Used Fabrik for sale (61)

Year of construction: 2006, condition: ready for operation (used), Panel type: Tubular panels for 3-layer parquet, panel length: 2230mm, panel width: 782mm, panel thickness: 9mm-22mm, panel thickness tolerance: 0.5mm/panel, feed rate: 15m-50m/min, output: 12 cycles/min, working height: 1015mm, max. saw blade diameter: 250mm. Extraction included. Documentation available. On-site inspection is possible. Bcedpfx Afet Amc Iehsu

Condition: ready for operation (used), Year of construction: 2014, Volume flow: 6300Bm³/h, total pressure difference: 40mbar, motor power: 11kW, speed: 3000rpm, machine weight: 400kg. Components: Dust extraction, water vacuum filter, separator. Including pH value dosing. Documentation available. On-site inspection is possible. Expected to be available from April 2025. Bcedpfx Ajvzbhajfheu

Year of construction: 2022, condition: like new (used), Coolant system / belt filter system 980L Manufacturer: Bürener Maschinenfabrik Condition: new Equipment: 80 bar high-pressure pump + 2 additional pumps for chip flushing, frequency control for high-pressure pump to adjust the pressure, double switchover filter for fine filtration Bsdpfx Afev Hbv Uehjcu

Year of construction: 2021, condition: like new (used), Coolant system / belt filter system 980L Manufacturer: Bürener Maschinenfabrik Bcodpfxsv Hcyne Afhsu Condition: new Equipment: 40 bar high-pressure pump + 2 additional pumps for chip flushing, double changeover filter for fine filtration

Condition: good (used), Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3793000, Please tell us your offer price. Bcedpfovbgccex Afhsu Sale only within the European Union (EU), including Switzerland, Turkey, and Great Britain ----- Scope of delivery: Machine, loading system, conveyor belt, workpiece carrier Machine technical data: 5-axis grinding center including oval feed belt and loading portal 12-station tool changer with HSK 63 Max. travel X-axis 500 mm Max. travel Y-axis 650 mm Max. travel Z-axis 650 mm Table size 500 x 650 mm Cut-off detection Nordmann dressing spindle Oil supply via central factory supply Without packaging; any warranty is excluded. If you wish to disassemble the system yourself, please provide appropriate information in your bid. We assume no liability for the accuracy of the technical specifications, the completeness of accessories and tools, or compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Year of construction: 1979, operating hours: 216 h, condition: reconditioned (used), functionality: fully functional, Twin-screw extruder, parallel Manufacturer: Hans Weber Maschinenfabrik GmbH Type: DS 85 Year of manufacture: 1979/2022 Machine no.: 85-399 Screw geometry: for PVC-hard profiles Screw diameter: 2 x 85 mm Screw length: 17 x D Screw speed: max. 30 rpm Screw torque: 10000 Nm Motor power: 3.3 - 25.0 kW Drive motor: commutator motor Elektra Faurndau Cylinder heating/cooling zones: 4/2 (air cooling with fan) Tool heating zones: 8 Temperature control: 12 x digital temperature controllers (PMA KS40) Accessories: Melt pressure sensor and melt temperature sensor Connected load: approx. 60 kW (without tool) Extrusion height: 1100 mm Output capacity: approx. 150 - 180 kg/h for PVC-hard profiles Bodpfsxlcfkex Afhjcu Accessories: Material hopper and connection flange Accessories: Vacuum pump (1.1 kW) incl. material separator Dimensions: 4500 x 1200 x 2100 mm (LxWxH), incl. material hopper Weight: approx. 4000 kg Note: The electrical control cabinet was completely renewed approx. 3 years ago. Since then, the extruder has only been in operation for 216 hours. Condition: The extruder was repainted (light gray, RAL 7035) and checked for function.

Year of construction: 2009, condition: used, For sale are 7 centrifugal pumps from Pumpenfabrik Wangen from 2009, model ESP. Three of the seven centrifugal pumps have a motor. Data on the pump: Number of pieces: 7 / 3 with motor Length: 226cm (with motor) height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No: 920615 Bedpsga Dtyefx Afhscu Year of construction: 2009 connections: DN100 PN16 Motor data: Motor: SEW Eurodrive Type: RF77DV100L4/TF No.: 01.1280626601.0014.09 r/min: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6,30

Year of construction: 2009, condition: used, For sale are 8 centrifugal pumps from Pumpenfabrik Wangen from 2009, model ESP. Five of the eight centrifugal pumps have a motor. Number of pieces: 5 / 3 with motor Length: 172cm (without motor) / 229cm (with motor) Height: 34cm Manufacturer: Pumpenfabrik Wangen Type: ESP No.: 920607 Year of construction: 2009 Connections: DN100 PN16 Motor: SEW Eurodrive Type: RF77DV100L4/TF Bcsdpfx Afsga Dtcjheu No.: 01.1280626601.0003.09 r/min: 1400/48 kW: 3/S1 V: 230/400 A: 11 / 6,30

Condition: used, Year of construction: 2004, functionality: fully functional, pressing force: 40 t, installation height: 200 mm, stroke length: 200 mm, table width: 1,300 mm, table length: 1,500 mm, Technical data: Bcjdpfsvzwxujx Afhou Total pressure output 400 kN Total pressing area 1300 x 1500 mm Total pressing table 1300 x 1580 mm Spec. pressure at full design 2.1 daN/cm² (kp/cm²) 4 cylinders 60 mm diameter 200 mm stroke Operating pressure 350 bar Height of the pressing chamber 200 mm Loading width 1600 mm Steel plates Roller bars arranged to the right and left of the lower heating plate for moving the press package in and out. Roller bars can be raised and lowered pneumatically by the operator, can only be activated at the bottom dead center of the pressing table. Max. load 500 kg.

Condition: reconditioned (used), Horizontal Press Baler DIXI 60 SLD Year of manufacture: 2014 Semi-automatic 60-ton baling system for economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard boxes Tetra packaging Foils PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4150 (5080) x 1725 x 2035 Feed opening W x H (standard) mm: 990 x 1110 Machine weight approx. kg: 5420 Pressing force max. kN: 60 t / 600 kN Ironing cycle (average value) approx. s: 47 Bale size W x H x L approx. mm: 800 x 1100 x 1200 Bale weight (depending on material) approx. kg: 370-410 Binding: manual Number of bindings: 3, with wire with quick release eyelets Drive power: 7.5 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation. Bedpfx Afsnfux Ushecu

Condition: reconditioned (used), power: 11 kW (14.96 HP), operation weight: 8,000 kg, Horizontal baler DIXI 80 SLD 2018-2021 Year of construction Semi-automatic 80-tonne baling system for the economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard packaging Tetra packaging Films PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4,320 x 1830 x 2,154 mm Filling opening W x H (standard) mm: 1,040 x 1,110 mm Machine weight approx. kg: 8,000 Press force max. kN: 80 t / 800 kN Ironing cycle (average value) approx. s: 35 Bjdpfx Aoqa Dq Djfhscu Bale size W x H x L approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Binding: manual Number of bindings: 4, with wire with Quicklink wire Drive power: 11 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation. The operating instructions are available and are supplied as a PDF file and in paper form.

Condition: like new (used), Year of construction: 2013, Grafisk Maskinfabrik Rewinder/Slitter Bjdpfx Afoipvhnshecu

Condition: new, functionality: fully functional, Equipment: CE marking, SRB - Vranje Construction Project specializes in the production of complete pelletizing equipment with capacities from 500 kg/h up to 6 t/h. We manufacture the following: Boilers Dryers Bedpoxqd T Hefx Afhjcu Silos Mixer with conditioner Mill Pellet cooler Presses Conveyor belts Mixers Dedusting systems Crushers All our equipment comes with a 1-year warranty. 24h service support We offer the following services: Equipment installation Diagnostics Servicing Line maintenance Staff training Commissioning All inquiries and requests can be sent by email or by phone on working days from 09:00 to 17:00.

Condition: excellent (used), Roller bearings, ball bearings, barrel bearings, bearings, rolling bearings Bedjb A Ipzjpfx Afhocu -Outer diameter: 210 mm -Width: 53 mm -Inner diameter: 140 mm -Weight 6.3 kg

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 20,000 l, diesel filling station 20000 litre with pump Bjdsi Artlopfx Afhocu

Condition: new, Year of construction: 2026, functionality: fully functional, tank capacity: 1,00,000 l, storage tank 100.000 litre volume for heating oil, diesel or HVO Bcjdoi A Hx Ispfx Afhou

Condition: new, functionality: fully functional, Year of construction: 2025, operating hours: 1 h, load capacity: 1,500 kg, fuel type: electric, fork length: 1,150 mm, empty load weight: 145 kg, total length: 380 mm, drive type: Elektro, construction width: 540 mm, Low-lift pallet truck Load centre: 600 mm Condition: New machine Technical condition: New Front tyre type: Vulkollan Front tyre condition: New Rear tyre type: Vulkollan Rear tyre condition: New Bcsdpfoyb Upnjx Afheu Battery voltage: 24V Battery capacity: 40Ah Battery year: 2025 Battery condition: New Description: New machine – inspected according to FEM 4.004 (UVV). NEW – checked. Pulse control

Condition: used, Year of construction: 2025, empty load weight: 862 kg, total length: 1,030 mm, construction height: 630 mm, construction width: 530 mm, Traction Battery Battery Voltage: 48V Battery Capacity: 625Ah Battery Manufacturer: Exide Battery Type: PzS Battery Year: 2025 Battery Condition: New Description: - Trade-in of old batteries possible - Free delivery within Germany (excluding islands) - OEM quality including Aquamatik (battery filling system) - Additional batteries available upon request Traction battery for electric forklift, brand new, year of manufacture: 2024 Type: 5 PzS 625 Internal ID: 2100-22020 Suitable for e.g. STILL RX20-14, RX20-15, RX20-16, RX20-18, RX20-20 Year: 2024, BRAND NEW Includes Aquamatik and EURO plug 160A Available for immediate delivery Dimensions: Length: 1030mm Width: 530mm Height: 630mm Weight: approx. 862 kg Bcjdpfx Afexmlvbohou Further traction batteries available at short notice. If you have any questions, please feel free to contact us at any time. We look forward to hearing from you. Sale is exclusively to commercial customers. Subject to prior sale and rental. Our General Terms and Conditions apply. The listed price is net, plus statutory VAT ex stock Bremen. Rental – including long-term rental – is available on favorable terms! Contact us for details. The listed price includes 19% VAT. Subject to prior sale and rental. Our General Terms and Conditions apply.

Condition: new, spherical roller bearing -Type: 22218 E -Weight: 3.5 kg -Outer diameter: 160 mm -Width: 40 mm -Inner diameter: 90 mm Bcedpfx Aeb A Iq Rofhou

Condition: excellent (used), P/N: 190.101 // Fabrik No.: 616 Bodpognlb Asfx Afhjcu Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: used, Year of construction: 2007, Knipbank knipschaar plaatschaar Type: Hydraulisch Fabrikant: Jean Perrot Type: CSE 3G 6006 Bouwjaar: 2007 CNC: SEW DOP11A Knipbreedte: 6050mm Knipdikte: 6mm Elektrische achteraanslag Motorvermogen: 15kW Machine-afmetingen voor transport: 7400x2450x2250mm Machine-gewicht: 19000kg Bedowng Rrspfx Afhjcu - Year: 2007 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), total width: 2,011 mm, NIKON-Metris X: 1000 – Y: 2500 – Z: 800 mm Het LK V-SL- model beschikt over een revolutionair ontwerp dat de beste scan- en inspectieprestaties levert van alle werkende CMM#39;s op de markt. De multisensor LK V-SL coördinatenmeetmachine onderscheidt zich door zijn unieke karakter en voldoet aan de eisen van de automobiel- en lucht- en ruimtevaartindustrie. Dankzij de mogelijkheid om zeer nauwkeurige metingen uit te voeren (HA – High Accuracy), versterkt dit systeem als referentie-CMM voor metrologielaboratoria en biedt het een submicronnauwkeurigheid voor toepassingen die de hoogste meetnauwkeurigheid ingewikkeld. Laatste kalibratie: 19-09-2024 Renishaw-besturingssysteem: -Probekopcontroller: PHC 10-2 -Interfaceselector 191-2 -Probe-interface PI 200 -TP 200 Renishaw-meettaster Laserbesturingssysteem. LC60DX De LC60Dx is ontworpen voor 3D-laserscanning met hoge snelheid en een gemiddeld bereik op coördinatenmeetmachines (CMM#39;s). Het apparaat biedt uitstekende prestaties bij het scannen van grote onderdelen, zoals mallen, autopanelen of structurele componenten, met een nauwkeurigheid tot 9 micron. Renishaw PH10M - Gemotoriseerde indexerende meetkop Rotatie-assen: A-as: ±180° B-as: 0–115° Indexeringsstap: 7,5° → wat een totaal van 720 positieve positieve positieve resultaten oplevert Interface: Autojoint/M8-aansluiting (compatibel met modulaire testsystemen zoals Renishaw TP200, SP25M of Nikon/Metris laserscanners) Maximaal stylusgewicht: ca. 300gr Maximale styluslengte: tot 300 mm Positie herhaalbaarheid: ±0,4 µm (0,0004 mm) Toepassingen: Meting van onderdelen met complexe vormen (turbinebladen, mallen, behuizingen, enz.) Wordt gebruikt in combinatie met probes zoals Renishaw SP25M, TP200 of Nikon/Metris LC15Dx Compatibel met de meeste CMM-merken (DEA, Hexagon, Mitutoyo, Wenzel, LK, etc.) SCHUNK - snelwissel-klemsysteem voor gebruik op CNC-machines. Het is bedoeld voor het vastzetten van pallets, het opspannen van werkstukken op de machinetafel met een zeer hoge positioneringsnauwkeurigheid (tot 0,005 mm). Fabrikant: SCHUNK (Duitsland) Model: VERO-S NSE plus 90 Type: Snelwisselklemmodule Modulediameter: 90 mm Bedrijfsdruk: 6 bar Klemkracht: tot 25.000 N (25 kN) Materiaal: gehard roestvrij staal Bediening: Pneumatische bediening met mechanische zelfvergrendeling Positioneringsnauwkeurigheid: ≤ 0,005 mm Bcodpfx Asxl Hxusfhou