Used Felder F 900 for sale (131)

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Lodpfx Aew Hfd Ioanehr Technical data: - 5 spindle speeds - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm - Electrically height-adjustable and tiltable with "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299. Related terms: spindle moulder, milling machine, moulding Reference: R-A0117

Condition: excellent (used), Year of construction: 2022, Tilting spindle moulder with sliding table FELDER Ledpfxswu D A Ej Aanjhr Model F 700 Z Sliding table length: 1000 mm Motor power: 5.5 kW Motor voltage: 3 x 400 V, 50 Hz Spindle tilting range: 90 - 45 degrees Spindle diameter: 30 mm Spindle speed: 3500/6500/8000/10000 rpm Table opening: 230 mm Extraction port diameter: 120/80 mm CE Note for used machines: • Errors in technical specifications and prior sale excepted. • Listed prices are ex-location – free loading! • Machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines at the location. • Special agreements only valid in written form. (We only respond to inquiries including your address and telephone number!)

Condition: used, Edgebanding machine Tempora F 60.06 - Year of manufacture: 2018 Lhodpfxsx Ha I Us Aanor - Jointing cutter, radius cutter, scraper for radii and surfaces - Cleaning and release agents - Spray device - Edge thickness: 0.4-6 mm - Installation length: 3220 mm - Sawing/trimming unit

Year of construction: 2022, condition: as good as new (ex-display), 8 feeding speed 3.5 | 4.0 | 6.5 | 8.0 | 10.0 | 12.5 | 20.0 | 25.0 m/min 4 Roller Diameter of the roller D 120 Ledpfx Aajirwp Eonshr Motor V400/50 0,75 kw 1 PS

Condition: used, Year of construction: 2012, 1 edge sanding machine, manufacturer Felder, model FS 900, serial no. FS01.07.12, year of manufacture 2012, 4-roller feed unit type F 48, internal no. I440047 Ljdpfxoxzn Aye Aanohr

Condition: excellent (used), Felder F 700 M Shaper (Spindle Moulder) Electric spindle height adjustment and manual angle adjustment from 0 to +45 degrees Ljdpoxyfrpsfx Aanohr Interchangeable 30 mm spindle Long tables: 215 cm 4 spindle speeds 5.5 kW motor Spindle lock Brake Very good condition, machine fully checked and ready for operation.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: Lodpfx Aswp Ri Uoanehr - 4 milling speeds - Milling spindle tiltable 90° - 45° - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: used, Felder Format 4 Kappa 450 sliding table saw Heavy-duty precision sliding table saw Scoring unit 5.5 kW motor Saw blade tiltable from 90° to 46° Electric angle and height adjustment Saw blade diameter up to 450 mm Lhjdpfx Aaox H Nkljnjr Trimming length 3200 mm Cutting width with parallel stop 1200 mm Year of manufacture 2005 CE-certified version Machine from carpentry liquidation/retirement in VERY GOOD CONDITION from carpentry shop

Condition: excellent (used), Catalogue number: 7531 TECHNICAL DATA Equipment: - Disc - Tape feeder - Guillotine - Glue tank (granulate) - 3 pressure rollers - Trimming unit with final saws - 2 milling units for edge shaping (radius cutters) - 2 polishers Minimum length of workpiece: 140mm Minimum width of workpiece: 60mm Thickness of the edged workpiece: 10-55mm Edgebanding tape thickness: 0.4-3mm Extendable support from the table Motor power: 5.6kW Extraction port diameter: 120mm Dimensions (L/W/H): 3480x1050x1020mm Weight approx.: 900kg - Not repainted - Austrian manufacture - Year of production: 2007 - Condition: very good - Used edgebander Net price: 18,900 PLN Net price: 4,500 EUR Net price calculated with an exchange rate of 4.2 PLN/EUR Lodpovtl Tqofx Aanehr (In the case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2011, It is in perfect working condition, looks very good and has few operating hours. It has pre-milling, circular saw cutting, up and down milling, radius tickling, surface tickling, and polish. Lhsdpfxsxwqmao Aaner

Condition: used, Combined Machine FELDER BF6-26 -used- Tilting circular saw, Angle-mitre fence, Tilting spindle moulder, Spindle moulder with forward and reverse rotation, Self-adjusting cutterblock ----- Technical Data ----- Planing width: 260 mm, Number of knives: 2 pcs, Cutterblock diameter: 86 mm, Passage height: 220 mm, Planer table length: 1300 mm, Cutting width: 780 mm, Circular saw tilting range: 0-45°, Spindle moulder diameter: 30 mm, Spindle moulder tilting range: 0-45°, Usable spindle moulder length: 120 mm, Max. cutter diameter: 220 mm, Max. retractable cutter diameter: 180 mm, Spindle speeds: 3500/6100/7800 rpm, Motors: 3 units, Extraction port for planer: 120 mm, Ljdpfexlt Shex Aanohr Extraction port for saw: 120 mm, Extraction port for spindle moulder: 120 mm

Condition: like new (used), Year of construction: 2024, Technical data Year of construction: 2024 Special features and details X Motion control with touch screen Lhjdjv Dw Axspfx Aanor 3.2M sled Switching on and off on the sliding carriage Cutting width 1250 mm Controlled/electric parallel stop Electric angle adjustment scorer NEW CONDITION

Condition: excellent (used), Felder RL 350 extraction unit Capacity: 6,920 m3/h Extraction port: 350 mm Chip container Fire extinguishing system with water connection Motor: 11 kW Ledpfjx Nnxaex Aanehr Weight: 830 kg Very good condition

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - Maximum volume flow: approx. 3,200 m³/h - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm - Motor power: 3.0 kW - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Weight: approx. 320 kg Availability: short-term Location: 63934 Röllbach Lhsdpfjxllw Njx Aaner

Condition: used, Mobile Extraction Unit AF 14 Lsdjx Htbnjpfx Aanshr - Year of manufacture: 2013 - 400 Volt - 1.85 kW - 2350 m³/h air flow rate - 140 mm Ø suction port - 200 liter chip collection bag - Steel impeller - Dimensions (L x W x H): 965 x 570 x 2030 mm - Weight: approx. 50 kg

Condition: like new (used), pre-milling unit, crosscut saws, milling cutters, rounding unit, radius scrapers, flat scrapers, polishers, year of manufacture 2012 Lhjdpfxox H Nw Eo Aanjr

Year of construction: 2008, condition: ready for operation (used), General Data Measurements height 250 mm Measurements depth 1700 mm Dimensions Machine Length 3530 mm Main Drive Spindle Speed 24000 RPM This 3-axis CNC processing center manufactured in 2008 features a robust Felder Format4 Profit 2.s with a working area of X=3530 mm, Y=1700 mm, and Z=250 mm. It achieves speeds up to 60 m/min in X and Y, and 15 m/min in Z. Includes a mobile dust extractor Felder RL200, enhancing operational cleanliness and efficiency. Consider the opportunity to buy this Felder Format4 Profit 2.s CNC processing center. Contact us for more information about this machine. Lsdpfxox D Hqnj Aanehr Application Types CNC Wood Machining

Condition: used, Year of construction: 1999, Used machine Year of manufacture: 1999 Equipment and technical data: - Maximum volume flow: approx. 3,200 m³/h Lhsdpox Enr Eofx Aanor - Nominal volume flow: 1,750 m³/h - Negative pressure: approx. 1,120 Pa - Filter area: approx. 10 m² - Collection container: total volume approx. 400 liters - Extraction connection diameter: 160 mm - Motor power: 3.0 kW - Voltage: 3 × 400 V, 50 Hz - Phases: 3N - CE marking Dimensions: approx. 1,775 × 898 × 2,005 mm Weight: approx. 320 kg Availability: short-term Location: 63934 Röllbach

Year of construction: 2021, condition: ready for operation (used), This Felder RL 300 was manufactured in 2021. It features a new extraction system, never used, with a maximum volume flow of 6000 m3/h and a nominal volume flow at 20 m/s of 5090 m3/h. The machine includes a filter area of 50 m2 and dual 250-liter chip collection containers. Sound pressure level is at 75 dB. For more information about this machine, please reach out to us. Application Types Other Woodworking Machinery Lhodpfx Aaex D Ex Rjnjr

Year of construction: 2021, condition: ready for operation (used), Main Drive Number of axis 4 Movement X-Axis Movement 4000 mm Lhodpfx Aajx D D Hmensr Z-Axis Movement 500 mm Y-Axis Movement 1670 mm This 4-axis CNC processing center was manufactured in 2020. It features a 12 kW milling spindle with a speed range of 1000-24000 rpm and a C-axis rotation of 0-360°. The machine includes a 12-station linear tool changer and a comprehensive drill head with 16 spindles. It also boasts a robust safety system with a light barrier. Consider the opportunity to buy this Felder Format 4 Profit H 200 CNC processing center. Contact us for more information about this machine. Application Types CNC Wood Machining

Condition: ready for operation (used), Year of construction: 2020, cutting length (max.): 5,300 mm, cutting depth: 80 mm, Technical Specification Max. Cutting Length 5300 mm Max. Cutting Depth 80 mm This Felder Format 4 Kappa V80 panel saw was manufactured in 2020. It features a powerful 5.5 kW motor, a saw blade diameter of 300 mm, and can handle cutting lengths up to 5300 mm and heights up to 2200 mm. Ideal for precise large-scale panel cutting. Contact us for more information about this machine. Application Types Ljdpfx Asx D D Scjanshr Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2019, This Felder FORMAT 4 Tempora60.06LX edgebander was manufactured in 2019. It features an x-motion PLUS control system, chain feed with a speed of 10 m/min, and a Teflon-coated gluing unit for EVA or PUR granulate. The machine supports edge thicknesses from 0.4 to 3 mm and includes a multifunctional milling unit. Consider the opportunity to buy this Felder FORMAT 4 Tempora60.06LX edgebander. Contact us for more information about this machine. Ledox D D R Sepfx Aanehr Application Types Edge Banding

Condition: ready for operation (used), Year of construction: 2010, Additional Equipment Diamond cutter and glue roller newly installed. Lhsdpfex D Rklox Aanjr This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information. Application Types Edge Banding

Year of construction: 2021, condition: ready for operation (used), This Felder FORMAT 4 KAPPA 550 panel saw was manufactured in 2021. It features a sliding table saw with a saw blade diameter range of 250-550 mm, offering cutting heights of 202 mm at 90° and 140 mm at 45°. It supports three speeds: 3000, 4000, and 5000 rpm, and includes a cutting width of 1250 mm and length of 2800 mm. The machine also boasts e-motion control and a telescopic stop for crosscuts up to 3200 mm. Contact us for more information. Ledpfxox D Exqj Aanehr Application Types Sawing (Wood)

Condition: ready for operation (used), Year of construction: 2021, This Felder FW 1102 P was manufactured in 2021. A used wide belt sander featuring a contact roller unit and a fine sanding with segmented electro-pneumatic sanding shoe. It includes a 7" touch color screen, digital grain compensation, and a vacuum table. The feed speed is variable from 2.5 to 18 m/min, sanding width of 1100 mm, and height range from 3 to 170 mm. Consider the opportunity to buy this Felder FW 1102 P belt sander. Contact us for more information. Lodpfx Ajx D Eyhjanshr Application Types Sanding