Used Lining Machine for sale (68,546)

Year of construction: 1985, condition: used, functionality: fully functional, PM 5 PAPER MACHINE + STOCK PREPARATION / DEINKING PLANT + GOEBEL U16M !contact for full details and photos! Package sale of an integrated paper production installation in Hainsberg, Germany. The package includes the PM 5 paper machine, its associated stock preparation and deinking plant, and a Goebel U16M roll slitter rewinder. Hsdpfxsz Hvmhs Ah Usfn PM 5 was originally built in 1985 and modernised several times. Main sections: approach-flow system – PAMA; headbox – Voith; Fourdrinier section – PAMA; top-wire former – Valmet; press section – PAMA; dryer sections – PAMA; SpeedFlow system – Voith; after-dryer section, calender and Pope reel – PAMA. Reported modernisations: Valmet top-wire former (1994); approach-flow system expansion/modernisation (2002–2003); MAP quality-control system (2006); Voith SpeedFlow (2009); automatic tail cutter (2025). PM 5 specifications: • Working width: approx. 2,730 mm; trimmed width: approx. 2,640 mm • Maximum speed: up to 600 m/min • Maximum gross capacity: up to 150 tonnes/day • Basis-weight range: approx. 45–130 g/m² • Grades produced include office, copy, writing, printing, envelope and newsprint papers • Installed electrical power: approx. 2.5 MW • Steam consumption: up to approx. 16 tonnes/hour Stock preparation/deinking plant: • Normal capacity: approx. 125 tonnes/day; up to approx. 140 tonnes/day under suitable raw-material and process conditions • Essential components listed in the available technical documentation are reported to remain installed on site • Older Siemens S5 and Teleperm control and automation system Goebel U16M: built in 2005, machine no. 053-9031. Working width 2,800 mm; maximum speed 2,000 m/min; maximum unwind diameter 2,000 mm; maximum rewind diameter 1,500 mm; minimum cutting width 150 mm. Available accessories include winding shafts and an edge-trim extraction system with shredder and flat turbo disintegrator. Operating status: Production stopped on 23 January 2026. According to the seller, PM 5 and the stock preparation/deinking plant were operating until the controlled shutdown. The Goebel U16M was also reported operational until that date, with no significant functional faults Maximum capacities depend on paper grade, raw material and operating conditions. Inspection by appointment. Price on request.

Condition: like new (used), Year of construction: 2009, functionality: fully functional, This automatic wrapping machine is specially designed for use with dry ice slices and/or blocks. All parts in contact with the product are made of stainless steel. Automatic pitch adjustment on the conveyor, and all motors are torque-controlled. The welding temperature is displayed and electronically controlled. The control panel consists of various instruments and visual alarms and is equipped with a self-diagnostic device. TECHNICAL DATA Working speed: Up to 25 wraps per minute, 25 meters of film per minute. Hfjdpfx Aozxggleh Uon Product size: Max wrap width: 250mm, Max wrap height: 60mm, Wrap length: 40 to 260mm, 140 to 580mm and 200 to 800mm. Compressed air: 4 to 5 bars Version: standard version is right-hand Cold Jet dry ice machine for sale, dry ice machine for sale, dry ice blasting machine for sale, buy dry ice blasting machine, dry ice blaster for sale, dry ice blasting machine for sale, industrial dry ice blaster for sale, CO2 cleaning machine for sale, Cold Jet Aero 30 for sale, Cold Jet Aero 40FP for sale, Cold Jet Aero 40HP for sale, Cold Jet Aero 75 for sale, Cold Jet Aero 75 DX for sale, Cold Jet Aero75 DX, Cold Jet 75DX, used Cold Jet machine, second-hand dry ice blasting machine, Cold Jet Aero series, Cold Jet i3 MicroClean, Cold Jet E-CO2, Cold Jet SDI Select 60, Cold Jet IceRocket, Cold Jet Elite 20, Cold Jet Dry Icepress, Cold Jet pelletizer, dry ice blaster, dry ice cleaning machine, industrial dry ice cleaning system, pellet dry ice blaster, dry ice blasting equipment, cryogenic cleaning machine, CO2 blasting machine, carbon dioxide blaster, industrial cleaning, machine cleaning, maintenance cleaning, production line cleaning, die cleaning without disassembly, paint removal dry ice, coating removal dry ice, rust removal, fire and soot damage cleaning, electrical cabinet cleaning, food industry cleaning, automotive cleaning, printing press cleaning, dry ice blaster 20 bar, high pressure dry ice blaster, non-abrasive cleaning machine, refurbished dry ice machine, 20 ft blasting hose, dry ice blasting gun, venturi nozzle, Kärcher Ice Blaster, Kärcher IB 7/40, Kärcher IB 15/120, ASCO Jet, Cryoblaster, ICS Dry Ice, Nozzitec, Triventek, Cryonomic, Südstrahl, White Lion dry ice blaster, ICEsonic dry ice blaster, dry ice blasting machine Netherlands, dry ice machine Noordwijkerhout, industrial cleaning equipment Europe, export dry ice machine, DrDryice

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, type of input current: three-phase, Elumatec VS 750 four-head welding machine with EV850 4-axis CNC cleaning line. The welding machine and cleaner are currently programmed only for SCHÜCO profiles. Hfodpfx Aex E Rd Deh Ujn Profile height range for welding: 30-185 mm Minimum window dimensions for welding: 350 x 350 mm Maximum window dimensions for welding: 2600 x 4000 mm Weld bead limitation: 0.2 mm and 2 mm The welding machine features a touch operator panel based on Windows XP The cleaner is also equipped with an operator panel Online connection is available between the welding machine and the cleaner After welding, automatic transport to the cleaner is provided The cleaner operates in both manual and automatic mode In automatic mode, the rotation station turns the window to each specific corner to be processed by the cleaner. We provide assistance with machine disassembly and loading for transport.

Condition: repair required (used), functionality: not functional, Drilling machines for turned parts – TRIADE FIR-6 Hsdpszmxf Ajfx Ah Uefn Defective – PLC controller missing.

Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Hfedjzimgtepfx Ah Uen Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Zwick / Roell Material Testing Machine / Universal Testing Machine Zwick / Roell Z020 Allround-Line BT2-FR020TNW.A50 20 kN material testing machine for tensile and compression testing with testControl II & testXpert V3.5 For sale is a used material testing machine from the manufacturer Zwick / Roell. The machine is suitable for tensile and compression tests on metals, plastics, elastomers, composite materials, and numerous other materials in the laboratory, quality assurance, research and development. Technical data: Manufacturer: Zwick / Roell Model series: Z020 Allround-Line Type: BT2-FR020TNW.A50 Testing force: 20 kN Testing direction: Tensile & Compression Testing space height: 1000 mm Crosshead speed: 0.0005–1000 mm/min Power connection: 230 V / 50–60 Hz Power consumption: 8 A Electronics: testControl II Software: Zwick / Roell testXpert V3.5 Equipment: Servo-electric material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Testing table Hfjdpfxezra Rqs Ah Ujn Test fixture Various connection and cable sets Accessories as shown in the pictures Dimensions and weight: Machine dimensions (approx.): 1244 × 690 × 1324 mm (W × D × H) Weight: approx. 212 kg Application areas: Tensile testing Compression testing Material testing Quality assurance Research & Development Testing laboratory Education and training Scope of supply: 1 × Zwick / Roell Z020 Allround-Line material testing machine testControl II control system Industrial PC with installed testXpert V3.5 software 20 kN Xforce P load cell 2.5 kN Xforce P load cell Connection and cable sets Further accessories as shown in the pictures Condition: Used Visual condition as shown in the pictures Functional scope as shown in the pictures Nameplates are present The table, monitor, keyboard, and mouse shown in the photos, as well as any other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding possible. Subject to change, errors and prior sale. We will be happy to answer any further questions by telephone.

Year of construction: 2018, condition: new, functionality: fully functional, machine/vehicle number: CD-2008II, FOR SALE: CD-2008II Two-Line Wet Wipe Machine (Unused / Like New) We are offering a CD-2008II two-line wet wipe production machine in excellent condition. The machine has never been used in production, only tested, and is therefore in like-new condition. Key Features: • Double-line production (high efficiency) • Significantly faster than the standard CD-2008 model • Includes: folding, wetting, and cutting systems • Suitable for various wipe types (baby wipes, hygiene wipes, etc.) Condition: • Unused / test run only / zero production hours • Fully functional • Available for inspection or video demonstration Hodpfx Ahey Tkgzo Uefn Important: • Packaging unit NOT included (converting machine only) This is a great opportunity to purchase a near-new industrial machine at a significantly reduced price. 📍 Location: [Budapest, Hungary] 📦 Ready for immediate delivery Shipping and handling are the responsibility of the buyer. For more information, photos, or videos, please contact us.

Condition: used, Year of construction: 1995, Hole row and fitting drilling machine Year of manufacture: 1995 Single-row hole row and fitting drilling machine Hinge plates and fittings can be processed without major retooling Workpiece width max. 600 mm Drilling bar with 15 spindles, spacing 32 mm Indexing system, manual, with stop guides Drilling length max. 480 mm Hedpez H Dwnjfx Ah Uefn Motor 2.2 kW - 2800 rpm Drill chuck 10 mm with clamping surface Operating pressure 6 bar Weight: approx. 220 kg Availability: short-term Location: Flörsheim

Condition: excellent (used), IM Very good condition. Hodpfx Aoytc Naoh Usfn

Condition: ready for operation (used), functionality: fully functional, AYEN push-rod drilling unit electro-pneumatic push-rod drilling unit various types Hsdpfsqv Ey Ujx Ah Uefn 2 units RPM 1C, 0.73 kW – €450 each 1 unit RPM 0.5C, 0.37 kW – €400

Year of construction: 2024, condition: new, We are offering this new Machine Wala Enterprise MSA-2 double-die semi-automatic paper plate making machine, manufactured in 2024. Hodpfxoz E Damo Ah Usfn Manufacturer: Machine Wala Enterprise Model: MSA-2 Year of Manufacture: 2024 Condition: New Category ID: 691 Type: Double-die semi-automatic paper plate making machine If you have any questions or require further information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2009, total length: 3,900 mm, total width: 1,450 mm, total height: 1,500 mm, overall weight: 1,500 kg, type of input current: three-phase, input voltage: 400 V, working width: 600 mm, Equipment: type plate available, For Sale: 2x Tromp Make-up, Rolling and Cutting Unit Machines These machines can be integrated into a laminating line, for example in a Tromp, Rademaker, or Fritsch line, etc. Inspection on location is possible. Specifications: - Length x Width x Height (each): 3900 mm x 1450 mm x 1500 mm - Conveyor belt - Module for dough rolling (for baguettes, etc.) - The module can be lifted if no rolled products are needed - Flour duster - Cutting unit for smaller rolled products - Moulder for dividing into 4 dough pieces - Mechanically adjustable height - Almost as new, well maintained - Delivered complete - Belt width: 650 mm - Working width: 600 mm - Output width / exit working width: 1x 800 mm and 1x 900 mm Price per unit: €50,000 Hfsdpfx Asx Eb Absh Uon Transport upon agreement If you have any questions or comments, please let us know. Best regards, Leo Holland

Condition: used, Coil Handler and Straightening Machine EBU Strip Processing Line Straightening Machine EBU, Type RE 7.50-320 Year of Manufacture 2004 Strip Nominal Width 320 mm Strip Width max. 320 mm Strip Thickness max. 3 mm Strip Cross-Section max. 1000 mm2 Power Supply 400 Volts, 50 Hz Unwinding Coil Handler EBU, Type BSH 3/320 Hfodsz Ek Scjpfx Ah Ujn Manufacturer 10838, Year of Manufacture 2004 Coil Weight max. 2500 kg Coil Width 320 mm Power Supply 400 Volts, 50 Hz - Central expansion - Drive via geared brake motor - 3 starting arms

Year of construction: 2011, condition: excellent (used), functionality: fully functional, Rigid machine structure with large access doors. Integrated 600 dpi printer. Designer 2 user license. Slide-out mechanism (rear-side) for easy and fast label or ribbon replacement. Label rotation programmable in 1° increments. Vacuum sensing of the label from pick-up to placement. CCD camera to read the label before pick-up. Controlled by an industrial PC. Conveyor width adjustment using a hand crank. PCB side clamping. Active support base including 4 magnetic pins. Quick product change-over. Hfsdpfxjzmxyte Ah Usn Selectable by-pass operation. Uninterruptible power supply (UPS). SATO bar code printer EX2 Tower light display for machine status. CE certified. SPECIFICATIONS Printer type: SATO (600 dpi) Minimum label size: 6 x 6 mm Label creation software: ZebraDesigner 2 Cycle time: 2.5 sec. per label (6 x 6 mm) Labelling area: 460 x 460 mm Conveyor type: 3 mm ESD edge belt Conveyor speed: 24 m/min System software: Windows Network interface: Ethernet Monitor: 21” high-density flatscreen PCB transfer height: 950 mm ± 25 mm* Component clearance: Top 30 mm, bottom 30 mm* Machine interface: SMEMA* Colour: RAL9002* Power supply: 230 VAC/50 Hz/1 Ph Power consumption: 700 VA max. Air supply: 6 bar Air consumption: 70 ltr/min max. Noise level: Max. 65 dB * or specify MACHINE SIZES Machine L x W x H (mm): 850 x 1680 x 1440 Weight (Kg): 750 Applicable PCB Length (mm): 80 - 508 Applicable PCB Width (mm): 65 - 460 PCB thickness (mm): 0.6 - 4 Fixed rail to front (A) (mm): 335

Condition: ready for operation (used), Year of construction: 2013, Fritsch Easyline make up pastry line year of build 2013 table length overall 573cm. conveyor belt width 65cm guillotine filling depositor cutting knives etc. pictures BEFORE cleaning Hfjdpfezv R Emsx Ah Uon

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Slot drilling machine, like new, hardly used. Hjdey Tk Ufopfx Ah Ujfn

Condition: used, Second-hand machine Hfsdpfx Ahszk Nwde Uon Second-hand Ganner Compact 30 row drilling machine Features and technical specifications: 2 drilling beams, each with 15 spindles Pitch 32 mm Drilling unit position adjustment 0–650 mm Distance between rows of drill holes: at least 190 mm Spindle speed 2800 rpm Motor power 2 x 0.75 kW Maximum workpiece clamping height: 70 mm Working height 850 mm Compressed air connection 6 bar Availability: by arrangement Location: Solingen

Year of construction: 2020, operating hours: 10,000 h, condition: excellent (used), functionality: unexamined, FFP1,FFP2,FFP3,Carbon Layer Available Cup type, C type, Duckbill type, Flat-Fold type. FFP2 masks are suitable for filtering out at least 94% of airborne particles, including dust, smoke, aerosols, and droplets. They protect against hazardous materials up to 10 times the workplace exposure limit. They are widely used across several settings: Healthcare: Protecting wearers against airborne viruses, bacteria, and pathogens (such as influenza and COVID-19). Construction & DIY: Safeguarding lungs from hazardous dusts generated by drilling, masonry work, plastering, sanding, and handling loft insulation. Industry: Filtering oil and water-based mists, as well as dusts found in woodworking, agriculture, and waste management. An FFP3 mask (Filtering Facepiece 3) is a high-grade respirator used to protect against hazardous airborne substances. It filters at least 99% of airborne particles and is essential in environments with high concentrations of toxic dusts, aerosols, and pathogens. Hfjdpfx Asza E Rash Usn

Condition: new, PVC Line – YILMAZ TK 503 Single-Head Welding Machine + YILMAZ CA 601 Corner Cleaning Machine – Year 2023 The line consists of two professional machines designed for welding PVC profiles and subsequently cleaning the welded corners: YILMAZ TK 503 single-head welding machine YILMAZ CA 601 corner cleaning machine Together, these two machines make it possible to complete the PVC profile welding cycle and subsequently remove welding beads and processing residues from the welded corners. 1. YILMAZ TK 503 - Single-Head Welding Machine for PVC Single-head welding machine designed to join PVC profiles at continuously adjustable angles ranging from 30° to 180°. The machine allows the operator to select the welding bead thickness between the standard 2.0 mm configuration and the reduced 0.2 mm configuration. The melting and welding times, pressure and temperature can be adjusted according to the profile specifications. Main features Continuously adjustable welding angle from 30° to 180° Standard 2.0 mm or reduced 0.2 mm welding bead Maximum profile height: 165 mm Automatic start and completion of the welding cycle Adjustable temperature from 0 to 300°C Separate profile clamping by foot pedal Quick mould-change system Support arms for long profiles Hfodpfxoz D Dhzs Ah Usn Quick replacement of the Teflon coating Mobile machine frame Included accessories Profile support arms on both sides Electric foot pedal Technical specifications Installed power: 1.5 kW Power supply: 230 V AC, single-phase Frequency: 50/60 Hz Air consumption: 20 l/min Operating pressure: 6–8 bar Dimensions: 600 × 1,915 × 1,400 mm Net weight: 113 kg Gross weight: 128 kg 2. YILMAZ CA 601 - Corner Cleaning Machine for PVC Corner cleaning machine designed for finishing PVC profiles welded at 90°. The machine cleans the upper and lower surfaces and the external corners, accurately removing welding beads and residues generated during the welding process. The hydropneumatic system, PLC control and vertical and horizontal clamps ensure stability and precision throughout the working cycle. Main features Cleaning of PVC profiles welded at 90° Cleaning of upper and lower surfaces and external corners PLC control system Hydropneumatic operation Maximum profile dimensions: 130 × 180 mm Minimum profile dimensions: 30 × 30 mm Pneumatic blade-change system Profile clamping by vertical and horizontal clamps Profile centring system Adjustable cleaning tools for laminated and non-laminated profiles Single or multiple cleaning cycles Automatic cycle start and stop Included accessories Compressed-air gun Support table Two milling cutters for cleaning white profiles Technical specifications Installed power: 1.2 kW Power supply: 400 V AC, three-phase Frequency: 50/60 Hz Maximum cutter diameter: 215 mm Bore diameter: 32 mm Air consumption: 36 l/min Operating pressure: 6–8 bar Dimensions: 1,375 × 2,405 × 1,255 mm Net weight: 176 kg Gross weight: 210 kg

Condition: good (used), Year of construction: 1990, type of input current: three-phase, Film wrapping machine + shrink tunnel KUPER DUPLEX 2100/650 + KUPER ST/I-1400 Film wrapping machine Manufacturer: Kuper Type: DUPLEX 2100/650 Year of manufacture: 1995 Film roll width at the top: 2000 mm Film roll width at the bottom: 2000 mm Packaged goods height (passage height): 650 mm Film roll diameter: 400 mm Compressed air: min 5 bar Compressed air consumption (per cycle): approx. 16 L swing arm with chain lift seal bar Hfjdpfxjkn Rz Ho Ah Uen length 2100 mm "Siemens" control panel overall dimensions: 3000x2000x2300 mm Shrink tunnel: Manufacturer: Kuper ST/I-1400 year of manufacture: ca 1988 max capacity: width: 1350mm height: 650mm work length: 3000mm 2 pcs centrifugal fan blow-off units heating power: 59 kW temperature range 230 °C endless conveyor belt throughput speed 5 m/min Length: 3500 mm Width: 2350 mm Height: 1850 mm

Condition: ready for operation (used), Year of construction: 2010, Rademaker industrial powdered sugar duster with stainless steel conveyor, suitable for the automatic and even application of powdered/icing sugar onto bakery products. The machine is manufactured entirely in stainless steel and is equipped with an integrated wire-mesh conveyor and an independently driven spreading/brush system. The conveyor belt and spreading unit can be controlled separately. The machine can be used as a stand-alone unit or integrated into an existing bakery production line. Serial number: 7498-703 Year of build 2010 Stainless steel construction Integrated stainless steel wire-mesh conveyor Driven spreading/brush system Separate controls for conveyor and spreading brush Frequency-controlled drive Electrical control cabinets Mobile stainless steel frame Voltage: 230 V Connection: 1 Phase + N + PE Frequency: 50 Hz Current: 3 A Weight: 175 kg CE marked Hfjdpfsz Ha N Hex Ah Usn

Condition: used, functionality: fully functional, Dubus multi-spindle drilling machine. Hfjdpfx Ajz Irn Rjh Uen Full specifications coming soon.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, workpiece height (max.): 60 mm, roll diameter: 830 mm, On-site inspections while the machines are running are possible in Lithuania! Fully automatic edge banding line with the following machines: HOMAG PROFI KAL330/9/A3/WZ (year of manufacture 2013) HOMAG PROFI KAL370/8/A3/WZ (year of manufacture 2016) HOMAG PROFI TBL100/20/30/F infeed table (year of manufacture 2013) HOMAG POWER TWL410/25/LQ transfer system cross conveyor (year of manufacture 2016) TECHNICAL DETAILS HOMAG PROFI KAL330/9/A3/WZ & PROFI KAL370/8/A3/WZ edge banding machines Workpiece width without edge at a workpiece thickness of 12–22 mm: min. 60 mm (depending on the workpiece length) Workpiece width without edge at a workpiece thickness of 23–60 mm: min. 100 mm (depending on the workpiece length) Workpiece overhang: 30 mm Workpiece thickness: 12–60 mm Edge height: max. workpiece thickness + 4 mm Edge material on a roll: 0.3–3 mm Edge material height PVC: max. 135 mm Edge material height veneer: max. 100 mm Roll diameter: max. 830 mm HOMAG PROFI TBL100/20/30/F infeed table Roller diameter: 54 mm Roller spacing: approx. 60 mm Panel length: 240–2,500 mm Panel width: 120–3,000 mm HOMAG POWER TWL410/25/LQ transfer system cross conveyor Roller diameter: 64 mm Roller spacing: 110 mm Panel length: 240–2,500 mm Panel width: min. 240 mm Panel thickness: 8–60 mm Panel weight: max. 80 kg EQUIPMENT Clearance-type joining-cutting unit on both edge banding machines A3 basic gluing unit on both edge banding machines Clearance-type processing units on both edge banding machines FA11 finishing unit on the HOMAG PROFI KAL330 FA21 finishing unit on the HOMAG PROFI KAL370 Hfsdpfx Asz A Tx Tjh Usn Fixed stop on the left side of the infeed table Transport rollers on the infeed table Side conveyor belt on the infeed table Electropneumatically controlled cross guard on the infeed table Manually adjustable infeed guard Set of small parts Integrated air cushion table Fixed stop on the left side in the infeed and outfeed of the transfer system cross conveyor Infeed roller track with conveyor belt and cross transport Controlled cross conveyor in the infeed Outfeed roller track Controlled cross conveyor in the outfeed Electropneumatically controlled stop guard Side transport belt Manually adjustable panel overhang

Condition: used, Through-feed drilling machine with automatic workpiece transport for through-feed processing. Left machine side fixed, right side adjustable over the entire machine length. Price €3,900 in untested condition as is, loaded free on truck. >> The MERCEDES among drilling automats with the highest quality, Made in Swabia. Hsdpfeqy D T Tsx Ah Ujfn

Condition: used, functionality: fully functional, The complete specifications will be available soon. Hodpfx Asz Irlcoh Usfn