Used Felder Exact for sale (128)

Condition: excellent (used), Year of construction: 2024, DEMONSTRATION MACHINE!! For sale: a used Felder membrane press MVP with a tiltable worktable. The machine is in like-new condition and has been serviced and inspected by our professional staff. (Fully functional) Technical data: - Worktable: 3290 x 1560 mm - HPL vacuum table with channels - 3 mm rubber membrane - Rotary vane vacuum pump - Undercarriage The membrane press is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Iiedpfoxzppbex Af Teb Related terms: press, veneer press, pneumatic press Reference: R-D1618

Condition: used, Year of construction: 2016, cutting height 133 mm tiltable sawblade 0-45° Iiodjymcpmjpfx Af Teb cutting width with rip fence 1250 mm motor 5,5 kw scorring unit cutting length 2500 mm machine avaiable from medio April

Condition: like new (used), DEMONSTRATION MACHINE For sale is a Felder FD-21 dowel boring machine. The machine is in use in our showroom and is therefore in mint condition. Technical data: - Version with 21 spindles - 2 hold-down clamps - 2 stops, each 1.5 m, for line boring - 2 side stops with reading optics - Indexing system for side stop with 8 positions - Motor power: 2 HP - Year of manufacture: 2025 The machine is located in A-5431 Kuchl and can be inspected and picked up during our opening hours at any time. Subject to prior sale! Related terms: dowel milling machine, drilling machine, line boring Iisdpfsxxi T Uox Af Tjb Reference: R-A0117

Condition: good (used), Year of construction: 2023, For sale is a Felder RL-160 clean air extraction unit with a maximum airflow rate of 3200 m³/h. The extraction unit is in excellent condition and has been inspected and refurbished by our professional staff. (Fully functional) Technical data: - Max. airflow rate: 3200 m³/h - Filter area: 10 m² - Extraction connection diameter: 160 mm - Automatic filter cleaning - Antistatic filter - H3 dust tested - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be viewed at any time during our opening hours. Subject to prior sale! Isdpfx Afoxnxm Nj Tjib Related terms: clean air unit, extraction unit, dust extraction, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) Iiedpfjxdkw Eex Af Tob The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP Iijdpfx Aew Hckrsf Tsb - Year of manufacture: 2023 The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117

Condition: as good as new (ex-display), Year of construction: 2023, Exhibition Machine For sale is our Felder RL-125 clean air extraction unit from our showroom, with a maximum air volume flow of 1900 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our specialist staff. (Fully functional) Technical data: Iiedpfx Asxd Aitsf Tob - H3 dust tested - Residual dust content < 0.1 mg/m³ - Max. air volume flow 1900 m³/h - Chip collection volume 200 litres - Year of manufacture: 2023 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117-102

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Iisdew Hcygopfx Af Teb Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: good (used), Year of construction: 2013, Panel saw Felder K 975 Cutting length: 3200 mm Cutting width: 1350 mm Iiodpfx Afoxl Dw Us Teb Max. cutting height: 130 mm (saw blade diameter: 400 mm) Saw blade and scorer tilting: 0-45° digital Saw blade and scorer height adjustment: digital Manual adjustable rip fence Activation of main saw blade and scorer from control panel and/or machine table Main motor for panel saw: 5.5 kW (7.5 HP) (adjustable 3500/4500/5500 rpm) Scorer motor for panel saw

Condition: ready for operation (used), machine/vehicle number: Sn96,5Ag3,0Cu0,5, functionality: unexamined, Felder Sn96.5Ag3.0Cu0.5 lead-free solder wire, 0.5 mm ! Sold only in lots of 10 pieces ! Iisdpfxsynhtao Af Tjb Manufacturer: Felder Model/Alloy: Sn96.5Ag3.0Cu0.5 Net weight: ~0.25 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 3 h, functionality: fully functional, Machine almost not used, like new, year of production 2021. Dimension of the table 220x80cm. Iiedpfxeudy D Tj Af Tjb

Condition: excellent (used), Year of construction: 2011, working width 950mm 1 kombi unit pneumatic segmented pad two feeding speed electric table regulation pneumatic oscillation motor power 11kW year of production 2011 Iijdsw Afd Hopfx Af Tsb

Condition: new, Year of construction: 2022, functionality: fully functional, noise level: 75 dB, total height: 2,285 mm, total length: 2,275 mm, total width: 1,150 mm, extraction nozzle diameter: 300 mm, space requirement height: 2,985 mm, space requirement length: 2,640 mm, The Felder RL300 industrial extractor has been put up for sale due to the failure of the tender. Brand new, unopened packaging for 75% of the new price. Guaranteed, with commissioning Description: Air flow, max: 6000 m3/h Nominal air flow: 20m/sec, 5090 m3/h Vacuum: 450 Pa Filter surface: 50 m2 Extraction nozzle diameter: 300 mm Modern, bright, clean design Great and efficient performance Chipboard storage Cartridge filter JET cleaning Iijdpfxex H Srrs Af Tob Year of manufacture: 2022

Condition: used, functionality: fully functional, filter area: 50 m², noise level: 75 dB, extraction nozzle diameter: 300 mm, nominal flow rate: 5,090 m³/h, Technical data Iedpjx H Stijfx Af Teib Max. airflow 6000 m3/h Nominal airflow 20 m/s 5090 m3/h Nominal pressure 20 m/s At extraction speed 2680 Pa Extraction connection Ø 300 mm Cartridge filter - Filter surface 50 m2 Noise level 75 dB Chip container 2x250 l - With cartridge filter - With chip remover - With JET cleaning

Condition: new, Year of construction: 2025, Band saw BS940RS3"SP V400/3/50 HP 20 CE CE VERSION Manual blade tensioning Standard equipment Self-braking motor 400 V/3/50 Reinforced twin-column base Steel blade tensioning system with guide lubrication system Front emergency stop activated via cable Rear emergency stop button Iedpsxzu Nmsfx Af Tsib Robust flywheels (1/3 crown in front) without rubber Bronze scrapers on flywheels Gravity blade lubrication system with felt pad Automatic star-delta starter Blade tension indicator Rack-and-pinion blade guide elevation with integrated blade guard Blade width: max. 90 mm Blade is not included This configuration includes: - Upper and lower blade guides with bronze side elements; - Three-phase 400V/50Hz/20HP self-braking motor; - Horizontal transport pallet FEEDER RA260 ELP (SR026) V400/3/50*CE WE VERSION Pneumatic control – Electronic variable speed drive

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Iijdowi Uftepfx Af Teb Milling motor: 5.5 kW European CE Certificate

Condition: excellent (used), Year of construction: 2010, 4 kW motor Isdpfoul Utmjx Af Toib 4 knives Table length 198 cm Table width 41 cm

Year of construction: 1990, condition: used, functionality: fully functional, The machine is in good condition. The milling head is not included. The Wegoma feed unit with standard stand is also included. Iodpfjyfxa Eex Af Teib

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 432.08.202.22, drilling depth: 70 mm, input voltage: 400 V, pressure: 8 bar, input frequency: 50 Hz, power: 1.5 kW (2.04 HP), The FD 921 is equipped with 21 drilling spindles set at a 32 mm pitch. Drill bits up to a diameter of 35 mm can be used for drilling dowel holes, line bore holes, and cup hinges. The large cast iron table, side stops, pneumatic workpiece clamps, and ergonomic controls make the FD 921 a premium dowel boring machine. Further technical data: Number of drill heads: 21 (11 right-hand, 10 left-hand rotation) Axis distance between drill heads: 32 mm Max. workpiece size: 850x3000 mm Max. workpiece height: 65 mm Required air pressure: 6-8 bar Accessories: - 11 tool holders with 5 mm right-hand dowel drill bits - 10 tool holders with 5 mm left-hand dowel drill bits - Positioning system for side stop with 8 stops - Additional pneumatic clamps - Mitre stop for FD 21 Ijdpjyf A N Djfx Af Toib - Bracket for side stops and further accessories - Gauge for transferring the position of the cast stops - Coupling system for table extension

Condition: reconditioned (used), Year of construction: 2010, Voltage 400V 3~ 50Hz 7.22kW Control panel with LCD display and keypad Jointing unit with 2 counter-rotating diamond cutters Corner rounding unit for edge faces Manual unit adjustment Iiodpfx Aoyf I T Ujf Tob Edge thickness 0.4-5.0 mm (optionally 8 mm) Workpiece height 8-60mm Feed speed 11 m/min 3 free slots for finishing units Edge feed for coil and strip material Scraper knife

Condition: good (used), Year of construction: 2017, functionality: fully functional, operating hours: 130 h, power: 6.5 kW (8.84 HP), input voltage: 400 V, input frequency: 50 Hz, Further technical data Edge thickness: 0.4–3 mm Workpiece height: 10–45 mm Chain feed with 8 m/min Total running length: 5,864 linear meters Jointing unit with max. 2 mm material removal Strip edgebander in single-feed operation Guillotine for hard PVC/ABS up to 3 mm thickness Teflon-coated glue pot, 1.2 kg capacity, with glue roller End trimming unit, 0.18 kW Extraction connections: 2x 80 mm, 1x 120 mm 2x HW saw blades, D-80 mm, Z16 Multi-milling unit with 12,000 rpm and 0.22 kW, 'Quickset' system for radius, flush and chamfer milling Control panel with LCD display and keypad Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Rotary table for edge banding rolls Minimum workpiece width: 70 mm Minimum workpiece length: 210 mm Extendable workpiece support, extendable up to 450 mm Manually adjustable workpiece height: 10–45 mm Additional equipment: Surface scraper, mechanically engageable Iiodpfx Aoyfvhasf Tsb Radius scraper knife

Condition: used, Year of construction: 2013, machine/vehicle number: 320.03.003.13, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 4,050 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of slots in tool magazine: 8, controller manufacturer: WoodFlash CAD, H10 CNC Control, total height: 2,510 mm, total length: 7,760 mm, total width: 4,860 mm, overall weight: 3,800 kg, controller model: H10 CNC Control, Windows 10, torque: 4 Nm, feed length X-axis: 3,120 mm, feed length Y-axis: 2,160 mm, feed length Z-axis: 105 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, spindle motor power: 10,000 W, nominal power (apparent): 11 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, rotational speed (max.): 24,000 rpm, rotational speed (min.): 1,000 rpm, tool diameter: 180 mm, tool length: 300 mm, tool weight: 1,000 g, Equipment: documentation/manual, rotational speed infinitely variable, Engine power: 13.59 PS/HP (10 kW) Year of manufacture: 2013 Motor voltage: 3x 400 V Ijdpfx Asw Tkm Tjf Toib Motor frequency: 50 Hz Weight (kg): 3800 Dimensions (L x W x H mm): 8768x4864x2510

Condition: good (used), Felder saw in nice condition. Has only had occasional use so in nice condition. Iiodporubg Hefx Af Tsb

Condition: used, Year of construction: 2017, Fw 1102 Perform Year of manufacture: 2017 5 operating hours 15 kW motor with brake Electric table height adjustment Continuously variable feed 2.5 – 18 m/min Sanding height: 3 – 170 mm Iijdpfjxrwn Tjx Af Tsb Abrasive belt dimensions: 1120 x 1900 mm Belt blowing, timer-controlled Sanding width: 1100 mm Extraction connection: 2 x 160 mm and 1 x 120 mm Vacuum carpet with integrated blower in the machine frame 1st unit: rubber-coated profiled contact roller 2nd unit: electro-pneumatic segmented sanding pad, 25 mm segment width, for veneer sanding work With lacquer sanding, digital grit compensation Pneumatic sanding belt oscillation Roller table extension on both sides Scotch-Brite brush unit at the machine outlet, 150 mm diameter Electronic sanding belt run monitoring Includes 30 sanding belts

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Weight approx. 700 kg Iedpfxexbq Ulo Af Teib