Used Film Line for sale (10,865)

Condition: used, Year of construction: 1990, material width coil line 650 mm Itedpfovuudusx Acrjh coil weight 2 x 3,5 t coil internal diameter 460 - 530 mm coil external diameter 1500 mm material thickness coil line 0,8 - 3,0 mm no. of straightening rolls 7 no. of rolls at in- and outlet 4 roll diameter 80 mm feed length 0 - 500 mm power requirement 10,0 kW weight 10,0 t dimensions of the coil line 8,8 x 4,0 x 2,55 m Straightening machine Dimeco, 1676 EV with inlet table and pre-shaping roll, hydraulic loading bridge Double decoiler Dimeco 2382 FFPS with pneumatic lag brake, hydraulic expansion, hydraulic snubber roll, coil loading device elektronic roll feed Microfeed 1140 E with DC-drive, pneumatic intermediate lifting of the rolls can only be offered without putting into operation - video at seller's site before dismantling available

Year of construction: 2024, operating hours: 1,452 h, condition: like new (used), functionality: fully functional, 1. PRODUCT RANGE (PROFILE TYPES) The line is equipped with tools and rollers for producing all standard wall and ceiling profiles: • Wall profiles: CW50, CW75, CW100 and UW50, UW75, UW100 • Ceiling profiles: CD60 and UD28 2. TECHNICAL SPECIFICATIONS AND PERFORMANCE Production unit (Rollforming Line): • Production speed: * Up to 60 meters/minute (without punching) o Up to 30 meters/minute (with the production of two holes in the profile) • Input material and thickness: Galvanized sheet DX51D+Z (thickness from 0.50 mm to 0.70 mm) • Coil width: Maximum 205 mm • Power consumption and connection: Total power 14 kW (actual consumption approx. 7 kWh), power cable 5x10 • Compressed air requirement: 8 Bar (consumption during operation only 2 l/min, unit capacity 100 l/min) • Layout of the production unit: 15 m (length) x 3 m (width) x 3 m (height) Automatic packing and palletizing unit (Profile Packing System): • Packing speed: 2.5 packs / minute • Length of finished profiles from 2000 mm to 6000 mm • Power consumption of the packing system: Total power 30 kW (actual consumption approx. 12 kWh), 3-phase connection 380 V • Compressed air for packing: 8 Bar (consumption 7 l/min) 3. DETAILED OVERVIEW OF LINE COMPONENTS 1. Uncoiler • Maximum coil width: 205 mm, outer coil diameter up to 1200 mm • Load capacity: up to 2500 kg • Non-motorized system with integrated safety wire mesh fence. 2. Rollforming Machine • Conventional type with roller change (14–15 forming stations) • Shaft diameter: 40 mm | Maximum width between stands: 197 mm • Roller shafts made of hardened and ground steel, supported at both ends. Upper shafts are adjustable according to sheet thickness with a precise Vernier scale. • Rollers made of high-quality alloy steel S 4140, precision machined and heat-treated to a hardness of 55–57 HRC for extremely long service life. 3. Flying Shear Cutting & Punching Unit • Flying shear, mounted on slides and guide rails for translational movement, driven by a servo motor and gearbox. • Knives/blades made of alloy steel for cold working, hardened to 60–62 HRC (exceptionally clean and precise cutting without deformation). • Protected by a safety fence. 4. Automatic Stacking, Strapping and Palletizing System (GHT-SIC-V3) • Automatic profile joining: Connecting system with straps transfers profiles to a group for stacking. Note: Smaller profiles (e.g., UD28), which are not suitable for machine stacking, are simply placed manually on the operator table. • Automatic strapping machine: High-speed brushless motors, speed up to 65 straps per minute, electronic control of tension force (1–35 kg) and control of strap welding temperature (widths 5, 6 or 9 mm). • Automatic electronic palletizer with forks (Mod. 50kg): Fully electronically controlled movement system along all axes via electro-braking drive with inverters (frequency converters), which ensures extremely smooth acceleration/deceleration and gentle handling of packages to prevent material damage. Iedpfx Acjzd Efqjreth 5. Advanced CNC/PLC control system • Built-in components from recognized global brands. • Industry 4.0 (IND 4.0 PLC) controller with simple input of parameters (product lengths, quantities) via a central terminal. • Stepless (infinite) regulation of production speed and perfect synchronization of all machines in the line. • Built-in safety modules (Emergency stop).

Condition: excellent (used), CATALOGUE NUMBER 7817 TECHNICAL DATA DDCA – Double-sided profiling machine - length of moulding 180 – 850mm - width of moulding 30 – 75mm - thickness of moulding 10 – 45mm - spindle diameter 30mm - max. cutter diameter 250mm - 4 cutters included 5 spindles: left side: - 1) vertical upper 2.2kW - 2) horizontal lower 2.2kW right side: - 1) vertical lower 2.2kW - 2) vertical upper 2.2kW - 3) horizontal lower 2.2kW - spindles adjustable up/down, left/right - 2 material clamping devices - stepless feed rate adjustment 0-10m/min - central lubrication via oil pump - pump motor 2.2kW - diameter of dust extraction nozzle 5x100mm - dimensions (L/W/H) 1900x2230x1530mm DDGA – Four-sided planer - width of workpiece 35 – 130mm Itodpfezabhbex Acroh - thickness of workpiece 10-60mm - min. length of workpiece 200mm spindle arrangement: - 1) lower 5.5kW - 2) right 5.5kW - 3) left 5.5kW - 4) upper 5.5kW - spindles adjustable up/down - upper and lower spindle diameter 40mm - right and left spindle diameter 30mm - 4 feed rates 13/20/26/40 - central lubrication of chain via oil pump - diameter of dust extraction nozzle 4x120mm - dimensions (L/W/H) 3200x1370x1830mm DBCA – Profiling machine feeder - max. feed rate 40m/min - max. width of moulding 150mm - motor 0.55kW - overall dimensions (L/W/H) 2320x600x1150 DBGA – Moulding feeder - length of mouldings 200-600mm - width of mouldings 30-20mm - thickness of mouldings 10-40mm - stepless feed rate adjustment 10-40m/min - motor 0.75kW - overall dimensions (L/W/H) 1500x500x980mm - total weight approx. 4900kg Net price: 63900 PLN Net price: 15200 EUR depending on the exchange rate of 4.2 EUR (Prices are subject to change due to exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and names are used solely for informational purposes, to identify the product. We only resell products that the manufacturer has previously placed on the market. We have no business relationship with the manufacturer.

Condition: used, Complete D90 Whey Demineralization Line GEA Nanofiltration + MEGA Electrodialysis Reversal (EDR) Installed • Complete • Available Immediately Ijdpfozff Afjx Acrjth A complete industrial whey concentration and demineralization line available for immediate purchase. The line was commissioned in 2013. It operated for approximately three years and remains installed and connected on site in Lithuania. Designed for the production of high-value dairy ingredients, including D90 demineralized whey concentrate for infant nutrition and specialty dairy applications. Scope of Supply GEA Nanofiltration System (NF) Industrial nanofiltration plant for concentration and partial demineralization of sweet whey. Main Parameters • Feed capacity: approximately 17,000 l/h sweet whey • Extended capacity: up to approximately 24,000 l/h • Concentration from 5.8% total solids to 20% total solids • Approx. 980 m² membrane area • Siemens S7 PLC control system • Siemens MP277 Touch HMI • Installed electrical power: 112 kW • Complete skid with pumps, controls, instrumentation and pipingMEGA / RALEX Electrodialysis Reversal System (EDR) Industrial electrodialysis system for whey demineralization. Included • 2 × MEGA / RALEX EWDU 6×EDR-II/250 modules • Electrodialysis Reversal (EDR) technology • Integrated pH regulation system • Suitable for D90 whey demineralization applications • Designed for large-scale dairy ingredient production Stainless Steel Process Tanks • 3 × circulation tanks • Approx. 20 tonnes each • Stainless steel construction Auxiliary Equipment Included • Heat exchangers • Pumps • Valves • Stainless steel process piping • Electrical equipment and controls • Interconnecting process equipment • Additional auxiliary process components Process Application The line was designed for: • Whey concentration• Whey demineralization • D90 demineralized whey production • Lactose and whey ingredient processing • Infant nutrition ingredient production • Functional dairy ingredient manufacturing Process Flow Sweet Whey ↓ GEA Nanofiltration (NF) • Concentration from 5.8% TS to 20% TS ↓ MEGA Electrodialysis Reversal (EDR) • Deep demineralization to D90 specification ↓ Demineralized Whey Concentrate Current Equipment Status • Installed and connected • Located in Lithuania • Commissioned in 2013 • Operated for approximately 3 years • Production hours to be confirmed • System remains filled with preservation/process liquid and has not been stored dry • Excellent overall condition with limited production history• Available for inspection • Technical documentation available Main Advantages • Complete integrated whey concentration and demineralization solution • GEA nanofiltration technology • MEGA / RALEX electrodialysis reversal technology • Industrial-scale processing capacity • Suitable for high-value dairy ingredient applications • Installed and available for inspection

Year of construction: 2013, condition: used, GEA Sour Cream Thermization Line Capacity: 1,500–2,000 l/h Year: 2013 Installed & Connected – Excellent Overall Condition Complete GEA Process Line We are offering a complete GEA Sour Cream Thermization Line originally designed for the thermal treatment of sour cream and fermented cream products. The line was installed in 2013 and remains installed and connected on site. It is available for inspection and can be offered complete with associated process equipment, automation, and technical documentation. The system was supplied as a complete GEA process line and includes a buffer tank, thermization skid, hot water circuit, CIP dosing system, pumps, valves, instrumentation, and fully automated process control. Main Application Originally designed for: • Sour Cream • Fermented Cream (25% fat) Potential Applications • Kefir • Cultured Buttermilk • Drinking Yogurt • Ayran • Cultured Dairy Beverages • Other fermented and viscous dairy products Process Capacity • Approx. 1,500–2,000 l/h Original Process Parameters • Product: Sour Cream / Fermented Cream (25% fat)• Maximum product viscosity: 230 cP • Feeding temperature: 15°C • Thermization temperature: 55–70°C • Outlet temperature: 20–50°C Scope of Supply 1. Sour Cream Buffer Tank 10,000 L Stainless Steel Insulated Tank • Approx. 10,000 litre capacity • Stainless steel construction • Insulated design • Agitator with 5.5 kW drive • CIP spray balls • Temperature and level instrumentation • Hygienic dairy execution • Complete with service platform and access ladder Manufacturer: • PRO-WAM Year: • 2013 2. GEA Thermization Skid GEA Ecoflex Plate Heat Exchanger System Complete thermization module including: • Regeneration section • Hot water heating section • Cooling section with ice water • Integrated hot water circuit • Stainless steel skid-mounted designMain features: • GEA Ecoflex plate heat exchanger • AISI 316 heat transfer plates • Maximum working pressure: 10 bar • Hygienic dairy construction • Fully integrated process control 3. Pumps & Process Equipment Product Pumps • Tuchenhagen TP centrifugal feed/CIP pump • Tuchenhagen VPSH positive displacement rotary lobe booster pump Process Equipment • Stainless steel process piping • Automated sanitary valves • Distribution valves • Butterfly valves • Temperature instrumentation • Pressure instrumentation • Auxiliary process equipment 4. Hot Water Circuit Complete hot water generation and control package including: • GEA Ecobraze brazed plate heat exchanger • Grundfos circulation pump Ijdpfozffzuex Acreth • Samson steam control valve • Samson on/off valve • Spirax steam equipment • Expansion vessel with safety module • Temperature instrumentation• Pressure gauge 5. CIP Dosing System Integrated CIP dosing and cleaning section including: • Dosing pump • Suction lances with level sensors • Distribution valves • Water shut-off valve • Water reducing valve Designed for automated cleaning and sanitization of the process line. 6. Automation & Control Fully automated process control system including: • Siemens S7-315 PLC • Siemens MP277 10" HMI touch panel • Profibus / Ethernet communication • Automatic thermization control • Automatic CIP control • Alarm management • Process parameter monitoring • Data recording functionality • Festo pneumatic valve island • Stainless steel control cabinets Automation Level • Fully automatic production operation • Fully automatic CIP operation ...

Year of construction: 2004, condition: used, For rounding, backing and casing-in of book blocks in hard, flexible or plastic cases. Alternative gluing, backlining, and headbanding, depending on the equipment of the machine, is possible depending on configuration. Hard cover book line Kolbus BF 527 Year: 2004 - Automatic setting - Co-Pilot with touchscreen - Product counter - Book measuring table - Starfeeder - Pre-heater (hot air) - Rounding and backing station - Glue unit - Excluding gauzing station - Book mark suction device - Glue unit - Head and tail banding station - Pressing station - Casing-in station - Case pre-stacking conveyor - Case bending station - Case forming station - Coldglue circulation pump Building in machine Kolbus FE 604 - Co-Pilot with touchscreen - Automatic setting - Right hand infeed - Integrated hydraulic - Heater monitoring unit - Straight delivery Book stacker Kolbus DS 391 - Compensating stacker - Straight delivery Kolbus: BF 527 Book block format (max): 305 x 375 x 80 mm (WxHxT) Book block format (min): 100 x 100 x 2 mm (WxHxT) Size range opened case (max): 660 x 385 mm Size range opened case (min): 210 x 105 mm Max. mechanical speed: Up to 60 cycles/min Net production is subject to sizes, materials etc. Note!: Specifications are subject to typographical errors and changes in comparable models by the manufacturer! Iedpfox Dkk Ssx Acrjth

Condition: excellent (used), Concept Laser X Line 2000R BC2 Dual Laser Manufacturer: Concept Laser GmbH / GE Additive / Colibrium Additive Type: X Line 2000R BC2 Year of Construction: 2015 Machine Type: Metal 3D printing system Process: LaserCUSING® / Powder bed process Laser System: Dual Laser Material Processed: AlSi10Mg For sale is an industrial metal 3D printing system from Concept Laser. The system was designed for the additive manufacturing of metallic components using the powder bed process and is suitable for research, development, prototyping, and industrial series production. BC2 Upgrade / Modernization The system has been upgraded to the newer BC2 system standard. According to the available documentation, a comprehensive retrofit was carried out, including the replacement of numerous assemblies and components. As a result, the machine has a significantly modernized equipment and system standard compared to earlier X Line 2000R versions. Technical Data Power Connection: 3P/N/PE AC 400 V ±10% Frequency: 50 / 60 Hz Max. Current Consumption: 17 A per phase Compressed Air Supply: 7 - 8 bar Inert Gas Supply: 5 bar Cooling: Water-cooled system Machine Dimensions (approx.): 5,300 x 2,700 x 2,760 mm (L x W x H) Weight (approx.): 13,400 kg Equipment Dual Laser System Powder Handling System Material Feed Filter Units Process Gas Supply Control Cabinet Technology Operating and Control System Work Platform with Access Ladder Water-Cooled Laser System Existing Peripherals as shown in the pictures Documented Service Work 06/2026 Service performed by Colibrium Additive / GE Additive VarioScan system including associated E-box replaced Functional test performed No error messages documented after completion of work Operating Data Laser 1 RET: approx. 26,808 h Laser 2 RET: approx. 38,419 h Note: The RET values describe the time during which the lasers were operational. They do not correspond to the actual exposure or production time. Application Areas Additive Manufacturing of Metal Components Aerospace Industry Automotive Industry Tool and Mold Making Research and Development Prototype Manufacturing Industrial Series Production Scope of Delivery Concept Laser X Line 2000R BC2 Main Unit Powder Handling Components Filtration Technology Existing Peripherals as shown in the pictures Additional accessories according to the existing scope of delivery Itodpfxozcn Efo Acreh Condition Used Machine from industrial production use Laser window clean and clear Optical condition as shown in the pictures Inspection possible by appointment Due to the size and weight, professional dismantling, loading and transport organization are recommended. Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to changes, errors in the technical data and prior sale.

Condition: used, Year of construction: 2011, AABO Powder coating line Iedpfsyrnh Eox Acroth

Condition: new, Allen Bradley 2706-B22J31 DL20 2-line Message Display , 31k Memory, unused in opened original box, 100% functional Itedpfxoi D Tzhs Acreh

Condition: ready for operation (used), LINE TECH PE1.40200FR005.2.02.0F positioning unit SN:64714-9552, used, minor signs of wear, 100% functional, scope of delivery as per photos Iodpfx Acerv Ta Hjrjth

Condition: ready for operation (used), Indramat NFD 01.1-500-180 Power Line Filter (Schaffner FN351H-180-36), very good condition, 100% functional Itodpsi Eblaofx Acreh

Condition: used, Year of construction: 2007, operating hours: 3,339 h, machine/vehicle number: LC615, Used ELOPAK sks-s60S shikoku filling lineTechnical Specifications & Performance DataThis aseptic gable-top carton filling machine is engineered for high-integrity beverage packaging, delivering reliable performance for long-life products. Manufactured by Shikoku Kakoki in 2007, it operates with low accumulated hours and supports multiple carton formats for flexible production planning in industrial packaging and beverage production environments.Manufacturer: Elopak Shikoku KakokiModel: SKS-S60SYear of manufacture: 2007Operating hours: 3339Filling mode: AsepticContainer type: Gable-top cartonsCompatible formats: 0.5L, 0.75L, 1.0LElectrical supply: 400 V, 50 Hz, 3-phaseCurrent draw: 114 ACompressed air pressure: 550–990 kPaAir consumption: 2460 NL/minAdvanced Automation & Control SystemsDesigned for aseptic operation, this machine supports precision filling in a controlled sterile environment. Its three-phase industrial electrical configuration ensures stable operation and straightforward integration with plant utilities. Format changeovers across 0.5L, 0.75L, and 1.0L cartons are engineered to be efficient, helping reduce downtime and improve overall equipment effectiveness in second hand or refurbished installations.Industrial-grade controls for consistent aseptic performanceProcess parameters optimized for sterile packaging operationsOperator-friendly interface for setup and monitoringInterlocked access points and safety circuits for protected operationProduction Line Integration CapabilitiesThis aseptic carton filler integrates seamlessly within a used bottling line or new packaging configuration. It is well-suited for pairing with upstream carton preparation or sterilization modules and downstream cap closing, date coding, case packing, and palletizing equipment. The machine supports inline or standalone operation depending on plant layout.Interfaces with conveyors and downstream packaging machineryFlexible line positioning for greenfield or retrofit projectsMulti-format capability for 0.5L, 0.75L, 1.0L cartonsMachine Condition & Maintenance HistoryWith only 3339 operating hours, this second hand aseptic filler presents low wear relative to typical lifecycle expectations for industrial packaging equipment. Its configuration and utilities align with common European plant standards, supporting rapid recommissioning by qualified technicians.Low operating hours indicating limited duty cycleWell-preserved aseptic configurationOperational Performance & VersatilityOptimized for aseptic beverage production, the machine is ideal for long-shelf-life products commonly packaged in gable-top cartons. Its multi-format capability enables agile product scheduling and SKU changes without extensive retooling.Aseptic filling for extended shelf lifeSupports standard gable... Isdpfx Acsyz R E Tjreth

Condition: used, Used filling line for water for PET containers 5L 800bph This used filling line for water for PET containers 5L 800bph provides a complete solution for processing 5-liter PET bottles, both round and square. Specijalka from Serbia manufactured the line in 2006. Although the owner disconnected it eight years ago, they confirm that it remains in proper condition. Furthermore, you can inspect the line in dry cycle mode. Technical specifications of the filling line The used filling line for water for PET containers 5L 800bph reaches a nominal output of 800 bottles per hour with 5.0-liter containers. Specifically, the system includes a 10-valve rinser, an 8-valve filler, and a 4-head capper, all integrated in a monoblock. Additionally, a cold-glue labeler applies paper labels. As a result, the setup handles rinsing, filling, capping, and labeling in a compact layout. Itsdpfswr T E Djx Acrsh PET bottle production unit In addition to the filling line, this offer includes a semi-automatic PET bottle blower built in 2004. The machine uses two-cavity molds and can produce 800 bottles per hour at 0.5 liters, 600 bottles per hour at 1.5 liters, and 400 bottles per hour at 5 liters. Notably, the system uses water cooling to maintain operational price includes molds for 0.5-liter round bottles and 5-liter square bottles. Consequently, this unit complements the filling line perfectly and allows in-house preform blowing. High-performance compressor for blowing To support the above components, a BOGE compressor from Germany (2006) is also available. It delivers 11 kilowatts of power, 35 bar of pressure, and a flow rate of 1290 liters per minute. Moreover, the system includes a 1000-liter air tank rated for 40 bar. The unit has only logged 500 operating hours. Thus, it remains in excellent mechanical condition. Importantly, this component ensures adequate air supply for blowing PET bottles reliably and efficiently. Technical conclusion In summary, this used filling line for water for PET containers 5L 800bph enables small to medium-sized producers to manage the complete bottling process autonomously. Specifically, the line handles rinsing, filling, capping, and labeling. Meanwhile, the included blower and compressor provide the necessary infrastructure to blow bottles from preforms. Therefore, producers can oversee every phase of water bottling from bottle production to final packaging.  

Condition: used, Year of construction: 2022, functionality: fully functional, COMPLETE SAWING LINE - VTZ 1400 PLUS log band saw with BM 900 chipper canter, including all necessary conveyors - FRC chipping edger with 3D scanning and optimisation, including all necessary conveyors Itjdpfx Asxlym Eecrjh - Automated stacking machine - Waste conveyors

Condition: used, Year of construction: 2023, voltage 400V, 50Hz V current intensivity 40 A Iedpfezbvmhsx Acreth output 15 kw operating pressure 4,5 bar weight 1.600 kg In our assessment, the assembly system is in like-new condition. Technical features: - Assembly system for pressing individual parts into a battery cooling plate - Pressing process using pneumatic cylinders and servo motors - Pneumatic suction of the cooling plate - Siemens control Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: refurbished (used), Year of construction: 2001, Working width 40-170 mm Thickness 9-50 mm 6 operator motors of 7.5 KW each Iedjqa Dq Iepfx Acrsth

Condition: new, Manufacturer: Henkelman Year: 2023 Condition: New Inventory number: 2783 Line consists of: Henkelman double-chamber vacuum machine Type: Titan 2-90 Serial number: HTN10220019 Year of manufacture: 2023 Chamber: 840 x 890 x 220 mm Sealing bar: 2 x 840 mm Cycle: 30 - 50 sec Vacuum pump: Busch 300 m³/h Compressed air: 6 Bar, 100 Nl/min Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2450 x 1100 x 1150 mm Weight: 850 kg Automatic lid and conveyor belts Inclined conveyor belt Type: 12980-10 Serial number: 790311 Year of manufacture: 2021 Belt width: 600 mm Length: 3000 mm Henkelman shrinking tank Type: 200A Itodpfx Ajzclkxjcrjh Serial number: H0D20220008 Year of manufacture: 2022 Heating: electric Usable space: 575 x 1100 mm Immersion depth: 200 mm Cycle time: 22 sec. Compressed air: 6 Bar, 50 l/min Power: 3 x 400V, 50Hz, 23kW Dimensions: 1200 x 2500 x 1350 mm Weight: 310 kg

Condition: like new (used), Year of construction: 2023, operating hours: 30 h, functionality: fully functional, machine/vehicle number: JSUP-1703, PAPER STRAW PRODUCTION LINES FOR BEVERAGE CARTONS (U-SHAPE & I-SHAPE) Location: Poland (European Union) Manufacturer: Zhejiang Jinshen Machinery Manufacture Co., Ltd. Year of Manufacture: 2023 Condition: Excellent – Installed, commissioned, tested and fully operational Availability: Immediate Complete Turnkey Production Solution for Beverage Carton Paper Straws Unique opportunity to acquire two nearly new production lines for paper straws used in aseptic beverage cartons (milk, juice and beverage packaging). The equipment was professionally installed and successfully commissioned in Poland. All machines are fully functional and available for immediate inspection. Line 1 – U-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Flexible straw forming machine JSFP-2021-30 U-shape automatic packing machine JSUP-1703 Microwave dryer 2 × circulation heaters Carton filling machine Conveyor assembly line Vision inspection system Capacity: up to 600–800 pcs/min Itedpfx Acozb Uwlorsh Suitable for beverage carton applications requiring individually packed U-shaped paper straws. Line 2 – I-Shape Paper Straw Production Line Complete automatic production line including: Paper straw making machine JS-PT22-2010F Microwave dryer Vision inspection system I-shape straw packing machine 2 × carton filling machines Capacity: up to 800–900 pcs/min Designed for straight paper straws used in beverage carton packaging systems. Advantages ✅ Machines located in the European Union ✅ No waiting time for production in China ✅ No import duties or overseas shipping delays ✅ Installed and successfully tested ✅ Immediate availability ✅ Modern Delta PLC control systems ✅ Vision inspection systems included ✅ Suitable for food-grade production Technical Highlights Straw diameter: 3.0 – 8.0 mm Production speed: up to 100 m/min PLC control: Delta HMI touch screens Ethernet communication Automatic counting and monitoring Food-grade manufacturing standard Remote maintenance capability Ideal For Paper straw manufacturers Beverage packaging suppliers Dairy packaging producers Contract packaging companies Investors entering sustainable packaging markets Sale Options Complete package (both lines) U-shape line separately I-shape line separately Inspection The equipment can be inspected under power at our facility in Poland. Additional photos, videos, technical documentation and machine specifications are available upon request. Contact METALTON Sp. z o.o. Poland For detailed information, pricing and viewing appointments, please contact us directly. Keywords: Paper Straw Machine, U Shape Straw Machine, I Shape Straw Machine, Tetra Pak Straw Production Line, Beverage Carton Straw Line, Paper Straw Packaging Machine, Sustainable Packaging Equipment, Straw Manufacturing Line, Beverage Packaging Machinery.

Year of construction: 2021, condition: good (used), 1 complete granulation line, cutting/compacting/extruder combination, tangential, since 2021 only operated in a single shift using production waste, including DPE ground material/aluminum (pipe material). System consisting of: Hydraulic roller cutter, 140 cm width, for roller diameters up to 60 cm, 18.5 kW drive. Erema conveyor belt with metal detection bridge, 900 cm x 110 cm, with timer. Wagner WS30 shredder, 30 kW, rotor width 140 cm with hydraulic slide, rotor with 74 reversible cutting blades, discharge and inclined conveying screw. Roller feed for heavy rolls with cutting device in the longitudinal direction to relieve the mill, frequency inverter-controlled drive, 3.5 kW. Cutting mill with 11 kW, downstream for parallel operation with shredder/roller feed, suction/conveying fan to the buffer silo with agitator, frequency inverter-controlled for discharge rate/dust protection. Feed screw for ground material. Conveyor belt, L 9 m x W 80 cm, metal detection bridge, frequency inverter controlled via load detection from the cutting compactor. Conveying screw for 100% ground material, stainless steel, L 4.5 m and diameter 100 mm. Iedjzb Dr Sopfx Acreth Cutting compactor, 138 kW, frequency inverter controlled, suction fan, water spray cooling, tangential to extruder ES 180 mm 30 LD with 2-stage vacuum degassing, including: Laser filter LF with diameter 500 mm / 2-disc system, discharge screw for contaminants with timer, melt pressure sensor, spare screens: 60 mesh 2x, 70 mesh. Strand die, 26 holes - interchangeable dies, year of manufacture 2021, melt pressure sensor, complete overhaul/replacement of wear parts in January 2026. Strand cooling water tank, L 700 cm x W 70 cm, stainless steel. Strand rollers made of plastic with stainless steel ball bearings, height-adjustable, year of manufacture 2023. Strand granulator SG 200 E with 7.5 kW as well as 1 spare granulator 5.5 kW for quick replacement during overhaul or cleaning/maintenance work. Granulate classification sieve, stainless steel, including conveying fan and pipes. BIG BAG filling frame, 2-place, with ladder and platform. BIG BAG floor scale with receipt printer. Throughput material-dependent, up to 900 kg/h. Start-up, commissioning by our technicians, details and costs upon request - after consultation. Inspection in Wuppertal, appointment can be arranged shortly.

Year of construction: 2021, condition: good (used), functionality: fully functional, 1 complete granulation line, partially overhauled and expanded in 2025, consisting of: Conveyor trough with screw (level-controlled) for 100% ground material or additive, feed screw with mixing paddle and color dosing, frequency-controlled Buffer silo for film with agitator and frequency-controlled rotary valve, as well as an agitator in the stuffing unit with load monitoring and reverse operation (adjustable) RCP horizontal stuffing unit 15 A for film and ground material, frequency-controlled. Extruder 120 mm - 38 LD - vacuum degassing (water ring) Year of construction 1996 - screw new in 2026 / heaters new / cooling fan new 180 kW - DC (frequency inverter 180 kW as a spare) Laser sieve Kitech with 60 mesh, diameter 350 mm Control via control cabinet, year of construction 2025 Strand die with 26 holes, closable and adjustable for different materials using variable screw-in nozzles Strand cooling water tank with new stainless steel bearings in plastic rollers Strand blower Strand granulator SG 200 Kitech, with 5 kW drive - frequency-controlled Granulate classifying sieve and conveyor blower with pipelines BIG BAG filling station with closure for Big-Bag change Commissioning by our technicians, details and costs upon request. Isdpfx Acjzb Dp Rereth Inspection in Wuppertal, appointment available on short notice.

Condition: excellent (used), Year of construction: 2004, T-Die Serial No.: L 1081-041391 // Calender Serial No.: F 1201-041392 Haul-Off Serial No.: F 1201-041392-T Max. winder speed: 50 m/min Type: Film system 1080 mm usable width Equipment / Additional information: Max. gross output PP up to 1000kg/h with film width up to 1200mm A special feature is the winding system, which can cut narrow films (150 mm - 100 mm) or for example 8 x 175 mm or even 2 x 700 mm one nozzle lip with a max. film thickness of 2mm up to 1000kg/h. Total power consumption: 211 kW/h Main engine power: 250 kW Min. 068 mm film thickness in PS / min. 0.75 mm in PP Maximum calender speed: Max. 50 m/min. mechanically possible Consists of: -Dosing system 5-chamber Maguire Isdpfx Acew Tbr Horoth -Extruder (160 mm screw) Amut EA 160 // Age: 2003 -Screen changer (for cleaning in food production) -Melt pump -Slot die (1 insert) 120 cm -Lip with max. film thickness up to 2mm up to 1000kg/h -Calender 140 cm -Thickness gauge SBI TMD-EC/140.20.200.R -Post-cooling rollers (4 pcs.) -Winder (Film jam during roll jam) -Cutting machine & film tensioner -Film winders (3 pcs.) -Mill MAZZA CBS 25 40 2T18 // Age 2003 Fully existing infrastructure; control cabinets, pumps, etc.

Condition: used, Year of construction: 1998, functionality: fully functional, For sale: Coil metal decoiling, slitting, and recoiling line Condition: used, connected – available for live demonstration. Designed for coil metal decoiling, precise slitting into narrower strips, and recoiling into smaller coils. Technical specifications: Year of manufacture: 1998 Made in: Poland Max. metal width: 1250 mm Knife pairs: 5 Longitudinal slitting, steel: min 0.4 mm / max 1.2 mm Film application function Scrap cutting guillotine Line includes: Decoiler 5 T Recoiler 5 T Multi-knife disc shears Itodjxlcp Nepfx Acreh Braking and separating segment Turnstile with separator Control panel Purpose: The line is intended for preparation of coil metal for further processing: decoiling, precise longitudinal slitting, recoiling into smaller coils. If you have further questions – we will be happy to assist you.

Year of construction: 2015, condition: used, W and C Profile Production Line for Sale Designed for the production of road barriers, posts, and fastening elements. Fully equipped line suitable for continuous industrial manufacturing. Isdpfx Aexhf R Iocrjth The line consists of: - Two decoilers - Post production line - Parapet (guardrail) production line - Two presses for fastener manufacturing Technical specifications: Length: 17 m Width: 1 m Height: 1 m Motor power: 22 kW Weight: 18 t Year of manufacture: 2015 Manufacturer: Chengxing Machinery (China) Purpose and advantages: This W and C profile production line is designed for manufacturing various road safety components: detachable road barriers, support posts, and fastening parts. The equipment ensures a reliable, stable, and consistent production process. The machine is available for inspection. If you have any further questions, please do not hesitate to contact us.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Sheet metal width: 2050 mm Sheet metal thickness: 4 mm Stroke: 41 mm/min Ijdpfozbarnox Acrjth Table height: 850 mm Machine weight (approx.): 2,900 kg Dimensions: 2700 x 2200 x 1400 mm

Condition: used, machine/vehicle number: 007928, Position 1: Brushing Machines CEFLA-EASY 2000 + TR2V-FV3 Ijdpjwu Ackjfx Acrsth Position 2: spraying machine CEFLA-EASY 2000 + TR2V-FV3 Position 3: Ovens CEFLA-EASY 2000 + TR2V-FV3