Used Fanuc Tape Drill Mate Model T for sale (799)

Condition: used, Year of construction: 2019, operating hours: 12,300 h, functionality: fully functional, machine/vehicle number: Fanuc RoboDrill B, nominal power (apparent): 11 kVA, overall weight: 2,300 kg, spindle speed (max.): 10,000 rpm, number of slots in tool magazine: 21, input voltage: 200 V, type of input current: three-phase, FANUC Robodrill α-D21iB5 Vertical Machining Centre, year of manufacture 07/2019. Commissioned in 2021. Total operating hours: 16,000 h, machining hours: 12,300 h. Used exclusively in our company since new. The milling machine is equipped with a 4th axis DDR-t rotary table featuring two independent Schunk pneumatic vices, a tool probe and a Renishaw workpiece probe, chip flushing system, automatic front doors, oil mist extractor, chip conveyor, and a high-capacity coolant tank. The machine is in continuous operation. Inspection under power possible. Condition: very good. Type: FANUC ROBODRILL α-D21iB5 Serial number: A04B-01213B#B Year of manufacture: 2019-07 Gtjdpfex Rqfrex Ah Hst Weight: 2,300 kg (machine only) Power supply: 3~ Rated power: 11 kVA Supply voltage: 200–220 V Frequency: 50/60 Hz EMC standard: EN55011 EMC group: 1 EMC class: A SCCr (Short-circuit current rating): 2.5 kA If you have any questions or require further information, please send us a message or contact us by phone.

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 700/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 850 x 410 [mm] Godpfjx Tvizox Ah Hott - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 2165 X 2087 [mm] - Machine height : 2345 [mm] - Machine weight : 2000 [kg] MACHINE HOURS - Number of working hours : 3207 [h] EQUIPMENT - CNC : Fanuc 31i model B5 - 3 colors status lamp DIVIDING UNIT * manufacturer : Häberle * model : DTTiB * travel 4th axis : 360 [°] * indexing precision 4th axis : 0.001 [°] * travel 5th axis : -7/+100 [°] * indexing precision 5th axis : 0.001 [°] * tightening type : Pneumatique - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : Renishaw - Workpiece probe : Renishaw - Electric transformer - Milling vice - Tool-holders

Condition: ready for operation (used), Year of construction: 2004, operating hours: 23,500 h, Control Unit Brand FANUC Model Series 16i-MB Main Drive Tool taper BT30 Number of axis 4 Turret Number of turrets 1 Godpfx Asx D Rxish Hett Tools Number of index 14 This 4-axis FANUC Robodrill Alpha-T14 iD was manufactured in 2004. It features a BT30 spindle taper, a 14-tool turret, and a table size of 750 x 380 mm. Equipped with a Fanuc series 16i-MB control system and a 4th axis by Yukiwa. Running time stands at 23,500 hours. If you are looking to get high-quality milling capabilities consider the FANUC Robodrill Alpha-T14 iD machine we have for sale. Contact us for more information. Application Types Milling

Condition: excellent (used), Year of construction: 2015, operating hours: 4,500 h, functionality: fully functional, travel distance X-axis: 700 mm, rapid traverse X-axis: 60 m/min, rapid traverse Y-axis: 60 m/min, rapid traverse Z-axis: 60 m/min, controller manufacturer: fanuc, controller model: 31i model B5, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,500 h, spindle nose: BT 30 big plus, number of slots in tool magazine: 21, input voltage: 400 V, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, FULL OPTIONAL TAPPING CENTER high torque/power version, complete with: spindle cone with BIG PLUS attachment Gtedpfeuby Sxox Ah Hst FANUC DDR-T: continuous fourth axis (direct drive motor) with braked counter support and plate rotary joint for hydraulic feed to center table (for automatic workpiece clamping/unclamping) hydraulic power unit for workpiece clamping high-pressure refrigeration through the spindle chip conveyor evacuation automatic side poet robot interface tool setter RENISHAW TS-27 perfect machine with only 4,500 spindle hours!

Condition: excellent (used), Year of construction: 1997, BAZ Fanuc Robodrill14 i XYZ: 500/380/300 8000 rpm Fanuc 16 M Accessories: 3 x face mill holders 4 x drill chucks 1 x MK2 holder 3 x collet holders 2 x 10 mm Weldon 3 x 6 mm Weldon 1 x CNC rotary table Fibro 150 Gsdsx Ncv Tepfx Ah Hett Documentation

Condition: like new (used), Year of construction: 2017, operating hours: 3,800 h, functionality: fully functional, Controller FANUC 31i Model B5 Table size 850 x 410 mm Max. table load 300 kgs X travel 700 mm Y travel 400 mm Z travel 330 mm A axis C axis 0 - 360 degree Distance between table surface and spindle end 250 - 580 mm Max. tool length 250 mm Max. tool diameter D80 mm Max spindle speed 24000 rpm Rapid speed X/Y/Z 54 m/min Feedrate 30 m/min ATC magazin 21-fold Tool holder type BBT30 Weight 2300 kgs Accessories, featureies - 4/5 axis with round table - RENISHAW TS27 tool presetter system - RENISHAW OMP60 zero point setting system - Chip conveyor - Coolant unit Gjdpfxjxtwxhj Ah Hett - Manuals The machine has been used little and the condition is like new. Ready to buy.

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: P082WG406, travel distance X-axis: 500 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel distances X-axis: 500 mm Y-axis: 400 mm Z-axis: 330 mm Gtedpfxexxvi As Ah Hjt Spindle speed: max. 10,000 rpm Rapid traverse (axes): max. 54 m/min Table & Loads Permissible table load: 300 kg Maximum tool weight: max. 2 kg Maximum total tool weight: max. 23 kg Tool dimensions Overall length: 200 mm Shank length: 120 mm Tool diameter: 80 mm Maximum height: 440 mm MACHINE DETAILS Weight: 2,100 kg Mains supply: 3-phase Power rating: 11 kVA

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 24.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 26996 [h] - Number of working hours : 3690 [h] EQUIPMENT Godpfx Ajxx Dacsh Hjtt - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 - Coolant tank * with high-pressure pump : 70 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : HEXAGON - Workpiece probe : HEXAGON - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Chuck 3 jaws : SCHUNK

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand FANUC Model 31i model B5 Main Drive Number of axis 4 Movement X-Axis Movement 700 mm Y-Axis Movement 400 mm Gtodpfx Aex D Ixgsh Hjt Z-Axis Movement 330 mm Workpiece Workpiece weight 300 kg Table Outer length 850 mm Outer width 410 mm Tools Slots in storage 21 Additional Equipment Chip conveyor: A carpet This 4-axis FANUC Robodrill Alpha-D21LiB5 was manufactured in 2016. A vertical machining center featuring a 4th axis continuous table, spindle speeds up to 10,000 rpm, and a high-pressure system through the spindle at 15 bar. With less than 2000 working hours, it includes a tool magazine with a capacity of 21 and a chip conveyor. If you are looking to get high-quality milling capabilities, consider the FANUC Robodrill Alpha-D21LiB5 machine we have for sale. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: A04B-0105-B133#BBH, travel distance X-axis: 700 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 330 mm, table load: 300 kg, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Travel path X-axis: 700 mm Travel path Y-axis: 400 mm Travel path Z-axis: 330 mm Spindle speed (max.): 10,000 rpm Rapid traverse X-axis: 54 m/min Rapid traverse Y-axis: 54 m/min Rapid traverse Z-axis: 54 m/min Table dimensions (L x W): 410 x 850 mm Table load capacity: 300 kg MACHINE DETAILS Type of input power: Three-phase current Total weight: 2,200 kg EQUIPMENT Documentation/manual Continuously variable spindle speed Gsdjx Ap Rnspfx Ah Hjtt Large chip container High-pressure coolant pump through spindle Extraction system Data server in both machines (FTP accessible) Fanuc Program Transfer Tool (software) Manuals

Condition: good (used), Year of construction: 2009, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL SPECIFICATIONS Manufacturer: Fanuc Model: Robodrill α-T21iFa Gjdpjxflr Hefx Ah Hstt Year of manufacture: 2009 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 24,000 rpm Travel X-axis: 500 mm Travel Y-axis: 400 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter at 150–12,000 rpm: 80 mm Max. tool diameter at 12,000–15,000 rpm: 60 mm Max. tool diameter at 15,000–20,000 rpm: 45 mm Max. tool diameter at 20,000–24,000 rpm: 40 mm Permissible table load: 300 kg SCOPE OF DELIVERY Includes (not limited to): CNC machining center Fanuc Robodrill α-T21iFa Rotary unit for 4th and 5th axis Coolant pump and chip tray Exact scope of delivery according to photo series The Fanuc Robodrill α-T21iFa, built in 2009, is a versatile CNC machining center equipped with an additional 4th and 5th axis through the integrated rotary unit. This extension enables demanding multi-axis machining applications and significantly increases production flexibility. With a spindle speed of up to 24,000 rpm and travels of 500 x 400 x 330 mm, this machine provides ideal conditions for precise milling operations with high productivity. The 21-position tool magazine reduces setup times and allows for rapid tool changes. Thanks to its robust construction, a table load capacity of up to 300 kg, and the powerful Fanuc 31i control unit, this machine is perfectly suited for both series production and complex single parts. The integrated coolant system ensures process reliability and long tool life. No guarantee is given for the accuracy, completeness, or currency of the information provided.

Condition: used, Year of construction: 2003, A one owner and well maintained 2003 built Fanuc RoboDrill T21iD with Fanuc 16iMB control, BT30 10,000RPM Spindle, 21 Tool ATC, Nikken 4th Axis Head, Zero Point sub plate, machine vice & coolant equipment. Very clean machine! Specification: X Axis Travel 500 mm Y Axis Travel 400mm Gtsdpfsxqdvuox Ah Het Z Axis Travel 350mm Table Size 650 x 400mm Table Load 250 Kgs Spindle Taper BT-30 Max. Speed 10,000RPM Motor Power 7.5 KW ATC Tool Capacity 21 stations CNC Control Fanuc 16i-MB Rapid Traverse 54 m/min Machine Weight Approximately 2,000 kg Control: Fanuc 16i MB Spec: Travels 500mm x 400mm x 330mm 10,000 RPM Accessories: Nikken 4th Axis Head, Zero Point sub plate, machine vice

Condition: new, Year of construction: 2022, High-performance vertical machining center FANUC Robodrill α-D21LiB5 ADVANCED Control: FANUC 31i-B5 Travel X / Y / Z: 700 / 400 / 400 mm Distance spindle nose - table: 180 - 580 mm Clamping surface: 850 x 410 mm Max. Table load: 400 kg Max. Spindle speed: 24,000 1/min Spindle power 1 min / S1: 26 / 5.5 kW Torque 1 min / S1: 35 / 7.5 Nm Programmable feed rate: 30,000 mm/min Gsdpfx Asg If Sgeh Hjtt Rapid traverse all axes: 54 m/min Acceleration X / Y / Z: 1.4 / 1.0 / 1.6 G (with table load 100 kg, tool 2 kg) Number of tool positions: 21 Tool holder: BBT 30 Max. Tool length: 250 mm Max. Tool diameter: 80 mm Max. Tool weight: 4 kg Tool change from chip to chip: 1.3 s (with tool weight 2 kg) Positioning accuracy (ISO 230-2): < 0.006 mm Repeat accuracy (ISO 230-2): < 0.004 mm Automatic side door right Machine door Transformer AI - Contour control II TWP - Indexing command for tilted working plane High Speed Smooth TCP Original FANUC warranty 12 months

Condition: used, TECHNICAL DETAILS - Number of axes : 5 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 24.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] - Cutting feed rates (X/Y/Z) : 1-30.000 [mm/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] - Total installed power : 11 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2325 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 25424 [h] - Number of working hours : 3705 [h] EQUIPMENT Gtjdpfx Asxx A U Soh Hot - CNC : Fanuc 31i-Model B5 - 3 colors status lamp - Type of divisor : 4e-5e axe intégré * manufacturer : LEHMANN * model : Serie 500 - Coolant tank * with high-pressure pump : 70 [bars] - Coolant through spindle - Chips conveyor : ARRIERE - Tool probe : HEXAGON - Workpiece probe : HEXAGON - Fire extinguisher * * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer - Chuck 3 jaws : SCHUNK

Condition: ready for operation (used), Year of construction: 2014, Main Drive Spindle speed range 21000 Number of axis 4 Movement X-Axis Movement 500 mm Gtsdpfx Asx D N Nteh Hst Y-Axis Movement 400 mm Z-Axis Movement 330 mm This Fanuc Robodrill D21MiA5 Vertical Machining center was manufactured in the year 2014. It has 4 axis. The machine has a spindle speed of 21000 rpm. Open the attached PDF document to see all additional options of machine configuration (scroll down to access the document). Application Types Milling

Condition: like new (used), FANUC ROBODRILL α-D21SiB5, 4th axis Gsdpjxxkzasfx Ah Hjtt

Condition: good (used), Year of construction: 2010, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2010 Control: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel X-axis: 300 mm Travel Y-axis: 300 + 100 mm Travel Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 positions Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Permissible table load: 200 kg Machine weight: 2,050 kg Gtsdsxflvfspfx Ah Het Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes, among others (list not exhaustive): - CNC machining center Fanuc Robodrill α-T21iFa - 4th axis rotary table - Coolant pump and chip tray Exact scope of delivery as per photo documentation No guarantee is given for the correctness, completeness or currency of the information provided.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER Gjdpfx Asxcbvieh Hstt - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S

Condition: ready for operation (used), Year of construction: 1994, Control Unit Brand FANUC Model Series 16-M Movement X-Axis Movement 400 Y-Axis Movement 300 Z-Axis Movement 300 Gtodpfex D Nq Rsx Ah Hjt This 3-axis FANUC Robodrill Alpha-T10A was manufactured in 1994. It features a FANUC Series 16-M CNC, a table size of 650x400 mm, and can handle a maximum part weight of 200 kg. It has 10 tool pockets, enhancing its versatility for various machining tasks. Consider the opportunity to buy this FANUC Robodrill Alpha-T10A vertical machining centre. Contact us for more information about this machine. Application Types Milling

Condition: good (used), Year of construction: 2011, CNC Machining Center Fanuc Robodrill α-T21iFa TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-T21iFa Year of manufacture: 2011 Control system: Fanuc Series 31i-MODEL A5 Spindle speed: up to 10,000 rpm Travel paths X-axis: 300 mm Travel paths Y-axis: 300 + 100 mm Travel paths Z-axis: 330 mm Rapid traverse X, Y, Z: 54 m/min Tool magazine: 21 stations Max. tool weight: 2 kg Total tool weight: 23 kg Max. tool diameter: 80 mm Admissible table load: 200 kg Gtjdsxflxaopfx Ah Het Machine weight: 2,050 kg Power supply: 200/220 V, 3-phase, 50/60 Hz Power consumption: 1.5 kVA SCOPE OF DELIVERY Includes (not exhaustive): CNC Machining Center Fanuc Robodrill α-T21iFa Coolant pump and chip tray Exact scope of delivery as per photo series The Fanuc Robodrill α-T21iF machining center from 2011 impresses with its high precision and dynamic performance in a compact design. With travel paths of 300 mm in X, 300 + 100 mm in Y, and 330 mm in Z, the machine offers versatile machining capabilities. The 21-position tool changer ensures flexible production processes and minimizes setup times. The spindle achieves speeds of up to 10,000 rpm, enabling both fine machining and powerful cutting operations to be performed efficiently. The Fanuc Series 31i-Model A5 control system provides user-friendly and reliable programming. With a maximum workpiece load capacity of 200 kg and a compact construction, the machine is ideally suited for universal use in both single-part and series production. No guarantee is given for the correctness, completeness, or currency of the information provided.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S Gtedjxcbvcepfx Ah Het

Condition: good (used), Year of construction: 2013, Machining Center Fanuc Robodrill α-D21SiA5 Gtsdpfx Ahexflq As Hst TECHNICAL DATA Manufacturer: Fanuc Model: Robodrill α-D21SiA5 Serial Number: A04B-0102-B114#BDH Year of Manufacture: 2013 CNC Control: Fanuc Series 31i-MODEL B5 Spindle Speed: up to 24,000 rpm Travel X-Axis: 300 mm Travel Y-Axis: 300 + 100 mm Travel Z-Axis: 330 mm Rapid Traverse Rate: 54 m/min Tool Magazine: 21 positions Max. Tool Weight: 2 kg Total Tool Weight: 23 kg Max. Tool Diameter at 150–12,000 rpm: 80 mm Max. Tool Diameter at 12,000–15,000 rpm: 60 mm Max. Tool Diameter at 15,000–20,000 rpm: 45 mm Max. Tool Diameter at 20,000–24,000 rpm: 40 mm Permissible Table Load: 200 kg Machine Weight: 2,050 kg Power Supply: 200/220 V SCOPE OF DELIVERY Includes (list not exhaustive): • Fanuc Robodrill α-D21SiA5 Machining Center • 4th Axis Rotary Table • Coolant Pump and Chip Tray • Exact scope as per photo series No guarantee is given for the correctness, completeness, or up-to-dateness of the information provided.

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] Gtodpjxcbu Sofx Ah Het - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 Gedpexcbu Eefx Ah Hstt TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : GAUCHE - Tool probe : MIDEX BKS1S

Condition: used, TECHNICAL DETAILS - Number of axes : 3 MILLING SPINDLE - Tool holder type : BBT 30 (Big-Plus) - Spindle power : 12 [kW] - Spindle speeds : 10000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 500/400/330 [mm] - Rapid traverses rates (X/Y/Z) : 54 [m/min] TOOL CHANGER Gtedoxcbuxspfx Ah Hot - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 21 TABLE - Table dimensions : 650 x 400 [mm] - Maximum weight upon table : 300 [kg] - Distance table / spindle nose (min./max.) : 250-580 [mm] POWER SUPPLY - Supply voltage : 380 [V] WEIGHT & DIMENSIONS - Machine floor space : 1565 X 2027 [mm] - Machine height : 2346 [mm] - Machine weight : 2000 [kg] EQUIPMENT - CNC : Fanuc 31i model B5 - Rigid tapping - 3 colors status lamp - Coolant tank * with high-pressure pump : 15 [bars] - Coolant through spindle - Chips conveyor : DROITE - Tool probe : MIDEX BKS1S