Band saw Felder FB510 used

Felder G-HBS133399H

Condition: used, Bandsaw Hammer 4400, in very good condition, 1.5 kW, approx. 110 kg Tjdsx H Ud Ropfx Aiqsa Price changes reserved, errors, printing and typographical mistakes excepted.

Condition: used, Planer-thicknesser STÖ310V, very good condition, 2.2 kW, 1800 mm table length, 310 mm table width, 4 knives, 300 kg Tedjx H Uc Tspfx Aiqoa Price changes reserved, errors and typographical mistakes excepted.

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device Tjdpfx Aswrm Dteiqoa >> Machine feet About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: excellent (used), SICAR Forte 400 thicknesser Tedpfxst Rp Hxe Aiqja Working width 400mm Planing height 300mm Shaft with conventional knives Shaft with 4 knives Shaft speed 5200r.p.m Electric lifting and lowering of the work surface Main motor 3kw 3 feed speeds CE certificate

Condition: new, Technical data: Working length: 1020 mm Tedpfx Aisct Rzbsqoa Max. sheet thickness: 2.5 mm Max. opening width: 48 mm Bending angle: 0 - 135° Width: 1350 mm Depth: 820 mm Height: 1140 mm Weight approx.: 285 kg Features: - Versatile bending machine for sheet metal workshops and repair shops - Robust construction in a modern design - Easy adjustment of the upper die using a foot pedal, leaving hands free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper die for a wide range of bending options - Optimal price-performance ratio - Quick and easy bending process using a handle - Non-slip rubber coating on the foot pedal for safe operation - Easy adjustment of the lower die to the respective sheet thickness - High upper die for producing profiles with high hems

Condition: used, Robland NLX1700 panel saw and spindle moulder, very good condition, 2x3 kW, approx. 2000 mm cutting length, approx. 100 mm cutting height, 1700 mm sliding table length, approx. 450 kg Tjdpowzzh Ejfx Aiqja Subject to price changes, errors, misprints and typographical mistakes excepted.

Condition: new, Bernardo HBS 460 N bandsaw - 400 V Technical specifications Cutting width 465 mm Cutting height 280 mm Saw band dimensions 3607 x 25 x 0.6 - 3 TPI Saw band widths 9.5 - 25.4 mm Cutting speed 420 / 840 m/min Table dimensions 480 x 630 mm Table height 970 mm Saw table tilt -5° to 45° Dust extraction port Ø 2 x 100 mm Motor output power S1 100% 2.2 kW (3.0 HP) Motor input power S6 40% 3.0 kW (4.0 HP) Voltage 400 V Tedpsd N S Urefx Aiqja Machine dimensions (W x D x H) 1050 x 800 x 1950 mm Weight approx. 162 kg Scope of delivery • Saw band • Rip fence with magnifying glass • Miter fence • Drive wheels made of aluminum • Ball-bearing saw band guide • Motor incl. brake • Push stick • Operating tools

Condition: new, Year of construction: 2025, Suction nozzle diameter: 1 x 200, 3 x 100 mm Nominal air flow rate: 1760 m³/h Residual dust content: 0.1 mg/m³ Chip collection volume: 240 l Filter cleaning: motorized Tedpfx Aiohpmawsqoa Motor power: 3 kW Noise level: 78 dB(A) Machine length: 1340 mm Machine width: 900 mm Machine height: 2170 mm Weight: 178 kg

Condition: new, plate thickness 1.20 mm throat 270 (140) mm distance between roll centers 60.0 mm Tsdpfxjxabmcs Aiqea total power requirement manuell kW weight of the machine ca. 46.0 kg dimensions of the machine ca. 600 x 250 x 500 mm Furnishing: - various replacement rollers - hand crank - front stop

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. Todpfx Aox D Ex Roiqja • Volume flow: Max 6000 m3/h • Nominal volume flow 20 m/s: 5090 m3/h • Negative pressure at total connection at 20 m/s: 2680 Pa • Extraction connection: Ø 300 mm • Filter area: 50 m2 • Sound pressure: 75 dB • Chip collection container: 2 x 250 liters • Extraction connection can be mounted on the left or right