Used Facing Lathe for sale (6,042)

Condition: excellent (used), Year of construction: 2013, operating hours: 4,300 h, functionality: fully functional, machine/vehicle number: NL 254131163, CNC controller M730BM with MAPS IV Capacity X-axis travel mm: 250 Y-axis travel mm: +/- 50 Z-axis travel: mm 795 Turning length mm: 705 Max. turning diameter mm: ø 366 Swing over bad mm: ø 920 Swing over cross-side mm: 742 Bar work capacity mm: 80 Upper turret Pgsdpfx Aast Akire Djg Number of tool slots St: 12 Speed driven tools RPM: 10.000 Drive power driven tools kW: 5,5 / 3,7 (3 mm / cont) Main spindle Speed spindle rpm: 4,000 Drive power spindle kW: 18.5 / 15 (50% ed / cont) Chuck type: BB210 Manufacturer: KITAGAWA Spindle nose: JIS A2-8 Tailstock Tailstocktravel mm: 734 Holder: MT5 equipment Chip conveyor Tool measuring arm Foot switch for chuck or collet system Interface for bar feeder

Condition: used, Year of construction: 1994, turning diameter 570 mm turning length 2000 mm control Sinumerik 805 Siemens Pgodpfx Asu Sbkgoa Dsg swing diameter over face slide 365 mm main spindle speeds: 3-2.500 U/min drive of main spindle 15/19 kW spindle bore 62 mm spindle head DIN 55027 No.8 tailstock taper MT 5 quill stroke 190 mm pinole diameter 80 mm feed range - long. and cross 0,01-50 mm/u total power requirement 50 KVA weight of the machine ca. 5 t dimensions of the machine ca. m

Condition: used, Year of construction: 1981, faceplate diameter 3200 mm swing diameter 5100 mm turning height 2505 mm cross rail - adjustment 1500 mm max. ram stroke 1250 mm slide adjustment 2000 mm control Siemens 8 T tool changer 16 STK table load 60 t faceplate turning speed range -stepless- 0,8-100 U/min feed 0,0 mm/min rapid traverse 6000 mm/min drive of main spindle 75 kW weight of the machine ca. 70 t Pjdpfsu Sbdgsx Aa Djgg dimensions of the machine ca. 9,3 x 6,1 x 6,0 m machine is in an excellent condition!! with div. acessories (photos available) machine can be equipped with latest electrics and Siemens CNC control SINUMERIK 840D sl for additional costs.

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Storage location: Nattheim Psdsvvkt Iopfx Aa Dsgg

Condition: good (used), Year of construction: 2005, turning length: 450 mm, travel distance X-axis: 135 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 450 mm, C-Axis rapid traverve 400 Min Turret indecing time 0,2 sec for 1 station Heavy duty cutting (depth cut 6mm) 162.7 mL/Min Pjdpeydcvzsfx Aa Dogg LNS Bar feeder new 2017 Large package tooling driven / live tools 8 axis controlled with 2 spindles and turrets Max. turning Ø: 250mm X-Axis: 135mm Y-Axis: 40+40 = 80mm Z-Axis: 450mm B Axis: 510° Spindle bore: 49mm Speedrange: 6000Rpm Spindle power: 30kW Subspindle speeds: 6000Rpm Subspindle bore: 49mm ATC / revolver: 12 Speed live tools: 6000Rpm Positions lower revolver:12 Speed live tools: 6000Rpm Length: 2800mm Width: 2000mm Height: 2000mm Weight: 5000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), In good technical condition and fully operational. Year of manufacture: 1974, with an overhaul including comprehensive modernization (retrofit) of the CNC control system, complete with automatic central lubrication for the axes and hydraulic systems, water cooling, conductive rollers with brushes for a system allowing the possible welding of the workpiece, and complete protection against flying chips. Heidenhain manual plus 4110 control system. Swing diameter over bed: 1,250 mm and over support: 900 mm. Max. workpiece weight: 14,000 kg. Max. workpiece length: 3,000 mm. Machine weight: 16,350 kg. Machine power: 80 kW. Machine dimensions: Width 3,000 mm, Height 2,100 mm, Length 8,000 mm. Accessories: faceplate including handles, steady rest, raised tool head, universal chuck. Pjdpfxox Ttlas Aa Degg Complete technical documentation, service history, and maintenance and overhaul records are available.

Condition: good (used), Lead and feed screw lathe Colchester Triumph 2000 Turning length: 750 mm Swing diameter over bed: 390 mm Swing diameter over cross slide: 240 mm Max. workpiece diameter in gap: 580 mm Gap length in front of faceplate: 155 mm Spindle bore: Ø 54 mm Spindle mount: 6" D1 Camlock Tailstock Morse Taper 4 Quill stroke: 155 mm 16 spindle speeds from 25 to 2000 rpm 39 metric thread pitches from 0.2-14 mm 45 Whitworth thread pitches from 2-72 t.p.i (Gg/") 18 module thread pitches from 0.3-3.5 module 21 diametral pitch thread pitches from 8-44 D.P. 15 longitudinal feeds from 0.04 - 1.0 mm/rev 15 cross feeds from 0.02 - 0.5 mm/rev Dimensions (LxWxH): 2000 x 980 x 1640 mm Weight: 1350 kg The machine and the bed are in good condition and run perfectly. Cross slide backlash 0.2 mm Top slide backlash 0.4 mm Accessories/Equipment: - Chuck guard - Machine light - Multifix B base holder Podpfjyb A Uxsx Aa Dogg - Bed stop - Three-jaw chuck D250 mm - Machine feet

Condition: excellent (used), Year of construction: 2014, CNC-swiss type automatic lathe brand: STAR type: SV-38R new in: 2014 equipped with: FANUC 31i control, turret with B, Y, X, and Z axis, driven tools, 2x C-axis, Y2 axis, Psdsvgulvjpfx Aa Dsgg subspindle, high pressure pump, oil mist, backworking, chip conveyor, parts conveyor, fire extinguishing system, useable for short and long parts automatic bar loader FMB TURBO 5-55

Condition: good (used), Year of construction: 2007, CNC Swiss Type Automatic Lathe Make: STAR Model: SR-32J Year of manufacture: 2007 Pjdpfx Aasycq Dde Dsgg Equipped with: FANUC 18i-TB control Synchronous spindle Driven tools C-axis Backworking Parts conveyor belt Oil mist extraction system Bar feeder: FMB TURBO

Condition: good (used), Year of construction: 2011, CNC Swiss-type automatic lathe Make: STAR Model: SR-32 J Type N Year of manufacture: 2011 Equipped with: FANUC 32i Model B control Synchronous spindle Live tooling C-axis Subsequent machining (backworking) High-pressure pump Chip conveyor Parts conveyor Oil mist extraction unit Pgodpfxsycqx Ie Aa Djg Bar feeder: FMB TURBO 3-36

Condition: used, Year of construction: 1975, turning diameter over bed 380 mm turning diameter over slide rest 215 mm turning length 1250 mm spindle bore 41 mm bed width 340 mm number of spindle speeds 12 spindle turning speed range 14-2800 U/min total power requirement 6 kW Pedpfx Aasycxf Ae Dsgg weight of the machine ca. 1,85 t dimensions of the machine ca. 3 x 1 x 1,35 m Special price sale directly from the factory! Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1991, functionality: fully functional, machine/vehicle number: 91-160-2498, Used WEILER PRAKTIKANT 160 lead and feed screw lathe Centre height: 160 mm Centre distance: 650 mm Pedpfx Asyciw Aoa Degg Spindle speeds approx. 48–2,500 rpm Spindle bore: 40.5 mm Leadscrew and feed shaft are covered. Scope of delivery: Including 3-axis digital readout from Heidenhain, chip guard back wall, lever collet system (without collets), 1 x faceplate Ø 250 mm, electrically interlocked chuck guard, machine lamp, Multifix size A quick-change toolpost with 4 holders, bed stop, cooling unit, and fixed steady rest. The machine is located at our premises in 71334 Waiblingen-Beinstein and is available immediately. Viewing by appointment is possible.

Condition: used, Year of construction: 1990, Numerous tool holders Power chuck 12-position turret Machine type: CNC lathe Year of manufacture: 1990 Control: Traub TX 8 F Turning diameter: 480 mm Turning length: 800 mm Spindle bore: 65 mm Spindle speed: 40 - 4000 rpm Weight: approx. 5000 kg Dimensions (W x D x H): approx. 2950 x 1990 x 2000 mm Pgodpsyc Hgbefx Aa Deg Condition: used

Condition: excellent (used), For sale: metal lathe from the English manufacturer Harrison, model m300, as shown in the photos. The machine is in very good condition. It is equipped with a new 160 mm chuck from Fuerda. Podpfxsx Ur Amj Aa Degg Sino brand optical scales have been installed. During test turning over 20 cm, a diameter variation of 0.04 mm was measured. Price is non-negotiable. Net price +23% VAT. Chuck: 160 mm Turning length: 600 mm Swing over cross slide: 220 mm Swing over bed: 320 mm Tailstock taper: MK3 Spindle bore: 38 mm

Condition: used, Year of construction: 2022, controller manufacturer: Siemens, controller model: SINUMERIK 828D, _____ Description: Year of manuf. : 2022 Control : Siemens SINUMERIK 828D Turning diam. : 288 mm Turning length : 243 mm Work area max. turning diameter:288mm max. machining length:243mm Pgjdpjyavz Aefx Aa Djg X-axis:175mm Z-axis:350mm Main spindle Chuck diameter:210mm Max. bar diameter:67mm Spindle bore diameter:76mm Drive power:10.5/20 kW max. torque:213 NM max. speed:4,500 rpm Tailstock Quill diameter:65mm Quill stroke:80mm Axial force:4,312 N Center point adapter:MT4 Tool turret Number of tool stations:12 Tool holder:BMT45 Powered tools:Yes Max. speed:5,000 rpm

Condition: excellent (used), turning diameter over bed 260 mm spindle passage 28 mm Psdpfx Ajycxk Ssa Degg turning length 300 mm centre height 130 mm turning speeds 125 - 2800 U/min total power requirement 3 kW weight of the machine ca. 0,8 t dimensions of the machine ca. 1,4 x 0,6 x 1,4 m

Condition: used, Year of construction: 2007, swing dia. 430 mm Distance between the spindles 1450 mm control MAZATROL 640T x-axis 310 mm z-axis 605 mm spindle tunring speed 4.000 U/min Pgjdpfsyb S Nrsx Aa Djg In our opinion, the machine is in good used condition and can be inspected under power by appointment. Technical Features & Accessories: - Gantry Loader Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: used, Year of construction: 2006, turning diameter 320 mm centre distance 1190 mm control MAZATROL 640T spindle tunring speed 5.000 U/min spindle bore 61 mm bar passage 51 mm Podpfx Aaeyb S Nls Dogg x-axis 240 mm y-axis 100 mm z-axis 495 mm In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Year of construction: 2000, condition: good (used), Parts shown by hand not included. Pgsdpfx Aspy Eqmoa Dog 1350 mm length, D 480 mm,

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, High-precision lathe DMG Mori Wasino G 100/480 Year of manufacture: 2017 Control: Fanuc COMPACT line Temperature response (at cold start): ø 2.0 μm Roundness: 0.5 μm Technical specifications: Spindle speed: Drive power: Turning diameter: 285 mm Turning length: 280 mm Bar capacity: 38 mm Travel paths: Pjdpfxjvi Ifze Aa Degg X-axis: 480 mm Z-axis: 285 mm Accessories - 3 live tools - Rigid tool holder package - Fire extinguishing system - Machine has only been run under oil - Chip conveyor

Year of construction: 1996, condition: used, Schütte SF 26S DNT YOM 1996 Number of spindles: 6 Max bar diameter [mm]: 26 Auto bar loader: Cucchi BLT Multi-6 - (YOM 2015) Cross slide pos. 1, 3, 4, 6 CN slide pos 2, 5 Spindle stop attachment for main spindles Pgodpji Hb Szofx Aa Dsg Bar feeding pos. 6 Pickup spindle pos. 6 High pressure coolant system Chip conveyor, hinged belt type Oil mist filter ISI RON/A 2500A, ID 26295

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 127690, turning length: 150 mm, turning diameter: 220 mm, Equipment: documentation/manual, rotational speed infinitely variable, Machine regularly serviced, in excellent condition. If interested, we have two more identical machines available. Pgjdpfoxr Tzcsx Aa Dog

Condition: good (used), Year of construction: 2009, functionality: fully functional, Manufacturer: Gildemeister Model: CTX 410 V4 Year of manufacture: 2009 Control: Heidenhain plus IT Travel: X 170 mm, Z 635 mm, Y +/-40 mm Program run time: 11,400 h Spindle Spindle speed: 5,000 rpm Podpeyax Swsfx Aa Dsgg Spindle bore: 65 mm Turning diameter over cross slide: 375 mm Turning length: 635 mm Turret Tool holder: VDI30 Number of stations: 12 with AGW Dimensions and weight Dimensions: 5,000 mm x 2,500 mm x 2,800 mm Weight: approx. 5,800 kg

Condition: good (used), Year of construction: 2014, operating hours: 8,500 h, functionality: fully functional, turning diameter over cross slide: 800 mm, turning length: 900 mm, turning diameter: 500 mm, spindle bore: 77 mm, spindle speed (max.): 3,200 rpm, Spinner TC 800-77 MCY Year of manufacture: 2014 Maximum turning diameter: 500 mm Maximum turning length: 900 mm Control: Fanuc 31i Maximum swing diameter: 800 mm Main spindle: Maximum speed: 3,200 rpm Drive power (main spindle): 24 / 33 kW Maximum torque: 630 Nm Chuck diameter: 250 mm Spindle nose: A8 Bar capacity: 77 mm Travel distances: X-axis: 360 mm Y-axis: 120 mm (-55/+65) Z-axis: 900 mm Psdpfx Aasyax Hbs Degg C-axis: 360° Tool turret: Tool stations: 12 positions Driven stations: 12 positions Tool holder: VDI 50 Speed range (driven tool stations): max. 4,000 rpm Drive power (driven tool stations): 5 / 9.6 kW Torque: 18 / 35 Nm Feeds: Rapid traverse X: 15 m/min / Z: 24 m/min Total power requirement: - kW Machine weight approx.: 7.5 t Space requirement approx.: 4.3 x 3.0 x 2.2 m Control ON hours: 44,700 Operating hours: 8,518 Machining hours: 6,631

Condition: used, Year of construction: 2005, turning diameter 290 mm turning length 300 mm control Heidenhain greates pass round over bed 380 mm total power requirement --- kW weight of the machine ca. --- t dimensions of the machine ca. --- m Podsyb S Ihepfx Aa Dsgg