Electrical system: Pjdpsyfu N Aefx Aphogr Use NATO coil, energy comes from the towing vehicle, revolving beacon at the rear in the middle, side lights in LED version, standard rear light for vertical mounting (LC5), work lights on the upper deck, to illuminate the low-bed, overwidth signage at the front and rear for controlling the detachment, sensor for securing and pressure switch for the suspension. Air: Aluminum air reservoir 80 l, TEBS modulator, locking of extension on the left and right (valve on the side in the rear upper deck), double release valve. Hydraulics: Hydraulic system on the upper deck for steering, suspension and detachable gooseneck. Accessories: 2x 4 pieces of wooden plank as support for extending the low-bed and intermediate table, 2 pieces of securing wedges for detaching, 4 pieces of chock blocks. Upon request, we will provide you with a leasing or financing offer. Mr. Ebert (Tel. ) will be happy to assist you. Further information can be found on our website. Errors and prior sale are excepted! Rental possible GVW: 55,000 kg Please contact...

Condition: used, Year of construction: 2012, machine/vehicle number: DK25P, Dear Sir or Madam, We offer the following: Nominal capacity: 20 m³ Used, refurbished (ground, primed, and painted according to customer's color choice) Includes manufacturer's/test certificate DIN 6616-D. Material: S235JRG2 steel in steel Double-walled tank for above-ground installation, suitable for locations outside earthquake/flood zones. Shape: cylindrical, with saddle supports Tank dimensions: Pgedpfjcl Sfbex Aphsr Length: approx. 6,840 mm, Diameter: approx. 2,000 mm, Weight: approx. 3,500 kg Color: RAL paint, according to customer's specifications Equipment: - Filling pipe 3" with TW closure (filling cap) - Suction pipe 1 ¼" - Dipstick and dipstick closure, tank content indicator - Vent with cap 1 ½" - Limit switch with type approval - Leak detection device (optical) = LAS with leak detection fluid - Access ladder for side mounting, supplied separately Diesel pump Cube 70 70 l/min Delivery hose 4 m / extendable Motor: 0.5 kW, 230 V, 4.2 A Includes tank support, pipelines, ball valve and non-return valve, installed. Optional: 80 l/min diesel fuel dispenser with data recording +++++ Of course, you can also customize your tank system! We will gladly implement your color and equipment preferences to the best of our ability. All our systems are extensively inspected and checked by selected employees in our company. We also offer an affordable delivery service upon request. Inspection of our systems is possible at any time. Other tank systems for above-ground and underground storage are available in all sizes and are for sale on our premises. Have we convinced you of our offer? If you have any questions or requests, please feel free to call us; one of our experienced employees will be happy to advise you. We also purchase existing tank systems at any time. Trade-in of existing systems is possible. Sincerely, from Warstein Tank & Environmental Protection Wozniack

Year of construction: 2004, condition: used, Tank & Environmental Protection Wozniack – Certified Specialist Company according to the Water Resources Act Dear Sir or Madam, We offer a 20,000-liter double-walled storage tank for diesel fuel, complete with a new diesel fuel pump including data recording. Nominal capacity: 20 cubic meters Quantity: 1 Used, but completely overhauled, meaning the container has been cleaned, refurbished, primed, and painted. Color: RAL color; however, you can specify your own color preferences at any time. The system is primed and will be painted. Material: Steel in steel, material S235JRG2 Documentation: Manufacturer’s certificate/test certificate according to DIN 6616 D/2 and nameplate Quantity: 1 dipstick Quantity: 1 vent pipe Quantity: 1 fill pipe Quantity: 1 new limit switch Quantity: 1 new leak indicator with leak fluid Quantity: 1 ladder Quantity: 1 suction line Shape: Cylindrical storage container with feet/console Container dimensions: Length approx. 6,870 mm plus pump 500 mm Diameter approx. 2,000 mm Weight approx. 4,500 kg Storage: Above-ground HDMeco 80 system – new. Diesel fuel pump with tank data recording for 100 users Delivery rate: max. 77 l/min PC software: Windows, also Windows 7, USB interface including USB stick 4 m delivery hose (optional extension available), automatic nozzle with type approval, electrical connection 230 V Required accessories included in the system price: HDMe-RS = 2 m return hose with connections (pressure relief for the pump) Pgjdpfxocnkfto Aphsr EH-115 = 1 1/4" check valve with pressure relief, including connections Corrugated pipe set: 1 1/4", consisting of: 240 mm corrugated pipe with cathodic protection, including seals and flange connection Optional accessories: Transponder tag for contactless user identification. Of course, you can also customize your fuel storage system! All our systems are extensively inspected and checked by selected employees in our company. We also offer cost-effective delivery on request. Inspection of our systems is possible at any time. We have a range of other fuel storage systems for above-ground and underground storage in various sizes available for sale on our premises. All our fuel storage systems can also be offered without a diesel pump. Special offer: Liquid fertilizer – AHL fuel storage systems in sizes from 10,000 to 100,000 liters. Water tank/fire water tank also available. Price/Shipping The price for the fuel station is ex-works Warstein, unloaded. Delivery can be offered at a surcharge. Delivery time: immediately You will receive an invoice with VAT shown. In addition, we purchase existing fuel storage systems and, as a certified specialist company according to the Water Resources Act (WHG), can professionally empty, clean, dismantle, and transport them. Sincerely, from Warstein Tank & Environmental Protection Wozniack Enkerbruch 2 59581 Warstein

Condition: used, mileage: 6,800 km, power: 335 kW (455.47 HP), first registration: 01/2026, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2026, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #536 Mercedes-Benz Actros 2546 BL 6x2 with Kroll ADR suction/pressure tank vehicle K 1.0-13.5 / 36PESP Brand new KROLL ADR suction/pressure tank vehicle on a Mercedes-Benz Actros – built for the toughest jobs right from the start. Maximum suction power, a powerful high-pressure system, and high-quality ADR L4BH technology make this vehicle an excellent choice for professional disposal companies and industrial operations. Superstructure * Manufacturer: KROLL * Tank material: S355J2+N (St 52.3) * ADR suction/pressure tank K 1.0–13.5 / 36PESP * Container volume, air: approx. 13,500 l; sludge volume: approx. 11,200 l * Emulsion chamber: max. 4,589 l * Rinse water (non-pressurized): approx. 1,000 l * Discharge via extension piston * Chassis: * Mercedes-Benz Actros 2546 L 6×2 * PowerShift 3 automatic transmission * 460 hp / 338 kW * EURO 6e; diesel tank: 400 l * Cab color: Arctic White * 2x LED rotating beacons on the cab * Rearview camera * Navigation system * Air conditioning * Vacuum system: * CVS VacuStar W1300 – approx. 1,200 m³/h at 400 mbar * Suction hose reel for approx. 50 m DN75 (tank lid, passage through the tank) incl. 30 m plastic suction hose DN75 * High-pressure system: * Speck P45/85-160 * Delivery rate: 85 l/min at 160 bar; small hydraulic HD hose reel for approx. 60 m DN13, hydraulically operated * Incl. 60 m HD hose, rubber DN13, hydraulically operated * Special features: * ADR design L4BH (incl. EX/II, EX/III, AT) * Upper suction port DN100, remote-controlled * Manhole DN500 on the top, with ladder and work platform * HD pistol * Soundproofing cladding on the left and right in front of the pumps * LED ambient lighting * Remote control * Tilting scrap container Psdpfx Apsv Nu Sbshogr * Ladder with bracket and fixing points * Advertising panels on the left and right of the tank Conclusion: An extremely robust, fully ADR-approved KROLL suction/pressure tank on a Mercedes-Benz Actros base – with a powerful W1300 vacuum system, a high-performance HD unit, and complete safety and comfort features. Immediately ready for use in industry, waste disposal, sewer services, and hazardous goods transport. For more detailed information and/or pictures, please contact us directly. You can find a wide selection of other vehicles for PURCHASE or RENT at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale takes place exclusively according to our general terms and conditions and with the exclusion of any warranty.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: H2X386V11845, Year of construction: 2019, operating hours: 8,200 h, load capacity: 1,600 kg, lifting height: 4,625 mm, free lift: 1,519 mm, fuel type: electric, mast type: triplex, construction height: 2,178 mm, Linde E16 L electric forklift in good condition with extensive features. No pending maintenance, and a new safety inspection certificate will be provided upon delivery. TECHNICAL DETAILS Load capacity: 1,600 kg Load center: 500 mm Lifting height: 4,470 mm Free lift: 1,519 mm Psdpfxezvgf Ne Aphogr Fork length: 1,200 mm MACHINE DETAILS Mast type: Triplex Fuel type: Electric Battery capacity: 750 Ah Battery voltage: 48 V Battery weight: 1,013 kg Operating hours: 8,200 h Overall height: 2,178 mm FEATURES Double pedal Central lever control (LLC) Additional hydraulics for 2 functions / 4 valves KAUP fork positioner Side shifter 3 LED work lights Lighting Superelastic tires Cabin Heater Seat heating Air conditioning Charger High-quality HF charger UVV / FEM certificate renewed upon delivery The tires can be replaced for an additional cost. An inspection and test drive can be arranged at any time. Transportation can be organized upon request, and loading is possible on-site.

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Psdpfx Apsy Ufk Rjhsgr Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, total length: 1,250 mm, total height: 1,900 mm, total width: 2,000 mm, overall weight: 1,850 kg, No minimum price – guaranteed sale to the highest bidder! Lease return due to factory closure. Machine for the automatic and precise separation or singulation of printed circuit boards from a PCB panel. MACHINE DETAILS New price 2024: €149,000.00 net Processed printed circuit boards: 42,680 pieces Dimensions of pallet (L x W x H): 1,250 x 2,000 x 1,900 mm Machine weight: approx. 1,850 kg EQUIPMENT Cutter diameter control Wear parts package DIVISIO Automatic transport width adjustment SMEMA transport height Separation module, shank cutter 500 W Hardware module, camera Software module, teach function for camera Software module, fiducial mark recognition Extension, 8-position tool changer Extraction hose, manual Monitoring of suction power ASYCAM CAD data conversion A Adrep Pgedpozvb I Ejfx Aphor Offset main switch ESD energy chains and P-hoses, standard Packaging size, group 3 pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and commenced day will be charged. The fee must be paid before collection. • The sale is made without any guarantee or warranty. • No liability is accepted for typing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: not inspected (used), machine/vehicle number: XMS00835, No minimum price – guaranteed sale to the highest bidder! For sale is a Canon imagePRESS C850 with extensive accessories and a controller system. This machine is suitable for professional production and color printing in formats up to DIN A3. TECHNICAL DETAILS Manufacturer/Model: Canon imagePRESS C850 Device Class: Copier / Production Printing System Serial Number: XMS00835 Printing Technology: Color Laser Maximum Format: DIN A3 Page Counter: 5,283,148 pages Network: Yes WLAN: Yes Duplex Printing: No Condition: Used Controller System Model: CONTROLLER_T42 Serial Number: 1711072031 Housing: Tower Housing Hard Drive: 500 GB Operating System: Not installed EQUIPMENT Canon imagePRESS C850 Controller System CONTROLLER_T42 Tower Housing 500 GB Hard Drive Booklet Trimmer-F1, Item Number F713900 Document Insertion Unit N1, Item Number F281260 SSD Bridge, Serial Number 75724 SSD Square Fold Module SFM 7714, Serial Number 75723 Paper Deck-C1, Item Number F281030 Booklet Finisher-W1 PRO, Item Number F710700 The printing machine and accessories are offered without technical inspection. A functional test of the individual components could not be carried out. The data storage device of the printing machine has been destroyed and recycled. HDD/SSD of the printing machine is missing. The toner or printer cartridge is almost empty. The controller system does not have an installed operating system. Pgodpfx Aezu Adfsphor The accessory components are explicitly sold as untested. Please note the following: The height and weight of the asset must be considered when selecting the transport vehicle. A forklift is available for loading. If the item is not collected on time, a storage fee of €20.00 per lot and per day (or part thereof) will be charged. The fee must be paid before collection. The sale is made with the exclusion of any warranty and guarantee. The information on the technical data comes from the original offer. No guarantee is given for typing and measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the end of the auction.

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 25,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #583 Mercedes-Benz Arocs 2546 6x2 with combined high-pressure flushing and suction tank body, ADR Type K 14.0 / 28 PE This Mercedes-Benz Arocs 2546 6x2 with a combined KROLL high-pressure flushing and suction tank body is a NEW vehicle in a complete ADR L4BH configuration. Equipped with a VacuStar 1600, Uraca KD 718, large hose storage cassette, telescopic boom, and extensive special equipment, it is immediately ready for the most demanding sewer, industrial, and hazardous material operations. Body ? Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH ? Tank material: S355J2+N (St 52.3) ? ADR suction/pressure tank Type K 14.0 / 28 PE ? Extension piston with 3 locking points: ? 3,300 l water / 10,600 l sludge ? 5,500 l water / 8,200 l sludge ? 7,700 l water / 6,000 l sludge ? Suction from open bodies of water possible ("comfort version") via cassette boom with integrated filter ? Tank wagon equipment ADR - Type class AT/FL L4BH ? Emptying via pneumatically operated piston ? Sludge water drain DN80 for pumping back via the boom into the sewer ----Vacuum system ? CVS VacuStar 1600 - approx. 1,550 m³/h at 400 mbar ? Approx. 20 m HD hose DN125 ? Hose storage cassette with simultaneous telescopic boom DN125 ? Parallel routing of suction and HD hose via boom ? Right-hand suction hose reel (hydraulic) with 30 m DN75, can be suctioned through ----High-pressure system ? Uraca KD 718 - approx. 315 l/min at 170 bar ? Large HD hose reel for 240 m DN25, 180° swiveling ? Equipped with 160 m DN25 ? Small HD hose reel for 80 m DN13 (hydraulic) ? Equipped with 80 m DN13 ----Special features ? Hose storage cassette with telescopic boom DN125 ? Infinitely adjustable height of the suction hose (hydraulic, roller guide carriage) ? Boom arm hydraulic, telescopic, 180° swiveling ? ADR L4BH incl. EX/II, EX/III and AT ? Spray gun Pgedpozuiyasfx Aphjr ? LED rotating beacons ? LED ambient lighting ? Working functions remotely controlled via CAN-BUS ? Radio remote control with 14 functions ? Hot water hand wash basin ? Large equipment cabinet at the rear left (e.g. for a push camera) ? Reversing camera with 7" color monitor (day/night mode) ? Soundproofing cladding in front of the pump compartment ? Large equipment box ? Tool box ? Holder for traffic cones ? Vise ? Ladder ? Large advertising panels on the right and left ---- Conclusion A fully equipped, new Arocs/KROLL combination vehicle with a powerful suction unit, 315 l/170 bar HD system, ADR L4BH, and extensive special equipment. Ideal for professional companies with the highest technical requirements. For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is made exclusively subject to our terms and conditions and with the exclusion of any warranty.

Condition: used, mileage: 22,000 km, power: 353 kW (479.95 HP), first registration: 06/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 08/2026, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal number: #348 MAN TGS 26.480 6x2 -4 BL with combined high-pressure flushing and suction-pressure tank body ADR Type K 14.0 / 28 PE Body KROLL Fahrzeugbau-Umwelttechnik Gmb * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Tank material S355J2+N (St. 52.3) Podpfx Apsx Rv Raohsgr * ADR suction/pressure tanker type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300 l water/10,600 l sludge, 5,500 l water/8,200 l sludge, 7,700 l water/6,000 l sludge) * Suction from open waters possible "comfort version" via cassette boom with integrated filter * Tanker equipment according to ADR - type class AT/FL L4BH * DRAINING: by means of a pneumatically actuated piston * MUDDING WATER DRAIN DN 80: for pushing back the dirty water via the boom into the sewer. * Manhole DN500 MAN TGS 26.480 chassis * 6x2 - 4BL * TipMatic with OMSI * 470PS/346KW * EURO 6e * Fuel capacity 400l * Chassis color RAL 9010 pure white * Color cab RAL 9010 pure white * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550cbm/h at 400bar * Drive: flexible, via cardan shafts, V-belts and pneumatically switchable friction clutch from the auxiliary drive of the vehicle engine. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Reach stop side 5,200 mm * Additional suction hose hoses with suction at the right rear with approx. 30 m DN 80 suction hose High pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via cardan shafts, V-belt and pneumatically switchable friction clutch. * approx. 240m HP hose DN 25 * Large HP hose reel for 240m 1? DN 25 180° swivel * Equipped with 240m DN 25 * small HP hose reel for 80m ?? DN 13 hydraulic * equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely variable height adjustment of the suction hose hydraulically via roller guide carriage * Hydraulic and telescopic extension arm for suction hose that can be swiveled through 180 * ADR version L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Removable and swiveling halogen work lights * LED ambient lighting * Remote control of work functions via CAN-BUS technology * Radio remote control with 14 functions * Hand-washing device (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7? color monitor incl. day/night switching * Sound insulation cladding in front of pump compartment * WATER MANAGEMENT WARNING SYSTEM: with buzzer in the main control cabinet and automatic pump shutdown. * Residual water drainage: pneumatic for all water-bearing parts with connection to the truck compressed air system. * Large equipment box * Tool box * Holder for traffic cone * vice * ladder * Large advertising boards on the right and left * Manhole DN500 Technical data* GGW 26.000KG * Empty weight 18,760 KG * Length 9,280mm * Height 3,740mm * Width 2,550mm * Wheelbase 3,900mm For more detailed information and/or pictures please contact us directly. You will find a large selection of other vehicles to BUY or RENT under: Subject to alterations, prior sale and errors excepted. The buyer is obliged to independently check the condition and equipment of the goods.

Condition: defective spare-parts repository (used), functionality: not functional, Year of construction: 1972, * Former Berlin Fire Department truck. * MAN 450 HD-L. Built in 1972. Registration card available. Pjdpfxjwlqzcj Aphsgr * Engine - Frost damage. Spare engine available.

Condition: new, mileage: 100 km, power: 390 kW (530.25 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 44,000 kg, color: yellow, Equipment: ABS, air conditioning, all wheel drive, crane, electronic stability program (ESP), parking heater, Available immediately!!! Specially designed recovery boom with lifting fork for recovery and towing of damaged vehicles, trucks, tractor units, buses, trailers, etc. Fully hydraulic system. 3rd coat HDRV paint (STANDARD) Toolboxes (internal): yellow RAL 1032 Toolboxes (external): yellow RAL 1032 Lifting fork: black, U-TEXT RAL 9005 Recovery boom: black, U-TEXT RAL 9005 Rear stabilizers: black, U-TEXT RAL 9005 Counterweight (front, under cab, if applicable): black, U-TEXT RAL 9005, smooth front chassis (STANDARD) - Hot-dip galvanized - For installation of front counterweight - Rear part painted in superstructure color (STANDARD) - Lifting angle 40° (Illustration HDRV 1013) - Mounting plates for main and auxiliary winches - Shackles 2x15000kg - Left and right side on the rear part of the arm - Space for spare wheel holder on recovery boom. 6. Lifting fork (STANDARD) - Position range relative to horizontal axis: -5° / +10° - Load capacity retracted: 20,000 kg - Load capacity extended: 10,000 kg - Extension: 3,800 mm - Range up to hydraulic rear stabilizers (STANDARD) - Independently controlled - Maximum width: 3,000 mm - Rotating stabilizers for asphalt work and hydraulically extendable beam, No HDRV 1013 Single extension: 0 - 3,000 mm Maximum payload: 2,000 kg – tank storage behind cab - Relocation of air tank behind cab - Relocation of battery behind cab - Relocation of AdBlue tank - Counterweight behind cab on front frame (weight 100 kg) - COME UP Bison 50 main winch, mounted on recovery boom, pulling force 22, - COME UP Bison 50 auxiliary winch, mounted on recovery boom, pulling force 22, - Hydraulic system (STANDARD) - Dual hydraulic pump (STANDARD) - Hydraulic control block on right side (STANDARD) - Right side, rear quick couplings for brake system supply, transferred from chassis - Quick-release connector with 20-meter cable - Air pressure roller, on left side of superstructure, - Over rear axles electrical trailer socket + trailer coupling, from chassis - Jump-start aid 12V/24V, cable, lever, right side mounted - Jump-start aid 12V/24V, cable, lever, left side mounted Psdpfx Aepl Avdsphsgr - Camera + LCD monitor in cab - Camera for winches + LCD monitor in control box MONITOR: - Vibration resistance: 10G - Shock resistance: 100G - Operating temperature: -30 to +70°C - CE marking - EMC approval: includes emergency stop switch - Radio remote control – 1 function - Made from aluminum - Holders for tools and accessories - Floor with rubber mats - Small ladder - Auxiliary ladder in toolbox opening – doors - Guard rail on toolboxes – stainless steel - Aluminum platform, perforated, mounted on top of toolboxes - Stainless steel holders in large toolbox behind cab for forks, hooks, open - Toolbox edges with stainless steel profiles - Lighting package compliant with road traffic regulations - LED lighting in toolboxes - LED external lighting - GAMET DE LUX LED warning lightbar, 1,800 mm - Mounting of warning lightbar on upper part of superstructure - ORANGE BLITZ warning light, 2 pieces – front mounted - ORANGE BLITZ warning light, 2 pieces – rear mounted - ORANGE BLITZ warning light, 2 pieces – mounted at edge of last toolbox door - Switches for all auxiliary lights

Year of construction: 2015, condition: ready for operation (used), functionality: fully functional, JOCAR log ladder - 4 steps Pjdpswiia Sofx Aphjgr - includes hydraulic power pack Very robust

Year of construction: 2009, operating hours: 89,479 h, condition: good (used), functionality: fully functional, Grinding robot for machining forged or cast water fittings, operating air pressure 5.5-6 bar, operating voltage 400 V-50 Hz, rated current 13 A, Pgsdpfxezvn Tzs Aphjr rated power 8 kW, ongoing maintenance until 2026, extensive range of accessories.

Condition: used, mileage: 15 km, power: 108 kW (146.84 HP), first registration: 04/2026, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,450 mm, total width: 2,100 mm, total height: 2,500 mm, loading space length: 3,800 mm, loading space width: 2,050 mm, Equipment: air conditioning, central locking, electronic stability program (ESP), The Maxus Deliver 9: a reliable partner for your day-to-day operations. With an attractive price-performance ratio and modern technology, it offers a solid foundation for anyone looking for a practical, economical, and robust commercial vehicle. The 2.0-litre turbo diesel delivering 108 kW ensures reliable performance for daily transport and construction site tasks. Combined with the professionally built Henschel three-way tipper, the Deliver 9 truly demonstrates its strengths where flexibility and payload capacity are essential. The Maxus Deliver 9 impresses with low operating costs and well-considered features—ideal for businesses that value efficiency and reliability. Thanks to its modern design, it is built for longevity and is ready to support you in any task. The vehicle is in new condition and available for immediate delivery, allowing you to benefit from its practical capabilities without delay. Manufacturer’s warranty: 3 years or up to 160,000 km (whichever comes first)—valid from initial registration. Equipment & Comfort • Air conditioning • USB/MP3 radio • Bluetooth • 3 front seats • Multifunction steering wheel • Cruise control • Trip computer • Electrically adjustable exterior mirrors • 2 electric windows • LED daytime running lights Pjdpfoyqcbwsx Aphegr • Light sensor • Central locking with remote control • Spare wheel Safety & Assistance Systems • ESP • Hill start assist • Emergency brake assist • Lane departure warning Body & Special Features • Henschel three-way tipper with ladder rack • Tow bar • TÜV approval per §13 --- Tranutec – The commercial vehicle professionals! We offer you 15 years of experience in commercial vehicles! In addition to top prices, we also provide custom solutions tailored to your needs. For example, as optional equipment ex works Tranutec: • Leaf guard grilles • Side panel extensions • Tarpaulin bows • Warning light bars • Tow bar (short for three-way tippers, prevents damage to side panels) • Underbody toolbox fittings, etc. • Municipal conversions Contact us! We would be happy to provide you with a tailored offer to match your requirements. --- All vehicle details are provided without guarantee and are non-binding. Changes, errors, and prior sale are expressly reserved. Despite maximum care in creating our listings, deviations in technical specifications, features, materials, or the external appearance may occur. The subject of the contract is exclusively the vehicle as offered and in the condition existing at the time the purchase contract is concluded. Please check all relevant equipment features and technical details directly on the vehicle before signing the contract. Thank you for your trust in Tranutec. We are always happy to help and advise you in finding the right vehicle for your needs. Do not hesitate to contact us if you have any questions or would like to arrange a viewing. We look forward to welcoming you in person soon. Your Tranutec Team

Condition: new, power: 207 kW (281.44 HP), axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, Mr. Seidel will be happy to assist you with any enquiries regarding the vehicle (by phone). Pjdpsyfrpmsfx Aphogr Iveco Eurocargo ML160E28/P 4x2 refrigerated box body with side door and tail lift Tail lift: Bär BC 1500S4 (1,500 kg), Refrigeration: Thermo King T-1200R-50, KIESLING refrigerated box, monotemp, tail lift ref. AN 232393, Length: 7,400 mm, Width: 2,480 mm, Height: 2,400 mm, axle configuration: 2 axles, rear axle drive, cab: standard cab NS, Engine: 280 TY, Transmission: ZF automatic 8AP, Gross vehicle weight rating: 15-16 t, Drive axle: single reduction, single axle, rear axle air suspension, brakes: disc/disc, wheelbase 5,175 mm, Driver Drowsiness Attention Warning system, standard frame overhang, AdBlue tank heating, standard braking system, Electronic Stability Program (ESP), intake air heater for optimal cold start performance in extreme temperatures, reversing camera system, Blind Spot Information System (BSIS) on right, Intelligent Speed Assistance (ISA), Moving Off Information System (MOIS), pneumatic parking brake, 200-litre plastic, lockable fuel tank, plastic steering wheel, heated fuel pre-filter on frame, standard chassis component arrangement, wiring for alcohol interlock (ALC), 30-litre AdBlue tank, Tyre Pressure Monitoring System (TPMS), sensors internal, rear axle ratio 4.13, Lane Departure Warning System (LDWS), Connectivity Box 4G including TCO service contract, voltage converter 24/12 Volt (10.5 Amp), hill start assist (Hill Holder) for comfortable uphill starts, Advanced Emergency Braking System (AEBS), speed limiter 90 km/h, Adaptive Cruise Control (ACC), clothes rail on rear cab wall with adjustable hooks, manual cab tilt device, warning triangle according to ECE-27, front halogen headlights, standard flat-roof cab, radio with Bluetooth, DAB+ and 7" display, mirrors for 2,600 mm body width, mechanical roof hatch, plastic bumper, black cab attachments, fabric-trimmed cab interior, digital tachograph 4.1, white flat roof, rear air suspension, front parabolic spring, 2 wheel chocks, left-hand drive for right-hand traffic, specification for temperate climate, front manoeuvring and towing eye, front underrun protection for chassis with GVW >7,490 kg, grey chassis frame, C-profile steel ladder frame, chassis protection sealing Tectyl 300 G Clear, ZF 8AP1000 automatic gearbox, centrally mounted exhaust tailpipe, air filter unit under cab, EURO VI E emission standard, NOISE ECE 51/03, two-stage engine brake, can be activated via right-hand column stalk, Westinghouse brake, raw air intake without snorkel, heated air dryer for brake system, extension module for PTO control, axle load indicator in cluster, tyres 305/70R19.5, LED tail lights, without battery isolator switch, electrical preinstallation for tail lift operation according to VEHH standard, reverse warning buzzer (deactivatable), 170 Ah batteries (recommended for tail lift and/or PTO use), toll system preparation (OBU), includes antenna and wiring on dashboard without receiver, alternator: 2,880 Watt (24 Volt x 120 Amp), electrical preinstallation for cargo area lighting,...

Condition: new, mileage: 50 km, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,850 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ Internal Number: # 533 Mercedes Benz ACTROS 2546 6x2 / Kroll ADR Suction Tanker, K 1.0 - 13.5 / 36 PESP This Mercedes-Benz Actros 2546 6x2 is equipped with a powerful KROLL suction/pressure tank body, ADR class L4BH, and offers a robust and efficient solution for demanding industrial, sewer, and emulsion suction work with a 14,500-liter tank volume, VacuStar W1300, and Speck P45/85-160. With a telescopic DN100 boom, extensive special equipment, and comprehensive safety and comfort features, this vehicle is optimally equipped for professional operations. Body Manufacturer: KROLL Fahrzeugbau-Umwelttechnik GmbH * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle K 1.0-13.5 / 36 PESP * 14,500 liters tank size (air volume) * 10,000 liters sludge volume / 3,500 liters emulsion chamber * 1,000 liters flushing water volume (non-pressurized) * Emptying with ejector piston Pedpex Eqmxofx Aphegr Chassis MB ACTROS 2546 6x2 * Automated transmission * 460 hp / 338 kW * 2,200 Nm * EURO 6 * Fuel volume approx. 500 l * Cab color MB 9147 Arctic White * 2x LED rotating beacons on the cab * Reversing camera * Navigation * Air conditioning * Cooler box Vacuum System CVS VacuStar W1300, approx. 1,200 m3/h at 400 mBar Suction hose cassette with telescopic boom and 20m DN100 High-Pressure System * Speck P45/85-160 / approx. 85 l/min at 160 bar * Small hydraulic HD hose reel for 60m DN 13 * Approx. 60m flushing hose DN 13 Special Features ADR design L4BH type class FL incl. EX/II, EX/III and AT * Suction connection pre-chamber DN100 remote controlled * Manhole DN500 on the left side * HD pistol * Soundproofing cladding in front of the pumps on the left and right * LED ambient lighting * Radio remote control with two batteries * Tilting scrap container * Reversing camera * Ladder with bracket and locking points * Advertising panel on the left and right of the tank Technical Data GVW 26,000 kg * Length 10,700 mm * Height 3,800 mm * Width 2,550 mm * Wheelbase 3,900 mm Conclusion: A professionally equipped Mercedes-Benz Actros 2546 with a powerful KROLL ADR suction/pressure tank body, VacuStar W1300, Speck high-pressure system, comprehensive comfort and safety features, and a telescopic DN100 suction arm. An ideal solution for industrial, sewer, and emulsion suction projects where performance, efficiency, and reliability are essential. For further detailed information and/or pictures, please contact us directly. A large selection of other vehicles for SALE or RENT can be found at: Subject to changes, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any warranty.

Condition: used, mileage: 2,896 km, power: 434 kW (590.08 HP), first registration: 05/2026, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 5,150 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 11,030 mm, total height: 3,960 mm, loading space length: 6,320 mm, loading space width: 20 mm, Year of construction: 2026, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, navigation system, parking heater, power assisted steering, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Power steering - Remote central locking - Refrigerator - LED headlights - Alloy wheels - Lift axle - Air suspension - Fifth wheel coupling - Engine brake - PTO (Power Take-Off) - Radio - Rear view camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Available for immediate delivery: Scania R590 V8 / 8x2*6 wide spread. Color: Ivory White. All-wheel air suspension. 2 x 10,000 kg front axle. Rear axle loads: 11,500 kg + 10,000 kg. Permissible total weight: 41,000 kg. Retarder. 515 cm wheelbase. Gearbox with crawler gear and overdrive. King of the Road. Auxiliary heater with cabin and engine heating. Premium driver's seat. Coffee maker. Refrigerator. Loading platform: Sliding table, 170 cm. Headboard with storage space for ladder and level. 2 x round outrigger, 90 cm. Stainless steel boxes all around. 4 x width marker with lighting. Large continuous box between the axles. Rung. 4 x rung row. Rung supports in side beam. Recessed tie-down eyes in side beam. Twist locks / adjustable in width. Work lights in side beams. Stainless steel rear frame with work lights and flashing lights. Water pipe / (exhaust). Crane: HMF 9520 K7 Pre-setting. Fly jib: FJ 2200 K6 2 x hand part. Winch: HMF 3200, Capacity 3,200 - 2,500 kg. 4.40 m - 17,010 kg. 7.90 m - 9,030 kg. 9.80 m - 7,070 kg. 11.80 m - 5,710 kg. 13.80 m - 4,770 kg. 16.00 m - 4,010 kg. 18.10 m - 3,470 kg. Jib: 21.20 m - 1,705 kg. 22.70 m - 1,545 kg. 24.20 m - 1,410 kg. 25.80 m - 1,295 kg. 27.50 m - 1,195 kg. 29.30 m - 1,115 kg. 31.10 m - 985 kg. 2 Manual extension parts. 33.00 m - 700 kg. 34.90 m - 400 kg. = Further Information = Pedszbqxxepfx Aphjgr Technical information Number of cylinders: 8 Axle configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread left: 100%; Tire tread right: 100% Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 100%; Tire tread right: 100% Rear axle 1: Tire size: 315/70R22.5; Double tires; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 2: Tire size: 385/55R22.5; Steered; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 27,862 kg Payload: 13,638 kg GVW (Gross Vehicle Weight): 41,500 kg Functional Crane: HMF Maintenance APK (Technical Inspection): valid until 05/2027 Financial information Price: On request Identification Model number: R590 - 8x2 WIDE SPREAD / HMF 95 = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information, but no rights can be derived from the information provided in the texts.

Condition: used, mileage: 47,950 km, power: 353 kW (479.95 HP), first registration: 07/2024, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, total width: 2,550 mm, total height: 3,740 mm, Year of construction: 2024, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT Internal Number: #342 MAN TGS 26.480 6x2 -4 BL with combined high-pressure flushing and suction pressure tank body, ADR Type K 14.0 / 28 PE Body: KROLL Fahrzeugbau-Umwelttechnik GmbH * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Outreach on stop side 5,200 mm * Tank material S355J2+N (St. 52.3) * ADR suction/pressure tank vehicle Type K 14.0 / 28 PE * Extension piston with 3 locking points * (3,300l water / 10,600l sludge, 5,500l water / 8,200l sludge, 7,700l water / 6,000l sludge) * Suction from open waters possible "Comfort version" via cassette boom with integrated filter * Tank wagon equipment according to ADR - type class AT/FL L4BH * DISCHARGE: by a pneumatically actuated piston * SLUDGE WATER OUTLET DN 80: for pushing the dirty water back into the sewer via the boom. * Manhole DN500 Chassis: MAN TGS 26.480 * 6x2 - 4BL * TipMatic with OMSI * 470 HP / 346 kW * EURO 6e * Fuel volume 400 l * Chassis color RAL 9010 Pure White * Cab color RAL 9010 Pure White * 2x LED rotating beacons on the cab * Rear view camera * Navigation * Air conditioning Vacuum system * CVS VacuStar 1600 approx. 1,550 cbm/h at 400 bar * Drive: elastic, via universal joints, V-belts and pneumatically switchable friction clutch from the vehicle engine's auxiliary drive. * approx. 20m HD hose DN 125 * HOSE STORAGE CASSETTE WITH SIMULTANEOUS TELESCOPIC BOOM DN 125 * Outreach on stop side 5,200 mm High-pressure system * Uraca KD 718 approx. 315 l/min at 170 bar * Drive: elastic, via universal joints, V-belts and pneumatically switchable friction clutch. * approx. 240m HD hose DN 25 * Large HD hose reel for 240m 1" DN 25, 180° swiveling * Equipped with 240m DN25 * Small HD hose reel for 80m approx. DN 13 hydraulic * Equipped with 80m DN13 Special features * Hose storage cassette with telescopic boom DN 125 * Infinitely adjustable height adjustment of the suction hose hydraulically via roller guide carriage * Outrigger arm for suction hose, hydraulic and telescopic, and swiveling by 180° * ADR design L4BH type class FL incl. EX/II, EX/III and AT * Spray gun * LED rotating beacons * Halogen work spotlights, removable and swiveling * LED ambient lighting * Work functions remotely controlled via CAN-BUS technology * Wireless remote control with 14 functions * Hand washing facility (warm) * Large cabinet at the rear left, e.g. for a sliding camera * Rear view camera with 7" color monitor including day/night switch * Soundproofing panel in front of the pump compartment * WATER SHORTAGE WARNING SYSTEM: with buzzer in the main switch cabinet and automatic pump shut-down. * RESIDUAL WATER DRAINAGE: pneumatic for all water-carrying parts with connection to the truck's compressed air system. * Large equipment box * Tool box * Holder for traffic cones * Vice * Ladder * Large advertising panels left and right * Manhole DN500 Technical data GGW 26,000KG * Unladen weight 18,530 KG * Length 9,280mm * Height 3,740mm * Width 2,550mm * Wheelbase 3,900mm For further detailed information and/or images, please contact us directly. A large selection of other vehicles for PURCHASE or RENT can be found at: . Subject to changes, prior sale and errors. The buyer is obliged to independently verify the condition and equipment of the goods. The sale is exclusively subject to our general terms and conditions and excludes any liability. Podpfx Aexc Sx Isphogr

Condition: used, mileage: 15,634 km, power: 229 kW (311.35 HP), gearing type: mechanical, fuel type: diesel, color: yellow, overall weight: 23,200 kg, empty load weight: 23,200 kg, maximum load weight: 15,000 kg, axle configuration: 4x4, number of seats: 1, first registration: 03/2016, brakes: engine braking, Year of construction: 2016, operating hours: 15,634 h, driver cabin: day cab, Equipment: additional headlights, air conditioning, all wheel drive, cabin, compressed air brake, differential lock, head guard, immobilizer system, onboard computer, parking sensors, power assisted steering, soot filter, standard shovel, * German vehicle * Wheel loader test according to §14 completely available * Condition, see photos * original ONLY 15,634 BH * Driver's cab rollover protection ROPS / stone chip protection FOPS * ROPS/FOPS meet the requirements of the standards ISO 3471:2008 and ISO 3449:2005 Level II * Turning circle (diameter) (counterweight) 6,804 mm * Small turning circle due to articulated steering Pgsdpfx Apsvzav Njhsr * Fuel tank 302 liters * Axles, front axle with manually operated differential lock, rear axle with open differential * Brakes, fully hydraulically encapsulated oil bath disc brakes with integral braking system (IBS) * Planetary powershift transmission (4V/4R), automatic * Detect technologies: rear view camera Cat rear object detection * Immobilizer * Air conditioning, heating and defroster (automatic temperature control and fan control) * Driver's cab with pressurized ventilation and sound insulation (ROPS/FOPS) * Electro-hydraulic control levers, single-axle lever for lifting and tilting function * Electro-hydraulic parking brake * Ergonomic ladders and handrails for cabin access * Warning horn, electric * External rear-view mirror with integrated blind spot mirrors * Multifunctional 18 cm color touchscreen display for image display of the rear view camera, time and machine parameters * Radio including antenna, loudspeaker * Seat with fabric cover, air-suspended * Steering joystick, electro-hydraulic, speed-dependent with force feedback * Sliding window (left and right) * Reverse warning signal * Fender, sheet steel, front with mud flap and rear with extension * Engine hood (plastic) with electric tilting device * Sight glasses: engine coolant, hydraulic oil and transmission oil level * Working hydraulic pump type adjustable piston * ? Maximum travel speed of the standard machine with empty bucket and standard tires (L3) with a rolling radius of 826 mm. * Speed with gears: Forward 1 6.5 km/h Forward 2 13.0 km/h Forward 3 23.5 km/h Forward 4 39.5 km/h Reverse 1 7.1 km/h Reverse 2 14.4 km/h Reverse 3 25.9 km/h Reverse 4 39.5 km/h * Operating weight 23,220 kg If you require a new TÜV inspection, we will be happy to provide you with an offer from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV, without new SP, without new UVV.  You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note:  We offer and strongly recommend an inspection and testing of the goods so that the buyer does not have any false impressions about their quality and suitability. Inspections and tests are possible at any time by appointment and are expressly desired.   All information is provided without guarantee. We are not liable for errors or incorrect information in the offer. The buyer is obliged to check the condition and equipment of the goods/vehicles for themselves. Subject to changes, prior sale and errors. - .

Condition: used, mileage: 2,896 km, power: 434 kW (590.08 HP), first registration: 05/2026, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 5,150 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 11,030 mm, total height: 3,960 mm, loading space length: 6,320 mm, loading space width: 20 mm, Year of construction: 2026, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, navigation system, parking heater, power assisted steering, retarder, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Alarm system - Power steering - Remote central locking - Refrigerator - Leather interior - Alloy wheels - Lift axle - Air suspension - Fifth wheel coupling - Engine brake - PTO (Power Take-Off) - Radio - Rear view camera - Disc brakes - Sun visor - Spotlights - Auxiliary heater - Toolbox = Notes = Available for immediate delivery: Scania R590 V8 / 8x2*6 wide spread. Ivory White color. Air-sprung all-round. 2 x 10,000 kg front axle. Rear axle loads: 11,500 kg + 10,000 kg. Permissible total weight: 41,000 kg. Retarder. 515 cm wheelbase. Gearbox with crawler gear and overdrive. King of the Road. Auxiliary heater with cab and engine heating. Premium driver's seat Coffee machine. Refrigerator. Load bed: Sliding table 170 cm. Headboard with storage space for ladder and level. 2 x round outrigger box 90 cm. Stainless steel boxes all around. 4 x width marker with lighting. Large continuous box between the axles. Rongs. 4 x rong row. Rong pots in side beam. Recessed tie-down eyes in side beam. Twist locks / adjustable in width. Work lights in side beams. Stainless steel rear frame with work lights and flashers. Water pipe / (exhaust) Crane: HMF 9520 K7 Pre-positioning. Fly jib: FJ 2200 K6 2 x manual section. Winch: HMF 3200, capacity 3,200-2,500 kg. 4.40 m - 17,010 kg. 7.90 m - 9,030 kg. 9.80 m - 7,070 kg. 11.80 m - 5,710 kg. 13.80 m - 4,770 kg. 16.00 m - 4,010 kg. 18.10 m - 3,470 kg. Jib: 21.20 m - 1,705 kg. 22.70 m - 1,545 kg. 24.20 m - 1,410 kg. 25.80 m - 1,295 kg. 27.50 m - 1,195 kg. 29.30 m - 1,115 kg. 31.10 m - 985 kg. 2 manual extension sections. 33.00 m - 700 kg. 34.90 m - 400 kg. = Further Information = Technical Information Number of cylinders: 8 Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/55R22.5; Steerable; Tire tread left: 100%; Tire tread right: 100% Front axle 2: Tire size: 385/55R22.5; Steerable; Tire tread left: 100%; Tire tread right: 100% Rear axle 1: Tire size: 315/70R22.5; Double tires; Tire tread left inside: 100%; Tire tread left outside: 100%; Tire tread right inside: 100%; Tire tread right outside: 100% Rear axle 2: Tire size: 385/55R22.5; Steerable; Tire tread left: 100%; Tire tread right: 100% Weights Unladen weight: 27,862 kg Payload: 13,638 kg GVW: 41,500 kg Functional Crane: HMF Interior Upholstery: Leather Maintenance APK (Technical Inspection): valid until 05/2027 Financial Information Price: On request Identification Model number: R590 - 8x2 WIDE SPREAD / HMF 95 = Company Information = Pgedpjzb U Idsfx Aphsr ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We strive to provide accurate information, but no rights can be derived from the information in the texts provided.

Condition: good (used), Year of construction: 2004, Built in 2004 Configuration: Left-hand delivery Equipped with: Left-hand delivery Mosca strapping unit Applications: Offset and gravure signatures Pgedpfx Aozub Uvephjr Mechanical Infeed Speed: Maximum 1.0 m/s Cycle Time: Minimum 32 s/log Signature Sizes: Minimum: 200 × 110 mm (7 7/8" × 4 3/8") Maximum: 480 × 320 mm (18 7/8" × 12 5/8") Page Count: Depending on paper quality and basis weight Minimum: 4 pages Maximum: 144 pages Compressed Log Length: Standard machine: 800 to 1,200 mm (31 1/2" to 47 1/4") With special insert (optional): 500 to 860 mm (19 3/4" to 33 7/8") Strapping System: Mosca Strapping Material: 12 mm (15/32") wide PP or PET strap Endboard Hopper Capacity: Maximum 100 endboards with 10 mm (3/8") thickness Endboard Thickness: Minimum: 5 mm (3/16") Maximum: 13 mm (1/2") Endboard Insertion: Automatic Shingle Spacing: Minimum 30 mm (1 1/8") Shingle Side Variation: Maximum ±15 mm (5/8") Power Consumption: Approx. 4.5 kW (with manual crane) Approx. 4.0 kW (without manual crane) Air Consumption: 5 Nm³/h at 6 bar (3 cfm at 90 psi) Machine Weight: 4,100 kg (9,000 lb)