Used Double Screw Extruder for sale (17,111)

Year of construction: 2022, condition: excellent (used), functionality: fully functional, We offer this very good PMH (Plasticmaschinen handelsgesellschaft) PMH DS25-32LD twin-screw extruder, year of manufacture 2022. Manufacturer: PMH Plasticmaschinen handelsgesellschaft Model: PMH DS25-32LD twin-screw extruder Year of manufacture: 2022 Condition: very good Category ID: 452 Type: PMH twin screw extruder PMH Compounder DS25-32LD, with co-rotating, segmented twin screws ("good as new") The machine is designed with an 11 kW three-phase drive and a distribution gearbox for 95 Nm at 400 rpm. The mounted safety coupling is combined with a cut-off contact in case of overload. The maximum permissible melt pressure is 150 bar and is monitored by a pressure sensor. Individual housings allow you to configure the machine flexibly according to your requirements. The segmented screws with a diameter of 25 mm are designed in the standard version with several kneading zones and a decompression zone (atmospheric degassing). Itodpfjznkx Dox Anien A blind cover for the decompression zone is included in the scope of delivery. Ceramic heaters with thermal sensors and cooling fans control the temperature. A stainless steel funnel is mounted on the filling opening. The electrical control system is integrated into the machine frame. All heating zones are switched contactlessly via solid-state relays. A swivelling touch panel is available for user-friendly operation. The head plate is equipped with a mass pressure sensor. The mass pressure monitoring system switches off the drive when the set maximum mass pressure is exceeded. tool adapter with 4-hole nozzle plate Options: Vacuum pump for the degassing zone (only atmospheric degassing offered) 3 metre water bath Air-Knife Used strand granulator If you have any questions or need more information, feel free to send us a message or give us a call.

Year of construction: 1998, operating hours: 64,082 h, condition: good (used), This Cincinnati extruder is currently in storage at Plastima Used Machinery. The machine was manufactured in 1998. – Brand: Cincinnati – Model: Titan 45R-APC Iedpezu Nnqsfx Anistn – Year of manufacture: 1998 – Conical twin-screw extruder – Screw diameter: 45 mm – Operating hours: 64,082

Condition: as good as new (ex-display), 7250 Lleal Reception Trough,Double Sigma Kneader MIxer,1500L Industrial Screw Discharge Buffer Tank, 2022, Used machine Manufacturer: Lleal, S.A. Equipment: Reception Trough Model / Capacity: I500 L Year of manufacture: 2022 Serial / Item number: 18725/2 / 5904 Electrical connection: 400 V, 3 Phase + N + PE, 50 Hz, 59 A Total power: 30.25 kW Condition: Used, like-new industrial condition Technical and operating parameters: Operating principle: Buffer and reception trough with bottom discharge extruder screw (without mixing blades) Discharge screw drive: approx. 30 kW Safety standards: CE marked, 2006/42/CE Machinery Directive Design, Operation: High-capacity 1500-liter industrial reception and buffer trough manufactured by Lleal. Designed without agitators or mixing blades, its primary function is to store high-viscosity or paste-like materials and transfer them continuously and smoothly using the integrated 30 kW bottom discharge screw to downstream packaging or processing equipment. Suitable Application Areas: Receiving and buffering pastes, doughs, or viscous masses discharged from kneaders/mixers. Intermediate storage and controlled feeding in chemical, pharmaceutical, and food process lines. Dosing and conveying heavy, non-flowing materials. 7251 - Lleal AME-1250-SF Industrial Extruder Kneader Mixer, 2022 Lleal AME-1250-SF Industrial Extruder Kneader Mixer, 2022 Manufacturer: Lleal, S.A. Model: AME-1250-SF Iedpfjz Tdd Aex Aniotn Year of manufacture: 2022 Serial / Item number: 18725/1 / 5104 Electrical connection: 400 V, 3 Phase + N + PE, 50 Hz, 173 A Total power: 90.25 kW Design: ATEX / Ex Explosion-proof execution (Group II) Condition: new, like-new industrial condition Overall dimensions (A x B x C): 4143 x 2635 x 1950 mm Mixing tank volume: Useful volume: 750 liters Total volume: 1400 liters Technical and operating parameters: Mixing blade drive: 2 pcs mixing motors, total 60 kW Extruder screw drive: 30 kW Operating principle: Heavy-duty Sigma/Z-blade kneader-mixer with integrated bottom discharge extruder screw Safety standards: CE marked (0163), 2006/42/CE Machinery Directive, and 2014/34/UE ATEX Directive Design, Operation: Top-tier high-capacity industrial Lleal AME-1250-SF extruder kneader mixer. In the 1400-liter total capacity bowl, powerful twin mixing blades driven by 60 kW total power homogenize highly viscous, dense materials. Following the process, the 30 kW bottom discharge extruder screw efficiently empties and shapes the product without air entrapment. Suitable Application Areas: Large-scale chemical and pharmaceutical processing of dense pastes, adhesives, and sealants. Heavy-duty plastics, rubber, silicone, and resin compounding and homogenization. Industrial food and cosmetics processing of heavy doughs, creams, and viscous masses

Year of construction: 2024, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 04344, BRAND NEW Leistritz ZSE Maxx Series (27 / 40 / 50) – 48 L/D – 0 Hours – Factory Wrapped! Technical Specifications Manufacturer: Leistritz Extrusionstechnik GmbH Models Available: ZSE 50 Maxx ZSE 40 Maxx ZSE 27 Maxx Year of Manufacture: 2024 Condition: 100% Brand New (Zero operating hours, completely unused, still in original factory packaging/wrapping) L/D Ratio: 48 L/D (All units upgraded directly by Leistritz with brand-new complete barrel sets and new shafts) All machines are with side feeders. Description Available for immediate individual or package sale: Three (3) pristine, 2024 Leistritz ZSE Maxx Twin-Screw Extruders (Models: ZSE 50 Maxx, ZSE 40 Maxx, and ZSE 27 Maxx). These machines were originally dedicated laboratory units held by Leistritz. To meet high-specification production requirements, Leistritz directly upgraded all three machines to a 48 L/D ratio. These OEM upgrades included a brand-new, complete barrel set and brand-new shafts installed entirely by the factory. All three machines are in 100% brand-new condition with zero (0) operating hours. They remain fully wrapped and packed in their original factory delivery boxes—they have never been opened, touched, or commissioned since arriving from Leistritz. Each machine is a complete, turnkey system supplied with its own high-end feeding setup, control architecture, and an extensive array of genuine auxiliary tools and spare parts. Scope of Delivery & Included Accessories (Per Machine) Feeding & Extrusion Setup Volumetric Feeder & Side Feeder (with dedicated side feeder trolley) Feed Ports Downstream & Die Attachments Strand Die Head, Die Plates, & Screen Carrier Plates Control & Electrical System Full Control Cabinet (including the Macrometer integrated into the operational panel) Complete set of Connection Cables & Cables for the Main Drive Comprehensive Spare Parts Kit for the control cabinet Vacuum & Degassing System Spare set of Screw Vacuum Pumps, Vacuum Hoses, & Vacuum Gauges Vacuum Pump Heating/Cooling Systems & Connection Hoses Sensors, Maintenance & Installation Melt Temperature & Melt Pressure Sensors Screw Mounting Device, Screw Extractors, & Cleaning Brushes Lifting Rods, Leveling Elements, & Corrosion Inhibitors Listing Summary for Buyers Available Models: ZSE 27 Maxx, ZSE 40 Maxx, ZSE 50 Maxx. Immediate Availability: Skip the massive factory lead times for a brand-new Leistritz line. OEM Guaranteed: All modifications and extensions to 48 L/D were performed officially by Leistritz. Ijdpfey Ufk Rsx Anietn Pricing available for individual machines or as a complete 3-machine package. Photos of the packed crates and original documentation are available upon request.

Condition: good (used), functionality: fully functional, Year of construction: 2016, machine/vehicle number: 1930036, operating hours: 6,900 h, This is a used twin-screw extruder for processing moist materials. (A complete overhaul is included in the price and will be carried out by Brabender/now Anton Paar.) The machine was used to produce textured soy protein in a purely vegan facility. The textured soy protein is moist, and it was used to produce vegan products such as "cutlets," "fish," "nuggets," "bacon," etc. Ijdozhnluspfx Anistn

Year of construction: 1996, operating hours: 25,000 h, condition: good (used), functionality: fully functional, single-screw extruder, 90 Reifenhauser, complete with electrical panel and 200 kW motor. Isdpfxozbh Aho Anietn The machine is in excellent condition.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Zsk 119 mc+, type of input current: three-phase, total length: 11,000 mm, year of last overhaul: 2024, total width: 1,500 mm, total height: 1,500 mm, overall weight: 18,000 kg, Coperion extruder, 1200 hp (930 kW), 380 volts, 50 Hz. Designed for high-moisture extrusion (TVP or HMMA, high-moisture meat analogue), with an output of 1 to 10 tons/hour. Itjdpfszti Tksx Anijn Screw diameter: 2 x 118 mm; ABB inverter for the 1200 hp motor; liquid dosing system; solid dosing system; control panel. Also available: Urchel cutting device and rotary IQF freezer. This extruder can also be used for dry or wet pet food. This equipment has very few operating hours.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, operating hours: 5,000 h, machine/vehicle number: 90201097-0010/2003, screw conveyor diameter: 44 mm, screw conveyor length: 2,420 mm, For sale is a twin-screw extruder from the renowned company Berstorff, manufactured in 2003, for the production and processing of demanding rubber and TPE compounds. The system was operated in a pilot plant of a research institute and was used exclusively for research and development purposes. Unlike systems used in industrial production, the extruder was therefore not used in continuous production. Accordingly, the machine has only a few operating hours. The extruder is particularly suitable for research and development departments, compounders, and companies in the rubber and plastics industry that are looking for a high-performance system for trials, recipe development, material testing, and small-batch production. The detailed technical data and the available screw elements can be found in the attached documentation. The existing equipment allows for flexible configuration of the screw for different compounding tasks. Isdpfxsz Eqwro Aniotn

Year of construction: 2022, operating hours: 80 h, condition: new, functionality: fully functional, Clextral extruder Type: Evolum EV032 M Extruder: 40D Barrel length: 10 x 128 mm Stroke length: 1420 mm Water: 4.5 - 5.5 Bar Air pressure: 6 Bar Steam injection: 2 - 6 bar Power: 3 x 400V, 50Hz, 83kW Dimensions: 4475 x 1200 x 2100 mm Weight: 1905 kg Only 80 operating hours! Clextral water pump Type: CLX DKM Flow: 6 - 42 l/h Pressure: max. 10 bar Reservoir: 7.5 liters Power: 0.55 kW Dimensions: 1265 x 350 x 700 mm Cextral / Prominent oil pump Type: GMXA1604 Flow: 0.3 - 2.5 l/h Pressure: max. 10 bar Reservoir: 10 liters Dimensions: 900 x 700 x 1150 mm Clextral High Moisture Extrusion Cooking die HMEC type: 2 x 800 mm length Material: CLX202 Internal section: 60 x 8 mm Dimensions: 1900 x 700 x 1200 mm TLV steam set Type: 2/10 TLV Serial number: SV148 Steam flow: 2 - 10 kg/h Steam pressure: 6 - 10 bar Maximum pressure: 10 Bar Steam inlet: DN15, PN16 Steam outlet: DN15, PN16 Air pressure: 6 - 10 bar Dimensions: 700 x 1600 x 2200 mm Weight: 150 kg 2 pcs. Tooltemp temperature control unit Type: TT1398-3 Serial number: 321-5642-1 / 2 Year of construction: 2021 Power: 3 x 400V, 50Hz, 7.9kW Isdpfoz S Idkox Anietn Dimensions: 750 x 300 x 760 mm Weight: 70 kg WAM Group ploughshare mixer Type: WBH20008C023 Serial number: 17WB220000121 Year of construction: 2022 Mixer: 75 liters Dimensions: 1200 x 1600 x 1650 mm Weight: 500 kg Immequip screw conveyor Type: ELV 70/80-R Hopper: 150 liters Output: Ø 100 mm Power: 3 x 400V, 50Hz, 0.55kW Dimensions: 3100 x 1350 x 2600 mm Brabender dosing system Type: DDW-M-DDSR20 Serial number: 2200836.0636 Year of construction: 2022 Feed rate: 11 - 26 kg/h MTA France chiller Type: TAEevo TECH 081 Serial number: 2200377928 Year of construction: 2021 Refrigerant: R410A Cooling capacity: 20.6 kW Power: 3 x 400V, 50Hz, 14.2kW Dimensions: 1950 x 800 x 1500 mm Weight: 340 kg

Condition: new, Year of construction: 2026, functionality: fully functional, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE • Model: FABO HY-600 • Type: Double Helix Screw Washer • Capacity: 60 ton per hour • Dimension: 1400 x 6650x1800 mm • Screw Size: Ø 600x6000 mm • Speed: 22 rev/min Itodpfjz R T Aksx Anisn • Motor: 2 x 5.5 kW Heavy duty Gamak • Water Consumption: 55-205 m3 • Including chassis, motor and safety guards. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2003, operating hours: 65,470 h, condition: refurbished (used), functionality: fully functional, machine/vehicle number: Titan 68R-APC/ 2 68F-60-40-1100-UT, Titan 68R-APC/2 68F-60-40-1100-UT with tungsten carbide cylinder and screw (designed for WPC-HDPE base) Very good feeding behavior and good processing. Screw modification for optimal use, including in the recycling sector. The system has been completely overhauled and is ready for use. Feeder optionally available. SIHI vacuum pump. For throughputs up to 400 kg/h. For highly filled compounds, approximately 180 kg/h. Itedpfxozh Edno Anisn 4-zone heating.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, machine/vehicle number: 230608, 4. Main Extruder Type: CWT95-Plus co-rotating twin-screw extruder; L/D 48 Itjdjzxxifopfx Anijn Machine Description: *IE5 AC 250 kW motor *Gearbox: Precise balancing principle applied to increase torque level; High safety factor design; Latest steel alloy material for gears, applied with special heat treatment and manufactured to a high level of precision; Imported NSK bearings and sealing rings; Special lubrication system combined with immersion and forced lubrication solutions; Latest generation plate heat exchanger configured for optimal cooling; Input/output rotation speed: 1480/600 rpm; Torque: 2x1990 N.M Oil pump: 1.5 kW With heat exchanger, flow meter, oil pressure gauge *Power Transmission: Compomac safety clutch torque limiter from Italy, with speed sensor *Extrusion Line: Screw diameter: 93 mm, L/D: 48:1; Maximum screw speed: 600 rpm; Screw configuration: modular structure, torque transmission via splines; Screw material: W6Mo5Cr4V2, surface hardness HRC58～64; Barrel configuration: modular structure, each barrel with a length of 4L/D; The inner surface of the linear material is made of α101, surface hardness is HRC62-64; Barrel No.1: Feeder for all possible components, No. 4 and No. 6 with a side feed port and a venting port. No. 8, 9, 11 with a suction port for degassing. The screw profile will be determined based on the requirement. *2 side feeders for lateral feeding *1 set of degassing adapted to the needs Liquid ring pump, 1m3 water tank, gas and vapor recovery system *Electrical Cabinet Enclosure: Rittal Heat Exchanger: Apex Variable Frequency Drives: ABB PLC: Siemens Components: Schneider Electric *Spare Parts One set of screw and barrel elements and one set of shafts will be delivered with the machine.

Condition: like new (used), Year of construction: 2006, operating hours: 4,545 h, functionality: fully functional, screw diameter: 114 mm, overall weight: 7,500 kg, A KMD114-32 P in like-new condition is for sale. This extruder comes from a technical institute and is therefore from a single owner. The operating hours are original and can be verified. Isdpfozxhfiox Anietn The screw and cylinder are in like-new condition. The gearbox runs very smoothly. Includes adapter, hopper, and loading onto a truck. Technical specifications: - Year of manufacture: 2006 - Screw for profile: 684 2929 / 8880 - Internal screw temperature control, welded tips - Maximum screw speed = 17 min-1 - Maximum dosing speed = 260 min-1 - 5 cylinder zones, 15 tool zones + 4 lip heaters, melt temperature, melt pressure - C5 control system with puller control, language E/D An inspection in 84405 Dorfen is possible at any time. If you have any questions, please do not hesitate to contact us.

Condition: new, Year of construction: 2026, SJSZ 51/105 Conical Twin-Screw Extruder Industrial Twin-Screw Extruder for PVC Processing The SJSZ 51/105 conical twin-screw extruder is designed for continuous processing of PVC materials and the production of rigid PVC profiles, pipes and other extruded products. The extruder features a bimetallic screw and barrel assembly made of nitrided 38CrMoAlA steel, providing high wear resistance and stable extrusion performance. The machine is equipped with a 22 kW three-phase asynchronous motor with forced cooling, a DELTA variable frequency drive, OMRON temperature controllers, and Schneider electrical components. The extruder includes an automatic material feeding system, vacuum degassing, air-cooled barrel heating zones, and an electrical control cabinet. 1. General Technical Specifications • Model: SJSZ 51/105 • Type: Conical twin-screw extruder • Processing Material: PVC • Production Capacity: 50–120 kg/h, depending on material and operating conditions • Main Motor Power: 22 kW • Motor Type: Three-phase asynchronous motor with forced cooling • Motor Speed Control: DELTA frequency inverter • Power Supply: 380 V, 3-phase, 50 Hz 2. Screw & Barrel Iedoz Nmfbjpfx Aniotn • Screw Diameter: 51/105 mm • Screw Length: 1085 mm • Screw Speed: 1–34.8 rpm • Screw & Barrel Material: 38CrMoAlA, nitrided • Screw & Barrel Design: Bimetallic • Nitriding Depth: 0.4–0.7 mm • Nitriding Hardness: ≥940 HV • Surface Roughness: Ra 0.4 μm • Bimetallic Layer Hardness: HRC 55–62 3. Heating & Cooling System • Barrel Heating Power: 12 kW 4 zones • Heating Zones: 10 • Heating Elements: Cast aluminum heaters • Barrel Cooling: Forced air cooling 3 zones • Temperature Controllers: OMRON 4. Gearbox • Gear & Shaft Material: High-strength alloy steel • Gear Treatment: Carburized, quenched and ground • Gear Hardness: HRC 54–62 • Gear Precision: Grade 6 • Screw Protection: Automatic screw displacement alarm 5. Feeding & Vacuum Degassing • Feeding Motor Power: 0.75 kW • Feeding Speed Control: DELTA frequency inverter • Feeding Operation: Independent or synchronized with extrusion • Vacuum Degassing Pump: 2.2 kW 6. Control & Electrical Components • Main Motor: 22 kW • Motor Cooling: Forced cooling • Main Frequency Inverter: DELTA • Temperature Controllers: OMRON • AC Contactors: Schneider • Electrical Control Cabinet: Included

Condition: good (used), Ballfood Extru25 screw extruder Screw extruder designed for high capacity dough production, variable speed, with ball rolling machine, 1Ph Ijdpfez E S Dtsx Anietn

Year of construction: 2001, condition: good (used), For sale: an industrial twin-screw extruder, Werner & Pfleiderer ZSK 133, now known under the Coperion brand. This machine is designed for processing and compounding plastic materials, especially PP granules, polyolefins, masterbatches, filled, and modified materials. The extruder was manufactured in 2001 and purchased used in 2015 in working condition. However, it has not been used in our production since the purchase. It has been idle since then and is being sold due to lack of use. Key specifications: capacity up to 4 t/h, main electric motor 1100 kW, voltage 690 V, frequency 50 Hz, motor speed 1492 rpm, screw speed up to 400 rpm, maximum pressure 200 bar, heating power 137 kW, 6 heating zones, dimensions 3535 × 900 × 500 mm. Itjdpfxszc I Igs Anion The extruder includes a melt pump, an underwater granulator with a die and a set of knives, a cooling system for a water bath, an oil unit with electric heaters for heating the granulation die, and hydraulic units for operating and locking the shears. Suitable for factories involved in compounding, PP granule production, masterbatch production, regranulation, and processing of large volumes of plastic.

Condition: new, Year of construction: 2025, operating hours: 2,846 h, functionality: fully functional, machine/vehicle number: 2846, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant. Itjdji Dtbqspfx Anisn

Condition: excellent (used), functionality: fully functional, DTS Double Screw Blancher, Stainless Steel Brand: DTS Year of manufacture: 2004 Power supply: 400 V Technical specifications: - Steam-heated system - Operating pressure: 6 bar - Screw dimensions: approx. Ø 1200 x 5000 mm - Water capacity: 1x 4.41 m³ and 1x 3.39 m³ Discharge conveyor: - Steel, dimensions: 4800 x 500 mm Itsdpsyku D Djfx Anisn Total footprint: 8500 x 4300 mm Machine without platform, stairs, or grating floor The DTS double screw blancher set is an advanced processing unit made entirely of stainless steel, designed for the thermal treatment and conveying of food raw materials, especially potatoes and root vegetables. Featuring a high-pressure (6 bar) steam heating system and large operational capacity, this set is ideally suited for blanching, steaming, or pre-processing in high-throughput production lines. The use of two independent, large-diameter screws ensures accurate retention time control for the product, resulting in consistent processing quality while minimizing the risk of mechanical damage to the raw material.

Year of construction: 2009, condition: used, Used Baker Perkins model MP24PH 40:1 L/D twin screw extruder. - Manufacturer: Baker Perkins - Model: MP24PH 40:1 L/D - Number of screw: Twin Screw Extruder - Rotations: co-rotating - Screw speed range: 0 - 600 rpm - Motor power: 11.2.5 kW, variable speed Barrel: Iodpfx Anjzvn Dasistn - Maximum operationg temperature: 200°C - Nominal barrel lenght: 40:1 L/D - Barrel type: one piece horizontally split clamshell barrel - Heating: electrically heated via cartrige type heaters - Cooling: water-cooled via cored barrel backing block Includes: - Touch HMI integrated in switchboard - Single screw powder feeder - Liquid feed system - liquid hopper, gear pump and flow meter

Year of construction: 1982, condition: ready for operation (used), A twin screw extruder is offered. Drive: ASEA electric motor type ACA 200-6L, 50.5kW, 1460rpm. Inspection possible by prior arrangement. Itjdjx Hifvjpfx Anien

Year of construction: 2016, condition: ready for operation (used), Control panel: Siemens SIMATIC HMI, connected load: 80kW, weight: 1.85t, operating hours: approx. 4500h, with Kreyenborg feed hopper, year of manufacture: 2017, and Trendelkamp screen changer. Documentation is complete, on-site inspection is possible. Itedpfx Ajv Uz Awjnisn

Condition: used, Cincinnati Proton 60LD30 single-screw extruders, in good working condition, ready for operation. Iedpszpd Uujfx Anistn

Year of construction: 1993, operating hours: 281 h, condition: used, functionality: unexamined, Extrudex single-screw extruder ED-N45-25D, year 1993, condition used (completely overhauled in 2014) Type: ED-N-45-25D Rated voltage: 3x400V 50Hz Control voltage: 230V 50Hz / 24VDC max. main fuse 200A Drive motor Year: 2004 Type: EFG EF132 M Ijdpfx Anoxw Tumsietn Optionally included: - Belt haul-off - Calibration table For further information, please inquire. Price on request.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Iodpfxoz A R R Ho Anijtn Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Iedpfx Ajztu Dbsnistn Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.