Used Filtration System for sale (843)

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: a) 1 cartridge dry filter, type PF 2.16.B250 for 30,000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve or rotary valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of filter cartridge cleaning. Maintenance doors as swing doors Maintenance easy. Iedpfxow Ivqms Ac Asik

Year of construction: 2003, condition: excellent (used), functionality: fully functional, Leistritz 4/140 – Double piston screen changer for continuous operation. Especially suitable for heavily contaminated material. Materials that can be filtered: LDPE, HDPE, PP, PS, ABS Year of manufacture: 2003 Capacity: 800–1000 kg/h Ijdjw Ea Irepfx Ac Ajik 4 screens – two per piston. Diameter of each screen: 140mm (two are always in use, total 280mm) Hydraulic unit: 1.5 kW Heater: 16 kW

Condition: good (used), Year of construction: 2009, Dust extraction,filtration,welding fume extraction,self-cleaning cartridge filter,pneumatic,vacuum TEKA AIRTECH P24 The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system Iodpfx Acjl Dw U Dj Aoik "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 24 000 m3/h Motor power - 15 Kw Fan in sound-absorbing housing Control cabinet with electrical documentation Year of production - 2009 Dimensions: Height - 6.80 m Base width - 1.95 m x 1.90 m Total width - 3.60 m x 2.00 m We have several pieces on offer. The price given in the ad for 1 piece.

Condition: used, Year of construction: 2003, functionality: fully functional, tank capacity: 164 l, operating pressure: 6 bar, TECHNICAL SPECIFICATIONS - Year: 2003 - 1 housing with 6 cartridges - 2 housings with 3 lenticulars - Housing : BEGEROW Iedpfewal Dnjx Ac Aoik - Housing type : M0340650 - Max. working pressure 6 bar - Max. operating temperature : 120 °C - Volume : 164 litres - Inoxpa wine pump - Dosing pump - Automatic

Condition: used, Year of construction: 2015, Pentair BMF-Skid (with 18 modules) for beer filtration. Ideal for expanding existing systems or setting up a new filtration system. Additional title: Beer Membrane Filtration (BMF) Max. capacity: 100 hl/h filtrate, depending on beer quality Flow rate: 330 m3/h un-filtrate pump Flow pressure: 1 bar un-filtrate pump Iijdpfx Acsw Ea Eks Aek Number of modules: 18 pcs. Length: approx. 5500 mm Width: approx. 1500 mm Operation / Control: ProfiBus connection to a central PLC Base construction: Module frame-mounted Features: 1 x BMF Skid, with 18 membrane modules; filtrate pump

Condition: used, Extraction system, central extraction system, room air filter system ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of construction approx. 2005 Volume flow approx. 5000 m³/h Extraction connection at filter inlet 1200 x 150 mm Exhaust air connection at filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 Volt, 50 Hz - Control cabinet for wall mounting - Pocket filter - Maintenance flap for filter change - Radial fan on top of the unit Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition Iedoicic Hjpfx Ac Asik

Condition: used, Year of construction: 2014, Overview  The Millichilling ST-12, manufactured in 2014 by Millipore Ibérica S.A.U., is a stainless-steel normal flow filtration (NFF) unit designed for wine clarification prior to microbiological stabilization. It offers a cost-effective, environmentally friendly alternative to diatomaceous earth filters, preserving the wine’s sensory characteristics while supporting continuous operation. This unit is suitable for medium to large-scale wineries and is immediately available. Technical Details  Capacity: 1,000–1,500 l/h (depending on wine turbidity) Total Volume: 81 L Applications: Final wine clarification before bottling — suitable for white, rosé, and red wines Construction Material: Stainless steel Max Operating Pressure: 5 bar Max Temperature: 110 °C System Type: Normal Flow Filtration (NFF) Operation Modes: Automatic, semi-automatic, or manual Design: Fully enclosed system with integrated reverse-flow cleaning   Iijdpfx Aew Nkqqec Aok

Condition: used, This listing is for a Millipore Pro Flux M30 Tangential Flow Filtration (TFF) System. The unit is in full working condition and is ready for immediate release. The Millipore Pro Flux M30 is a high-performance tangential flow filtration (TFF) system designed for demanding applications in the biotechnology, pharmaceutical, and molecular diagnostics sectors. Optimized for crossflow filtration, the M30 provides reliable separation, concentration, and clarification of biomolecules and cell suspensions in both R&D and process-scale environments. With its robust stainless steel construction, precise transmembrane pressure (TMP) control, and compatibility with a wide range of membrane chemistries, the M30 delivers consistent performance across various filtration tasks—from protein concentration and virus clarification to cell culture harvest and synthetic biology sample prep. Key Features Stainless Steel Construction – Durable, sanitary design for aseptic operation and long-term reliability. Optimized TMP Control – Ensures maximum membrane efficiency and longevity through precise pressure regulation. Broad Membrane Compatibility – Supports a variety of membrane types and molecular weight cut-offs for flexible application use. Process Versatility – Suitable for concentration, diafiltration, and clarification steps in upstream and downstream workflows. Compact & Scalable – Ideal for laboratory-scale operations with scalability to pilot and production environments. User-Friendly Interface – Intuitive controls and gauges for straightforward operation and monitoring. Iiedpexl Dx Sjfx Ac Ask Technical Specifications Model: Pro Flux M30 Flow Configuration: Tangential Flow / Crossflow Material of Construction: 316L Stainless Steel Pump Type: Peristaltic or Diaphragm (depending on setup) Pressure Control: Manual and/or automated transmembrane pressure regulation Operating Pressure Range: Typically up to 4 bar (60 psi) Filter Compatibility: Millipore Pellicon, Ultracel, Durapore, and other cassettes Tubing & Fittings: Sanitary-grade with tri-clamp or Luer lock connections Footprint: Compact benchtop design Manufacturer: Millipore (now part of Merck Millipore) Applications Biopharmaceutical Processing – Protein concentration, buffer exchange, and virus removal. Cell Culture Harvesting – Clarification of cell suspensions post-fermentation or bioreactor. Synthetic Biology – Preparation of cell-free extracts, nucleic acid concentration, and purification. Gene Editing & Molecular Cloning – Sample concentration and buffer exchange before downstream analysis. Diagnostics Manufacturing – Filtration of assay components and reagent prep for diagnostic kits. Fluorescence & Imaging Sample Prep – Ensures clean, debris-free samples for accurate analysis. Benefits Reliable Performance – Delivers consistent and reproducible results for critical bioprocess steps. Process Flexibility – Adaptable to a wide range of biomolecule sizes and sample types. Aseptic Operation – Designed for cleanroom and GMP environments. Low Hold-Up Volume – Minimizes product loss during filtration. Trusted Brand – Developed by Millipore, a global leader in membrane filtration technologies.

Condition: good (used), Year of construction: 2010, Dust extraction,filtering,welding fume extraction,self-cleaning patron filter,pneumatic,vacuum TEKA AIRTECH P18. The main areas of application for the systems are industrial plants/welding shops where it is where it is not possible to realize spot extraction point extraction or where point extraction is not sufficient to maintain clean air on the shop floor. Side-mounted ducts with point capture point sucks in contaminated air air and lead it to the filter section. Here, contaminants in the form of fine particles cover the surface of the filter patron filter. An administered pulse of compressed air cleans the cartridge filters, automatically at the required intervals. After the impact of the compressed air, the particles collected on the surface of the filters break off off and fall into the dust tank. Iijdsib Dadspfx Ac Aek The cleaned air is returned to the work room through individually adjusted long-range nozzles. At the same time ejection of the purified air directs the contaminated air of the hall towards the toward the extraction channels. Filter cleaned by microprocessor controller with compressed air pulses during operation, thus high efficiency of the device. Low demand for compressed air thanks to the system "Power-Spray" The AIRTECH unit series is certified by IFA in accordance with EN ISO 15012- 1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a permanent local extraction device of welding fumes. Parameters: Capacity - 18 000 m3/h motor power - 11Kw vacuum - 2250 Pa Filtration area - 324 m2 ( 9 filter cartridges 36m2 each) Fan in sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Year of production - 2010 Dimensions: Height - 5.00m Base width - 1.44m x 1.44m Width with outlet channels - 8.5m Total weight about 2400 kg

Condition: ready for operation (used), Year of construction: 2016, Three filtration systems LTA AC 3002-R are available. Power: 1380VA, output voltage: 11kV, frequency: 50/60Hz, power connection: 2.6A, weight: 2x 130kg, 1x 135kg. An on-site inspection is possible, the systems have already been dismantled. Iiodpfx Asxc Nkbjc Aek

Year of construction: 1995, condition: used, This filter system may only be used to filter preclarified products that have normal filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 °C): min. 150 hl/h Iijdsvcqv Nopfx Ac Ajk Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: used, Filter system - extraction system, central extraction Cartridge - pulse filter VALCO type Pidclean 4N Central welding fume extraction system Series. No.: 15003 Year of construction 2003 Volume flow max. 3500 m³/h Filter area 92.8 m² Differential pressure 700 Pa Suction connection at filter inlet Ø 250 mm Exhaust air connection at filter outlet 225 x 160 mm Compressed air requirement 4 to 6 bar Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - AUTEL filter control unit, type Eco S6 - Pneumatic filter cleaning, automatic via control unit - 4 cartridge filters Ø 350 x 660 mm Isdpemquwqefx Ac Aeik - Maintenance flap for filter change - Radial fan on top of the system - Removable dirt collection container approx. 40 liters - Silencer for fan outlet, Ø 250 mm - Electrical diagram and operating instructions for the control unit available Space requirement L x W x H 2150 x 1350 x 2560 mm Weight approx. 550 kg Good condition

Year of construction: 2024, condition: new, Mechanical double juice filters are made of stainless steel. The set includes two parallel stainless steel filters that can work separately one from each other. The double juice filters filtrate the juice and eliminate various thick particles in it. This provides particularly clean juice. The valves of the filters can also be shut off separately during the washing process or for other purposes. Available mesh: 60 µm, 200 µm, 300 µm, 400 µm, 500 µm. Connection D25. Capacity: 2000 L/h. Stainless steel ensures longevity as well as quality of the product. Iodehu Aafopfx Ac Asik Stainless steel filters are easy to clean after using.

Condition: used, This listing is for the Millipore MpodPilot Enerpac Pilotscale filtration system Iodpfx Ajxhgaqsc Asik The unit is in full working condition and is ready for immediate use The Millipore MPODPILOT is a pilot-scale filtration system designed for laboratory and pilot plant applications. It is commonly used in processes such as microfiltration and ultrafiltration, particularly in the pharmaceutical and biotechnology industries. The system typically includes a filter holder capable of accommodating pod filters up to 2.2 m² in size, and it is often paired with a hydraulic hand pump for operation

Condition: used, machine/vehicle number: 01, space requirement width: 850 mm, overall weight: 562 kg, total length: 1,700 mm, total height: 1,900 mm, GAF bag filter, container capacity 200 liters, double-jacket capacity 30 liters, permissible operating pressure container 10.5 bar, permissible operating pressure double-jacket 5 bar, operating temperature 150 °C, material in contact with the product stainless steel 1.4435 (V4A). The filter is mounted on a galvanized steel trolley with wheels. Isdjvt Tg Sepfx Ac Aeik

Year of construction: 2007, condition: ready for operation (used), Filtration surface: 224m², documentation available. Iiedpfx Asgi Nw Sjc Ajk

Year of construction: 2001, condition: used, The Pall CFS system is designed as a single unit and can be installed directly in front of the filling line without the need for a buffer system. It is a completely independent process unit consisting of the following components: filter vessel Piping and connections Membrane cleaning system (CIP) integrity check Switchboard The hygienic design, the simple integrity test and the full automation ensure the microbiological safety of the system and usually allow the operation of the filling staff. Cluster filtering groups filter elements into clusters. Each cluster has its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization and integrity testing are performed per cluster. Advantages of the CFS principle; Longer life Integrity testing on site Integrity diagnostics per cluster Special rinsing High specific flow rate Short flush times Constant flow in all candles Minimal water consumption Quick replacement of filter elements Controlled backwash Minimal beer loss High biological safety Constant availability With this filter system only preclarified products may be filtered, which have normally filterable properties in their composition. Max. filtration flow: 400 hl/h continuous Permissible operating pressure: 6 bar Permissible operating temperature: 105 °C Volume: 1456 l Current: 10 A Iiodpfovcqx Dsx Ac Aok Voltage: 220 V Water: cold water: min. 150 hl/h; hot water (max 65 ° C): min. 150 hl/h Compressed air: prepared compressed air: 4 - 6 bar; control air: 5 - 8 bar Length: 1,40 m Width: 1,20 m Height: 1,85 m Weight: 3450 kg Base construction: basic frame with control and measuring components and filter container; cleaning module Features: 98 filter cartridges, 3 piston diaphragm pumps (Dosage), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductance), various valves, control cabinet

Condition: used, Welding fume extraction unit for wall mounting, KEMPER extraction device Type 85400 Serial number: 279092 Year of manufacture: 1997 Volume flow: 1700 m3/h Static pressure: 2000 Pa Extraction connection: Ø 250 mm Motor power: 1.5 kW Power supply: 400 Volts, 50 Hz - Radial fan - Designed for a mechanical air filter with approx. 99% separation efficiency - Main filter defective (surcharge for new main filter: EUR 195 net) - Articulated extraction arm Ø 150 mm, approx. 2 meters long - Extraction pipe with 3 joints and extraction hood (adapter connection to filter housing missing) - No external control unit, without filter monitoring, without start switch - Air outlet: 250 x 140 mm Iiedpfx Asu S Tfgjc Aek Required space (L x W x H): 680 x 660 x 1100 mm Weight: approx. 120 kg Good condition Surcharge for new main filter: EUR 195 net

Condition: good (used), Year of construction: 1983, functionality: unexamined, 2 pieces Iijdpfx Aor Nvg Sjc Ask 1x Alfa Laval H10-RC 1x Alfa Laval H10

Year of construction: 2002, condition: not inspected (used), Project number: 920239 Ijdpfx Ajl Tm R Isc Aoik Year of construction: 2002 Kettle: 280 litres, double jacket Heating: steam Weighing cells: Tedea-Huntleigh max 300kg Pump: Unibloc-PD displacement pump Flow meter: Endress + Hauser promass F Indicator: Ian Fellows LUCID-76711 Recorder: Eurotherm Chessell paperless graphic recorder Measuring device: Knick Stratos 2401 Cond Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 1200 x 2000 mm

Condition: new, Year of construction: 2018, Behncke SFA 600B AFM with TLS - with filter material Iijdew U Su Ispfx Ac Aok - slight storage marks - shipping possible at extra cost

Condition: excellent (used), total width: 1,450 mm, total length: 1,550 mm, total height: 2,500 mm, Ruwac filter system Used goods, good condition, see pictures Length 155 m Isdpfx Ajtwy Rvec Aeik width 145 cm Height 250 cm 2850 rpm 2 pieces in stock. Bargaining price: € 1.400,-- net ex stock Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Constantly over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock)

Condition: ready for operation (used), Year of construction: 2010, A Donaldson filter system including a cyclone with fan is available. 1) Donaldson DFO 4-16-Rm filter unit, year of manufacture: 2010, power: 18.5kW, weight: approx. 1600kg. 2) Cyclone with Donaldson/Rucon FQ 561/N4 RD 0 centrifugal fan, year of manufacture: 2010, speed: 2920 rpm, temperature: 60°C. The filters are somewhat corroded. Documentation available. On-site inspection is possible. Iijdpowzx S Uefx Ac Aok

Condition: new, Year of construction: 2025, functionality: fully functional, volume flow: 30,000 m³/h, Sleeve filter - galvanized metal structure - air flow rate 30,000 m3/h filter cleaning in backwash with air jet with control unit (new control unit, new solenoid valves) n. 216 ANTISTATIC sleeve filters n.01 decantation chamber dimensions 4500 x 2400 x h6000 mm n.03 ATEX explosion-proof ventilation panels - new - horizontal positioning - Ijdpev Ny Rpofx Ac Aeik filtered material discharge: screw, rotary valve - new - upper safety guardrail ladder electric control and start-up panel n.01 37 kw electric aspirator COMPLETE WITH CE DOCUMENTATION - USE AND MAINTENANCE MANUAL

Condition: ready for operation (used), Technical characteristics 42 filter bags, length 2400 mm, ⌀ 250 mm Sluice 0.55 kW, ⌀ 220 mm, dimensions: 500 x 280 mm ATEX fan 15 kW, ⌀ inlet / outlet 400 mm Filter area : 90 m2 Flow rate : 13000 m3/h Isdpst U Uf Isfx Ac Asik Electrical cabinet Power and Motors Pluging: Three-phased Overall dimensions