Used Extruder Gear for sale (8,012)

Condition: new, functionality: fully functional, - Single screw extruder - 25/25 LD screw - Motor: 2.2 kW - Wide slot die adapted 1.0 x 120 mm - With cooling rollers (200 mm wide) - Winder / haul-off Podpfxjrg Ebco Airorc - Control system

Condition: ready for operation (used), Year of construction: 1959, functionality: fully functional, machine/vehicle number: 80, total height: 1,900 mm, overall weight: 2,500 kg, total width: 2,200 mm, total length: 1,500 mm, power: 5 kW (6.80 HP), TECHNICAL DETAILS Power: 5 kW MACHINE DETAILS Drive system: Conventional Psdpfjzrmvtjx Airjrc Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,200 x 1,900 mm Unladen weight: 2,500 kg Number of transport packages: 3 EQUIPMENT Documentation New Dathan knife sets Tools Measuring accessories

Condition: good (used), DC motor, servo motor, geared motor, electric motor, DC geared motor, DC shunt-wound geared motor -Manufacturer: Stöber, DC geared motor type C002NF-0047-PF112 Prsdpfx Aezn Nmasirsc -Speed: 0-641 rpm -Engine: Type PF112 -Voltage: 160 V -Power: 0.6 kW -Shaft: Ø 20 x 40 mm -Dimensions: 395/160/H195 mm -Weight: 19.5 kg

Year of construction: 1996, condition: ready for operation (used), Output: 140-180kg/h, screw diameter: 50-103mm, screw length: 1300mm, max. screw rotational speed: 43/min, connected load: 25kW, operational hours counter: 62,590h, including dosing unit with hopper, vacuum pump, cylinder cooling aggregate and screw temperature control. Pjdpfohz Dyasx Airsrc

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Podpfx Aiex Hifvjrerc

Condition: ready for operation (used), Year of construction: 2005, A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible. Psdpfx Aijxltu Nsrorc

Condition: good (used), Geared motor, electric motor, stop motor, drive motor, crane motor, bridge crane Psdpfx Aezmfc Ieirsrc -Manufacturer: DEMAG, geared motor type 13/6 PKF 12/4 -Power: 0.05/0.17 kW -Speed: 450/1440 rpm -Shaft: Ø 14 mm -Protection rating: IP54 -Number: 2 geared motors available -Price: per piece -Dimensions: 270/210/H220 mm -Weight: 12.8 kg

Condition: used, Year of construction: 2006, workpiece diameter 5 - 1.000 mm module range 0,2 - 25 helix angle < 90 ° Control Wenzel GearTec faceplate diameter 750 mm x-axis 1.200 mm y-axis 550 mm z-axis 1.000 mm total power requirement 6,5 kW weight of the machine ca. 11 t Prodpfx Aszkvvyoirjc dimensions of the machine ca. 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco.

Year of construction: 2014, operating hours: 30,000 h, condition: used, functionality: fully functional, machine/vehicle number: 20526471, Laboratory Twin Screw Extruder – Coperion ZSK 26 Mc18 (40 L/D) with a 26 mm screw diameter Psdpfxjyhd Dbj Airorc Featuring all the characteristics of the ZSK Mc18 series, this extruder is ideal for formulation development and compound sampling, as well as for manufacturing small compound batches of up to approximately 180 kg/h. Compared to the previous model ZSK 26 Mc, the new laboratory extruder enables throughput increases of up to 100%, owing to the torque having been increased to 15 Nm/cm³. The extruder is mobile and space-saving as the control cabinet is integrated into the machine’s base frame. Heating and cooling systems are installed and operational (plug & play). Machine No.: 20526471 Year of manufacture: 2012 Operating hours: approx. 30,000 h Condition: Used, in operation Technical specifications: Extruder type: Twin screw extruder Model: ZSK 26 Mc18 Process length: 40 L/D Drive power: 36.9 kW Power supply: 3 × 400 V (−10 % / +6 %), 50 Hz ±2 % Barrel configuration: E-0-0-S-0-0-1-0-V-0 Output: approx. 150–200 kg/h, depending on formulation, raw material, and required product quality Applications: Highly filled compounds, masterbatch applications Suitable for processing: LLDPE, LDPE, HDPE, PP, PPR, PS, ABS, PET, and biopolymers Scope of delivery Gravimetric feeding system: - K-Tron gravimetric feeders - 1 × pellet feeder - 1 × powder feeder (twin screw design) Side feeding / degassing: - 1 × side feeder ZS-B25 - 1 × vacuum side degassing unit ZS-EG25 Vacuum system: Busch vacuum pump Plastex MI 0120 B 222 CNX6, specifically designed for PET applications. Please note: Vacuum pump is not included. Process monitoring: - Melt pressure sensor system - Melt temperature sensor system - PLC integration Pelletizing system (strand pelletizing): - Air dryer unit not included - Strand pelletizer SP50 - Water bath Peripheral equipment: - Bag emptying station for pellets - Conveying system to the feeders Spare parts: - Spare parts included, second screw set.

Condition: used, Year of construction: 1993, max. wheel diameter 330 mm gear width 180 mm Podpfxet Hwyfs Airorc total power requirement 12 kW weight of the machine ca. 7500 kg

Condition: ready for operation (used), Year of construction: 1970, Gear hobber ZFWZ 6300x40 Podpfx Aisxln Iwersrc Manufacturer: WMW-MODUL Model: ZFWZ 6300x40/1 Year of manufacture: 1970 Max. workpiece diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 5300 mm Cutter diameter x width: 400x500 mm Max. helical angle: 45 degrees Hob diameter: 500 mm Hob speeds: 9–63 rpm Total power requirement: 47 kW Machine weight: 160 tons Equipped with standard hobbing head, tangential hobbing head, internal milling head, change gears, supports. Video available.

Year of construction: 1979, condition: excellent (used), functionality: fully functional, ALLGAIER gear box 62/8102 suitable for BIHLER RM 40 Prsdpfx Aisu Dbb Asrsc

Condition: good (used), functionality: fully functional, Twin screw extruder / laboratory extruder Psdsu Hik Djpfx Airerc - 2 x 30mm screw diameter - 4x heating zones - dosing - Control system

Condition: excellent (used), Herringbone Gear Generator MDV 2000 MDV 2000 Characteristics: Max. wheel diameter: 2000 mm Min. wheel diameter: 50 mm Psdjfx Ibnspfx Airsrc Max. module: 12 Min. module: 3

Condition: used, Year of construction: 1980, max. wheel diameter 2500 mm gear width 1200 mm max. module 32 min. module 3 total power requirement 25 kW weight of the machine ca. 60 t dimensions of the machine ca. m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: * Hydrostatic guides in grinding slide, table and in all other guideways. * Completely covered working area with sliding doors. Predpfx Aet Hwqqjiroc * Automatic grinding process for various cycles, with settings for roughing, finishing, fine finishing and automatic dressing cycle after preset number of teeth. * Profile correction is possible via appropriate dressing, as well as additional movement of grinding slide (depth and width crowning). * Approx. 50 change gears. * Grinding slideTilt display device. * Large coolant device with band filter and oil mist exhaust. * Separate switch cabinet. * Separate hydraulic unit. * Separate oil cooling unit. Condition : Very good. Machine can soon be inspected in our showrooms. It is not under power at present. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. The machine comes directly from a first class gear factory, where it was grinding Quality 5 - 6. Grinding diagrams are available. This type and quality of machine is rarely available. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: used, Year of construction: 1996, workpiece diameter 240 mm centre distance 0 mm Predpet Hwvmjfx Airoc honing length max. 500 mm max. module 5 total power requirement 12 kW weight of the machine ca. 5000 kg dimensions of the machine ca. m

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm Pjdpfx Aiot Hwxzererc gear width 350 mm max. module 8 min. module total power requirement 7,5 - 22 kW weight of the machine ca. t dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Condition: used, Year of construction: 1985, max. wheel diameter 80 mm gear width 150 mm max. module 2,5 min. module total power requirement 10 kW weight of the machine ca. 2400 kg M I K R O N (Switzerland) Fully Automatic Gear Hobber for Worm Gears Model A 33 / 1 Year 1985 Ser.-No. 14.06/14.07/14.15 _____ max. gear- without feed magazine approx. 80 mm max. gear- with feed magazine approx. 50 mm Module max. 2, / 2,5 Axial milling length approx. 150 mm Podpjt Hw D Rjfx Airorc max. workpiece-mounting length approx. 200 mm Milling slide can be swivelled up to 90 degrees Milling cutter - 24 - 50/63 mm Max. radial distance of milling slide 0-14/18 mm Milling cutter adjustment max. 25 mm Milling cutter speed 212 - 2.000 rpm Axial feed range infinitely adjustable 0,05 - 4,0 mm/workpiece rotation radial infinitely adjustable 0,2 - 200 mm/min. Milling spindle drive 3 kW Total electrical load approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2.400 kg Accessories/Special Features: " Fully automatic operation cycle and minimum idle times due to programmable SIEMENS Program Controls S 5 for all machining steps i.e. rapid gear, feed, milling cutter on/off for the loading device, tailstock, possibly shifting, etc. with unit counter, program numbering including 30 different numeric error displays Pneumatic workpiece-loading and unloading facility parallel to work piece axis upright for rod workpieces approx. 140 mm long x 8 mm , including pneumatic double gripper for loading and unloading of work pieces. Raw parts are inserted into change cassettes externally and then placed into the loading device. The double gripper places the parts between workpiece spindle and tailstock, the tailstock spindle sleeve pushes the parts in the main spindle collet and clamps them simultaneously. The finished parts are ejected from the main spindle, then placed back again into the finished parts cassette by the gripper. The whole process is electrically monitored and checked. The complete loading facility is encased by plexiglass. " Hydraulic work piece clamping device including collets and hydraulic ejector " separate cooling system with magnetic separator * separate hydraulic system * various change gears This machine is set up for worm gears/armature shafts that can be used for adjustable car seats, window lifters, etc.

Condition: used, Year of construction: 1980, max. wheel diameter 400 mm gear width NA mm max. module 5 min. module total power requirement kW Podpfx Aist Hw Eborjrc weight of the machine ca. t dimensions of the machine ca. m Manual Two Flank Gear Tester

Condition: used, Year of construction: 1995, max. wheel diameter 80 mm gear width 120 mm max. module 3 min. module 1 control SIEMENS 840 C total power requirement 30 kW weight of the machine ca. 7500 t dimensions of the machine ca. m L I E B H E R R CNC – Controlled Gear Hobbing Machine Type LC 82 Baujahr 1995 Ser.-Nr. 0836 _____ Predpst Hw R Defx Airjc Gear-Diam. max. 80 mm Module Range 1 - 3 Helix Angle +/- 45 ° Distance Table Center to Tool Center 15 – 160 mm Hobbing Head Slide stroke vertical 250 mm Tangential Travel / Shift Travel of Tool slide 180 mm Minimum Number of Teeth 3 (!) Hob Size max. Ø x length approx. 90 - 200 mm Taper of Hob spindle HSK 50 A Workpiece Clamping length (table/Tailstock) 250 mm Infeed rates axial/radial/tangential/ 20/4/5/ mm/WP rev. Hob speed steplessly adjustable 0 – 800 rpm Hob Spindle Drive 8 kW - Total Load approx. 30 kW - 400 V – 50 Hz Total weight of Machine approx. 7.500 kg Special attachments / accessories: • SIEMENS - CNC-Control Model 840 C for 6 axis (i.e. Hob drive/table drive/ swivel angle of hob head/ Radial axis/Axial Axis/ Tangential Axis ) with a surface especially designed for the gear manufacturing with error display function. • Automatic and contactless tooth meshing device to adjust the hob into workpiece. • Automatic Shifting of hob slide. • Automatic Workpiece handling system Model SSL for high speed loading and unloading of Workpieces, consisting of a steel chain3,, for workpiece carriers and 3-fold WP-Gripper for blanks, for the machining position and for unloading of finished parts onto the steel band. Actual Workpiece size to be machined: approx.. Ø 30 x 120 mm length, helix gear sprocket. Clamping of workpiece between centers by a mechanical, cam controlled quill in tailstock. • complete workarea protection with one sliding door, chip conveyor, small coolant device, oil dust Absorber, WP Carrier, etc. The Machine can be also used for dry cutting. Condition : Satisfactory to Good . Machine can be inspected under power here in stock. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Year of construction: 2013, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 20910-01, Unused Hosokawa Bepex model BX 150 stainless steel (AISI 316) basket extruder for low pressure extrusion. Products with loose structure, large surface and good forming properties are produced with this machine. The product consists of a paste of low flow characteristics and low moisture content. The product to be processed is transported by the inlet into the machine. In the product area are two rotors which works in oposite directions to each other. - The upper 2-arm rotor with angle rotor and additional stirrers mixes and conveys the material down. Rotor is driven through gearbox by 0.55 kW, 60 Hz electrical motor, adjustable speed from approx. 14 - 139 rpm. - The lower 3-arms rotor is equipped with curved arms and rotor knives. Through the lower 3-arm rotor the product is compressed and forced through a cylindrical screen basket. The diameter of the granules results from the perforation diameter in the screen basket. Rotor is driven through gearbox by 3.0 kW, 60 Hz electrical motor, adjustable speed from approx. 15 - 144 rpm. Includes (2) extrusion screens 2 mm dia x 1.2 mm thick, switchboard with integrated control panel. Mounted on stainless steel frame with (4) wheels. Pjdpfx Aet Tvx Tjirsrc

Condition: excellent (used), Year of construction: 1989, machine/vehicle number: 0435532, MACHINE DATA Machine type Hobbing Cutter – Gear cutter Manufacturer TOS Model FO-10 Year 1989 Serial Number 0435532 Condition Very good-almost new Yet in operation Max Module 14 Min Module 1.5 Max diam. 1500mm Max Width 450mm From Z9 teeth until Z448 Main drive 12 Kw Weight 9800Kg Original color RAL 6017 Book operation – service Dimensions L 3200 – W 1800 – H 2530 Prjdpfjd R Ri Ujx Airoc Full extra accessories – parts – all module cutters Ready to work without any expensive PRICE 70.000€

Condition: excellent (used), functionality: fully functional, Different MAAG Melt Pumps available - For example Extrex 110 , 90 , 70 , 56 , 36 - Possible to order complete on a frame with , motor , gear , cardan and a controll cabinett. Podpedq Ak Uefx Airorc

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Prsdpsurulpofx Airjc Usage: Butter and Various Viscous Pastes Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, Fully reconditioned milling head from a Gleason Pfauter P210L – manufactured in 2004. Pjdpfszr Hd Rox Airjrc