Used Fabric Laminating Machine for sale (94,041)

Condition: as good as new (ex-display), Trident 46 Laminating Machine - As New Condition - Single-sided or double-sided lamination – no problem, with a production width of up to 46 cm! With the Trident, you can laminate both cold and hot, all with a very cost-effective machine. The film can be cut or perforated directly. The Trident machines feature an innovative de-curling unit with two types of de-curlers: - An upper de-curling roller for heavier papers, leaving no marks on the reverse side - An adjustable-height, sharp de-curling bar for thinner papers This is the ideal solution for digital print products. For double-sided lamination, the de-curling units can be switched on or off as needed. Codjxny Riepfx Abzjhd Trident machines are equipped with premium quality silicone rollers that compensate for differences in digital print and prevent air bubbles in the film. The Trident allows you to finish your products simply and quickly. This high-quality machine is the best investment at an affordable purchase price. Various types of laminating films such as gloss, matte or semi-matte are available. Technical Data: Model 46 / 230 Volt 16A / Temperature range from cold up to 150°C Speed: 0.3 to 3 meters per minute across 9 levels Please note: This listing refers to a demonstration machine. It may show signs of use (minor scratches or yellowing).

Condition: used, Year of construction: 2006, Laminating machine TPM Katana 106 Year of manufacture 2006, approx. 36,000 operating hours For thermal and wet lamination Technical details and equipment: Max. sheet format: 106 x 165 cm Chedpfxexdhq As Abzsd Min. sheet format: 44 x 63 cm Feeder: Mabeg Extras: De-powdering and brushing device Laminating unit with drying drum and separate laminating calender. Large counterpressure roller for increased laminating pressure, 2-stage motor hydraulics Hot water heated cylinders (2 separate temperature control devices) 2-stage air jet drying (separately controllable) Sheet separator with flying knife (cross cutter) and short cut for OPP film Stacker with sheet deformation and stop rollers Central control and operation (Siemens control system / with Profibus) The system has been regularly serviced by the manufacturer and is fully functional.

Condition: good (used), Year of construction: 1998, functionality: fully functional, In Production SWEDEN; year: 1998 Size max: 1400×1100 mm Min size: 200×350 mm Top sheet: 130–450 g/m2 Bottom sheet: from 250 g/m2 Thickness: 0.6-10mm Chjdpfx Abov Ta Txszod Feeder height: 500 mm (bottom), 300 mm (top) Production depending on the materials: up to 1500 sheets/hour, The machine was technically sound at the time of dismantling. Cleaned. Dismantled.

Condition: excellent (used), Year of construction: 2004, operating hours: 38,000 h, functionality: fully functional, BILLHOFER AUTOMATIC LAMINATING MACHINE • TYPE : EK 104-50 / M • SIZE : 104 x 142 • YEAR : 2004 • WORK : 38.000 Hours • LOCATION : Istanbul DETAILS: Automatic Feeder A-20-P (Double Sheet Control) Seperator Laminated Delivery Table Chodpfx Abew Ta I Hszed Electrical Cabinets Very Good Condition Available Immediately

Condition: used, Year of construction: 2013, • Web width: 1300 mm • Max mechanical speed: 400 m/min (depending on materials and process) • Substrate types: Film, foil, paper, and combinations thereof Main Components and Features Automatic web tension control across all unwinds and rewinds Motorized adjustment for nip pressure and web alignment Touchscreen HMI for process control and recipe management Modular design for easy access and maintenance Web inspection and defect detection (if installed) Corona Treatment Unit Nordmeccanica Solventless Mixing Unit Continuous, inline mixing of two-component adhesive system Equipped with: Precision gear pumps for both A and B components Automatic ratio control and monitoring Pumps for continuous filling to ensure uninterrupted production Easy-access design for cleaning and maintenance Drying Tunnel Equipped with 2 thermal oil heating batteries Provide stable and efficient heat transfer Maintain consistent tunnel temperature, essential for proper adhesive drying Integrated with 2 modulating valves Automatically adjust the thermal oil flow Codpfoxg Hqaex Abzshd Enable fine control of tunnel temperature for different lamination applications LEL (Lower Explosive Limit) Monitoring System Zellweger LEL sensor. Continuously monitors solvent vapor concentration

Condition: good (used), Komfi Amiga 52 Laminator Laminating Machine The machine is 100% efficient, ready to work. It is an advanced, high-performance machine, perfect for service laminating. The machine is in very good condition, ready for production. Chjdpfxjwt Sp Ds Abzod Year of production 2014. Technical data: Max sheet size: 530mm x 800mm Min sheet size: 200mm x 200mm Min grammage: 115 gsm Max grammage: 600 gsm Operating temperature: 80-145°C Max operating speed: 25m/min Built-in Becker compressor Weight: 600 kg 380V power supply Additional air 6 Bar Pneumatic pressure, separation and automatic feeding from a high stack. Touch panel for easy operation. Sheet straightening module. Tool set and foil included.

Condition: used, Year of construction: 2009, functionality: fully functional, Complete laminating machine with: automatic feeder, automatic pressure roller, pile sheet feeder. Cedsxdm E Espfx Abzjhd

Year of construction: 2012, condition: ready for operation (used), An Autobond laminating system for sheet-shaped and heat-resistant products is available. Laminating speed: 60m/min, min. sheet dimensions X/Y: 285mm/320mm, max. sheet dimensions X/Y: 1060mm/1060mm, paper thickness range: 90g-650g/m², min. laminating film thickness: 24µm, max. roller pressure: 6t, max. temperature pressure water unit/control: 140°C/135°C. Machine dimensions X/Y: approx. 4000mm/1600mm, weight: approx. 2000kg, operating hours: 28785h. Documentation available. An on-site inspection is possible. Chjdpfxoxbrw Uj Abzed

Year of construction: 2009, condition: ready for operation (used), LAMINATING MACHINE FOR DOORS IPS Chjdpfx Aehkr Anjbzed MOD. PC-2500-SCBP Machine for the application of adhesive protective film on flat surfaces. Equipped with motorized feed with rollers and automatic cutting system. Machine for fixed height table line +/- 900 mm. Year 2009. Top and bottom gluing at the same time. TECHNICAL CHARACTERISTICS OF THE MACHINE - MINIMUM / MAXIMUM WORKING THICKNESS 15 / 50 MM - MAXIMUM WORKING WIDTH 2.400 MM - HEIGHT OF THE ROLLERS ADJUSTABLE TO THE FLOOR 840 / 950 MM - TOTAL POWER CONSUMPTION 3 KW - MINIMUM AIR PRESSURE REQUIRED 6 BAR - VOLTAGE ELECTRICAL INSTALLATION 220 V - 380 V

Condition: excellent (used), Year of construction: 1993, operating hours: 48,195 h, functionality: fully functional, BILLHOFER AUTOMATIC LAMINATING MACHINE • TYPE : EK 102-50 / M • SIZE : 102 x 114 • YEAR : 2003 Csdpfx Abjw Ta Iyozehd • WORK : 48.195 Hours • LOCATION : Istanbul DETAILS: Automatic Feeder A-20-P (Double Sheet Control) Seperator Laminated Delivery Table Electrical Cabinets Very Good Condition Available Immediately

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, Zünd S3 L 1200 Chjdpfx Ajv T Tzvebzjd CNC Cutter

Condition: good (used), Laminating machine Matrix MX 530 Machine in very good condition, comes from a small digital printing house. The set with the machine includes foil and user manual. Cedpfxjvkt N Ij Abzohd Description: MATRIX is a semi-automatic laminating machine for hot laminating with a built-in sheet separator. The device is designed for laminating digital or offset prints in low and medium circulation. It can be operated by one operator at a speed of up to 10 m / min. Additional advantages are quiet operation and a small area it occupies in the printing house. Key features of the device: Semi-automatic mode (the operator feeds the sheets onto the table, the next cycle is automatic) Multi-level, adjustable „anti-curling” roller system straightening the sheets Built-in, automatic sheet separator The device is suitable for both digital and offset printing Quick format changes and easy replacement of film rolls (3000m rolls) Device operation cycle: The programmer allows you to adjust the speed, overlap length and temperature The operator feeds the sheets manually The sheets are automatically taken by the rollers according to the set overlap Ready, separated sheets are delivered to the receiving tray Maximum film width 500 mm Maximum paper width 530 mm Maximum paper length 1200 mm Minimum paper format 200 x 300 mm Laminating speed up to 10 meters per minute Front table dimensions 668 x 542mm Paper weight 115-350 g/m2 Temperature 80 – 130 °C Warm-up time 10-15 minutes Dimensions 84x210x131.5cm Power consumption 1.5-2kW Power supply 230V,50Hz Weight with base 194/260kg

Condition: reconditioned (used), functionality: fully functional, The Lamina FA Blackline 1620BL is a highly accurate, high speed sheet-to-sheet fully automatic laminating/mounting machine. The machine can handle most of the existing materials in the market. The modular construction allows easy upgrading and maintainance resulting in a machine that lasts for many years. Max. sheet size: width: 1600 mm length: 2000 mm Min. sheet size: width: 350 mm length: 350 mm Feeder Capacity: Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Air Requirements: Cedpow Hrrrjfx Abzshd 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Can be additionally equipped with Optional Laminating Machine PB 1600 Pressure Belt

Condition: like new (used), Year of construction: 2023, operating hours: 1,000 h, functionality: fully functional, Multi-layer textile cutter with spreading machine and 6+6 meter table + digitizer. Cutting width: 1800 mm Cutting length: 2000 mm Chjdow Invuspfx Abzsd Spreading machine working width: 2100 mm Spreading table: 6+6 meters (currently using 6 meters, with an additional 6 meters available) Automatic digitizer working area: 2400 mm x 1200 mm, working speed: 3300 mm/min Capable of cutting up to 50 layers of material. The machine was in use for one and a half years, but not used daily. It is in almost new condition! Reason for sale: backpack factory closure.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, Manufacturer BARBERAN Model ECOLINE 1400 S Cedpfx Asrur Txjbzshd Type of machine Laminating machine Year of manufacture 2007 Readiness dismantled / stored Technical data: Material width max mm 1300 Principle Thermal lamination Film storage Width of film max mm 1300 Material thickness min mm 3 Material thickness max mm 70 Feed rate max m/min 25 Feed rate infinite Machining Single-sided Clamping Steel roller Vacuum Brushing machine Glue application Roller application Storage space 1 Heating device Infrared CE mark

Condition: good (used), Year of construction: 2000, operating hours: 46,516 h, functionality: fully functional, BILLHOFER AUTOMATIC LAMINATED MACHINE • TYPE : EK 102-50 • SIZE : 102 x 114 • YEAR : 2000 • WORK : 46.516 Hours Cjdpfxovm Ab Ee Abzjhd DETAILS: Automatic Feeder A-20-P (Double Sheet Control) Seperator Laminated Delivery Table Electrical Cabinets Very Good Condition Available Immediately

Condition: excellent (used), Vivid Easymount EM-1650DH Manufacturer: Vivid Laminating Technologies Easymount EM-1650DH Laminator Description: For sale is a professional laminator Easymount EM-1650DH from Vivid Laminating Technologies. This machine is ideally suited for print shops, sign makers, or graphic studios, and enables high-quality double-sided hot lamination up to 1650 mm width. Overview & Applications: The Easymount EM-1650DH is a powerful, double-sided heated wide-format laminator designed for professional use in print finishing and sign production. It is excellent for: - Posters, graphic prints, signs - Mounting onto boards - Pop-up displays - Vinyl, adhesive films, and application tapes - Outdoor advertising and banners The machine enables both hot and cold lamination, as well as mounting work with double-sided lamination for precise results. Features & Benefits: - Professional-grade double-sided hot lamination - Robust industrial quality for daily use - Ideal for banners, posters, signs, roll-ups, displays, etc. - Also suitable for board mounting - Easy operation via clear digital panel - Compatible with all common 3" film rolls - Optional accessories available (e.g., take-up system, additional mandrels) Model: Easymount EM-1650DH Series: Code EM-1650 Max. Film Width: 1650 mm Model Type: DH = Double Hot (heated upper & lower roller) Suitable for: professional double-sided hot lamination Technical Specifications: Feature / Value Laminating speed: 6 m/min Laminating width: max. 1650 mm Max. material thickness: 25 mm Roll diameter: 130 mm Warm-up time: approx. 20–25 minutes Codpfx Abew Ebckjzjhd Roller heating: Infrared (internal) Temperature range: 0–130 °C Control panel: Digital Pressure adjustment: Manual with display Film core: 75 mm (3") Dimensions (W×D×H): 1990 × 650 × 1255 mm Power supply: 220/240 V, 32 A, 3200 W Weight: 365 kg Condition: used Scope of delivery: (See image) (Changes and errors in technical data and specifications reserved!) Shipping: Pick-up preferred, shipping by freight forwarder possible upon request! For further questions, please feel free to contact us by phone.

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine Chedpfsw Ic H Isx Abzed The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Ask about the product

Year of construction: 1992, condition: ready for operation (used), Max. working width: 1800mm, heating capacity: 111kW, controls: Siemens SIMATIC 5, length: 22,000mm, height: 4500mm, with bobbin carriage, unwinding station, fabric storage, rotating frame, platform, support frame, vibrating conveyor chute, spreading roller, feed rollers, scattering machine, powder conveyor, IR emitter, pyrometer, calender unit, ascending batch winder, cross-cutting device, other elements and accessories, including extensive documentation, suitable for all web-shaped materials such as foams, non-wovens, textiles, paper, etc., open coatings can also be made, i.e. coatings with powder/adhesive that can be reactivated later, e.g. preparation for thermoformed parts, stiffening nonwovens can also be produced, such as those used to reinforce shirt and jacket collars, on-site inspection is possible, the machine was completely overhauled around ten years ago and has not been used much since. Chsdpfx Asq Ixglsbzod

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, LAMINA 1116 FAS+ Cedjwc Trfjpfx Abzohd Machine in production, can be inspected in Bucharest, Romania. Model/ Width/ Length/ Width/ Length/ Weight 1116 FL+/ 1100 mm (43”)/ 1600 mm (63”)/ 2150 mm (85”)/ 6800 mm (267”)/ 2500 kg (5510 lbs).

Condition: reconditioned (used), functionality: fully functional, Lamina System Semi automatic laminator SA 1416. In very good technical condition, after total renovation. Machine on power, can be tested. Max. sheet size: width: 1400 mm length: 1600 mm Min. sheet size: width: 200 mm length: 350 mm Top Sheet: 130 to 450 g/m2 1 pts = 28,25 g/m2 Bottom Sheet: From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 corrugated from 0,6 - 10 mm (0,016” - 0,39”) Cjdpfx Abjwz Ev Tszehd Automatic substrate feeder with continuous sheet feeding The machine is built on a rigid frame structure made of anodized aluminum profiles. Width (with platforms) - 2350 mm, length - 4600 mm.

Condition: new, Year of construction: 2025, operating hours: 20 h, machine/vehicle number: Parmel_042025PA, Single Ply Cutter – Fabric & Textile Cutting Machine Our single ply cutters are the ideal solution for the precise cutting of textiles, leather, technical fabrics, and composite materials. With state-of-the-art CNC technology, they guarantee: • Maximum cutting precision for samples, prototypes, and series production • Flexibility for different materials and formats • Efficiency thanks to short setup times and automated processes Whether in the fashion, furniture, or automotive industry – our fabric & textile cutting machines deliver perfect results with maximum productivity. Model SC 1625 • Single-ply cutting up to 25 mm height • Working area (W × L): 1600 mm × 2500 mm • 2 cutting heads, double toolhead, needle punch kit, and plotting pen holder • Tool package: ERT, EOT, VPT (electric rotary knife, oscillating knife, punching module) • KIS (Knife Initialization System) • JWCS CAD/CAM Control Software • Vacuum pump • Air compressor • Passive roll feeder for non-elastic fabric • Parmel Cutting Software Cedpfjw N Rz Asx Abzjhd • 12-month warranty We provide installation, training, spare parts, consumables, and guarantee smooth operation both during and after the warranty period.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 4C0524, Lector Vectra 500 2004. No.: 4C0524 Reliable, very good machine! width: 180 cm Chsdpfx Abow Am S Sszjd length: 210 cm CNC cutting machine

Condition: ready for operation (used), Four fabric inspection machines are available (1) Menzel WOB 1.600mm fabric inspection machine, working width: 1600mm (2) Menzel WOB 3.200mm fabric inspection machine from Hoftex, working width: 3200mm (3) Bauch Maschinenbau CB-WU 380 fabric inspection machine (4) Maag CT 5206-Ah fabric inspection machine. On-site viewing is possible. Codpfsw R Uzvox Abzjhd

Condition: new, Year of construction: 2018, functionality: fully functional, working width: 2,200 mm, warranty duration: 6 months, Absolutely new hot gluing station Lamina GL2200. Year of manufacture 2018. In protective film. Removable table. Instaled a hot gluing system Xmelt, from HHS, with two guns. Guarantee. For more detailed information please contact us by email. Csdpfstpvv Dex Abzehd