Used Extractor Hood for sale (1,599)

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Bsdpfx Aozf Hn Asndodi Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: used, Year of construction: 2021, functionality: fully functional, intake vacuum (max.): 32 mbar, suction capacity: 3,500 m³/h, actuation type: electric, Dust extraction unit, dust collector, wet separator for aluminum and explosive dusts, manufactured by the renowned brand TEKA. Model: WNA AL 3500 Designed for cleaning dust with special properties, particularly explosive dusts. Bodpszq A Ezofx Andjdi High-performance wet dust collector, operates on the principle of centrifugal separation. The advantage of this unit is its simple and reliable operating principle. The unit does not have pumps or nozzles that could interfere with its operation. Air is cleaned by swirling the dust with water. Dust particles in the air stream are captured and bound by water molecules. The separated dust settles as sludge in the bottom tank and can be removed from there. The fan is designed for continuous operation and is standard equipment on the unit. Unit parameters: Capacity - 3500 m3/h Vacuum - 3200 Pa Fan with a power of 4 kW Year of manufacture: 2021

Condition: good (used), Year of construction: 2011, functionality: fully functional, Technical details Bdjdpo Ahn Hyjfx Andoi x-travel 500 mm y-travel 450 mm z-travel 400 mm Control Heidenhain iTNC 530 tool taper HSK 63 total power requirement 34 kVA weight of the machine ca. 4810 kg Accessories oil-mist-extractor Additional information Operating hours: 89.800 Spindle hours: 43.800 Machine with new milling spindle, replaced 2026. CNC control: Heidenhain iTNC 530 Equipment and accessories: Pallet changer (Automation PH 150/8) 60-position tool changer Electronic handwheel HR 410 Touch probe (TS) Chip conveyor Internal coolant supply system Oil-mist-extractor Machine without tool taper and clamping devices.

Condition: new, Year of construction: 2025, warranty duration: 12 months, type of input current: three-phase, input frequency: 400 Hz, overall weight: 90 kg, input voltage: 380 V, VIBER-SYSTEM OS3008 – Industrial fume extractor for welding fumes – NEW Professional mobile extractor with a capacity of 3,000 m³/h, designed for localized extraction of fumes and dust generated during welding, cutting, and grinding operations. Ideal for mechanical workshops, metalworking shops, industries, and welding stations. TECHNICAL SPECIFICATIONS Model: VIBER-SYSTEM OS3008 Airflow: 3,000 m³/h Motor power: 3 kW Pressure: 2,000 Pa Power supply: 380 V Declared filtration efficiency: up to 99.9% Filter: PTFE membrane Filtration area: 30 m² Extraction arm: rotatable 360° Bdsdpo Ahh Dcefx Andoi Arm length: 2–3 meters Arm diameter: 160 mm Noise level: less than 65 dB Weight: 90 kg Filter cleaning: manual MAIN ADVANTAGES Fume extraction directly at the source High-efficiency filtration system Mobile structure on wheels, easily transportable Adjustable arm to adapt to different work stations Practical solution for workshops and industrial environments CONDITION: New

Year of construction: 2025, condition: like new (used), For sale is a mobile dust extractor from the manufacturer Blotenberg, model FILTERBLOC MOBIL-3000, with 0 operating hours. The unit has sustained minor damage, presumably from a collision, but this is not expected to affect its functionality. Manufacturer: Blotenberg Model: FILTERBLOC MOBIL-3000 Date of manufacture: 04/2025 Article number: OEM-7094 Power: 3.0 kW Voltage: 400 V Phases: 3P+PE Frequency: 50 Hz Protection class: IP55 Nominal air volume: 3,200 m³/h Max. negative pressure: 2,500 Pa Max. raw air connection: Ø 224 mm Bdedpsz R Dhpefx Andoi Filter area: 20 m² Weight: 180 kg Operating hours: 0 h Design: Mobile, can be moved Application: Extraction of dry, free-flowing dust and fumes Condition: Unused, with minor collision damage Documentation: Operating and maintenance manual available

Year of construction: 2007, condition: good (used), Laboratory fume hood, fume hood, extraction cabinet, extraction fume hoods, fume hood system for pharmacies, chemical and medical applications, extraction system, filter system -Extraction: aggressive, chemical gases Bdodpfeb Uhnqox Andsi -Internal dimensions: 540/850/H900 mm -Stainless steel version -Glass door front -With Camfit filter cartridge -Connection: 0.085 kW -Suction type: EB 225 -with extractor hood -Dimensions: 675/900/H1200 mm -Weight: 100 kg

Condition: used, Year of construction: 2023, machine/vehicle number: 200617, functionality: fully functional, Dear customers, Bsdpfx Ansy Hz Upsdsdi To ensure fast and reliable processing of your request, we kindly ask you to contact us preferably by email. This will allow us to assign your request directly to the appropriate contact person, collect all information and documents completely, and process your request as quickly as possible. We look forward to hearing from you and are happy to assist you! Technical data can be found on the nameplate. Available: immediately, the customer will receive a larger unit. Serial number: 200617 Riedex DM-200/M-B Dust collector Left-hand version, motorized cleaning, with chip container.

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 1,100 kg, input voltage: 400 V, total width: 1,650 mm, total length: 2,000 mm, total height: 4,000 mm, filter area: 140 m², suction capacity: 3,800 m³/h, negative pressure: 3,500 Pa, Dust extraction unit, fume extraction for welding, self-cleaning filter, suitable for plasma cutting, laser cutting, sandblasting, shot blasting, and all types of dry dust. Bodpfxjzlzv Ij Andsdi The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Motor power: 7.5 kW Capacity: 3800 m3/h Inlet diameter: 280 mm Filter cartridges: 9 pcs. Filtration area: 140 m2 Fire damper Noise silencer Dimensions: Height: 4.00 m Width: 1.65 m Depth: 2.00 m Base: 1.33 m x 1.84 m Stock number: 1148

Condition: used, mileage: 1,18,000 km, power: 70 kW (95.17 HP), first registration: 03/2011, fuel type: diesel, overall weight: 3,499 kg, color: grey, gearing type: automatic, emission class: euro5, number of seats: 2, Year of construction: 2011, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Food truck / sales vehicle Mercedes Benz Sprinter Net selling price: 39,000.- € Newly built, has not yet been used as a food truck. First registration: 03/2011 Mileage: 118,000 Emission class EURO 5 Transmission: Automatic Unladen weight: 2,940 kg Interior fittings: - Furniture made entirely of stainless steel, custom-made for this vehicle, - Extractor hood incl. motor with a capacity of 1880 m3/hour, - Distribution box incl. RCD circuit breaker, - Power connection 1x16A 230V, optionally switchable to 3x32A 400V - LED lighting, - Refrigerator 600l, GN compatible, 1 unit - Freezer 400l, 1 unit - Saladette refrigerated counter 240l, inlet for 4 GN 1/3 containers, 1 unit - Table for cooking equipment, individually configurable, 2x800mm, 1x400mm, removable table tops - Hygiene area with boiler and pump, 2x19l canisters - Service: Brake discs and pads renewed front and rear, water pump, oil change NEW. The vehicle was converted by a reputable workshop that has specialized in converting food trucks for more than 10 years. Come and see the quality of the conversion for yourself and visit us in person during our opening hours for a non-binding consultation! Cargo area length: 4.40m Cargo area height: 2.00m Cargo area width: 2.00m Special equipment: - Hill-start assist, - Steering wheel (steering column mechanically adjustable), - Mud flaps front, - Stabilizer bar rear, - Stabilizer bar front reinforced, Further equipment: - Adaptive brake light, - Airbag driver side, - Display for windshield washer fluid level - Exterior mirrors electrically adjustable and heated - both, exterior mirrors with integrated turn signal - Brake assist - Braking system with ABS+ASR - Roof lining in the cab - Glove compartment lockable - Body/structure: box van - Fuel tank: main tank 75 liters, - Headlamp range adjustment, - Engine 2.2 Ltr. - 70 kW CDI, - Wheelbase 4325 mm, - Smoker's package, - Tire repair kit with compressor - Low emission according to exhaust standard Euro 5 - Seat cover / upholstery: fabric Lima, - Service interval indicator Assyst, - Heat-insulating glazing, - Permissible total weight 3.50 t Bdedpfez N Rp Rox Andsi If you have any questions: Christian Hirsch Please try again, as we are often in a customer meeting. You can find more food trucks at: ----More offers at Please no emails / no emails We can only process them sporadically due to time constraints, thank you for your understanding!---- If you have any questions: Christian Hirsch: Equipment was determined with the help of a VIN query, technical errors may occur. Information provided on the Internet are non-binding descriptions. They do not constitute guaranteed characteristics. The seller is not liable for typing and data transmission errors / changes / input errors. Errors / prior sale reserved.

Condition: used, Year of construction: 2020, Extraction nozzle diameter: 160 mm Nominal volumetric flow: 1950 m³/h Volumetric flow monitoring: differential pressure indicator Vacuum: 3200 Pa Filter area: Filter cleaning: motorized Motor power: 2.2 kW Machine length: Machine width: Bdedez A Eacspfx Andoi Machine height: Weight: 320 kg

Condition: used, GTI Oil Mist Collector GT 10L, 1000 m³/h, Used machine Manufacturer: Glob Tec Industriemaschinen GmbH (GTI) Type / Model: GT 10L Year of manufacture: 2020 Serial Number: 20200046 Condition: Used, good condition Dimensions and capacity: * Overall dimensions: 1300 x 930 x 830 mm * Flow rate: 1000 m³/h Technical and operating parameters: Bodpfj Adrtxsx Andodi * Connected load: 0.5 kW * Voltage: 200 - 277 V * Frequency: 50 / 60 Hz * Max. operating current: 2.5 A * Max. back-up fuse: 16 A

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, overall weight: 135 kg, input voltage: 400 V, filter area: 10 m², suction capacity: 1,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, input current: 3 A, Equipment: type plate available, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. Model: Filter-Master XL Year of manufacture: 11/2013 Fan power: 1.5 kW Capacity: 1000 m3/h Vacuum: 3000 Pa Filter cartridge Filtration area: 10 m2 Bjdpfx Anezu Rm Iedodi Extraction arm length: 3.00 m Stock number: 1163

Condition: like new (used), Year of construction: 2019, operating hours: 137 h, T45 thicknesser from Martin with Tersa cutterhead Planing width approx. 630 mm Planing height adjustable electrically from 2.8 to 300 mm, with digital display for reading in 1/10 mm accuracy with positioning control. The control system also offers the possibility of incremental adjustment, i.e., you can, for example, set a value of 1 mm and then repeatedly press the start button to change the planing height by 1 mm each time, without having to set a new absolute height each time. Furthermore, 99 fixed values can be saved as a program. Drive motor 5.5 kW with automatic motor brake 4-knife Tersa cutterhead with new knives Bdodpfx Ansz Icvljdei Feed rate 6 + 12 m/min Rubber-coated infeed roller Rubber-coated outfeed roller Planed machine table guided on four leadscrews and guides for optimal stability Low-noise design with soundproof hood Dust extraction port 160 mm Emergency stop at the front and rear New Tersa knives Operating manual CE marking Original paint, not repainted Carpet in original condition No scratches on the table!! Only 137 operating hours, i.e., only 25 minutes per week!!! Dimensions approx. 1200 x 1300 x 1250 mm (L x W x H). Weight approx. 1200 kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration, see "other offers from this seller".

Condition: excellent (used), Year of construction: 2013, Mode of operation: continuous operation with intermittent pauses Type of current: three-phase AC Frequency [Hz]: 50 Power consumption [kW]: 4 Supply voltage [V]: 3 × 400 V Number of filter bags / filter cartridges: 18 / Plitex Filter material: polyester felt 973010, dust class M, Bdedpfoxup Ausx Andei d = 160 × 1503 mm Filter area [m²]: 73.8 (4.1 m² per filter cartridge) Weight [kg]: approx. 700 Filter cleaning: compressed-air pulse cleaning Compressed air connection: standard NW7 quick coupling  – compressed air must be dry and oil-free  – Maximum pressure: 8 bar, Nominal pressure: 6 bar Compressed air consumption: approx. 360 normal litres per cleaning cycle Ambient temperature [°C]: 5–40 Maximum sound pressure level [dB(A)]: less than 70 Conveyed medium: air with solid particles Minimum operating temperature [°C]: 5 Residual dust content [mg/m³]: < 0.2 Maximum operating temperature [°C]: 45 Type of solids: salt-containing dust up to 2 mm particle size Maximum Kst value [bar·m/s]: 200

Condition: used, Year of construction: 2003, functionality: fully functional, type of input current: three-phase, overall weight: 620 kg, filter area: 60 m², suction capacity: 5,000 m³/h, negative pressure: 2,500 Pa, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based system for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Kemper System 8000 The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Bodpfezil Ivox Andedi The fan is located on the clean air side, minimizing the risk of explosion. Year of manufacture: 2003 Fans with a power of 5.5 kW. Flow rate: 5000 m3/h Vacuum: 2500 Pa Filtration area: 60 m2 Stock number: 1147

Year of construction: 2019, condition: used, functionality: fully functional, This Rational Ultra Vent hood for Rational combination steam ovens, including the connection kit, is suitable for the CM, CMP, SCC 61/101 electric combination steam ovens from the model year 2011 up to the i Combi series. (This hood is no longer suitable for the current i Combi series). The hood has been inspected in our in-house workshop and is fully functional. You will receive an invoice with VAT shown. Are you looking for a specific Rational appliance type? Ask us; we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on electrical parts, limited to the replacement of defective parts, without installation and removal costs Professional overhaul/inspection & expert cleaning Inspected & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating manuals, connection diagrams & spare parts Inspection according to DGUV V3 This Ultra Vent hood features patented condensation technology, which binds and removes vapors and fumes. Elaborate measures for exhaust system installation are a thing of the past. An external connection is no longer necessary. Installation is simple and can even be done retroactively. Technical data: W x D x H: approx. 854 x 1226 x 470 mm Power connection: V: 230 / Hz: 50-60 Weight: approx. 55 kg Serial number: ET1UE19095037107 Year of manufacture: 2019 Type: 60.72.320 Condition: used, inspected, fully functional Bdedpfx Anez Ahbrsdsi Shipping: Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to changes and errors Do you have any questions, would you like advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday from 9:00 a.m. to 1:00 p.m. and from 2:00 p.m. to 5:00 p.m. The sale is exclusively subject to our general terms and conditions (GTC).

Year of construction: 2011, condition: used, MSK Covertech Tension Tech Stretch Hood Wrapping Machine. S/No. 371-3 (2011) Bdedpfxoz I Suwj Andei Location: These lots are located in Susegana, Treviso, Italy. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser.

Condition: excellent (used), Paint mist extraction unit, ALKO spray wall Increased flexibility thanks to extraction technology with a frontal plate system Motor data: 0.75 / 2.1 kW ex/ 400 V / 50 Hz Speed: 950 / 1,420 rpm Airflow: 3,000 / 6,800 m3/h Dimensions (W/H/D): 1,912 x 1,405 x 943 mm Bodoy Dpfwepfx Andjdi with side panels extended: 2,971 x 1,405 x 1,215 mm Filter surface: 2 m2 Weight: 248 kg Condition: very good

Condition: like new (used), Year of construction: 2011, functionality: fully functional, volume flow: 2,30,000 m³/h, nominal power (apparent): 22 kVA, For sale: filter for removing haze from paint. Fine dust filter. Bdedpfx Ajzhbqqsndsi

Condition: used, Year of construction: 2001, functionality: fully functional, filter area: 43 m², volume flow: 7,650 m³/h, negative pressure: 2,200 Pa, rotational speed (min.): 2,800 rpm, We are selling our bag filter, type Nestro NAsf5/3. The unit is available for dismantling and collection at our premises. Due to a new acquisition with integrated heat recovery, this unit is now surplus to our requirements. Bdedpfx Anozt Ruvedsi

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, overall weight: 200 kg, input voltage: 400 V, filter area: 15 m², suction capacity: 1,100 m³/h, negative pressure: 3,200 Pa, input frequency: 50 Hz, hose length: 3,000 mm, Welding fume extractor, dust collector, self-cleaning filter, pneumatic, vacuum KEMPER. For welding, grinding, and all types of dry dust. Self-cleaning welding fume filter with non-polluting dust collection. The mobile cartridge filter KEMPER MaxiFil Clean is designed for continuous operation to filter welding fumes and dust with high concentrations. Suitable for use in welding carbon steels, low-alloy steels, high-alloy steels, and aluminum using any welding method. Economical in operation due to the long service life of the filter cartridge. Parameters: Capacity - 1100 m3/h Maximum vacuum - 3200 Pa Three-phase fan with a power of 1.5 kW Filtration area - 15 m2 Year of manufacture - 2015 Patron filter cartridge with PTFE membrane Filtration efficiency - > 99.97% Bjdozdqv Uepfx Andjdi Built-in delay timer in start-stop mode. When connected to a start-stop sensor (optional), the delay time for fume extraction after the welding process is completed can be set to a value of 5-60 seconds. Stock number - 1145

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: three-phase, overall weight: 1,600 kg, input voltage: 400 V, total width: 1,900 mm, total length: 3,100 mm, total height: 4,350 mm, filter area: 288 m², suction capacity: 20,000 m³/h, Dust extraction unit, fume extraction unit, self-cleaning cartridge filter, pneumatic, vacuum-based for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned by pulses of compressed air during operation, resulting in high device efficiency. The fan (built-in) is located on the clean air side, which minimizes the risk of explosion. Parameters: Capacity up to 20,000 m3/h Filtration area 288 m2 Cartridge filter elements - 16 pcs. Bjdpfxszd Twbs Andodi Motor power 15 kW Inlet diameter - 500 mm Dimensions: Height - 4.35 m Width - 3.10 m Depth - 1.90 m Weight approximately 1600 kg Stock number: 1146

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: EF2UA23105068402, This is an UltraVent condensation hood from the premium manufacturer Rational, type UV 202E. This hood can be used with iCombi appliance sizes 20-2/1 in an electric version. Thanks to the condensation technology, the UltraVent binds escaping vapors. An external connection or the extension of an existing exhaust system is not required for this recirculating hood. The hood has been inspected in our in-house workshop and is fully functional. The stated price is the gross price, including 19% VAT. The recommended retail price for this hood is €7,233.00 net. Service: We will gladly connect you with a certified Rational customer service representative throughout Germany. Are you looking for a specific Rational appliance type? Ask us; we have access to an extensive range of used and new products. We will gladly advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic, and Pro. Our appliance service for you: 6-month warranty on all electrical parts High-quality branded appliances at fair prices Professional overhaul/inspection & expert cleaning Inspected & fully functional - or your money back Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Inspection according to DGUV V3 Technical data: External dimensions WxDxH: 1084x1134x337mm Electrical connection: 1NAC 230V 50Hz 0.16kW Serial number: EF2UA23105068402 Year of manufacture: 2023 Maximum extraction rate: 705 m3/h Operating noise: Average: 50-65 dB(A) Condition: Used, inspected, and fully functional. SHIPPING: Delivery or self-collection by arrangement Bjdpfx Aozu R Ufjndjdi Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Do you have any questions, would you like to receive advice, or would you like to see something on-site? You can reach us by telephone during our opening hours: Monday to Friday, 09:00 - 13:00 and 14:00 - 17:00. The sale is exclusively subject to our general terms and conditions (GTC), which can be found at the link "Legal Information".

Condition: new, The powerful, mobile welding fume extractors AL-KO CLEAN UNIT F are the ideal solution for extracting welding fumes during manual welding, at automated welding stations, or with welding robots. Function: The welding fumes generated at the welding site are captured via extraction arms and hoods, among other means, and conveyed through a duct to the inlet of the AL-KO CLEAN UNIT F. In a large pre-separation chamber, coarse particles are first separated out. The subsequently arranged filter cartridges of dust class “M” filter out the remaining fine dust particles. During extraction operation, the differential pressure-controlled filter cleaning system removes adhering particles from the filter cartridges. Venturi nozzles on the filter cartridges maximize the cleaning efficiency, ensuring consistently high suction power and a long filter service life. A volumetric flow monitor continuously controls the required suction capacity and issues a warning if the nominal value is undercut. The collected dust is gathered in an easily mobile container. The cleaned air is recirculated into the room via the top of the unit. Bjdpfswwkvqjx Andodi Applications: - For all welding applications with unalloyed or low-alloyed steel - Usable as extraction at individual welding stations and at duct systems with several extraction points - Extraction at fixed-position hoods and welding tables Advantages: - Consistently high suction power thanks to an efficient fan and long-life cleanable filters - Extremely quiet due to high-performance sound insulation - Suitable for individual welding stations and for connection to duct systems - IE3 motors for high energy efficiency - Wide performance range - Optional accessories for various welding applications

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Bodoy T Iyrspfx Andedi Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120