Used Fine Structure for sale (4,016)

Condition: good (used), Bracket, holder, support block, retaining support for conveyor belt, belt conveyor, transport belt, belt conveyor, roller conveyor -Support stand: height-adjustable, swiveling -Height: up to approx. 650 mm -Width: 550 mm -Dimensions: see photos -Number: 12x holders available Price: per piece -Overall dimensions: 665/150/H650 mm -Weight: 15.3 kg/pc. Laedpfx Aceh Eciroksb

Year of construction: 2023, condition: new, PVS Horizontal Microcutter Koloidmill Start by 15 KW up to 30 KW other Modells we can offer Lajdpfx Acji Hi R Deksb

Year of construction: 2003, condition: good (used), Type: TLI 4500/2044 Ledpfxshyhlkj Ackoab Device no.: 03502 Year:2003 unit height: approx. 4500 mm unit width: approx. 2000 mm unit depth: approx. 7010 mm Number of rolls: 44 Roll width: approx. 1680 mm shelf load: 150 kg Total load: 7000 kg superstructure see photo 3000 mm Color: beige

Condition: ready for operation (used), Year of construction: 1986, machine/vehicle number: 97862034, functionality: limited functionality, pressing force: 100 t, stroke length: 50 mm, working width: 180 mm, installation height: 255 mm, sheet thickness (max.): 5 mm, TECHNICAL DETAILS Press force: 100 t Total force: 1,000 kN Ring tooth force: 40 - 310 kN Counterholder force: 10 - 270 kN Max. material width: 180 mm Max. material thickness: 5 mm Stroke rate (min.): 20 rpm Stroke rate (max.): 80 rpm Stroke: 50 mm Feed unit Max. strip thickness: 5 mm Max. strip width: 180 mm Max. feed length per ram stroke: 999.9 mm Tensile force per feed (starting force): 6 kN Clamping force: max. 19 kN Max. feed height adjustment: +40 mm Max. distance between feed rollers: 20 mm Resolution, related to rollers: 0.1 mm MACHINE DETAILS Input voltage: 400 V Input frequency: 50 Hz Connected load: 13.5 kW Pump power: 3 kW Motor power: 3 kW Air connection: 6 bar Height adjustment type: hydraulic Dimensions & weight Dimensions (H x W x D): 2,420 x 2,325 x 1,665 mm Installation height: 255 mm Weight: approx. 6 t Lodpfx Acjytcd Rskeab Year of last overhaul: 1997 EQUIPMENT Decoiler unit Two sets of tools Note: Further technical data for the machine can be found in the attached operating manual. The seller has repeatedly experienced issues with the processing and blow-off cycle. As a result, parts were not cleared out and the machine was stopped for safety reasons. However, the seller assumes this is merely a matter of adjustment. The seller recommends an overhaul of the control system in the long term.

Condition: new, functionality: fully functional, overall weight: 26,000 kg, Year of construction: 2026, warranty duration: 36 months, Equipment: crane, cruise control, parking heater, seat heater, trailer coupling, DAF XF 530 FAT with front crane Fassi F255 A, leading axle, valid until 2026! Lodpfex Ekddjx Acksab

Condition: new, power: 75 kW (101.97 HP), Year of construction: 2026, An impact crusher is a machine that uses striking as opposed to pressure to reduce the size of a material. Impact crushers are versatile and widely used in various industries for the crushing of hard, abrasive materials. They operate by applying force on the material to be crushed, breaking it into smaller pieces. Here is a general introduction to impact crushers: The impact crusher is a versatile machine used for various applications in construction, mining, and recycling industries. Below are some of the key applications of an impact crusher: 1. Primary and Secondary Crushing Impact crushers are commonly used in both primary and secondary crushing stages. In primary crushing, they break large rocks into smaller, more manageable sizes, and in secondary crushing, they refine the material further into smaller grades. 2. Production of Aggregates Impact crushers are widely used in the production of aggregates for construction. They are effective at producing a wide range of materials, including: Crushed stone for road construction. Sand for concrete and asphalt production. Gravel for general construction and drainage. 3. Recycling One of the most significant applications of impact crushers is in the recycling industry, especially for processing construction and demolition (C&D) waste, which includes materials like concrete, brick, and asphalt. The crushers help convert waste into usable products such as: Recycled concrete aggregates (RCA). Asphalt. Recycled sand and gravel. 4. Mining Industry Impact crushers are used in the mining industry to process ore materials. These crushers help break down large rocks and ores into smaller pieces, making them easier to process for extraction of valuable minerals like gold, copper, and other metals. 5. Production of Manufactured Sand In the production of manufactured sand for concrete, impact crushers are used to break down larger rocks into fine particles, which are then used as an alternative to natural sand. This is especially useful in areas where natural sand is scarce or environmentally protected. 6. Construction and Road Building Impact crushers are integral in the production of materials for road construction, such as base and sub-base materials. These materials are crucial for the stability and durability of roads, highways, and foundations. 7. Industrial Applications Lasdpfoq I N Iqox Ackeb Impact crushers are also used in various other industrial applications, such as: Cement production: Crushing limestone and other materials for cement manufacturing. Glass recycling: Breaking glass waste into smaller pieces for recycling. 8. Demolition and Dismantling Impact crushers are used in demolition projects where buildings or structures need to be demolished and the materials crushed for reuse or disposal. They help reduce the size of debris like concrete, asphalt, and bricks into smaller, manageable pieces.

Condition: new, Year of construction: 2026, Cone Crusher: Types, Features, and Applications Cone crushers are essential equipment in the mining, construction, and aggregate industries. They are designed to crush hard and medium-hard materials such as granite, basalt, iron ore, and limestone into smaller, uniform sizes. This article explores the different types of cone crushers, including spring cone crushers, compound cone crushers, and Symons cone crushers, and provides insights into choosing the right cone crusher for sale. What Is a Cone Crusher? A cone crusher is a compression-type machine that reduces material size by squeezing it between a moving piece of steel (the mantle) and a stationary piece (the concave). The material is crushed as it moves downward through the chamber, achieving fine and uniform output. Cone crushers are widely used in secondary, tertiary, and fine crushing stages. Spring Cone Crusher The spring cone crusher is one of the earliest and most traditional types of cone crushers. It uses a spring system to protect the crusher from damage when uncrushable materials enter the chamber. Key features include: Reliable structure and low maintenance Adjustable discharge size for different crushing requirements Overload protection through the spring safety system Suitable for medium and fine crushing of various ores and rocks Spring cone crushers are ideal for small to medium-scale operations that require stable performance and cost efficiency. Compound Cone Crusher The compound cone crusher, also known as the combination cone crusher, integrates the advantages of both spring and hydraulic cone crushers. It features a robust design and high crushing efficiency. Main characteristics include: High crushing ratio and uniform product size Hydraulic cleaning system for easy maintenance Strong adaptability to different materials and production conditions Energy-efficient operation This type of cone crusher is widely used in mining, metallurgy, construction, and chemical industries, offering a balance between performance and affordability. Ledpfxsq Nd Ndj Ackeab Symons Cone Crusher The Symons cone crusher is a classic model that has been used for decades in the mining and aggregate industries. It is known for its simple structure, reliable performance, and high productivity. Key advantages include: Stable operation and long service life Uniform particle size distribution Easy adjustment of the discharge opening Low operating cost Symons cone crushers are available in several models, including 3ft, 4ft, 4¼ft, 5½ft, and 7ft, to meet different capacity requirements. Cone Crusher for Sale When selecting a cone crusher for sale, several factors should be considered: Material hardness and abrasiveness – Choose a crusher designed for the specific material type. Production capacity – Match the crusher size and power to the required output. Automation and control systems – Modern cone crushers offer hydraulic and PLC systems for easier operation. After-sales service and spare parts availability – Reliable support ensures long-term performance. Henan Mingyuan Heavy Industrial Equipment Co., LTD offers a wide range of cone crushers, including spring, compound, and Symons models. Each machine is built with high-quality materials and advanced technology to ensure efficient and durable performance.

Condition: new, functionality: fully functional, Year of construction: 2026, A stone crushing plant for sand and aggregate making is a facility where stones and rocks are crushed into smaller pieces or gravel. It typically includes several stages of crushing and screening to produce various sizes and grades of sand and aggregate materials, which are essential in construction, landscaping, and other applications. Here's an introduction to the components and processes involved in a typical stone crushing plant: ### Components of a Stone Crushing Plant 1. Primary Crusher: - Purpose: The primary crusher, often a jaw crusher or gyratory crusher, initially breaks down large rocks into smaller pieces. - Function: It handles raw materials from the quarry or mine and prepares them for further processing. 2. Secondary Crusher: - Purpose: A secondary crusher, such as a cone crusher or impact crusher, further reduces the size of the crushed stones. - Function: It refines the material after primary crushing, producing smaller and more uniform-sized aggregates. Lodpfx Acsq N U Duekoab 3. Tertiary Crusher (Optional): - Purpose: In some configurations, a tertiary crusher like a vertical shaft impactor (VSI) may be used for shaping and fine crushing. - Function: It produces finely crushed materials for specific applications, such as concrete production or road base. 4. Screening Equipment: - Purpose: Screening equipment like vibrating screens or trommel screens separates the crushed materials into different sizes. - Function: It classifies the aggregates into various grades according to size, ensuring uniformity and meeting specifications. 5. Conveyor Systems: - Purpose: Conveyor belts transport materials between different stages of crushing and screening. - Function: They ensure efficient material handling and continuous operation within the plant. 6. Washing Equipment (Optional): - Purpose: Washing equipment, such as sand washers or scrubbers, may be used to remove impurities from sand and aggregate products. - Function: It improves the quality of the final products by cleaning them and removing fines or contaminants. ### Processes Involved - Primary Crushing: Large rocks are fed into the primary crusher and reduced to a manageable size. - Secondary Crushing: The crushed materials from the primary crusher are further processed by secondary crushers to achieve the desired aggregate sizes. - Screening: The crushed and sized materials are screened to separate them into different sizes and grades. - Material Handling: Conveyor systems transport materials between different stages of the crushing and screening process. Final Product Handling:Finished products, such as sand and various sizes of aggregates, are stored or loaded for transport to customers or construction sites. Applications - Construction: Used in the production of concrete, asphalt, and road base materials. - Landscaping: Provides decorative and functional aggregates for gardens, pathways, and driveways. infrastructure: Essential for building foundations, drainage systems, and structural fill. As for the capacity we have 30 t/h, 30-50 t/h, 50-100 t/h, 100-150 t/h, 150-200 t/h, 200-300 t/h, 300-500 t/h, and both stationary crushing plant and mobile crushing plant are available for option.

Condition: new, functionality: fully functional, Year of construction: 2026, Dry and Wet Ball Mill: Structure, Operation, and Technical Details A ball mill is a fundamental grinding device used in mineral processing, cement manufacturing, chemical production, and other industrial applications. It works by rotating a cylindrical shell filled with grinding media—usually steel balls—causing impact and friction that reduce materials to fine powder. Based on the grinding environment, ball mills are classified into dry and wet types, each suited for specific materials and process requirements. Working Principle Both dry and wet ball mills operate on the same mechanical principle. The rotating cylinder, driven by a motor through a gear system, lifts the grinding media and material along the inner wall. As the rotation continues, the balls fall under gravity, striking and grinding the material. The difference lies in the presence or absence of a liquid medium during grinding. Dry Ball Mill A dry ball mill is used when the material must remain moisture-free or when water could affect product quality. It is commonly applied in cement clinker, limestone, quartz, and refractory material grinding. The discharge can be either grate type or overflow type, depending on the desired fineness. Technical Features: Feeding size: ≤25 mm Discharge size: 0.075–0.4 mm Capacity: 0.65–90 t/h Liner material: High manganese steel or wear-resistant alloy Lajdpfoq Nx Alsx Ackob Drive system: Gear-driven or direct-coupled motor Dust control: Equipped with air exhaust and dust collector Advantages: Suitable for materials sensitive to moisture No drying process required after grinding Lower corrosion risk and simpler maintenance Easier material classification and separation Limitations: Dry grinding produces more dust and heat, requiring efficient ventilation and dust collection systems. Wet Ball Mill A wet ball mill operates with water or another liquid medium added to the material. The slurry formed during grinding improves efficiency by reducing friction and preventing excessive heat buildup. It is widely used in ore beneficiation, ceramics, and chemical industries. Technical Features: Feeding size: ≤25 mm Discharge size: 0.074–0.2 mm Capacity: 0.65–615 t/h Liner material: Rubber or high-chromium steel Discharge method: Overflow or grate type Auxiliary equipment: Classifier, pump, and thickener for slurry circulation Advantages: Higher grinding efficiency and finer particle size Reduced dust and noise levels Continuous operation suitable for beneficiation circuits Better control of particle uniformity Limitations: Requires drying if the final product must be in powder form and involves more complex slurry handling. The selection between dry and wet grinding depends on the material characteristics, downstream process, and environmental conditions. Dry mills are preferred for materials that must stay moisture-free, while wet mills are ideal for fine grinding and slurry-based processes. Conclusion Dry and wet ball mills share the same mechanical structure but differ in their grinding environment and application scope. The dry type offers simplicity and low maintenance for moisture-sensitive materials, while the wet type provides higher efficiency and finer output for mineral and chemical processing. Understanding their technical parameters and operational differences ensures optimal equipment selection, improved productivity, and reliable performance in industrial grinding operations.

Year of construction: 2026, condition: new, ceramic ball mill ,Batch ball mill ,also called ceramic ball mill ,it is used for fine grinding of feldspar,quartz,clay,ore and so on.The ceramic ball mill is mainly used for material mixing, grinding,uniform product fineness,and saving power.It can be dry or wet.The machine can use different liner types according to production needs to meet different needs.The fineness of the grinding operation is controlled by the grinding time ceramic ball mill Working principle when ball mill working,steel balls inside drum will rotate with the drum to some height,and then steel balls fall down with materials to reach the point of grinding. Working Principle of Ceramic ball mill ceramic ball mill ,Intermittent ball mill grinding operation is finished in the cylinder body. When the cylinder rotates, materials ascend to a certain height and then fall along a certain path due to the balls' gravity. Two forces are generated on the balls inside. One is the force on balls through tangent direction; the other is a opposite force in the contrast to the diameter of balls, as a result of the force generated when the balls slide down. These two forces will constitute a couple for the steel balls. The balls are squeezed between the cylinder and the adjacent steel balls, so the couple can make unequal-sized friction force. The balls will orbit along with the cylinder axis and then fall down, which can produce a strong impact force on the ores in the cylinder body and, as a result, the ores will be crushed. In conclusion, the ores in the cylinder body are mainly crushed by composite effect of peeling force, impact force and extrusion force. Ljdpfx Acsvzx Auokoab Ceramic ball mill also named Intermittent ball mill which adopts the wet intermittent operation, is used for fine grinding and mixing the material such as feldspar, quartz, clay ceramic raw materials. The discharging and the mud size can through through 1000 sieve pore. This machine is high milling machinery, materials should be Broken in the fineness of the state into the grinding mill to get the highest efficiency and economic benefits. The cement mill is key equipment for the grinding process of the cement clinker after the crushing process of it. It is mainly used in the cement silicate product industry. After long term design and manufacture of the cement mill, our company now has series of cement mill with various specifications to meet with different requirement from our customers. Features of Cement Mill Our company adopts suitable transmission methods according to different specifications. We have brim drive and center drive as transmission form. The cylinder adopts new type step lining to increase the grinding area. And it is easily repairable and changeable. The new designed separate-chambered structure adopts flexible lifting blade and fixed lifting blade and it is easily fixed and repaired. Technical Details We have different models and options for different requirements, please contact us for more info.

Condition: new, functionality: fully functional, power: 75 kW (101.97 HP), Year of construction: 2025, Impact Crusher: Structure, Operation, and Technical Specifications An impact crusher is a high-efficiency crushing machine widely used in mining, cement, construction, and recycling industries. It is designed to crush materials by utilizing the energy of impact rather than pressure, making it ideal for medium-hard and soft materials such as limestone, gypsum, coal, and concrete aggregates. Its ability to produce uniform, cubic-shaped particles makes it a preferred choice for aggregate production and fine crushing applications. Working Principle The impact crusher operates on a simple yet powerful principle: material is fed into the crushing chamber and struck by high-speed rotating blow bars mounted on a rotor. The kinetic energy from the rotor transfers to the material, causing it to break upon collision with the impact plates (also known as breaker plates). The crushed material rebounds within the chamber for secondary impacts until it reaches the desired size and exits through the discharge opening. The process involves: Primary Impact: Material is hit by blow bars and thrown against the impact plates. Secondary Impact: Rebounded fragments collide again with the rotor or other particles, achieving finer crushing and better shape. Structural Composition An impact crusher consists of several key components that ensure efficient operation and durability: Rotor Assembly: The core component, equipped with blow bars that deliver high-speed impact energy. Impact Plates (Aprons): Adjustable plates that control the crushing gap and final product size. Feed Inlet and Discharge Outlet: Designed for smooth material flow and uniform discharge. Ledpfx Aev E Ddlsckeab Frame and Housing: Heavy-duty welded structure providing stability and vibration resistance. Adjusting Device: Hydraulic or mechanical system for controlling the gap between rotor and impact plates. Safety Mechanism: Hydraulic opening system for easy maintenance and overload protection. Technical Highlights Feed size: ≤500 mm Discharge size: 0–60 mm (adjustable) Capacity: 30–800 t/h Motor power: 45–560 kW Rotor speed: 500–1500 rpm Performance Features: High Crushing Efficiency: The high-speed rotor and optimized chamber design ensure strong impact force and high reduction ratio. Excellent Particle Shape: Produces cubic, uniform aggregates suitable for concrete and asphalt production. Adjustable Output Size: Hydraulic or mechanical adjustment allows precise control of product size. Easy Maintenance: Replaceable blow bars and liners with quick access doors simplify servicing. Versatile Applications: Suitable for primary, secondary, and tertiary crushing in various industries. Types of Impact Crushers Horizontal Shaft Impact (HSI) Crusher: Uses a horizontal rotor to deliver impact energy. Ideal for soft to medium-hard materials and widely used in aggregate and recycling applications. Conclusion The impact crusher combines high-speed impact energy with a robust structural design to deliver efficient, reliable, and versatile crushing performance. Its ability to produce well-shaped aggregates, adjustable output sizes, and low maintenance requirements make it indispensable in modern crushing systems. Whether in mining, construction, or recycling, the impact crusher remains a key machine for achieving high productivity and superior material quality.

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,200 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and stamping, powered through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety thanks to their rigid frame structure. CRONOSSTECH CEHP-TB-250 – H-Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its mono-block frame, 8-guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance under continuous production conditions. Key Advantages: - Stable operation with large dies enabled by the 1200×1000 mm table size - Die/equipment protection via hydraulic overload protection - Controlled and user-friendly operation with PLC + touch screen - High operator safety with light curtain (photoelectric guard) - Low maintenance requirement thanks to automatic lubrication system Lsdpfx Acsx N Sc Aoksab Application Areas: - Punching / cutting / stamping operations - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Welded steel construction frame • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balanced piston in ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric guard) • Enclosed gear group in lubricating oil bath • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety door in front of the bed • Custom die specifications available ✅ TECHNICAL SPECIFICATIONS (CEHP-TB-250) Capacity: 250 Ton Table–ram distance: 500 mm Clearance between columns: 1230 mm Ram adjustment: 120 mm Press width: 2900 mm Press depth: 2550 mm Press height: 4600 mm Table dimensions: 1200×1000 mm Ram face size: 1200×1000 mm Stroke (fixed): 200 mm Motor power: 37 kW Weight: 31,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are handled directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 250 t, stroke length: 200 mm, table width: 1,100 mm, table length: 2,000 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability in large table and heavy die applications thanks to their rigid body structures. The CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its monoblock body, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages: - Stable operation with large dies thanks to a 2000×1100 mm table size - Die/equipment protection with hydraulic overload protection - Precise guidance with 8-point guided ram + counterbalance piston - Controlled and user-friendly operation via PLC + touchscreen interface - High operator safety with photoelectric safety curtain Applications: - Punching/cutting/forming operations requiring a large table - Series production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Counterbalance piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touch LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Photoelectric safety curtain • Sealed oil tank with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover in front of the table • Custom-designed dies as requested ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Table Dimension: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg Laodpsx N Rwrofx Ackjb ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 200 mm, table width: 1,200 mm, table length: 2,000 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process security in large bolster and heavy die applications thanks to their rigid frame structure. The CRONOSSTECH CEHP 300 – H-Type Eccentric Press (300 Ton) is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it offers reliable performance for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2000×1200 mm table size - Die/equipment protection with hydraulic overload safety device - Precision guidance with 8-point slide and balancer piston - Controlled and user-friendly operation with PLC + touchscreen interface - High operator safety with light curtain (photoelectric safety guard) Applications - Punching/cutting/forming operations requiring a large table - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted additional bolster plate • 8-point guided slide • Adjustable stroke on single connecting rod • Balancer piston on slide • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor rotation • Hydraulic overload safety • Motorized slide adjustment • Light curtain safety guard • Enclosed oil tank with gear set • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap handling/disposal systems • Sliding safety door at the table front • Custom die manufacturing as required ✅ TECHNICAL SPECIFICATIONS (CEHP 300) Capacity: 300 Ton Table-Ram Distance: 500 mm Housing Width: 2,130 mm Ram Adjustment: 120 mm Press Width: 2,900 mm Press Depth: 2,750 mm Press Height: 4,700 mm Table Size: 2,000×1,200 mm Lsdex N Rxvjpfx Ackoab Ram Face Size: 2,000×1,200 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 41,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, pressing force: 300 t, stroke length: 200 mm, table width: 1,000 mm, table length: 1,400 mm, warranty duration: 24 months, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, driven by force produced through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process safety due to their rigid frame structures. The CRONOSSTECH CEHP-TB-300 – H Type Eccentric Press 300 Ton, is designed for high-volume production with a focus on stable operation, die protection, and operator safety. Featuring a monoblock frame, 8-point guided ram system, hydraulic overload protection, and an automatic lubrication infrastructure, it delivers reliable performance suited to continuous production environments. Key Advantages • Stable operation for large dies with 1400×1000 mm table size • Die/equipment protection with hydraulic overload safety • Controlled and user-friendly operation via PLC with touch screen • High operator safety with light curtain protection • Low maintenance needs thanks to automatic lubrication infrastructure Applications • Punching / cutting / die forming operations • Mass production with automatic feeding lines • Heavy-duty die and high-tonnage production processes Standard Features • Steel construction frame • Pneumatic clutch & brake • T-slotted supplementary plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motor reverse operation • Hydraulic overload safety • Motorized ram adjustment mechanism • Light curtain protection • Gear group in closed oil reservoir • Double solenoid safety valve • CE compliance Optional Features • Press feeding systems Lasdpfx Aox N Sdmeckjb • Scrap discharge systems • Sliding safety cover at table front • Dies as per custom specifications Technical Specifications (CEHP-TB-300) • Capacity: 300 Ton • Table-to-ram distance: 500 mm • Housing width: 1430 mm • Ram adjustment: 120 mm • Press width: 3100 mm • Press depth: 2550 mm • Press height: 4700 mm • Table size: 1400×1000 mm • Ram face size: 1400×1000 mm • Stroke (fixed): 200 mm • Motor power: 45 kW • Weight: 35,000 kg Production / Supply Note This machine is manufactured by CRONOSSTECH in Turkey. All sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: used, Year of construction: 2010, Powder coating line from 2010, in excellent condition. Currently in use, available for inspection and testing. Maximum part size: L x W x H = 2600 x 400 x 1850 mm Equipment Technological conveyor Automatic speed V = 1.2 m/min Speed regulation from 0.5 to 2.5 m/min Preparation station MNA-3-LPG, total length 16.7 m Entry area: L = 2.5 m a. Washing, degreasing and phosphating: L = 3.6 m Number of spray frames – 10 Number of nozzles in the frame – 18 Total number of nozzles – 180 Pump capacity – 162 m³/h Pump power – 15 kW 4 m³ capacity for active liquid Internal heat exchanger with LPG burner – 160 kW Temperature – 50°C Mechanical oil separator Filtration system Dosing system with diaphragm pump and regulator Washing time – 3 min b. Drip zone L = 3.1 m Drip time – 2 min 30 sec c. First rinse L = 1.2 m Number of spray frames – 4 Number of nozzles in the frame – 18 Total number of nozzles – 64 Pump capacity – 38 m³/h Pump power – 3 kW 1.5 m³ water capacity Rinse time – 1 min d. Drip zone L = 3.1 m Drip time – 2 min 30 sec e. Fine rinse L = 1.28 m Number of spray frames – 3 Number of nozzles in the frame – 18 Lodpfxev Ed Uke Ackjab Total number of nozzles – 54 Pump capacity – 33 m³/h 1.5 m³ water capacity Pump power – 3 kW Additional spray frame Rinse time – 1 min f. Drip zone L = 2 m Drip duration – 1 min 40 sec Three connections for the extraction system with three fans Working zone made of stainless steel Pipes made of PVC or stainless steel 1 pc. Automatic dryer after washing AST-1-KLPG: Dimensions of the working zone L x W x H = 7000 x 3000 x 2800 mm Air curtains on each side to reduce heat loss Indirect heat exchanger, heated by LPG, 200 kW Three fans, air supply 6000 m³/h Two connections for the extraction system Temperature sensor and regulator Overheating sensor Circulation sensor Working zone made of galvanized steel Thermal insulation 200 mm thick Drying time – 10 min 1 pc. Automatic polymerization oven APT-2-KLPG Working area dimensions L x W x H = 10200 x 3600 x 2800 mm Air curtains on one side to reduce heat loss Two indirect heat exchangers heated by LPG, each 300 kW Eight circulation fans, each with a capacity of 6000 m³/h Two connections for the exhaust system Temperature sensor and regulator Overheating sensor Circulation sensor Working area made of galvanized steel Thermal insulation 200 mm thick Polymerization time – 25 min 1 pc. Overhead rail transportation system for ATR paint shop: Straight rail with hangers L = 400 mm – 146 m Drive station – 2 pcs. Tension station – 1 pc. Chain lubrication station – 1 pc. Rail support structure drawings – 1 set.

Condition: new, Year of construction: 2026, functionality: fully functional, /// Overview Lajdpfxsy Sk T Ee Acksb The NB7X is a high-performance automatic edge banding machine designed for handle-free cabinet door production. It switches easily between half bevel (45°) and full straight edge modes, and features twin diamond cutters, a twin glue station, and a twin tape coil magazine. Suitable for panels from 9 to 50 mm thick (straight) and 15–25 mm (half bevel), it is an excellent solution for modern, handleless furniture manufacturing. /// Key Features Bevel edge milling — Two 4 kW high-power motors at 2,800 rpm with 45° diamond forming bevel cutters for precise, crack-free milling. Pre-milling — Dual Leitz diamond cutters (2× 3.7 kW, 9,000 rpm) rework imperfections from panel saw cutting for superior edge adhesion. Twin glue system — Separate gluing units for straight and 45° bevel edges; Teflon-coated EVA glue pot (~5 L) plus optional auto glue pumping with a 25 kg basin. Pre-heating — Warms the panel edge before gluing, ideal for cold or humid environments. Tape handling — Separate tape brackets for full straight and half bevel modes, with an edge tape grooving device for cleaner folding on thicker tapes. End, rough, fine & corner trimming — Full set of trimming stations with high-speed motors and copy-tracing structures to protect hinge holes. Scraping & buffing — Flat and profile scraping removes excess glue; dual-cloth buffing delivers a polished, shiny finish. Top presser — Aluminum beam with auto height adjustment based on workpiece thickness; compact wearproof rubber rollers prevent displacement during conveying. Safety — Feeding protector, workpiece thickness detection, interval feeding detection, and emergency stop. Control — 10″ touch screen with PLC control (380V/50Hz), energy-saving standby mode, and remote switch. Available in English, Simplified Chinese, and Traditional Chinese. /// Machine Construction The heavy-duty welded steel body undergoes heat treatment, vibration aging treatment, sandblasting, and CNC finishing for long-term dimensional stability. All machines are assembled by experienced technicians following strict SOPs and delivered with a Quality Certificate signed by a QC specialist.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Ljdpsy S Axgsfx Ackoab Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: new, Year of construction: 2025, functionality: fully functional, power: 34 kW (46.23 HP), input voltage: 380 V, Equipment: documentation/manual, Upper pressure bar Aluminum pressure bar provides excellent rigidity and extended service life. The compactly arranged rubber rollers press the workpieces to ensure slip-free transport. Panel conveyor The long, heat-treated semicircular guide rail allows perfect contact with the conveyor, without play. The conveyor is fixed to the machine body for stability of wide panels, with a maximum extension width of 600mm. Package for narrow parts Feeding package for narrow parts, ensuring the minimum edge width is 40 mm. Pre-milling unit Pre-milling with 2 diamond cutters, 43mm height. Two pneumatically controlled motors (2 x 3.7kW), intermittent edge milling of the panel. Panel pre-heating unit x2 Heats the panel edge so that the adhesive melts correctly, ideal for humid or cold areas. An infrared lamp with an operating temperature of 300°C heats the panel edge for better bonding. Edge band support x2 The large support is at an appropriate height for easy feeding and long service life. Ljdpfx Aey Rlbnjckeab Edge cutting unit x2 Pneumatically operated guillotine with electric switch for accurate cutting of the edge band at the end. Premelting gluing unit x2 System includes an upper reservoir for optimal volume and a small lower pot that keeps the adhesive fresh. Automatic adhesive pumping + 25kg tank Adhesive is automatically pumped into the upper reservoir when the level drops below the sensor. Edge cutting unit Pneumatically operated guillotine with electrical switch for correct end-cutting of the edge band. 2 sets of pressure rollers A 100mm pre-pressing roller in coordination with four rear rollers ensures firm bonding. Lubrication system Lubrication pump for daily maintenance, lubricates the guide rail by simply actuating the lever. End trimming unit Structure with linear guide at 45 degrees, with 2 motors of 0.35kW, 12,000 rpm. 2 sets of fine finishing units with pneumatic retraction One set retracts pneumatically when changing band thickness; adjustment time is practically zero. Diamond knives R1.5. Corner rounding unit Designed for rounding the edge band on the ends and lengthwise, achieving a circular radius R. 2 sets of scraping units with pneumatic actuation Two sets with different circular radius knives (one set with R1.5, the other with R1). Extraction system Each unit has its own independent extraction outlet (125mm), totaling 6 outlets. Straight glue cleaning scraping group Removes edge band residues, followed by straight scraping to remove excess adhesive from the top and bottom surfaces. Spraying unit - cleaning agent Separation agent before pre-milling, preventing adhesive from sticking to the panel surface. 2 sets of polishing units Intended for 2 adhesive colors (dark and light) to avoid contamination. Solution for narrow pieces Allows processing of parts with the following sizes: 120x120mm (4 sides), 200x40mm (long side), 40x200mm (short side). Additional conveyor roller Solid support for large or in-line panels. PUR Device 2KG/20KG – 6500 EUR + VAT Temperature control system via touch screen and uniform heating. Polyurethane-based (PUR) adhesive technology ensures superior bonding performance.

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Kilia 65 l | Meat/Bowl Cutter Manufacturer: KILIA Fleischereimaschinenfabrik Fritz Reimers GmbH u. Co. KG Type: 65 Machine Number: 89413239 Year of Manufacture: 1994 Bowl Capacity: 65 liters Rated Power: 22 kW Rated Current: 51 A Supply Voltage: 400 V Frequency: 50 Hz Current Protection: 63 Amp. slow-blow The Kilia 65 is a professional, compact bowl cutter of German manufacture, designed for use in meat processing plants, artisan butcheries, and industrial kitchens. The device is used for chopping, mixing, and emulsifying meat and vegetable ingredients, making it a key component in the production of fillings for sausages, pâtés, finely ground processed meats, and all types of culinary preparations. Thanks to its powerful 22 kW motor, the cutter easily handles the intensive chopping of even well-chilled or sinewy raw materials. - Advanced bowl drive: The device is equipped with two bowl speed settings and a function to change the direction of rotation (forward and reverse operation), allowing for optimal adjustment of process parameters to the type and structure of the filling being prepared. - Robust construction: The housing and body are made of high-quality materials that are resistant to corrosion and meet the strict sanitary and hygienic standards of the food industry. - High efficiency: The optimal ratio of bowl capacity (65 liters) to engine power (22 kW) ensures rapid and precise cutting without overheating the filling. - Durability: Kilia machines from the 1990s are known for their extremely durable mechanics and simple, reliable electrical systems, which facilitate day-to-day operation and maintenance. Lsdpfx Acoy Tza Eskeab

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 111220 € 2102.06 € 400 mm 500 mm 400 mm 225 mm 400 mm 50 kg 450 mm 500 - 2200 1/min 5,5 kW 19 kW 2800 mm 2800 mm 2610 mm 2850 x 2000 x 2470 mm 3450 kg Dm. 355 x 38 x Dm. 127 mm 0,001 mm 1.7 kW 2.4 kW 10 - 150 1/min 0.005 mm 0.003 mm iSurface control with 10,4" touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English Lasdpfowiq U Rex Ackob ALTERNATIVE: model version FRG-400S with Smart iControl for profile grinding price on request (symbol photos - showing model FRG-600)

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan Ledpfewiq Nnox Ackoab 122120 € 2308.07 € 600 mm 500 mm 600 mm 325 mm 600 mm 205 kg 450 mm 500 - 2200 1/min 5,5 kW 19 kW 2800 mm 2800 mm 2610 mm 2850 x 2000 x 2470 mm 3500 kg 820 mm Dm. 355 x 38 x Dm. 127 mm 0,001 mm 1.7 kW 2.4 kW 10 - 150 1/min 0.005 mm 0.003 mm iSurface control with 10,4" touchscreen for fully automatic grinding in machine manual wheel balancing traveling column rib structure AC servo motors für Y/Z axes and rotary table 1 pc. wheel flange 1 pc. grinding wheel Dm. 355 x 38 x Dm. 127 mm Coolant equipment with automatic paper filter and magnetic separator automatic dresser on the table, with compensation fully enclosed splash guard electromagnetic round chuck, fine pole pitch (1+3 mm) working lamp warning lamp operating manual in German and English ALTERNATIVE: model version FRG-600S with Smart iControl for profile grinding moreprice € 3.600,00

Year of construction: 2025, condition: new, functionality: fully functional, The DANIBRUM SIP series of brush sanders is a complete solution for the professional finishing of wood, MDF, milled or composite panels. Comprising the SIP610, SIP810, SIP813 and SIP1013 models, the range covers the varied requirements of processing workshops and medium and large industrial units SIP610 is an automatic brush sander, designed with state-of-the-art technology to perform finishing processes on flat and profiled surfaces with maximum precision. The equipment is ideal for rounding off sharp edges, cleaning the surface of fine dust, as well as preparing for painting or varnishing Whether used in a medium-sized workshop or in an industrial line, the SIP610 offers a constant output and a uniform quality of finish, with a minimum of manual interventions Ljdpfx Acewgw Tzekoab The high-quality brushes apply a controlled and adaptable pressure, which allows for the effective removal of imperfections without damaging the material Equipped with a PLC control system and a touch screen interface in Romanian, the SIP610 is easy to use, even for less experienced operators. Predefined programs allow rapid adaptation to different types of materials Thanks to SICK brand encoders and the electrical adjustment system of the working groups, extremely precise positioning can be achieved, with deviations of only 0.1 mm From solid wood to MDF or composite panels, the SIP610 can be successfully used for a variety of applications, offering consistent and superior results Individual electrical adjustment for each sanding group, which allows fine setting depending on the material Rotating discs with double direction of rotation and oscillation, for complete coverage of the workpiece Synchronized oscillation drums, which contribute to uniform contact with the workpiece surface Fast Release system for sanding discs The groups can be extracted laterally, making maintenance and brush changes easier Rubberized feed belt with increased grip, with milled profile for optimal traction Toothed belt transmission and oscillation reducer, which reduces vibrations and noise Linear guides with recirculating balls for smooth and precise movements Schneider electrical components and XINJE frequency converters, guaranteeing reliability and constant control Ergonomic swivel control panel, allowing intuitive operation from multiple positions LED light for increased visibility in the work area Built on a solid metal structure, the SIP610 is designed to withstand demanding industrial environments. The 4 vertical cylinders supporting each sanding group ensure evenly distributed pressure, which helps reduce wear While the SIP610 is recommended for medium-sized workshops or industrial spaces with constant production flow, the SIP810, 813 and 1013 are designed for complex requirements or large work volumes The models in the SIP range are equipped with similar digital control technologies, efficient exhaust systems and industrial-quality components The SIP610 model, with automated functions, precision control and adaptability to various types of panels, is a reliable partner in any production environment. By expanding the range with the SIP810, SIP813 and SIP1013 models, the SIP series completely covers the needs of a modern wood industry Technical support in Romanian - English - German

Condition: used, Year of construction: 2016, // Equipment dismantled and stored in our warehouse // Manufacturer: Italvacuum Model: Cosmodry System IHD 3200 Year: 2016 Type: horizontal vacuum paddle dryer Application: drying wet powders ATEX (Eex) unit: yes Industries: Fine chemicals, pharmaceuticals (API), intermediates A) Agitation: Concentric agitator with heated shaft, removable in several segments (double mechanical seal) Transmission: (CEMP) - Power 30 kW + Gearbox + Chain Agitation speed: 1.6 ÷ 8.1 rpm Atex: explosion-proof ATEX II 2GD Mounted with the dryer on a support structure (single SKID) B) Drying chamber with discharge valve Total volume : 3200 Liters Useful volume : 30% - 80% Internal pressure : -1 / 0,5 barg Jacket pressure : 0 / 1,7 barg Project temperature : -10 / +130°C Maximum heating fluid temperature: +100°C Best vacuum tightness: 4 mbar/h EX-I absolute pressure transmitter PT100 Ex-i product temperature sensor Nitrogen backwash system Rotary chopper speed: 300 / 1200 rpm (not installed) Ljdpox R D Efjfx Acksab Material in contact with the product: AISI 316L - EN 1.4404 Vacuum seals: PTFE and FEP Jacket material: AISI 304 - EN 1.4301 Heating fluid: Diathermic oil Mirror-polished interior finish (Ra ≤ 0.4 µm) Satin exterior finish (Ra ≤ 1.2 µm) Inspection and Shut-off Valve DN.1650 Buffer Relief Valve DN 200/300 DN 250 Butterfly Loading Valve Prepared for the installation of two choppers (lateral knives) C) Process filter D) Vacuum unit: SAURUS939 piston vacuum pump, model VVD Pump support bench ATEX: Ex-d-IIB-T4 – IP55 Power: 11 kW Atmospheric pressure surface condenser, model VD200I E) Vacuum condensing unit - AISI 316L stainless steel with double cooling jacket in AISI 304 stainless steel. Internal design pressure: -1 / 0.5 barg Jacket design pressure: 0 / 3 barg Design temperature: -10 / 40 °C Maximum cooling liquid pressure: 2.5 bar Exchange surface area: 8.5 m2 Condensate collection capacity: 900 litres Level sensor F) External safety filter G) Temperature control system: Heating/Cooling Steam liquid heater: Pressure 7 bar - Jacket temperature: 142°C - Surface area: 1.65 m2 Cooler, mounted on the heater: cold water or brine - Pipe jacket pressure: 12 barg - Jacket temperature: 142°C - Pipe temperature: -10°C /+ 99°C - Surface area: 3.42 m2 H) Command and Control System (Electrical Cabinet + HMI) Complete technical file

Condition: new, functionality: fully functional, power: 11 kW (14.96 HP), Year of construction: 2025, A spiral-type sand washer machine, also known as a spiral sand washing machine or screw sand washer, is a piece of equipment designed for washing, classifying, and dewatering sand and other granular materials. This type of sand washer typically features a spiral or screw-shaped structure for the purpose of lifting, conveying, and washing materials. Here are key features and aspects of a spiral-type sand washer machine: 1. Spiral Structure: The core component of the machine is a spiral or screw-shaped structure, often enclosed within a tub or trough. This spiral impeller is responsible for lifting, conveying, and washing the sand as it rotates. 2. Tub or Trough Design: The spiral structure is usually housed within a tub or trough that holds the water and sand mixture. This design allows for efficient washing and separation of impurities from the sand. 3. Multiple Blades: The spiral impeller typically has multiple blades or flights that provide mechanical agitation to the sand, ensuring thorough cleaning. 4. Water Injection: Water is injected into the tub or trough to aid in the washing process. The combination of water and the rotating spiral helps to remove impurities from the sand. Laedpfx Asq Nf S Rjckeb 5. Adjustable Weirs: Some spiral-type sand washers have adjustable weirs or gates that control the flow of water and the retention time of the sand in the machine, allowing for customization of the washing process. 6. Classification and Dewatering: Spiral sand washers often include features for classifying and dewatering the sand. This may involve the use of a separate compartment or mechanism for fine sand recovery and water drainage. 7. Variable Speed: The rotational speed of the spiral can often be adjusted to optimize the washing process for different types of materials and particle sizes. 8. Capacity: The capacity of a spiral-type sand washer is influenced by factors such as the size of the machine, the pitch of the spiral, and the efficiency of the washing process. Different models are available to suit various production requirements. 9. Materials Handling: Spiral sand washers are commonly used in applications such as aggregate processing, mining, concrete production, and other industries where the removal of impurities from sand is essential. 10. Ease of Maintenance: Many spiral-type sand washers are designed for easy maintenance, with accessible components and inspection points. Spiral-type sand washer machines are efficient tools for cleaning and processing sand, ensuring that the final product meets quality standards for use in construction, concrete production, and other applications. The specific features and capabilities of these machines can vary between different models and manufacturers.