Used Face Plates for sale (12,018)

Condition: good (used), Year of construction: 1975, working width: 3,700 mm, cutting angle (min.): 2 °, sheet thickness steel (max.): 16 mm, sheet thickness stainless steel (max.): 12 mm, back gauge: 1,000 mm, oil tank capacity: 500 l, overall weight: 18,400 kg, total length: 4,500 mm, Equipment: documentation/manual, finger protection, For sale: 1 used hydraulic guillotine shear Manufacturer: Darley Model: GS3660x16 Year of manufacture: 1975 Technical Data: Distance between uprights: 3860 mm Cutting angle: 2° Hold-downs: 18 pcs. Oil capacity: approx. 500 l Total power requirement: 22 kW Weight: 18,400 kg Back gauge: 1,000 mm Equipment: - electric back gauge - cutting line illumination - front finger guard Ljdpfx Aoxfkr Sebcshd - ball rollers on the support table - side gauge - support arms - movable foot switch - operating manual

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning diameter: 1,600 mm, turning length: 3,500 mm, center height: 800 mm, spindle bore: 100 mm, faceplate diameter: 1,250 mm, Equipment: documentation/manual, For sale: 1 used facing and center lathe Manufacturer: Werkzeugmaschinenfabrik Zerbst GmbH Model: DP1 / S3 x 3500 Year of manufacture: 1994 Technical data: Maximum turning diameter over bed: 1,600 mm Distance between centers: 3,500 mm Spindle bore: 100 mm Face plate diameter: 1,250 mm Total machine weight: approx. 24.8 t Includes documentation. Additional pictures and videos can be provided upon request. The following work has been performed on the machine over the past four years: - Tailstock completely overhauled at the end of 2022. New bearings, new center, and lubrication. - Cross slide refurbished in 2024. Lhsdpfoyvt H Aex Abcjd - Gibs reconditioned with new slideways; scuff marks on guideways smoothed by scraping. - Spindle bearing seats eased, gibs scraped on contact and slideway surfaces. - Lubrication pump cleaned and repaired, lubrication system made fully functional, some metering valves replaced, and new guideway wipers fabricated. The machine can be inspected at our warehouse in 09599 Freiberg by arrangement.

Year of construction: 1979, condition: good (used), For sale comes: 1 piece used head lathe Manufacturer: WMW Niles Type: DP1/S2 BJ: 1979 Face plate diameter: 1.250mm Center height above foundation plate: 1.250mm Mass: 19t Connected load: 55Kw Max. Torque at the face plate: 31.500Nm Maximum workpiece mass between centers: 16.000Kg Speed range: 2,24 - 224rpm Documentation available incl. clamping plate 2.600 x 2.000mm Ljdpfjnl D U Sox Abcehd Free location Saxony

Condition: good (used), Year of construction: 1968, functionality: unexamined, turning diameter: 1,500 mm, For sale: Lsdpfx Abjr Nzm Tjcehd 1 used head lathe / facing lathe Manufacturer: Heyligenstaedt GmbH Werkzeugmaschinenfabrik type: 505ev/500 YEAR OF MANUFACTURE: 1968 Diameter face plate: 1.500mm incl. documentation The machine can be inspected in our warehouse in 09599 Freiberg.

Condition: new, Year of construction: 2024, neu 2024 9740 prompt, Zwischenverkauf v Türkei 6200 € 119.66 € 1 1050 mm 3 mm 90 mm 6 m/min 1.1 kW Lhodpfxswiqnws Abced 1630 mm 700 mm 1200 mm 480 kg 3 rolls asymmetric rolls - prebending 2 rolls driven by brakemotor lateral roll adjustable by handwheel longitudinal grooves in lower and lateral roll tiltable upper roll right / left rotation with double foot switch conical rolling device user manual in GERMAN

Condition: new, Year of construction: 2024, neu 2024 9738 prompt, Zwischenverkauf v Türkei 20300 € Lhsdpfowirulex Abcjd 389.76 € 1 1530 mm 6 mm 6 mm 4 mm 150 mm 4 kW 3100 mm 1120 mm 1020 mm 2100 kg 3 rolls Asymmetrical rolls arrangement - with pre-bending 2 driven rolls Motorized adjustment of lateral and clamping roll Digital read-out for lateral and clamping roll Swiveling top roll to the front Forward/reverse run Hardened rolls Moveable control panel User manual in GERMAN and ENGLISH (sample photo)

Condition: excellent (used), For sale: professional granite surface plate (marking-out plate) used in quality control and tool rooms. The plate is made of high-quality technical granite, ensuring excellent dimensional stability and wear resistance. Ideal for precise measurements, marking out, and component inspection. The unit is mounted on a robust steel stand. Lhedpfx Abeyuqtpsced The equipment comes from an industrial facility. ⸻ Technical specifications • Type: surface plate / marking-out plate • Material: technical granite • Plate dimensions: approx. 1600 × 1000 mm • Thickness: approx. 200 mm • Weight: approx. 1014 kg • Base: steel construction The plate has a Trescal calibration sticker. ⸻ Applications • quality control • tool rooms • CNC industry • precision measurements • marking out components

Condition: used, functionality: fully functional, Year of construction: 2008, control type: manual, degree of automation: manual, actuation type: hydraulic, number of rollers: 3, roller (top) diameter: 1,100 mm, side roll diameter: 980 mm, roller diameter: 1,430 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 4,160 mm, sheet thickness (max.): 200 mm, sheet thickness steel (max.): 200 mm, overall weight: 2,25,000 kg, total length: 9,000 mm, total width: 5,580 mm, total height: 6,100 mm, power: 220 kW (299.12 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG3200 3 roll capacity 3100x200 mm year of make 2008 Capacity : Plate width mm. 3000 Rolling thickness mm. 200 Lodpfx Abjyvgauecshd Pre-bend thickness mm. 160 -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Planetary design with pre-pinch fully hydraulic Rolls surface length mm. 3100 Top roll mm. 1100 Side rolls mm. 980 Electric power on hydraulic unit Hp 220 + Hp 180 Voltage 400 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. -Digital position readout of the bending rolls. -Oil cooler automatic unit heat exchanger. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension 9000 x 5580 x H 6100 mm -Weight approx. 225 Ton.

Condition: good (used), Panel size: 1500 x 4000 mm panel height: 370 mm Thickness of the top plate: 50 mm Lhsdpfedzln Uex Abcsd Working height when assembled: 870 mm Weight: 6,8 t

Condition: good (used), Length: 1000 mm Width: 600 mm Plate height including ribbing: 135 mm Lsdpfx Absf D Sp Sjcohd Plate edge height: 35 mm Weight: 152 kg

Year of construction: 1966, condition: used, machine/vehicle number: 4661, working width: 5050 mm metal sheet thickness: 10 mm power: 30 kW Lodpfx Ajb N Ercsbcehd space needed: 2450 x 5600 x 2500 mm weight: 28000 kg

Year of construction: 1987, condition: used, machine/vehicle number: 687 T, working width: 3050 mm metal sheet thickness: 6 mm throat: 200 mm Ledpfx Abob N Erbscohd rear stop: 1000 mm power: 15 kW space needed: 4100 x 2300 x 2100 mm weight: 8500 kg

Condition: used, working width: 1020 mm Ljdpfx Aeda I Itebcjhd metal sheet thickness: 1 mm upper roller-Ø: 55 mm below roller-Ø: 55 mm space needed: 1370 x 570 x 1100 mm

Condition: used, Aufspannplatte - Tisch einer Langhobelmaschine - Tischbreite/Aufspannbreite: 1845 Tischlaenge/Aufspannlaenge: 5505 mm 7 T-Nuten laengs fuer T-Nutensteine: M 30 T-Nutenabstaende zueinander: 263 mm Gesamtlaenge: 6230 mm Ljdpfxjbn Amfj Abcehd Plattenhoehe insgesamt: 350 mm Gewicht: 11 t

Condition: used, Width: 1545 mm Length: 3055 mm Height: 265 mm 4 T-slots lengthwise with slot width: 28 mm for T-slots: M 24 Lodpfxedfklls Abcohd 1 groove sideways with groove: 20 x 15 mm weight: approx. 3,5 t

Condition: used, width: 1005 mm length: 1600 mm plate thickness incl. ribbing: 150 mm Lhodsb Nxn Eepfx Abcjd thickness of upper plate: ca. 30 mm table height over base: 750/850 mm weight: ca. 700 kg weight of adjusting feet: ca. 200 kg

Condition: used, plate size: 500 x 1000 mm plate thickness incl. ribbing: 80 mm Lhjdpfxob T R Dus Abced plate thickness of upper plate: 30 mm weight: ca. 170 kg

Year of construction: 1965, condition: used, machine/vehicle number: 4447, working width: 2500 mm metal sheet thickness: 4 mm throat: 70 mm rear stop: 520 mm Lhjdpeb H Ibujfx Abcjd power: 380 V, 6,3 kW space needed: 3200 x 2300 x 1270 mm weight: 4600 kg

Condition: used, table size: 700 x 700 mm plate thickness incl. ribbing: 110 mm thickness of upper plate: 50 mm table height over base: 780 mm weight: 250 kg Ledpfxsb Nxnys Abcohd

Condition: used, plate size: 800 x 2000 mm plate thickness incl. ribbing: 80 mm Lhodpfob T R Dyex Abcsd plate thickness of upper plate: 30 mm weight: ca. 400 kg

Condition: good (used), plate size: 3000 x 1500 mm Lhsdpfx Abedm Dw Docsd plate thickness incl. ribbing: 300 mm weight: 3000 kg

Condition: used, plate size: 755 x 373 mm plate thickness: 115 mm Ljdpfx Aeb Npd Usbcjhd

Condition: not inspected (used), Panel size: 1000 x 1000 mm panel thickness: 160 mm 8 T-slots for sliding blocks: M 20 Ledpsd Aufrjfx Abcehd Distance between the T-slots: 125 mm Weight: 660 kg

Condition: ready for operation (used), Plate size: 170 x 480 mm plate height: 95 mm changing pole spacing: 12,5/25 mm Lhedpfx Absd Ef S Esced electr. connection: direct current 110 V

Condition: excellent (used), Table surface: 1610 x 970 mm Lhodsd Eznqepfx Abcod table top thickness: 90 mm on base frame, total height: 860 mm Weight: 960 kg