Used External Staircase for sale (4,835)

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 2,000 mm Projection: approx. 2,550 mm Total width: approx. 1,225 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,210 x 270 mm Number of steps: 10 steps Step height: approx. 175 mm Total length of the staircase: approx. 3,700 mm End stop: L-profile: 65 x 110 mm The end stop of the steel staircase is attached with 2 screws per side Drill hole diameter: approx. 16 mm Note: The steel staircases were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Ijdpfx Aaovnr Rrenjtr Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Steel staircase, exterior staircase, machine staircase, machine access, extension staircase -Steel staircase: sturdy design, 13 steps -Step height: approx. 228 mm -Step width: 860 mm Iodpfx Aex Hwybjanetr -Height: upper step approx. 2980 mm -Transport dimensions: 5040/980/H1015 mm -Weight: 343 kg

Condition: used, External circulating bath, circulating thermostat, temperature bath, water bath, circulating bath BROOKFIELD Type TC-102D Isdsxcbnxepfx Aanotr Serial No. D07200476 Temperature range: +5 °C to +150 °C Temperature stability: ±0.05 °C Temperature uniformity

Condition: used, Year of construction: 2000, honing diameter 80 / 152 mm stroke 210 mm throat 210 mm total power requirement 4,1 kVA weight of the machine ca. 1,1 t dimensions of the machine ca. 1,22 x 0,87 x 2,44 m Kennametal Extrude Hone Machine , Model 77C, Year 2000 Abrasive Flow Machining Itodsx Dxxdopfx Aaner for pressure flow lapping, or flow grinding of mech. parts. Polishing and deburring or surface modifications of complex components are carried out by means of a viscous abrasive (pressure flow lapping medium) and pressure.

Condition: good (used), Year of construction: 1990, Thread cutting machines with accessories Manufacturer SONE Type: 2000 . 230V . Iedsvk D Rpspfx Aanotr

Condition: used, Year of construction: 2002, grinding diameter: 515 mm, workpiece weight between centers: 500 g, WORKING RANGE CYLINDRICAL GRINDING .. swing diameter (max): 515 mm .. workpiece weight between centers (max): 500 kg .. workpiece weight flying (max): 120 kg WORKING RANGE EXTERNAL GRINDING .. grinding diameter (max): 515 mm .. grinding length: 1500 mm TABLE -CYLINDRICAL GRINDING- .. tilting range (B-direction) min: 8.3 ° .. rotating range B-axis up to: -4 ° .. longitudinal travel: 1680 mm WORKPIECE SPINDLESTOCK .. spindle revolutions (min): 14 /min .. spindle revolutions (max): 114 /min .. number of gears: 2 .. drive power: 1.5 kW .. tool fixture: MK 6 TAILSTOCK .. sleeve stroke: 40 mm .. taper: MK 5 SPINDLESTOCK GRINDING SPINDLE .. tilting range (B-direction) min: -10 ° .. rotating range B-axis up to: 10 ° .. drive power: 15 kW GRINDING TOOL .. type of grinding tool: wheel .. diameter (max): 630 mm .. borehole: diameter: 203.2 mm .. width: 125 mm DIMENSIONS / WEIGHTS .. space requirements -left/right-: 5150 mm .. space requirements -front/back-: 3700 mm .. total height: 2200 mm .. total weight approx.: 6500 kg ATTACHMENTS (GRINDING) .. self-centering chuck: 1 Isdpjx Azx Rjfx Aanjtr .. coolant unit: yes

Condition: good (used), The scope of delivery includes: 01x steel staircase Material color: yellow Floor height: approx. 1,9450 mm Projection: approx. 2,645 mm Total width: approx. 1,220 mm Chest profile: 180 x 8 mm Railing: both sides, galvanized Handrail and knee rail round tube Steps: tear plate, galvanized Step dimensions: 1,204 x 270 mm Number of steps: 10 steps Step height: approx. 190 mm Total length of the stairs: approx. 3,320 mm End stop: L-profile: 85 x 85 mm The end stop of the steel stairs is attached with 2 screws per side Drill hole diameter: approx. 16 mm Itjdpfx Aaevntmnsner Note: The steel stairs were partially assembled and partially unassembled. The pictures are intended to illustrate the material. The steel stairs are commissioned unassembled. This is a used item, it may have scratches, dents and signs of use. Your contact person in our company: Mr: Andre Evering Mr: Mario Klöver Mr: Falk Deutsch General information about the item: This item is only available for collection. Any additional transport or shipping of this item is associated with additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 Iedpfx Aajx Aq Egonstr max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *

Condition: used, Support grinder for lathe FEIN Type: MB 2101 Ident No.: 2287997 Grinding wheel diameter: max. 150 mm Grinding wheel width: max. 20 mm Mounting taper: Ø15.5 - Ø13 mm, length 21 mm Motor speed: 4400 rpm Ijdpfx Ajx A Imheanotr Motor power: 550 Watt Electrical connection: 380 Volt, 50 Hz - Grinding spindle drive via flat belt - 1 pc. grinding wheel mount Ø 32 mm - 1 pc. universal grinding wheel Ø 146 x 20 mm Support grinder weight: 19 kg In good condition

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, Cylindrical grinding machine – external / Manufacturer: WMW / Type: SA 6U x 3000 / YOM/Completely overhauled: 2013 (machine overhauler/carried out by SerWeMa/Germany) Range of parts: Straightening rollers, grinding spindles, general shaft machining. Special feature: Machining with up to 6 steady rests. The machine can be inspected under power by appointment. TECHNICAL DATA: Working range: - Centre height: 260 mm - Max. swing diameter: 515 mm - Max. grinding length: 3.000 mm - Max. grinding diameter: 515 mm - Max. workpiece weight: 500 kg Workpiece headstock: - Speed continuously variable: 12.5 - 355 rpm - Centring tip: Morse K5 Tailstock: - Max. quill stroke: 40 mm - Centring tip: Morse K5 Grinding headstock: - Grinding wheel: * Max. outer diameter: 630 mm * Width max.: 125 mm EQUIPMENT: - Extraction system - Documentation - CE marking No guarantee is given for the completeness and accuracy of the technical data and equipment. - Subject to prior sale - Iodpfx Asxymdaoanstr

Condition: new, Year of construction: 2026, Universal solid wood boring machine with stepless turnable drilling unit for universal applications like e.g. staircases, entry doors, windows, winter gardens as well as useable as horizontal mortiser. Itodpodx R E Tofx Aanjr Short introduction: • Universal application: staircases, frames, entry doors, windows, winter gardens as well as useable as horizontal mortiser, ... • Steppless turnable drilling unit: 65° - 0 - 65° • Drilling depth up to 200 mm (larger drilling depths optional) • Position height adjustment for 2 levels, pneumatically, 0 - 100 mm • Drilling in two levels through pneumatic raising and lowering of the drilling motor at a single workpiece clamping position • Pneumatic clamping cylinders • Multi spindle drillheads (option) • Pneumatic feed (option) • Mobil through castors (option) or with pallet trucks

Condition: ready for operation (used), Year of construction: 1982, functionality: fully functional, Set includes two thread cutting machines Ijdpjxyi E Tefx Aanjtr No.1 - REMS UNIMAT 75 (1985) equipped with a set of cutters and heads as per the attached PDF. Version with hydraulic vice. No.2 - REMS UNIMAT 75 (1992) backup machine, partially non-functional due to removed contactors, to be repaired/commissioned.

Condition: good (used), Scope of delivery includes: 01x Steel staircase Material color: yellow Floor height: approx. 1,890 mm Projection: approx. 2,650 mm Total width: approx. 1,208 mm Iodpfxovntb Ss Aanetr Stringer profile: 200 x 5 mm Railings: on both sides Handrail and knee rail: rectangular tubing Steps: smooth Step dimensions: 1,108 x 250 mm Number of steps: 11 steps Riser height: approx. 180 mm Overall stair length: approx. 3,320 mm End stop: L-profile: 100 x 55 mm Note: The steel staircases are partially assembled and partially unassembled. The images are for material illustration purposes only. The steel staircases are picked and shipped unassembled. This is a used item; scratches, dents, and signs of use may be present. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, this is subject to additional costs which can be requested from us depending on the delivery location and scope of delivery.

Condition: good (used), Year of construction: 2018, 2x Emergency Staircases, galvanized, approx. 10.70 m high with 3 landings for emergency exits at heights of 3.20 m, 6.40 m, and 9.60 m – used – : Price per unit ex-location: €12,500 (net), dismantled, packed, and loaded! Manufacturer: unknown Year of construction: 2018 Dimensions approx.: Footprint dimensions: 4.87 m x 2.68 m Height: approx. 10.70 m Suitable for 3 emergency exits Landing heights: 1: approx. 3.20 m 2: approx. 6.40 m 3: approx. 9.60 m With emergency door that can only be opened from inside and a three-sided fence at the bottom Each stair tower is founded on frontally arranged foundation beams with a cross-sectional width of 0.80 m and a height of 1.00 m. The embedding depth of the foundation beams is specified at 0.80 m. For anchoring, expansion bolts from HILTI are used. For stair treads and platform coverings, grating and steps from Meiser, type P-Grating 33x33, bearing bar 40/3 are used. Wind load zone: 2 Snow load zone: 2 Seismic zone: 2 Ijdpfx Ajxvh Hneanstr Condition: good Available: from approx. January 2026, possibly earlier Location: Euskirchen

Condition: used, FEIN Support Grinder Serial No.: G 95304 Model MB 406 Max. grinding wheel diameter: 100 mm Max. grinding wheel width: 20 mm Grinding wheel mounting: Ø 20 mm Motor speed: 6,800 rpm Motor power: 350 Watts Mains connection: 220 Volt, 50 Hz - Grinding spindle driven by flat belt - 1 universal grinding wheel Ø 98 x 20 mm included Weight: 11 kg Good condition Isdpfxox A Imbs Aanjtr

Condition: reconditioned (used), functionality: fully functional, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (min.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Retrofit Upgraded Cylindrical Grinding Machines , NORTHERN NORTHERN MACHINE TOOLS Online production equipment Itedpfjttfq Hjx Aaner Test run available Roundness within 0.001 Modified and upgraded cylindrical grinder, Bei Er Machine Tool Online production equipment Test girding available Roundness within 0.001 beier machine tool works co ltd

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other variants on request - 5 tiers - clamping depth 1050 mm - 1 pressure beam -1500 mm long, 60 mm high, per tier - 3 infinitely adjustable pendulum counter bearings, 400 mm long, per tier - 2 hold-downs with handwheel, per tier - 5 support arms, per shelf - all support arms with plastic supports (glue-repellent) - maximum pressing length 1600 mm - powder coated (glue repellent): grey white RAL 9002, moving parts light blue RAL 5012 Itodpjgu D Rmsfx Aansr - the presses are delivered ready for operation with pressure regulating valve + air standard connection.

Condition: like new (used), functionality: fully functional, tool type: VDI 40, overall weight: 10 kg, At a glance  Extremely compact construction for critical length threads  Thanks to disengaging clutch thread length is precisely controlled  One single head for internal and external threads  Integrated coolant supply (with coolant feed through centre on request)  Available in  ANGST Flex or ESX (ER) Collets  Sizes 1, 2, 3, 4 and 6 Itjdpfx Aasxltzvjnjr  All usual shanks e.g. cylindrical, cylindrical with flat (Weldon), DIN 69880 / VDI 3425, SK DIN 69871, BT (Japan Standard MAS 403), ISO Caterpillar and Morse taper  Heavy-duty and durable Swiss quality products PAFIX Tapping Head for CNC machines  The PAFIX CNC head has been designed especially for all machines with programmable forward and return feeds to the toolholder (turret, spindle, etc.). It is of extremely compact length and is fitted with a positive disengaging clutch which can be set to 3 different pull-out lengths if required, for example with head size 25-2…, 1,5/3/5 mm.  The head can be set to two different programmed tapping cycles as follows. Both cycles ensure a certain amount of pitch compensation (float). In order to make sure of faultless thread cutting with precise starting point and depth or length of the thread, no spring take-up thread lead or friction clutch against overload has been provided. The PAFIX CNC is designed to permit a quick change over from tapping head to die head. Simply unscrew the collet nut and replace with the die housing.

Year of construction: 2025, condition: new, functionality: fully functional, This Positioner includes 7th Axis Motor and Drive for KUKA KRC2, KRC2 ed05 systems. As PLC Merkezi Bulgaria, we design and manufacture heavy-duty robotic positioners (7th axis systems) fully compatible with KUKA, ABB robots. Our positioners are built using original gearboxes, servo motors and drives to ensure seamless integration with your robotic system. Product Use / Applications: Welding and cutting projects (rotating workpiece for optimal angles) Itodpfsw S Uahsx Aanjr Stone and marble processing (rotary support for heavy blocks) Assembly and machining operations (multi-side accessibility) Large part handling and positioning Any application requiring increased robot reach and flexibility Integration: This 7th axis can be integrated with your existing robot controller as an external axis, synchronized with the robot’s motion for precise and efficient operation.

Condition: used, This listing is for a CAB ER6 External Rewinder. The unit is in full working condition and is ready for immediate release. The CAB ER6/300 External Rewinder is a versatile and efficient label rewinding solution designed to work seamlessly with the Squix 6.3 label printer and other 6-inch label printers. Featuring a built-in power supply, it operates independently without requiring power from the printer, making it a universal and flexible option for industrial labeling applications. Key Features: 🔹 Compatible with Squix 6.3 and Other 6-Inch Label Printers – Ensures seamless integration and efficient operation. 🔹 Wide Material Support – Handles labels up to 180mm wide, accommodating various printing needs. 🔹 Large Roll Capacity – Supports label rolls with a maximum outer diameter (OD) of 300mm. 🔹 Dual Winding Modes – Allows labels to be wound inside or outside for greater flexibility. 🔹 Independent Operation – Built-in power supply eliminates dependency on the label printer. 🔹 Adjustable Core Size – Compatible with 44mm and 76mm cores for diverse applications. 🔹 High-Speed Rewinding – Maximum speed of 300 mm/s ensures fast and efficient label handling. Specifications: Compatible Printers: Squix 6.3 and other 6-inch label printers Material Width: Up to 180 mm Maximum Roll Diameter: 300 mm Winding Options: Inside or Outside Core Sizes: 44mm or 76mm Rewind Speed: Up to 300 mm/s Power Supply: Built-in (independent from printer) Dimensions: 350 x 340 x 390 mm Weight: 6.3 kg Benefits: Universal Compatibility – Works with various 6-inch label printers, ensuring broad usability. Ijdpfx Aaexxya Senjtr Enhanced Efficiency – High-speed rewinding improves workflow and productivity. Independent Power Supply – Eliminates extra load on the printer, reducing wear and tear. Flexible Winding Options – Supports both inside and outside winding, offering customized label handling. Large Roll Capacity – Handles big label rolls, minimizing downtime due to frequent roll changes. Applications: 🔹 Industrial Labeling – Ensures efficient label rewinding for high-volume printing. 🔹 Warehouse & Logistics – Helps streamline labeling processes for inventory tracking. 🔹 Manufacturing – Optimizes label handling for product identification and compliance. 🔹 Retail & Distribution – Improves efficiency in product labeling and packaging.

Year of construction: 1996, condition: ready for operation (used), Center height: 150mm, max. grinding diameter: 300mm, distance between centers: 620mm, max. workpiece weight: 120kg, grinding head spindle swivel range: +45°/-15°, table adjustment: +/-8.5°, travel X/Z: 160mm/756mm, grinding wheel dimensions X/Y/Z: 400mm/63mm/127mm, grinding wheel speed: 45m/s, workpiece spindle speed: 700rpm. Machine dimensions X/Y/Z: approx. 3000mm/1850mm/1850mm, weight: approx. 3000kg. Including LTA extraction system and SBS wheel balancing device. The workpiece drive is disassembled and its completeness is unknown. Documentation available. An on-site inspection is possible. Iodpfxexvdd Ao Aanstr

Condition: excellent (used), Center height 300 mm Distance between centers 3500 mm Grinding wheel 760 x 305 x 100 mm With DRO Iedpstpgnhjfx Aanjtr With measuring control MARPOSS Misc.accessories MARCELS MASCHINEN AG

Condition: excellent (used), External Quick-Receiver Stock Number (28620) Iedpfx Aswf Hhfeanotr Manufacturer: Kroeplin Odistest OD60100BJ AF01E032 Measuring range 0-100 mm Probe length 530 mm Packaged in a wooden case

Condition: used, This listing is for the Mitutoyo IP65 External Micrometer The unit is in full working condition and is ready for immediate release Imperial or Metric reading Large LCD display Protected to IP65 for use where coolant may be present Original setting and Auto power off Accuracy +/1μm, Flatness 0.3μm, Parallelism 1μm Supplied with Ijdsxv A Ruspfx Aanotr Batteries, instruction manual and storage case. Mitutoyo Micrometer The Mitutoyo external micrometre has a measurement range of 0mm to 25mm with an accuracy ±1μm. This is high tech, robust, battery-operated device. The Digimatic micrometre offers outstanding accuracy with and without data output. It consists of an oil-resistant material used for all plastic parts. The excellent resistance against water and dust enables this micrometre to be used in machining situations that include splashing coolant fluid.

Condition: excellent (used), External threaded steel holder (28399) Make Komet Itodpfx Aasmk E U Aonjr type FG II unused from magazine shank cross section 29 x 12 mm