Used Oil Extractor for sale (12,759)

Condition: used, Year of construction: 2018, operating hours: 6,700 h, type of input current: three-phase, suction capacity: 5,000 m³/h, negative pressure: 3,100 Pa, Oil mist extraction for workshops – Plug & Play filtration tower for extracting oil mist during the emission of cooling lubricants. IVAT Ölnebel-T5K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapors. Industrial hall ventilation and filtration: numerous manufacturing processes, especially in metalworking, generate substantial oil mist. Very often, extractor systems for coolant recovery integrated into machines are either insufficiently effective or simply not installed. Machine retooling, frequent opening of enclosures, or lack of guarding around machining heads leads to the release of oil mist into working areas, exposing personnel to harmful vapors and mists. Installing a ventilation tower significantly improves air quality at workstations and is the ideal filtration supplement for workshop halls where comprehensive oil mist separation via coolant recovery units is difficult or impossible to achieve. Features automatic air and temperature monitoring in the room. An innovative PLC control system compares input data, detects threshold exceedances in the working area and heat buildup directly under the ceiling, and automatically regulates air quality and temperature. Performance: up to 5,000 m³/h Negative pressure: up to 3,100 Pa Filtration surface: 9 m² Prodpfxsxxh Tas Ab Isd Fan power: 3 kW Year of manufacture: 2018 Operating hours: 6,700 Several units of this device available.

Condition: used, Oil mist extractor, emulsion mist separator, GTI GT40L, Used machine Predpfextwncex Ab Ied Manufacturer: GTI Glob Tec Model: GT 40L Overall dimensions: Width: 857 mm Depth: 1319 mm Height: 2287 mm Weight: 400 kg Year of manufacture: 2020 Airflow rate: 4000 m³/h Electrical power: 400V; 3.7 kW Total filter surface area: 38.9 / 108 m² Number of filter cartridges: 4 + 2 HEPA Filter types: Stufe1 L1020/300/1 – 4 pcs HEPA LH 1020/1 – 2 pcs

Year of construction: 2015, operating hours: 13,660 h, condition: used, filter area: 18 m², negative pressure: 2,000 Pa, suction capacity: 13,000 m³/h, Oil mist extraction unit for workshop halls – Plug & Play filtration tower designed for extraction of coolant and lubricant emissions in industrial halls. IVAT Ölnebel-T13K filtration and ventilation tower. Ideal for aerosols, oil mist, emulsion mist, and vapor extraction. Industrial hall filtration ventilation – suitable for numerous technological processes in manufacturing plants, particularly in metalworking operations. Very often, extraction systems with coolant recovery installed directly on machines are insufficiently effective or simply not present. Machine retooling, frequent opening of machine enclosures, or lack of enclosure at machining heads causes oil mist to escape from machine areas, exposing workspaces and personnel to harmful mist and vapors. Installing a filtration tower significantly improves air quality at workstations and should be considered an ideal filtration and ventilation supplement for halls where fully isolating oil mist using coolant recovery devices is either impossible or very difficult to achieve. Prjdpfxjxnlwzj Ab Iod Equipped with automatic air and temperature control for the workspace. An innovative PLC control system monitors data and detects threshold exceedances at the workplace, ceiling heat-up, and automatically regulates temperature and air quality. Performance: up to 13,000 m³/h Vacuum: 2000 Pa Filtration area: 18 m² Fan power: 7.5 kW Year of manufacture: 12/2015 Operating hours: 13,660 Stock number: 1054

Condition: used, volume flow: 7,500 m³/h, Oil mist extractor for CNC machines, Donaldson Torit brand filter separator. The unit is designed for filtration of oil mist (emulsions as well as pure oil), Podpsxd Ry Hsfx Ab Ierd vapors and fumes generated by various metal cutting processes. Filtration efficiency reaches 99.97% Model: DMC-D2 Fan power: 7.5 kW Capacity: 7,500 m3/h Filtration area: 40.8 m2 Filter cartridges in very good condition. Stock no.: 1043

Condition: used, Year of construction: 2015, functionality: fully functional, overall weight: 1,100 kg, filter area: 128 m², suction capacity: 15,000 m³/h, negative pressure: 2,800 Pa, Plug & Play filter tower for exhaust in halls during emission of cooling and lubricating agents. ESTA Filtower L-160 filter ventilation tower. Ideal for aerosols, oil mist, emulsion mist and fumes. Filter ventilation of industrial halls - numerous technological processes in production plants, mainly carried out in metalworking. Often, exhaust systems that recover coolant, installed on machines are not effective enough or are simply not installed on them. Retooling of machine tools, frequent opening of their housing or lack of construction at the machining heads causes the oil mist to escape outside the area of the machines, into the workplaces of people exposed to inhalation of harmful mists and vapors. Installing a ventilation tower significantly improves the air quality in workplaces and should be treated as an ideal filter ventilation supplement for halls, where the complete separation of oil mist by coolant recovery devices is impossible or definitely difficult to achieve. Pjdpfx Aov I Ub Tob Iord Applications: - Support for local exhausts -Support for direct exhaust during CNC cutting -Production halls – CNC machines -for improving air quality in production halls year of production - 2015 Efficiency - 15000 m3/h Negative pressure up to 2800 Pa Filtration area - 128 m2 2 x 4 kW fan (possibility of working on 1 fan) Device in very good condition. Stock no.: 0971

Condition: new, functionality: fully functional, protection type (IP code): IP55, 🔹 General Information Product Type: High Flow Oil Cooler Application: Designed for cooling oil in large machinery Cooling Units: 3 identical condenser units (each can operate separately) Quantity: 2 pieces available Price: Per piece 🔹 Technical Specifications Motor: Voltage: 380-420V / 660-720V Speed: 1460 rpm Power: 11 kW Quantity: 2 pieces Cooling System: Number of Condenser Units: 3 (independent operation) Cooling Type: Oil cooling Pjdpev Edh Refx Ab Ijrd 🔹 Key Features ✅ High Cooling Capacity – Built for large industrial machines ✅ Independent Operation – Each condenser unit can function separately ✅ Versatile Applications – Can be adapted for different uses ✅ Durable & Heavy-Duty Design – Engineered for continuous operation ✅ Multiple Voltage Compatibility – Works with both 380-420V and 660-720V power sources 🔹 Typical Applications Heavy-Duty Industrial Machines – Used in hydraulic systems, power plants, and factories Construction Equipment – Excavators, loaders, and heavy-duty machinery Manufacturing Facilities – Cooling oil in presses, CNC machines, and automated systems Marine & Offshore Equipment – Cooling solutions for ship engines and offshore platforms

Condition: ready for operation (used), functionality: fully functional, operating pressure: 12 bar, pressure: 28 bar, oil tank capacity: 200 l, Parameters Manufacturer: Howden Power A/S (Denmark) / PMC Technology A/S Model: BTVAB-7 (Hydraulic Oil System for BTV-7) Year of manufacture: 2007 Pumps: 2 × 5.5 kW motors, 1410 rpm Flow rate: 12 cm³/rev Operating pressure: 12 bar Maximum pressure: 28 bar Oil tank capacity: approx. 150–200 L Filtration: Magnehelic pressure differential gauges, multi-stage filtration Piping: Stainless-steel hydraulic lines Configuration: Dual-pump system (duty + standby) Condition: Structurally sound, fully complete Origin: Elektrėnai Power Plant (Lithuania) Application: Lubrication and hydraulic actuation for BTV-7 bearings and mechanisms Fully equipped Howden / PMC Technology hydraulic oil system, designed for lubrication and hydraulic control of heavy-duty industrial bearings and damper mechanisms. The system includes two hydraulic pump motors, complete stainless-steel piping, pressure control blocks, flow meters, and Magnehelic filtration indicators. Originally part of the BTV-7 booster draft fan set at Elektrėnai Power Plant and used only intermittently. Mechanically intact, ready for recommissioning after basic cleaning and servicing. Suitable industries: Pjdpsxy Hk Tjfx Ab Ierd Power plants Biomass & waste-to-energy plants Petrochemical & refinery applications Steel & heavy industrial facilities Industrial ventilation & draft systems Any operation requiring high-reliability hydraulic lubrication units

Condition: new, functionality: fully functional, Year of construction: 2023, overall weight: 500 kg, total height: 580 mm, total length: 600 mm, total width: 500 mm, load capacity: 35,000 kg, winch Producing company Dinamic oil Type SW35/2 JMG Year built 2023 Height (mm) 580 Length (mm) 600 Lifting weight (kg) 35,000 Predsxp Scmopfx Ab Isd Weight (kg) 500 Width (mm) 500

Condition: excellent (used), functionality: fully functional, Year of construction: 2016, operating hours: 950 h, load capacity: 300 kg, mast type: free lift with telescopic boom, overall weight: 7,490 kg, fuel type: diesel, color: white, Equipment: ABS, The truck-mounted work platform 20m 3.5 t can be operated with a standard category B driving licence and is ideal for all tasks at heights. Delivery of the work platform is possible but will be invoiced separately. Prsdexvmn Repfx Ab Isd

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, operating hours: 7,000 h, mileage: 60,000 km, load capacity: 200 kg, lifting height: 21,000 mm, fuel type: diesel, TRUCK MOUNTED PLATFORM Oil & Steel Snake 21.12 Year 2014 Working height 21 m Horizontal outreach 12 m Basket capacity 200 kg Working hours 7.000 km 60.000 All hydraulic controls Prjdpfxextmq Hs Ab Ijd Good conditions All regular documents

Condition: used, Year of construction: 2005, Oil en steehl octopussy 14.65 Year of construction 2005 Working height 14.65 m Missionary range 6.50 mtr Weight 1600 kg Petrol/electric Predpfx Asxrg H Eob Ied

Condition: ready for operation (used), functionality: fully functional, Oil Quick Pin ØBoom Pin Spacing Price: OQ65 70/70 282 430 3,000.00 € OQ70 60/60 280 330 3,000.00 € OQ80 90/90 345 510 3,500.00 € OQ80 90/90 353 515 3,500.00 € QO80 90/90 355 510 3,500.00 € OQ80 100/90 387 530 3,500.00 € OQ80 100/100 420 610 3,500.00 € OQ80 90/90 350 510 3,500.00 € OQ80 90/90 350 500 3,500.00 € OQ80 90/90 350 510 3,500.00 € OQ80 80/80 310 475 3,500.00 € OQ90 110/100 440 595 18,000.00 € OQ90 without bracket 15,000.00 € OQ90 110/110 470 590 18,000.00 € Verachtert Pin Ø Boom Pin Spacing CW40 80/80 310 445 2,000.00 € Lehnhoff Pin Ø Boom Pin Spacing HS21 80/80 465 333 2,000.00 € HS21 80/80 305 475 2,000.00 € Additional mounting plates available Predpfx Absxhdh Ss Ied Liebherr Pin Ø Boom Pin Spacing SWA 48 65/65 253 370 2,000.00 € SWA 48 80/70 350 420 2,000.00 € SWA 48 80/80 327 460 2,000.00 €

Condition: good (used), Overall dimensions: 1130 x 3350 x 1050 mm Output : 125 mm (d) Input: 125 mm (d) We recommend our vacuum pump 3289 for it. Prsdpfxent Uc Ro Ab Ijd It has a filter and can be cleaned.

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH211 SN 6.2 -Dimensions: see photos -Total dimensions: Ø 230 x 190 mm -Weight: 30 kg Prodpsi Eg Nnsfx Ab Iod

Condition: used, functionality: unexamined, Year of construction: 2007, operating hours: 966 h, machine/vehicle number: 172740708, load capacity: 120 kg, mast type: telescopic, lifting height: 14,000 mm, platform width: 1,400 mm, empty load weight: 1,650 kg, transport length: 4,000 mm, transport height: 1,950 mm, construction height: 1,950 mm, next inspection (TÜV): 02/2024, fuel type: diesel, tire condition: 50 %, Tracked lift, tracked articulated work platform Octopussy 14.12 Twin with 120 and 200 kg basket load capacity, switchable, currently without TÜV inspection but operational with diesel engine, fully hydraulic with 2 hydraulic circuits, 4 hydraulic outriggers. Pedpsw Aw Ansfx Ab Iord

Condition: new, Year of construction: 2025, functionality: fully functional, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Pedpfsrivv Eex Ab Isrd Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO AS Podpfxoi Eg Ncs Ab Iord -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2006, operating hours: 2,500 h, lifting height: 14,000 mm, overall weight: 1,650 kg, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 5 l, tire condition: 50 %, maximum load weight: 200 kg, operation weight: 1,650 kg, Self-propelled 14 meter crawler articulated work platform for 200kg and 120kg with electronic scales for sale! only 78cm clearance width and 1.95m clearance height! 2-man basket with 1.4m width, can be removed from the ladder with 2 bolts! Power and compressed air connection is available in the basket and can be used Can be operated almost silently with petrol or 230V power (so work is also possible at weekends) all functions (driving, supporting, lifting etc.) can be done with electricity as well as petrol! Good condition, white non-marking crawlers, every service carried out! functional and ready for use! (currently TÜV expired) a current TÜV inspection can also be issued on request. Psdpfx Abjvmbzqj Ijrd If you have any questions, just call or send an email

Condition: used, Transmission, planetary gear for hydraulic motor, hydraulic motor, oil motor -Manufacturer: dinamic oil, gearbox type EH201 S 6.2 MO A16B Pedpfxji Eg Nvs Ab Isrd -Dimensions: see photos -Total dimensions: Ø 230 x 178 mm -Weight: 29 kg

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2010, operating hours: 990 h, machine/vehicle number: 198871007, mast type: telescopic, lifting height: 18,000 mm, overall weight: 2,700 kg, empty load weight: 2,700 kg, transport length: 5,200 mm, transport width: 1,400 mm, transport height: 2,000 mm, construction height: 2,000 mm, next inspection (TÜV): 01/2025, fuel type: hybrid, fuel tank capacity: 9 l, tire condition: 85 %, color: white, maximum load weight: 200 kg, Self-propelled crawler telescopic work platform with 18m working height and 8.5m lateral reach with 200kg basket load!!! in very good condition, overhauled in workshop, white non-marking crawlers radio remote control, petrol and electric operation, hydraulic track widening and narrowing possible via remote control, Prsdpfxjvmbzwo Ab Iod clearance height is less than 2 meters despite 18m working height very simple design, therefore very easy to service, Honda petrol engine with speed control via remote control (quieter operation possible) All functions that are possible with the petrol engine work just as well as electrically Power and air in the basket Electronics/control units on the platform replaced, hydraulic hoses replaced, new ball bearings for electric motor, new rubber buffers, return filter, engine oil, fuel filter, air filter, paint on the platform is in good condition, no rust. the basket and the jib arm (the one in front of the basket) are rotatable (both functions are rotatable - special equipment!) the platform has a total of 3 rotation options (tower, jib arm and the basket) and each can be rotated separately! The crawler platform can be rented and purchased. new TÜV can be organized, TIMA transport trailer (with new inspection, new brakes) is also available to buy optionally for 8,000 net we can also organize transport of the platform worldwide!

Condition: new, Year of construction: 2025, An active lime production line is a set of equipment designed to produce high-quality lime from limestone, with the aim of meeting various industrial applications, such as in the production of steel, environmental desulfurization, and other processes. The process typically involves several stages, including limestone crushing, calcination, hydration, and finally, the production of active lime. Here is a general overview of the main steps involved in an active lime production line: 1. Limestone Quarrying: - Raw limestone is extracted from quarries and transported to the lime plant. The limestone may undergo crushing and sizing processes to achieve the desired particle size. 2. Limestone Preheating: - The raw limestone is typically preheated in a preheater or precalciner before entering the rotary kiln. This preheating step helps to reduce the energy consumption in the kiln by partially decarbonizing the limestone. Pedpjq Nyzbsfx Ab Ierd 3. Loading into the Rotary Kiln: - The preheated limestone is loaded into the rotary kiln, a large, rotating cylindrical furnace. The kiln is inclined at a slight angle to facilitate the movement of materials through the kiln. 4. Calcination: - In the rotary kiln, the limestone undergoes high-temperature calcination (typically in the range of 900 to 1,450 degrees Celsius). This process causes the limestone to undergo chemical and physical changes, converting it into lime (calcium oxide). 5. Cooling: - After calcination, the lime moves through the cooling zone of the kiln, where it is cooled down. This cooling step is essential to stabilize the lime and prepare it for further processing. 6. Hydration: - The quicklime produced in the kiln is then slaked with water in a hydration process to produce slaked lime (calcium hydroxide). This is typically done in a separate hydrator. 7. Separation of Unreacted Lime: - The slaked lime is separated from any unreacted quicklime or impurities. This step ensures that the final product is of high quality. 8. Filtering and Drying: - The separated slaked lime is filtered to remove excess water, and the resulting product is dried to achieve the desired moisture content. 9. Storage and Packaging: - The final product, active lime (calcium oxide), is stored in silos or other storage facilities. It can then be packaged for sale or transported to end-users. 10. Environmental Considerations: - Dust collection systems and other environmental control measures are often implemented to minimize emissions and ensure compliance with environmental regulations. The design and configuration of an active lime production line can vary based on factors such as the type of limestone used, production capacity requirements, and specific industrial applications. Modern production lines often incorporate advanced technologies to optimize energy efficiency, minimize environmental impact, and ensure high-quality active lime production.

Condition: new, Year of construction: 2025, functionality: fully functional, Fenice Plain Spray Booth Wall Brand new Available options: Plain-2000mm net price 17,800 PLN Filtration capacity 8,000 m3/h Motor power 1.5 kW Plain-3000mm net price 21,500 PLN Filtration capacity 11,000 m3/h Motor power 2.2 kW Pjdpfxoxz Ache Ab Ijrd Plain-4000mm net price 25,800 PLN Filtration capacity 15,000 m3/h Motor power 4.0 kW Plain-5000mm net price 34,000 PLN Filtration capacity 16,500 m3/h Motor power 5.5 kW Plain-6000mm net price 38,000 PLN Filtration capacity 22,000 m3/h Motor power 2.2 kW + 2.2 kW Custom sizes available on request

Condition: used, filter area: 40 m², suction capacity: 4,000 m³/h, Dust extractor, welding fume extractor, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Predoxz Dy Ujpfx Ab Ijd

Condition: used, Year of construction: 2012, operating hours: 3,745 h, type of input current: three-phase, filter area: 20 m², suction capacity: 4,600 m³/h, negative pressure: 2,800 Pa, Dust extraction unit, welding fume extractor, pneumatic vacuum filter unit and absorber by ULMATEC, designed for plasma cutting, laser cutting, sandblasting, welding dust and fumes, as well as all types of dry dust. Predoxz Dr Ropfx Ab Ijd Cartridge filter elements cleaned by compressed air. The fan is positioned behind the filter on the clean-air side, minimizing the risk of explosion. Model: IEP 20-2-2 Fan power: 2.2 kW Max airflow: 4600 m³/h Max vacuum: 2800 Pa Number of filter cartridges: 2 Filtration area: 20 m² Inlet diameter: 180 mm Year of manufacture: 2012 Operating hours: 3745 h Inventory number: 1083

Condition: used, Year of construction: 2013, type of input current: three-phase, filter area: 84 m², suction capacity: 3,000 m³/h, negative pressure: 2,900 Pa, Donaldson Torit brand welding fume extractor, dust extraction unit, self-cleaning pneumatic vacuum filter. Suitable for welding, grinding, sandblasting, and all types of dry dust. Cartridge filter elements. The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high equipment efficiency. Prsdpfoxz A A Isx Ab Isd Brand: Donaldson Torit Model: 2DFP4-SPRK Year of manufacture: 2013 Fan motor power: 4 kW Capacity: 3000 m³/h Vacuum: 2900 Pa Filtration surface: 84 m² Inlet diameter: 250 mm Equipped with "SparkTrap" spark arrestor system Dimensions: Width: 2.00 m x 1.25 m Height with pallet: 2.30 m Stock number: 1082