Used External Micrometer for sale (5,188)

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Bsdpfxsx Ag R Sj Ac Njdk Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: used, mileage: 2,54,445 km, power: 103 kW (140.04 HP), fuel type: diesel, gearing type: mechanical, first registration: 07/2010, emission class: euro5, color: red, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), immobilizer system, parking heater, soot filter, Internal vehicle number: 11053 Special equipment: Bjdpfxjuqg Nqs Ac Nedk Rubber floor covering in load/passenger compartment, Electrical package 1, Electrical interface for external use (CAN data bus), Chassis: Suspension and damping reinforced (suitable for poor road conditions), Windows in load/passenger compartment: - sliding 1.Rear wing doors with glazing, rear window heatable, with wiper system, interior unlocking tailgate / rear wing doors, Isofix mountings for child seat on rear seat, radio preparation, 2 loudspeakers, spare wheel with driving tires, seats in driver's cab: double passenger seat, seats in load/vehicle compartment: 1st row, 2-seater bench seat + 2-seater bench seat + 2-seater bench seat + 2-seater bench seat + 2-seater bench seat + 2-seater bench seat.2nd row, 3-seater bench seat (coil spring), lashing eyes in load compartment, auxiliary heater, gross vehicle weight 3.80 t Further equipment: Airbag driver/passenger side, Exterior mirrors aspherical, left, Exterior mirrors convex, right, Floor covering in cab: Rubber, Driver assistance system: Brake assist (HBA), Window in load compartment/FG compartment: - fixed, rear left, Window in load compartment/FG compartment: - Fixed, rear right, Window in load/cargo compartment: - Fixed, front left, Cabin filter: Pollen filter, Body/construction: Estate, Body variant: Normal roof, Child safety lock on sliding doors, Headlight range adjustment, Engine 2.0 Ltr. - 103 kW TDI, Non-smoking package, Wheelbase: 3400 mm, Headlights H4, Sliding door loading/passenger compartment right, Seat cover/upholstery: Fabric, Seats in cab: Adjustable driver's seat, Cladding in loading/passenger compartment: Half-height hardboard, Heat-insulating glazing

Condition: new, Year of construction: 2024, operating pressure: 250 bar, total length: 878 mm, high-pressure hose length: 10,000 mm, total height: 702 mm, total width: 538 mm, empty load weight: 57 kg, fuel: super 95, warranty duration: 24 months, We offer for sale the HD 9/25 G Classic petrol-powered high-pressure washer. Condition: New Year of manufacture: 2024 Technical specifications: - Pump performance (l/h): 900 - Working pressure (bar): 250 - Maximum pressure (bar): 300 - Water connection: R 3/4″ - Drive type: petrol - Engine type: G390FA - High mobility - Colour: anthracite - Weight with accessories (kg): 56.8 - Dimensions (L x W x H) (mm): 878 x 538 x 702 Scope of delivery: - Standard spray gun - 10 m high-pressure hose - Crankshaft pump with ceramic pistons - Power nozzle - Protection frame - Water filter Features: Independence - No reliance on external power sources. - Compliant with EU STAGE V emission standards. - Convenient manual start. High mobility - Puncture-proof wheels. - Compact and easy to manoeuvre in confined areas. - Fits inside a vehicle. Robust and durable design - Sturdy tubular frame protects the pump from damage. - High-pressure pump equipped with a safety valve and water filter. - Crankshaft pump with ceramic pistons. Accessory storage - Holder for power leads and accessory compartment for easy storage and transport. Bodpex At R Ejfx Ac Nedk - Ergonomic handle and convenient hose storage. The HD 9/25 G Classic cold-water high-pressure cleaner, with a working pressure of up to 250 bar, a delivery rate of 900 litres per hour, and a durable crankshaft pump, is designed to handle even the most demanding cleaning tasks. Its high-performance EU STAGE V petrol engine eliminates the need for external power sources. Sturdy tubular steel frame and puncture-proof tyres make it ideal for challenging tasks on construction sites, in industry, municipal areas, or service companies in the construction sector. The ergonomic handle, very compact dimensions, and dedicated accessory holders (e.g., for high-pressure hose and lance) simplify operation and allow for easy transport by vehicle. All major components are easily accessible for servicing and are effectively protected by thermal and safety valves. Please note: The machine does not support suction from alternative water sources.

Year of construction: 1987, condition: used, pipe diameter (max.): 90 mm, pipe length (max.): 14,000 mm, FEEDSTOCK TUBE .. external diameter max.: 90 mm .. lenght max.: 14000 mm CHARACTERISTICS DRAWING MACHINE .. force: 250 kN .. number of parallel trains / strands max.: 3 For Sale: High-Performance Triple Drawing Bench GKZ 250 / 3-19R – Precision, Power & Reliability Offered for sale is a Triple Drawing Bench, type GKZ 250 / 3-19R, manufactured by Bültmann Maschinenbau GmbH & Co. KG, a renowned German company known for high-quality tube drawing technology. This system stands out for its robust design, impressive pulling force, and flexible adaptability for a wide range of tube dimensions and materials. Technical Data Year of Manufacture: 1987 Manufacturer: Bültmann Maschinenbau GmbH & Co. KG Location: Hall 7 / 8 Floor Space: 6 x 35.5 m = 213 m² Installed Power: 355 kW Operating Personnel: 1 person Performance Specifications Number of Tubes per Draw: 1, 2 or 3 Input Tube Outer Diameter: 8 – 90 mm Input Tube Length: 3,000 – 11,000 mm Finished Tube Wall Thickness: 0.5 – 4.0 mm Finished Tube Length: up to 14,000 mm Maximum Drawing Force: 250 kN at 6 m/min 250 kN at 60 m/min 186 kN at 90 m/min Return Speed: 180 m/min Noise Level: < 85 dB without material Equipment & Components Tube storage and magazine Pre-bench with mandrel rods Die stand with exchangeable cassette Bdedpexql Eqsfx Ac Nsk Drawing bed with drive Drawing carriage with clamping jaw Cross-travel tube receiving table Tube cradles No. 1 and No. 2 Operator platform Hydraulic power unit Mandrel rod magazine Technology & Control Hydraulics: Rexroth Pneumatics: Festo Electrical Control System: Siemens Highlights This triple drawing bench has been well maintained and remains in excellent working condition. Thanks to its modular design and strong performance, it is ideal for companies requiring precise and efficient tube drawing – from single draws to continuous production.

Condition: new, Year of construction: 2025, total length: 1,010 mm, total width: 1,010 mm, total height: 2,010 mm, mesh size: 10 mm, We manufacture in Ukraine a heavy-duty stainless steel drying trolley, specifically designed for industrial and semi-industrial production of meat and fish snacks, raw-cured sausages, jerky, and pet treats. The trolley is fully compatible with our RK50U, SAS200, and FARS200 systems, and is ideal for use in drying chambers, smokehouses, and climate-controlled environments equipped with air dehumidifiers. The external dimensions of the trolley are 2000 × 1010 × 1010 mm. The frame is constructed from corrosion-resistant AISI 304 stainless steel, using a robust 40 × 40 × 1.5 mm profile. It features 30 levels with a 55 mm gap between each tier and is equipped with special locking mechanisms to prevent trays from falling during movement or operation. Bedpfx Asrftxfjc Njdk For easy maneuvering, the trolley includes six heavy-duty pendulum swivel casters (Ø125 mm), enabling rotation on the spot, even when fully loaded. Each trolley comes with 60 stainless steel trays, each measuring 900 × 500 mm. The trays are made from corrugated stainless steel wire mesh, available in 12×12 mm or 10×10 mm configurations. The wire thickness is 0.95 mm, ensuring excellent structural rigidity. Each tray includes a 15 mm high perimeter rim to promote optimal airflow and heat convection. A reusable, non-stick Teflon insert is included with each tray—perfect for sticky or soft products such as minced meat sticks, fish strips, or salami-style snacks. The total load per trolley is approximately 600 kg, with up to 10 kg of evenly distributed product per tray. The design supports both high- and low-temperature drying, and the trolley fits seamlessly into chambers with either horizontal or vertical airflow. It is optimized for easy cleaning and maintenance. This trolley is engineered for efficient moisture removal and uniform air distribution across all product levels—ensuring optimal drying performance and extended shelf life. Pricing & Availability • New set with 10×10 mm mesh and Teflon inserts: €3,500 (in stock in Vilnius, Lithuania EU) • Used set with 5×5 mm mesh, no Teflon: €2,300 (excellent condition, 7 units available) We deliver across the EU (Poland, Lithuania), UK, Ukraine, Australia and internationally. For technical drawings, a custom offer, or export documentation, feel free to contact us.

Year of construction: 2023, operating hours: 50 h, condition: ready for operation (used), General Data Measurements width 1300 mm Measurements depth 1900 mm Measurements height 2500 mm Machine weight 2000 kg Bdjdpfjxzlp Dox Ac Nsk Main Drive Number of axis 6 Additional Equipment Vice Pallets: 18 Shelving System: Adjustable levels for up to 18 pallet spaces Valve Terminal: For controlling external elements Safety Package: Movable safety fence and safety software This 6-axis WU Automation RZ-3/35 was manufactured in 2023. A versatile robot cell with a compact design, it features a 6-axis robot capable of handling up to 35 kg. It includes an intuitive graphical interface, Schunk NSR 100 and JGP 125 gripper systems, and a safety package with movable safety fence. Ideal for efficient, flexible operations with minimal setup times. Compatible with all Hermle machines. If you are looking to get high-quality automation capabilities consider the WU Automation RZ-3/35 machine we have for sale. Contact us for more information. Application Types Other Automation Equipment

Condition: used, maximum load weight: 27,520 kg, overall weight: 37,000 kg, axle configuration: 2 axles, first registration: 03/2018, next inspection (TÜV): 03/2025, loading space length: 18,100 mm, loading space width: 3,000 mm, total width: 2,550 mm, total height: 2,880 mm, Equipment: ABS, Trailer extendable by 4500 to 18100 mm overall length, widenable to 3000 mm, low loader with 4 wheel recesses, low bed 6500 mm, high bed 2770 mm, gooseneck: 3690 mm, retractable gooseneck, remote control, electro-hydraulic power unit for hydraulic functions, NATO external starter socket, Duo-Matic coupling heads, 6 heavy-duty lashing rings per side, 9x lashing eyes per side, central lubrication system, extendable warning plates, ABS, EBS, BPW EcoPlus axle(s), axles hydr. forced steering, drum brake system, air suspension with lifting and lowering device, vehicle can be fitted with advertising and/or lettering Our offer is generally without new TÜV approval. If a new TÜV inspection is required, we will be happy to make you an offer from our partner workshops! Vehicle can be covered with advertising and/or lettering. Our general terms of delivery and payment apply. We would be pleased to make you a financing or leasing offer for this object. Please contact us! Bsdpfsxzxmcjx Ac Nsdk

Year of construction: 2020, operating hours: 8 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 866071473, For sale is a Hobart AUPT-10A Premax double hood-type dishwasher, year of manufacture 2020. The machine is in like-new condition, with only 8 operating hours. This premium hood-type dishwasher offers double capacity, allowing simultaneous washing of two racks. The PERMANENT-CLEAN soil removal feature conveys coarse dirt into an external strainer, reducing operating costs and protecting the machine. To ensure hygienic rinse temperatures even when connected to a cold water supply, the dishwasher has an automatic program time extension. For corner installations, we recommend leaving the right side of the machine accessible for maintenance purposes. We recommend water treatment from a water hardness of 1°dH. The machine has been professionally tested for functionality in our in-house workshop and is both technically and visually in like-new condition. List price (RRP) of the machine: €36,235 (net) You will receive an invoice with VAT shown separately. Our used equipment service for you: - 6-month warranty on electrical components, limited to replacement of defective parts (installation and removal costs excluded) - High-quality branded equipment at fair prices - Professional refurbishment / inspection & expert cleaning - Tested & fully functional – or your money back - Flexible shipping or collection options - Competent advice – before and after purchase - Provision of operating manuals, wiring diagrams & spare parts - Safety inspection according to DGUV V3 The machine comes with the following features: - PERMANENT-CLEAN soil removal: Revolutionary filtration system eliminates the need for manual pre-rinsing. All fine and coarse residues are immediately transported to an external strainer, saving operating costs and protecting the machine. - VISIOTRONIC-TOUCH control: Color touchscreen display with text and graphics, featuring single-button operation and remaining cycle time display. - SENSO-ACTIVE resource management: The control monitors the tank soiling in real time and automatically adjusts rinse water consumption to the degree of contamination. - CLIP-IN wash and rinse arms - POWER-PLUS WASH PROGRAM: Optional high-pressure cycle for cleaning heavily soiled ware and utensils. - ROTOR-X WASH SYSTEM: Cross-wash arms and special wide-angle nozzles optimize water distribution and maximize contact time with the washware. Technical data: - W x D x H: approx. 1345 (+200 Permanent Clean System) x 915 x 1510 mm - Height with hood open: approx. 1995 mm - Power connection: V: 400 / kW: 23.5 / A: 36.1 / Hz: 50 - Weight: 252 kg - Serial number: 866071473 - Year of manufacture: 2020 Condition: Like-new, fully functional Bodpsxz Ey Nefx Ac Nedk Further details: - Rack size: 500 x 500 mm - Tank volume: approx. 80 liters - Water consumption: approx. 1.4 L/rack - Insertion height: 440 mm - Capacity up to max. 140 racks/hr, 2,520 plates/hr, 5,040 glasses/hr - 8 automatic programs: short, standard, intensive, eco, continuous wash, cutlery, hygiene, and starch removal programs. - Heat and sound-insulated hood - Self-cleaning program - Filter contamination sensor Shipping: - Delivery or collection by arrangement - Worldwide shipping on request - Shipping to islands or mountain stations only by arrangement

Year of construction: 2017, condition: ready for operation (used), - USED - TRAVELLING COLUMN CNC MILLING MACHINE WITH AUTOMATIC A/B-AXIS HEAD LONGITUDINAL TRAVEL: 3000 mm TRANSVERSAL TRAVEL: 1100 mm VERTICAL TRAVEL: 1500 mm Bodpfxsumpd As Ac Nedk RAPID FEEDS L-T-V: 35 m/min TABLE SIZE: 3100 x 1000 mm HEAD: CONTINUOUS ; ISO 50 ; 8000 rpm; 25/33 kW; 480/640 Nm TOOL MAGAZINE: CHAIN-TYPE ; 24 POS CONTROL UNIT: HEIDENHAIN TNC 640 HIGH PRESSURE COOLANT: 15 Bar WEIGHT: 30500 Kg OVERALL DIMENSIONS: 8000 x 5320 x 4265 mm ACCESSORIES: SWARF CONVEYOR ; ETHERNET PORT ; LINEAR SCALES ; PORTABLE HANDWHEEL ; THROUGH-SPINDLE AIR BLAST NOTE: LASER TOOL SETTER BLUM; TOUCH PROBE RENISHAW RMP-60; EXTERNAL SPINDLE SPRAY MIST LUBRIFICATION; GUARD FOR PENDULUM MACHINING

Condition: used, mileage: 32 km, power: 74 kW (100.61 HP), fuel type: diesel, gearing type: mechanical, overall weight: 1,965 kg, first registration: 07/2025, loading space length: 1,802 mm, loading space width: 1,535 mm, loading space height: 1,262 mm, emission class: euro6, color: grey, number of seats: 2, total length: 4,337 mm, total width: 2,076 mm, total height: 1,827 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal number: 82622 Errors and prior sale excepted! ----LOCATION: 04758 Oschatz, Filderstädter Straße 10 Contact phone number: Bedpfow E Uwusx Ac Nsdk Mr. Enrico Schieler: 03435 ? 90 90 22 or ---- SPECIAL EQUIPMENT * Driver Assistance Package 2: Ford Audio – Pre-Collision Assist, camera-based – High Beam Assistant – Lane Keeping Assistant including Lane Departure Warning – Cruise Control – Intelligent Speed Limiter with Speed Limit Display – Driver Drowsiness Alert – Wrong-way Warning Function – Traffic Sign Recognition System – Park Pilot System front + rear – Rearview Camera – Power windows front, with Quick Up/Down function for driver and passenger * Halogen Headlights with LED Daytime Running Lights including headlamp surrounds in black * Full-length rear cargo mat * Sliding doors, right and left * Winter Package 3: Heated windscreen – Heated steering wheel – Seat Package 6: - Driver's seat 6-way adjustable and heated – Passenger seat foldable, retractable, and heated – Driver’s lumbar support – Driver’s armrest – Partition with loading hatch, no window FURTHER EQUIPMENT * 12-volt socket, in passenger compartment * Passenger airbag – with deactivation function * Driver airbag * Side airbag – right and left * Exterior mirrors, electrically adjustable and heated, in plastic * On-board computer with fuel consumption and mileage data (e.g., remaining range) and external temperature display * Diesel particulate filter (DPF) * Twin rear doors * Tachometer * Third brake light * Electronic safety and stability program * Remote control for central locking with two folding keys * Ford Easy Fuel – Capless refueling with misfueling protection * FordPass Connect * Rubber mat in driver’s cab * Glove compartment with lid * Interior lighting with delay function and front reading lights * Manual air conditioning * Cargo area lighting * Steering wheel: Audio remote control on steering wheel * Large center console * Fog lights * Emergency brake light – pulsating brake light during heavy braking * Emergency call assistant * Seat Package 3 – Driver’s seat, 6-way adjustable – Passenger seat, 4-way adjustable – Driver's lumbar support – Driver’s armrest – Full partition, no window (steel) * Upholstery: Cloth City * Radio accessories: USB ports, front * Tire repair kit * Tire pressure monitoring system * Wheels: Steel rims 6 J x 15 – 195/65 R 15 tires * Windshield wiper interval control * Sliding door, right * Seatbelts – Belt pretensioner and force limiter front – Warning system for unfastened seatbelt for driver and passenger * Sun visor, passenger side with mirror * Sun visor, driver’s side with ticket holder and mirror * Start-stop system * Daytime running lights * Immobilizer * Central locking with remote control * Overhead console ...and much more.----First owner. German specification. Errors and prior sale excepted. 2 years factory warranty from first registration (can be extended upon request). We are happy to take your vehicle in part exchange. Financing/leasing possible even without a down payment! Do you have any questions? We are happy to advise you! Please note: Despite ongoing checks, deviations of the vehicle from the above description cannot be excluded. The vehicle description solely serves general identification purposes and does not constitute a guarantee in the legal sense.

Condition: used, Technical details: material thickness: 1,0 mm material width: 17,0 mm internal diameter: 30,0 mm external diameter: 78,0 mm Spare part for bench drill BT 2 Bodpfx Aju N E Evsc Njdk Patt spring - Return spring - Spiral spring Declaration of conformity according to ISO/IEC 17050-1 Acceptance test certificate 3.1 according to DIN EN 10204 available *

Year of construction: 1998, condition: ready for operation (used), General Data Measurements width 5100 mm Measurements depth 10500 mm Measurements height 4900 mm Machine weight 51000 kg Control Unit Brand SIEMENS Model SINUMERIK 840D Additional Equipment Automatic Tool Changer: Included / Number of Places in the Magazine: 90 / Max. Tool Diameter: 125 mm (300 mm with free secondary positions) / Max. Tool Length: 450 mm/ Max. Tool Weight: 30 kg /Tool Change Time: Approx. 5 sec Compressed Air Connection / Air Volume: 6 bar - 5 m³/h / Nominal Voltage: 3 AC 400 V / Control Voltage: DC 24 V / Connected Load: Basic machine 65 kW Cooling Lubricant Supply and Filter System: Included / Tank Capacity: 1500 l / Pump for External Cooling: Q= 20/40/60 l/min switchable / Pump for Internal Cooling: Q= 35 l/min at 50 bar Work Area Guard with Lighting: Included / Set of Chip Conveyors: Included, with scraper belt type, discharge height 1000 mm Bdodpoxzlu Tjfx Ac Nok This 4-axis MIKROMAT 20V gantry milling machine was manufactured in 1998. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this MIKROMAT 20V gantry milling machine. Contact us for more information. Application Types Milling

Condition: used, Year of construction: 2020, Technical details: max. wheel diameter: 100 mm Bdsdpfx Asxz Ahkoc Njk total power requirement: 13 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 3,30 x 4,70 x 3,50 m diameter of milling arbor: 22 min max. length of teeth cutting: 165 mm Hob lenght max. : 219 mm slide travel radial ( X-axis ): 90 mm slide travel tangential ( Y-axis ): 160 mm slide travel axial ( Z-axis ): 320 mm 1 Gleason 100PSic rolling/peeling machine, year of manufacture 2020 with integrated IFS EC1500 industrial filter, 1 external Knoll KF200/640 sediment separator, year of manufacture: 2017 1 integrated chip conveyor with magnetizing separator 1 machine automation system for loading and unloading workpieces *

Condition: used, functionality: fully functional, High-quality 40-foot containers in bulk at attractive conditions We are currently offering a larger batch of 120 used 40-foot containers in good condition from Hannover—ideal for storage, transport, or interim warehousing. The containers are in good and watertight condition and available immediately. Take advantage of tiered pricing: When purchasing three or more units, you benefit from attractive price reductions, with the unit price decreasing as your order volume increases. OVERVIEW ✅ Standard Container (40 DV) – the classic solution for large storage and transport volumes • External dimensions: 12,192 × 2,438 × 2,591 mm • Internal dimensions: 12,032 × 2,352 × 2,390 mm • Door opening: 2,338 × 2,280 mm • Volume: 67.7 m³ • Weight: 3,750 kg DELIVERY AND AVAILABILITY ✅ Immediate availability: The containers can be collected or delivered at short notice. ✅ Delivery options: Depending on your location, we can organize a reliable transport solution; we are happy to clarify delivery dates and terms in advance. INSPECTION ✅ On-site inspection is possible by appointment, so you can check the condition and features of the containers firsthand. ✅ Please contact us to arrange an appointment or to receive detailed information. CONTACT ✅ Interested? Get in touch with us directly, secure your allocation, and receive a tailored offer including tiered pricing, delivery timeframe, and further details. Bsdoxzqu Sopfx Ac Njdk ✅ We look forward to your inquiry and are always happy to answer any questions you may have. MAGITU GmbH

Condition: used, total height: 1,550 mm, total length: 1,600 mm, total width: 1,200 mm, Empty weight: 2.100 kg - Documentation available: No - CE marking present: Yes - CE certificate present: No - Control: Conventional - Motor power: 4.5kW - Center distance: 480mm - Model: inderslijper extern - Travel X: 700mm - Center height: 100mm - Grinding diameter: 200mm - Travel Y: 100mm - Table length: 1150mm - Table width: 130mm - Transport dimensions: 1600mm x 1200mm x 1550mm (l x w x h) Bdjdjwnh Tzopfx Ac Nsk - Transport weight [kg]: 2100kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2020, operating hours: 1,675 h, load capacity: 1,400 kg, lifting height: 5,016 mm, fuel type: electric, mast type: triplex, construction height: 2,165 mm, mileage: 1,675 km, JUST IN Bsdpex Ah Uxefx Ac Njdk This electric DUO stacker by Still from 2020 is in good condition; Capacity is 2,000 kg; Lifting height up to 5,016 mm; Drive-through height 2,165 mm; Equipped with FREELIFT; Also features an INITIAL LIFT, making it ideal for uneven floors; ONLY 1,675 hours on the clock; Battery is equipped with an automatic filling system and an external charger; Schedule a test drive. Video to follow.

Condition: used, Year of construction: 2016, Industrial automatic edge bander SOLUTION XD MAIN FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: ONE "TOUCH" IS ENOUGH TO OPERATE THE MACHINE. STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE. BANDING OF ROLLED MATERIAL, STRIPED EDGES, AND SOLID WOOD EDGES. GENERAL FEATURES: Single-sided edge bander in left-hand design for gluing rolled materials and strip edges using all conventional hot melt adhesives. The base frame consists of a sturdy, highly rigid steel welded stand, which provides optimal support for the processing units. The upper pressure consists of a thick-walled steel profile and a double trapezoidal drive belt that is automatically positioned to the panel thickness. Height adjustment with display on the top pressure and on the operator interface. Manual workpiece feeding system with a generously dimensioned work line and enlarged support surface facilitates the feeding of large workpieces. Adjustable infeed ruler for two positions with automatic selection for processing with or without pre-milling. Working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal beam for precise reference in relation to the panel. All high-frequency motors are powered by frequency converters (inverters). The unit is equipped with its own inverter for optimal flexibility and improved production times. The cleaning hood for all units positioned after the gluing unit is equipped with polycarbonate windows to ensure a good overview of the units during processing. The interior lighting of the cleaning hood is lined with sound-absorbing material for lower noise emissions during processing. The spacers on the infeed ruler allow the machine to be fed at the correct distance. The distance is automatically adjusted to the selected feed speed. The exhaust nozzles are arranged on the pivoting control panel, positioned in the infeed area, and are adjustable for ergonomic electrical installation in compliance with current regulations. The electrical component is housed in a metal casing, fixed to the machine frame and equipped with doors for easy access in case of any problems. The standard voltage is 400 V EU 50 Hz (with neutral). The material is fed by a feed chain with 80 mm wide chain plates made of rubberized nylon for optimal guidance and a high chain tension. The chain slides on two guides made of hardened and ground steel, one round and one flat, to ensure linear feed and prevent lateral misalignment. Automatic chain lubrication. The amount of lubricating oil is controlled by the control system according to the panels being processed. The storage roller conveyor is external and positioned along the entire length of the machine; it consists of an opening system that can be extended up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCHPC control system for quick and easy execution of the main functions which includes:– Editing of programs in Just in Time mode– Possibility of management via parts lists– Possibility of management by Bdodpfxexy Tm Ij Ac Nok

Condition: used, Year of construction: 2002, Burkhart & Weber MCX 900 – 4-Axis Machining Center - Siemens SINUMERIK 840D CNC control - Double pallet changer, pallet at loading station rotatable, total pallets: 6 - Rack-type tool magazine with 264 tool positions and tool setup station for loading during runtime - Rapid traverse X/Y/Z: 40 m/min / B-axis: 20 rpm - Max. machining force X/Y/Z: 20 kN / Tangential torque B-axis: 20,000 Nm - Renishaw wireless probing system - Year of manufacture: 2002 Technical Data Working ranges: - X-axis: 1,600 mm - Y-axis: 1,400 mm - Z-axis: 1,500 mm - B-axis: 360° / 0.001° Speeds: - Spindle speed: 20 – 6,000 rpm - Gear ranges (2): 20–1,400 / 1,401–10,000 rpm Feed rates and forces: - X/Y/Z-axis rapid traverse/feed: 40,000 mm/min / 20,000 N - B-axis speed/torque: 20 rpm / 20,000 Nm Tool magazine: - Magazine type: rack magazine - Number of tools: 264 Tools: - Max. tool weight: 60 kg - Max. tool length: 560 / 750 mm - Tool holder: DIN 69893 / HSK A-100 - Tool clamping force: 40 kN Pallets: - Pallet size: 800 x 1,000 mm - Pallet changer: double - Pallet weight: 800 kg - Max. allowable pallet weight: 3,150 kg - Pallet design: T-slots - Workpiece loading station: manually rotatable (4 x 90°) Coolant system: - Internal coolant (through tool): 30 l/min / 50 bar - External coolant: 200 l/min / 4 bar Drive power: - S1 operation 100% duty cycle: 37 kW - S6 operation 40% duty cycle: 50 kW Electrical: - Voltage: 3 x 400 V / 50 Hz +10% Bdodpfx Acexxbbwj Nek - Control voltage: 230 V AC / 24 V DC - Rated current: 130 A - Connected load: 65 kW / 75 kVA Hydraulics: - Tank: 240 l - Pressure: 60 bar Pneumatics: - Pressure: 4 – 6 bar - Consumption: 10 m³/h

Condition: used, Price: On request - Documentation available: No Bdsdpfxjw Sk Dvj Ac Nok - CE certificate present: No - Control: Conventional - Center distance: 1000mm - Model: inderslijper extern - Travel X: 1000mm - Center height: 135mm - Grinding diameter: 270mm - Travel Y: 600mm - Table length: 1500mm - Table width: 130mm Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2020, operating hours: 1,567 h, load capacity: 1,400 kg, lifting height: 5,316 mm, fuel type: electric, mast type: triplex, construction height: 2,265 mm, empty load weight: 1,600 kg, mileage: 1,567 km, JUST IN This 2020 Still electric triplex stacker is in excellent condition; ONLY 1,567 hours The capacity is 1,400 kg; The stacker lifts up to a height of 5,316 mm; Overall passing height 2,265 mm; Equipped with FREELIFT; The battery features an automatic filling system and an external charger; Schedule an appointment for a test drive. Video to follow. Bdodpjx Ah Ufsfx Ac Nsk

Condition: used, Year of construction: 2011, AXA DBZ 40 - Vertical Twin-Station Machining Center - Heidenhain iTNC 530 CNC control with digital drive regulation - CNC with all controls on a movable control panel - Pendulum package - Increased spindle speed 30 - 8,000 rpm - 2 AXA RTA 2-300 face plates, 300 mm diameter, center height 200 mm - Counter bearing size 50, hydraulically clamped, center height 200 mm - Swiveling of rotary table axis by hand - Machine table extensions left & right 1350 mm each - Heidenhain direct linear measuring system on all axes - Hardened precision steel guides mounted on hand-scraped or ground bases – counter guides coated with Turcite - X-/Y-base slide, Z-column, slides, and headstock made from high-quality cast iron - Coolant system with integrated 100 l tank and pump for external cooling - Coolant through the spindle - Chip conveyor, mounted on the left - 2 IFS oil and emulsion mist extraction units - Spindle dust protection package (wipers) - Oil level monitoring - Automatic sliding doors - 2 hand cleaning guns - Spindle renewed in 2022 - Year of manufacture: 2011 Technical Data - X-axis travel: 2x 750 mm - Y-axis travel: 500 mm - Z-axis travel: 600 mm - Distance table to spindle nose: 180 - 780 mm Machine table: - Clamping area left and right: 1350 x 500 mm each - T-slots (3): 14 mm - Table load capacity with uniform, distributed load: 800 kg/m² Accuracy according to AXA inspection protocol: - Repeat accuracy: ± 0.005 mm - Positioning accuracy per 1000 mm per axis X/Y/Z: 0.015 mm Feed rates: - Max. feed force: 9000 N - Rapid traverse in X/X/Z: 25 / 25 / 20 m/min - Feed rate in all axes: 1 - 9999 mm/min Main drive / Spindle: - Main drive AC - hollow shaft motor 40 % duty cycle: 30 kW - Speed range, stepless: 30 - 8000 rpm Bedpfx Asxu Ezmec Nsdk - Spindle torque 40 % duty cycle: 143 Nm - Tool clamping: by drawbolt / disc springs - Tool clamping force: 12000 N - Spindle diameter in front bearing: 65 mm - Tool holder / drawbolt: SK40 DIN69871A/69872A Tool changer: - Carousel magazine slots: 22 - Tool change time: approx. 7 s - Chip-to-chip time: approx. 9 s - Max. tool weight / max. tool length: 8 kg / 400 mm - Tool diameter / with free adjacent pockets: 85 / 135 mm General data: - Electrical connection: 3x 400/230V/N/PE - Control voltage: DC 24 V - Dimensions (LxHxD): approx. 4200 x 2700 x 2300 mm - Weight: approx. 8,500 kg

Condition: used, Dimensions (LxBxH): 135 x 55 x 102 cm Boe-Therm Temp 300 – Oil Heating Unit Serial number: 83054 Type: Temp 300-36-4 VE General Data - Medium: Thermal oil - Oil capacity: 98 liters - Max. temperature: 300 °C - Heating capacity (kW): 36 kW - Voltage: 3 x 400 V / 24 V - Frequency: 50 Hz - Power consumption: approx. 54.8 A - Control system: Electronic panel with digital display and control buttons - Safety features: Overtemperature, oil level, and pressure monitoring Applications - Temperature control in plastics industry (injection moulding, extrusion) - Metal processing (heating systems, forming presses) - Woodworking (veneer presses, laminating presses) - Other processes requiring stable and high temperatures Bjdpfx Aexpva Aoc Nsdk Function The unit heats thermal oil and circulates it through external circuits (such as moulds, press plates, or installations). This ensures a constant temperature up to 300 °C, with high precision and reliability. - Documentation available: No - CE certificate present: No - Serial number: 83054 - Transport dimensions: 1350mm x 550mm x 1020mm (l x w x h) - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2010, load capacity: 1,600 kg, fuel type: electric, mast type: duplex, JUST IN Acquired through trade-in Electric forklift of the Still brand from 2010 in good condition: Capacity: 1,600 kg Lifting height up to xxx Overall lowered height xxxxx Bodsx Ag Sispfx Ac Nodk Hours on the meter Equipped with FREELIFT Equipped with SIDESHIFT Battery with external charger Video will follow

Condition: used, Year of construction: 2008, total height: 2,750 mm, total length: 2,900 mm, total width: 2,400 mm, Empty weight: 8.500 kg Price: On request - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: MB116360 - Drive system: CNC - Horizontal/vertical: vertical - Control system brand: Siemens - Number of axes [pcs]: 3 - X-axis travel [mm]: 1100 - Y-axis travel [mm]: 650 - Z-axis travel [mm]: 600 Bdjdpfx Asxta Nioc Nok - Table length [mm]: 1300 - Table width [mm]: 650 - Tool holder: SK40 - Max. spindle speed [rpm]: 8000 - Options: Chip collection tray, Chip conveyor, External cooling, Tool magazine, Machine-vice - └ Tool magazine [pcs.]: 24 - Transport dimensions: 2900mm x 2400mm x 2750mm (l x w x h) - Transport weight [kg]: 8500kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: good (used), Year of construction: 2018, operating hours: 4,587 h, load capacity: 1,600 kg, lifting height: 4,620 mm, fuel type: electric, mast type: triplex, construction height: 2,060 mm, empty load weight: 3,500 kg, mileage: 4,587 km, EXPECTED This TRIPLEX forklift from the brand STILL is from 2020 and is in good condition. The forklift has a capacity of 1,600 kg and lifts up to a height of 4,620 mm. Clearance height is 2,060 mm; CONTAINER forklift! Equipped with SIDESHIFT and FREELIFT. 4,587 operating hours. The 2018 battery comes with an external charger and an automatic filling system. Schedule an appointment for a test drive; video to follow. FINANCIAL LEASE POSSIBLE, ASK FOR TERMS. Calculation is subject to credit approval and changes in interest rates and fees; final calculation via our external partner. Bodpfxjx Ag Rxs Ac Nedk