Used Felder Kappa 450 for sale (131)

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, FELDER G330 Edge Bander Used edge bander, post-service inspection. - Machine in excellent technical condition. - Year of manufacture: 2013. - One-owner machine. - Recently serviced. EQUIPMENT: Electrical equipment: - Supply voltage: 3x 400 V - Power frequency: 50 Hz Workpiece dimensions: - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units: - Edge feeding from coil via feed plate - Edge feeding for thicknesses 0.4–3 mm, manual feed for individual edging strips - Guillotine shear for trimming coil edges up to 3 mm thick - Gluing unit for hot-melt granulate adhesive, Teflon-coated glue pot - Spring-loaded pressure unit, 1 straight pressure roller and 1 pressing roller - Saw trimming unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for rounding, straight milling, and chamfering - Mechanically-activated corner scraper unit for R=2 mm - Mechanically-activated flat scraper unit Operation: - Control panel with LCD display and keypad - Quick, tool-free unit adjustment system Feed: - Workpiece feed with chain-type conveyor - Feed speed: 8 m/min - Extendable support General data: - Extraction port Ø 120 mm Overall dimensions: - Length: 2,000 mm - Width: 800 mm - Height: 1,500 mm - Weight: 360 kg Machine financing available via leasing or installments. Just visit our website: jbsmaszyny.pl We invite you to test the machine. Where to see our machines? JBS WOODWORKING MACHINERY WOLICA DRUGA 26 23-310 MODLIBORZYCE, Poland Nationwide machine transport! Phone: 663 495 647 (German) Phone: 664 335 475 (English) Chjdpfx Aexly I Aoddof Phone: 530 632 386 (English)

Condition: excellent (used), Year of construction: 2023, Single-sided edge banding machine Make: Felder / Format 4 Model: Tempora 45.03 L Cjdpfx Ajxrbkfsddohf Year of manufacture: 2023 Edge bander with pre-milling unit Edge thickness: 0.4 - 3 mm Workpiece thickness: 8 - 45 mm Pre-milling unit Gluing station for PUR/EVA End trimming saw unit Flush/radius milling unit Corner rounding unit Cleaning spray unit Buffing unit Control unit: Smarttouch 15" touchscreen Set-up length approx. 4300 mm Total connected load: 14.5 kW Voltage: 400 V, 50 Hz, 3-phase, 22.8 A

Condition: like new (used), Year of construction: 2024, Demonstration machine For sale is our Felder RL-300 clean air extraction unit from our showroom, with a maximum air flow rate of 6,000 m³/h. The extraction unit is in as-new condition and has been inspected and serviced by our technical staff. Technical specifications: - Extraction capacity: 6,000 m³/h - Maximum negative pressure: 2,450 Pa - Extraction connection diameter: 300 mm - Chip container volume: 2 x 210 liters - Dimensions: 3,015 x 970 x 2,280 mm (L x W x H) - Automatic extinguishing system - Steel impeller Cedpfx Aoxdlwmsddshf - Motor power: 8.2 kW - Year of manufacture: 2024 The clean air unit is located at A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: reconditioned (used), Year of construction: 2010, functionality: fully functional, Motor 7.35 kW 5 spindle speeds 3500-10000 rpm Milling spindle tilting 0-45° Sliding table length 1300 mm Electric height and tilt adjustment Electrically adjustable milling fence Milling fence completely foldable Max. tool diameter 250 mm Fence jaws aluminium 550 mm Centrex milling guard Csdpfx Aoxbq Uljddehf Weight approx. 700 kg

Year of construction: 2013, condition: excellent (used), Caracteristică Valoare / descriere Funcție aplicare cant pe borduri / plăci Lungime totală 2 444 mm (≈ 2,44 m) Sistem de alimentare transport pe lanț (“chain conveyor”) Reglaje rapide (“Quick‑Set”) da — pentru adaptarea la grosimea cantului Buncăr / rezervor de adeziv Teflon coated, capacitate 1,2 kg Grosimea cantului suportată ~ 0,4 – 3 mm (pentru cant în rolă) Grosimea plăcii (piesei de lucru) 10 – 45 mm Lățimea minimă piesă ~ 70 mm Lungimea minimă piesă ~ 210 mm Viteza de alimentare ~ 8 m/min Greutate estimată ~ 350 kg Diametrul tubului de aspirare ~ 120 mm Chsdexga Npepfx Addsf

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, total length: 3,350 mm, workpiece height (max.): 45 mm, total width: 1,510 mm, edge thickness (max.): 45 mm, total height: 1,640 mm, overall weight: 770 kg, extraction nozzle diameter: 60 mm, We offer for sale a professional edge banding machine with pre-milling unit of the company FELDER model G480. Below you will find some useful information about the machine: * Year of production - 2017 * Equipped with the Schugoma hot-air system for zero joints * Connected load - 7 kW * Edge thickness - 0.4-350 mm Cjdetp T Dtepfx Addshf * Thickness of the sheets - 8-45 mm * Minimum width/length of the sheet - 70/210 mm * feed speed - 9 m/min * has a pre-milling and corner rounding unit * Automatic feeding of edges from a roll * Impact shears for PVC and ABS edges up to a thickness of 3 mm. * Teflon glue tank with a capacity of 1.2 kg. * Saw blade cutting unit with 12,000 rpm. * Rotating control panel with LCD display. * Suction nozzle - 7 x 60 mm * Weight approx. 770 kg * Overall dimensions 335 x 151 x 164 cm (Wx Lx H) * Perfect technical and visual condition

Condition: good (used), Year of construction: 2010, Fully functional Year of manufacture: 2010 Cjdpsxqgr Sjfx Addjhf Radius scraper blade Flat scraper blade Cleaning unit Jointing cutter up to 3 mm Nesting milling unit Pneumatic feed stop Polishing Machine no.: 200.07.011.10

Condition: like new (used), Year of construction: 2024, Machine Technical Data: Carriage length: 2500 mm X-Roll carriage guide system Saw adjustable from 0–45° Saw lifting and lowering Digital measurement display on right side Cutting width right: 850 mm Chodpfowi Uftex Addef Spindle diameter: 30 mm Spindle tilt: 0–45° adjustable Spindle height adjustable Left-right rotation Spindle speeds: 3,500 / 6,500 / 8,000 / 10,000 rpm Max. diameter of milling tools: 230 mm Spindle working height: 115 mm Spindle covers Main saw motor: 5.5 kW Milling motor: 5.5 kW European CE Certificate

Condition: as good as new (ex-display), Exhibition machine For sale is our Felder RL-200 clean air extraction unit from our showroom, featuring a maximum air flow rate of 4,000 m³/h. The extraction unit is in mint condition and has been inspected and serviced by our qualified personnel. Technical data: Chedexdkzqepfx Addof - H3 dust-tested - Extraction connection diameter: 200 mm - Extraction can be installed on right or left side - Manual chip shaker - Steel impeller - Max. air flow: 4,000 m³/h - Minimal space required: 1,775 x 898 x 2,005 mm (L x W x H) - Year of manufacture: 2024 The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), functionality: fully functional, grinding width: 1,100 mm, grinding height: 170 mm, power: 14.71 kW (20.00 HP), grinding belt length: 1,900 mm, grinding belt width: 1,100 mm, input frequency: 50 Hz, input voltage: 400 V, Further technical data: Sanding height: 3 - 170 mm Extraction connection: 200 / 120 mm Standard equipment: - Star-delta starter - CE safety standards - Electrically controlled height adjustment of the feed table including fine adjustment from the control panel - Stepless feed speed from 2.5-18 m/min adjustable via inverter from the control panel - Hand guard and workpiece thickness safety device - Endless belt conveyor with honeycomb structure - Automatic feed belt centering Chedpfxevf D S As Addef - Control unit with 7" touch color display - 1st unit with rubberized, profiled contact roller, 85° Shore hardness - 2nd unit (sanding pad unit): The electro-pneumatic segmented sanding shoe with 25 mm segment width enables the independent processing of multiple workpieces for perfect veneer sanding. The standard time-controlled cleaning blower ensures maximum sanding belt service life, especially for lacquer sanding or very fine grit. - Digital grit compensation - Mechanically preloaded rubber pressure rollers - Sanding belt oscillation, electronic-pneumatic - Electronic sanding belt run-off protection - 1 motor with 15 kW (20 HP) including automatic star-delta start - Min. air pressure (bar): 6 Optional equipment: - Vacuum table with integrated blower in the machine frame - 15 kW (20 HP) motor including variable cutting speed from 2.4 to 19 m/sec - Double-sided roller table extension, 200 mm - Scotch Brite brush unit at the machine outfeed, D=150 mm - Switching contact for slide valve control; shut-off valves for extraction can thus be actuated. Including delivery and installation in postcode areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89

Condition: excellent (used), Felder G330 Feature Specification / Description Machine length / installation length ~ 2444 mm (≈ 2.44 m) Edge (band) thickness ~ 0.4 mm up to ~ 3.0 mm (some sources say up to 5 mm for stick edges) Workpiece (panel) thickness ~ 10 mm to 45 mm Minimum workpiece size ~ 210 mm length; ~ 70 mm width Feed speed / advance speed 8 m/min in many listings Motors / Power 5.5 kW (for some used models) 3×400 V, 50 Hz is a common power configuration Glue pot Teflon‑coated glue pot, capacity ~ 1.2 kg glue Cutting / Trimming / Milling features Pneumatic guillotine cutters for end cuts Quick‑Set system for switching between flush, beveled, or radius trimming Radius scraping unit, glue scraping unit, buffing unit (optional) Dust / vacuum connection 120 mm vacuum connection (Ø 120 mm) este într-o stare perfectă de funcționare Codpfxoxga Sks Addohf

Condition: used, Year of construction: 2016, functionality: fully functional, cutting height (max.): 104 mm, cutting width (max.): 900 mm, cutting length (max.): 1,300 mm, saw blade diameter: 315 mm, - Austrian production - Year of manufacture: 2016 - X-Roll carriage guide - CE certified - Possibility to install a cutter TECHNICAL PARAMETERS: - Carriage length: 1300 mm - Cutting width on right side: 900 mm - Motor power: 7.35 kW - Electric brake - Blade diameter: 315 mm - Possibility to install milling cutter: 228 mm thickness from 6–20 mm - Fence with one stop: 1050 mm - X-Roll carriage guidance - Saw blade angle adjustment: 0° – 45° Chedpfxew H R Ufs Addof - Height adjustment - Cutting height with blade 315 mm: 104 mm - Extraction port diameter: 120 and 50 mm - Table height from base: 900 mm - Transport dimensions: 150 x 150 x 110 cm - Weight: ~400 kg

Condition: used, Year of construction: 2010, Used machine Year of manufacture 2010 With joining unit and corner rounding unit Control panel with LCD display and keypad Joining unit with 2 counter-rotating diamond cutters With edge feeder for roll and strip material With glue roller and glue unit With pre-trimming from the roll With pressure unit With trimming unit with pulling trimming cut With flush and radius trimming unit Corner rounding unit for front edges Cjdpfow I H Rkjx Addohf Manual unit adjustment Edge thickness 0.4-5 mm Workpiece height 8-60 mm Min. workpiece width 70 mm Min. workpiece length 140 mm Feed speed 11 m/min With radius scraper unit With flat scraper With polishing unit Extendable workpiece support Extraction connection 120 + 2 x 80 mm Weight approx. 990 kg L x W x H 4550 x 1550 x 1100 mm Availability: Short-term Storage location: Flörsheim

Condition: good (used), Year of construction: 2005, functionality: fully functional, number of planer blades: 4, power: 7.5 kW (10.20 HP), blade shaft diameter: 120 mm, table width: 510 mm, Equipment: motor brake, The planer is in very good condition, has always been reliable and has run well. Thanks to the parallel fence, it is very space-saving! The planer knife guard is included! Csdpfxoxdhifo Addshf

Condition: as good as new (ex-display), functionality: fully functional, Demonstration machine For sale is our Felder RL-140 clean air extraction unit from our showroom, with a maximum air volume flow of 2,500 m³/h. The extraction unit is in like-new condition and has been inspected and serviced by our professional staff. Technical data: - H3 dust-tested Chsdpfoxdkw Eex Addjf - Extraction connection diameter: 140 mm - Extraction can be configured for right or left side - Manual chip shaker - 10 m² filter area - Max. air volume flow: 2,500 m³/h - Minimal footprint: 1,040 x 898 x 1,940 mm (L x W x H) The clean air unit is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: extraction, extraction unit, clean air unit, clean air, RL Reference: R-A0117

Condition: as good as new (ex-display), functionality: fully functional, overall weight: 850 kg, power: 5.52 kW (7.51 HP), input voltage: 400 V, input frequency: 50 Hz, grinding width: 650 mm, Further technical data Grinding height: 3 mm - 200 mm (250 mm) Grinding width: 650 mm Extraction connection: 2 x 120 mm Chedpjw Axi Aofx Addef Feed speed: infinitely adjustable 2.5 - 10 m/min Standard equipment - Maintenance interval control - Plain text error messages - Constant infeed height – fixed table, 900 mm - Electric height adjustment incl. fine adjustment from the control panel - Feed speed steplessly adjustable from 2.5 to 10 m/min via inverter at the control panel - Endless belt conveyor - Automatic feed mat centering - 1st brush unit with selectable steel brush, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - 2nd brush unit with Tynex brush K60 D=200mm, counter-rotating operation, mechanically preloaded rubber pressure rollers, 1 motor with 4 kW and cutting speed of 1000 rpm - Dimensions: 1455 x 1070 x 1250 mm - Required air pressure: 6 bar Optional equipment 022 7.5 HP (5.5 kW) motor power, 1st unit 024 7.5 HP (5.5 kW) motor power, 2nd unit 027 Oscillation control for 1st and 2nd brush units 028 Opening height 250 mm instead of 200 mm

Condition: ready for operation (used), Year of construction: 2011, operating hours: 14,360 h, Felder G580 edge banding machine, pre-milling units, roller glue application, pneumatic pre-cut guillotine, pressure rollers, end-trim saws, top-bottom milling unit R1-R2, corner rounding unit, profile scraper, flat scraper, polisher, edge thickness 0.4-5 mm, maximum panel height 60 mm, feed speed 11 m/min, total power required 7.22 KW, machine length 410 cm, well-maintained machine, ready for testing, net price, Csdpfexcg Nzsx Addohf

Condition: excellent (used), Year of construction: 2013, I sell the format sliding table saw with scoring Manufacutrer: FELDER Model: K975 Year 2013 Cutting length 3200mm. Cutting width 1350mm Cutting height 130mm (at saw blade 400mm) Saw blade and scoring tilting 0-45° digital Saw blade and scoring height adjustment digital Parallel fence manual adjustable. Turn on the main saw blade and scoring unit from control panel Turn on the main saw blade and scoring unit from aluminium sliding table Main motor format sliding table saw 5,5KW (7,5 HP) (3500/4500/5500 rpm adjustable) Scoring motor format sliding table saw Cjdett Nq Djpfx Addehf Tools, Optionals, and equipment on photos included in price. Very good condition. Available immediately.

Condition: used, Felder KF700S/03 panel saw-milling machine, year of manufacture 2006, good condition, including folding device for feed and tenon hood, 5.5 kW S6, 3200 mm panel table length, 3500,6500,8000,10,000 rpm, 780 kg Chedpfx Aewzzh Sjddjf Prices subject to change, errors, printing and typesetting errors reserved

Condition: like new (used), Year of construction: 2022, The Felder Creator 950 Premium is a high-precision CNC machining center designed for the efficient and flexible production of wooden parts. Thanks to its robust design and modern technology, it enables fast and precise milling, drilling and grooving. The machine is ideal for furniture and interior design manufacturers looking for a reliable and powerful CNC solution. Technical information Machining area: X = 3500 mm, Y = 950 mm, Z = 80 mm Axis positioning speed: Depends on the selected safety system Milling spindle: 12 kW (S6) HSK F63, 24,000 rpm Safety features: CE certification, optical operation indication Power supply: 3 x 400V / 50 Hz Software: WoodFlash - CNC module, tool database, program editor Machine composition Continuous CNC center with clamp drive in the X direction and fixed gantry structure in the Y direction Automatic central lubrication Pneumatic pressure rollers for better workpiece fixation Height-adjustable work surface for optimal handling Pinning unit with precise glue dosing Csdev I Sytepfx Addshf

Condition: like new (used), Year of construction: 2023, functionality: fully functional, For sale is a Felder F-700 Z milling machine with 4 spindle speeds. The machine is used as a showroom model at our facility and can be considered as new, with full warranty/guarantee. Technical specifications: - 4 milling speeds - Milling spindle tiltable 90° - 45° Chsdpfx Aswp Ri Ujddsf - Milling fence for tools up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table - Motor power 5.5 kW / 7.5 HP, SD start - Year of manufacture: 2023 / as new The machine is located at A-8561 Söding and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel.: 03137-3109 Related terms: milling cutter, milling machine, milling Reference: R-D1618

Condition: like new (used), Year of construction: 2022, The Felder profit H80 is a professional CNC machining center suitable for high-volume furniture production and other woodworking applications. The machine enables precise machining with high speed and efficiency. Thanks to its gantry design and advanced vacuum system, stable and safe machining of even the largest parts is ensured. Technical information Machining area: X = 3090 mm, Y = 2100 mm, Z = 85 mm Power transmission: Rack in X and Y axes, ball screw in Z axis Feed speed: X = 25 m/min, Y = 25 m/min, Z = 15 m/min Vacuum table: 10 vacuum fields with Smart Zoning function Milling spindle: 12 kW (S6) HSK F63, 24,000 rpm Chsdpfx Adjv I Sxpodof Power supply: 3 x 400V / 50 Hz Software: Compact Control - supports ISO Code and WoodFlash Extraction: Central suction nozzle with slide valve distribution Safety features: Light barrier system, optical operation indication Machine composition Robust gantry construction with double drive in X axis Fully automated central lubrication of all os Control panel with 24" LED display and USB interface Green Line energy package for energy saving Drilling head DH 16 4H 2S – 12 vertical and 4 horizontal spindles Loading unit with lifting table for efficient handling Conveyor belt on the machine output side for smooth workpiece removal

Condition: like new (used), For sale is a used Felder spindle moulder F-900 Z with mortising and slotting table length of 1300 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 5 spindle speeds Chodpfx Asw Hfd Isddof - Spindle tiltable 90° - 45° - Fence for tooling up to Ø 230 mm - Multi-adjustment system - Mortising and slotting table 1300 mm - Electrically height-adjustable and tiltable with "PowerDrive" - Motor power 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Info Tel. 06244-20299. Related terms: spindle moulder, milling machine, moulding Reference: R-A0117

Condition: excellent (used), For sale is a used Felder AD5-31 jointer-thicknesser with a planing length of 1500 mm. The machine is used as a demonstration unit in our showroom and is therefore in like-new condition. Technical data: - 4-knife cutterblock - Planing width 310 mm - Planing length 1500 mm - Max. workpiece height 230 mm Codpjw Hcygofx Addshf - Suction port Ø 120 mm - Motor power 4 kW / 5.4 HP - Year of manufacture 2022 The machine is located at A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Contact: Tel. 06244-20299. Related terms: jointer, thicknesser, planer, jointer-planer, thickness planer Reference: R-A0117

Condition: like new (used), For sale is a used Felder AD7-41 surface-planer thicknesser with a planing thickness up to 230 mm. The machine is in use as a demonstration unit in our showroom and is therefore in like-new condition. Technical specifications: - 4-knife cutterblock - Planing width: 410 mm - Table length: 2000 mm - Max. workpiece height: 230 mm - Electric thickness adjustment PowerDrive - Extraction port Ø 120 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 2023 Chodpfx Asw Hckrsddof The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! For information call 06244-20299. Related terms: surface planer, thickness planer, planing machine, jointer, thicknesser Reference: R-A0117