Used Drag Finishing Machine for sale (65,557)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, Digicon series 2 2010 model specifications: • Web Width: 330 mm Nodpfx Akoyl Alfjfola • Flexo Varnishing Unit: 1 unit • Rotary Die-Cutting Unit: Equipped with a K&B GapMaster system • Maximum Unwind Roll Diameter: 700 mm • Running Speed: Up to 36 meters per minute at a 300 mm repeat length • Plate Cylinder Flexo Sizes: • Minimum: 10 inches (254 mm) • Maximum: 24 inches (609 mm) • Maximum Rewind Diameter (Single Spindle): 600 - Rotary and flat blade spitting

Condition: new, Year of construction: 2025, * 60 lt Capacity * 2,2 kW High performance three phase current drive motor. * Adjustable speed control up to 200 rpm. * Control panel and dosing pump included. - The dosage pump automaticly puts the chemical to the bowl * Working hours timer * PU or INOX plate * Changeable valve for the wastewater decharging. Nljdpfx Aoh Nnbcskfea * Inner bowl has canals and gaps for ensuring non stick wall.

Condition: new, Year of construction: 2025, * 250 lt Net Volume * Dosing pump included. Nodpoh I N Udefx Akfsla * Highly wear resistant P.U.Lining (90 Shore) * High performance three phase current drive motor. * Changeable valf for the wastewater decharging * Main swicth and emergency stop switch. * Timer and working hours timer * Special construction of control panel(EU Standarts) included

Condition: ready for operation (used), Profile Deburring Machine, Finishing Machine, Vibratory Bowl Finisher, Vibratory Polishing Machine, Used Machine Manufacturer: Vibrochimica Type: VBT 2E 650 Overall dimensions: 2260 x 1870 x 1450 mm Nledsyycc Ijpfx Akfea Year: 2005 Weight: 1160 kg Electrical data: 400 V; 5.5 kW d: 840 mm D: 1340 mm Torus Ø: 430 mm

Condition: used, Year of construction: 2023, controller model: , _____ Nodeyz Hr Nepfx Akfela Description: Year of manuf. : 2023 Control : Technical Data: Speed (stepless):0-3.300 U/min Cageload (max.):8 kg Equipment/Accessory: Partscleaning:Denios Washingtable Further Accessory:Misc. operating materials

Year of construction: 2011, condition: good (used), Heated surfacefinishing machine for Zink-magnesium coating Nledpfefndpnjx Akfoa Tank capacity : 150 l Heating power: 20 kW Weight: 1230 kg

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS125, total width: 870 mm, total height: 950 mm, overall weight: 185 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 150 mm, workpiece length (max.): 150 mm, ZCVS 125 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 125 liter volume * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: Nsdpfx Akeh Agr Hefela * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5011 & RAL 7036 *Epoxy paint is used to ensure long life of the paint

Condition: new, TV73 Trough Vibrator – High-Performance Vibratory Finishing Machine for Deburring, Polishing & Surface Finishing | Made in Germany Machine type: Trough Vibrator TV73 Shown: TV73 incl. sound enclosure Manufacturer: Eurotec Innovation GmbH The TV73 trough vibrator from Eurotec Innovation is a powerful all-round solution for industrial surface finishing. Thanks to its robust design, high efficiency, and versatile application options, this system is ideally suited for a wide range of applications in the metalworking and manufacturing industry. The perfect solution for companies looking to optimize processes and sustainably improve surface quality. ⚙️ Technical Data: Machine type: Trough vibrator / vibratory finishing machine Manufacturer: Eurotec Innovation GmbH Model: TV73 Nominal speed: approx. 1,500 rpm Gross volume: approx. 470 liters Container internal dimensions: Length: approx. 1,100 mm Width: approx. 680 mm Height: approx. 700 mm Power supply: 400V / 16A / 50Hz Your Benefits at a Glance: ✔ Universally applicable for a wide range of workpieces and materials ✔ High efficiency thanks to a powerful vibration motor mounted beneath the working bowl ✔ Processing of large workpieces possible due to U-shaped working container ✔ Robust, low-maintenance design for reliable continuous operation ✔ Quick media change & emptying via large drain opening ✔ Reduced part adhesion thanks to integrated separation edge ✔ Rubber-damped feet for reduced vibration transmission ✔ Optionally available with sound enclosure & additional features 🏭 Typical Applications: Deburring, smoothing, and polishing of components Descaling, derusting, and cleaning Edge rounding Surface finishing of a wide variety of materials Equipment & Options: U-shaped working container for maximum flexibility Vibration motor (mounted directly under the container) Forklift/pallet truck pockets for easy transport Quick-change drain screen (polyurethane) Optional: Sound enclosure / acoustic hood Workpiece separation systems Frequency control / PLC control Dosing systems & automation The TV series stands for excellent value for money and premium quality. All systems are developed and manufactured according to the highest standards – 100% Made in Germany. The images show the system including optional accessories, which are available separately. ----- We are happy to provide individual consultation and prepare a suitable offer – feel free to contact us! ----- The European Commission provides a platform for out-of-court online dispute resolution (ODR platform). Nlodpsh Ukxlofx Akfea This offer is intended solely as an online presentation of our products. Contract negotiations are conducted via telecommunications (email, fax, telephone, messaging portal). We will first provide you with a non-binding offer, including our general terms and conditions and information on the right of withdrawal along with legal notice details, before any purchase/contract conclusion is made.

Condition: excellent (used), Wide Belt Sander FORMAT 4 Finish 1302 -used- Constant working height due to upper part adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Automatic belt centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Data ----- Working width: 1,300 mm Number of belts: 2 units Sanding belt dimensions: 1,310 x 2,200 mm Feed speed: 3.7–16 m/min Segment width sanding pad: 55 mm Max. workpiece thickness: 170 mm Nedpsxnm Rcjfx Akfela Min. workpiece thickness: 5 mm Extraction port Ø: 2x200 mm Motor power: 18.5 kW Second motor power: 15 kW Dimensions (LxWxH): 1,950 x 2,250 x 2,600 mm Weight: 2,400 kg Quality Information: - Belt tracking / balance checked - Sanding pad checked / refurbished - Height adjustment checked - Thorough basic cleaning - Electrical system checked - Immediately ready for use

Condition: refurbished (used), Year of construction: 2021, operating hours: 850 h, functionality: fully functional, In addition to the machines mentioned and shown, we have many other machines and accessories (blasting systems, conveyors, and small machines) available from stock. The machines can be purchased or rented. Contact us for (free) advice on vibratory finishing, drum & blasting technology. Nodpfx Ajwfdbcskfola

Condition: used, functionality: fully functional, rotational speed (max.): 800 rpm, inner dimension width: 400 mm, Rösler HTZ 400 drying centrifuge incl. heating fan, stepless speed control Nedoy Ap E Uspfx Akfola 2 units for sale No. 1 - Year 2016 No. 2 - Year 2011 - 7552 hours The Rösler centrifuges of the HTZ series are ideally suited for spotless drying of small parts, while preventing any mixing of workpieces.

Condition: used, functionality: fully functional, Thanks to its powerful motor, the machine consistently delivers precise, clean, and reproducible results even under heavy load. The stepless speed control enables optimal adjustment to the material and application, ensuring even sensitive surfaces can be processed smoothly and with control. Another key feature is the modular POLY-PTX system: With a wide range of interchangeable tools, the machine can be flexibly used for various tasks—from decorative grinding patterns to intensive pre- and post-processing. Its ergonomic design, balanced weight distribution, and low-vibration operation provide high operator comfort—even during extended use. Durability and robustness make this satin finishing machine a cost-effective investment for workshops, metal fabrication, and industrial applications. Power supply: Corded Suitable tools: Brushes, sleeves, polishing rings, wheels Plug type / power supply: EU (C+F) 220 - 240 Volt ~ 50 - 60 Hz Power input: 1750 watts Max. tool dimensions: Diameter 115 x width 100 mm Njdpfx Asy Attiokfela Tool holder: 19 mm keyed shaft Speed (min-1): 1,000 - 3,800 Dimensions: 425 x 195 x 180 mm

Condition: used, Year of construction: 2021, operating hours: 2,725 h, 2021 Rösler Model RHBD 13/18T Overhead Conveyor Shot Blasting System (only 2725 hours) 3 Part System. Modern, High-Performance Overhead Conveyor Shot Blasting System Designed For Continuous Surface Treatment Of Medium To Heavy Components. Suitable For Cleaning, Descaling And Surface Preparation Prior To Coating. The System Was Used For Blasting Magnesium Die-Cast Components. With The Same Blasting Media, The System Can Also Be Used For Aluminium Die-Casting Or Aluminium Casting, Brass Casting, E.G, Fittings. The Blast Cabinet Has Four Blast Turbines With Automatic Abrasive Recirculation For Continuous Use Of The Blasting Media. The System Has A Wet Separator. The Overhead Conveyor System Has 18 Rotating Stations To Which 18 Workpiece Carriers Can Be Attached. There Are 14 Stainless Steel Workpiece Carriers On Which Components Can Be Hung. Operating Hours: 2,725. Rated Power: 135 Kw/400v. 6 Blast Wheel Turbine. Rated Speed Per Turbine: 2,500 Rpm. Rated Blast Media Quantity Per Turbine 45Kg. With Circulating Overhead Conveyor, Including Workpiece Carrier, With Wet Filter System. Control System Siemens Simatic HMI. S/No.96410 (2021) Nedpfx Ajy Am Duekfjla Overhead Conveyor Steel System Model RHBD. Shot Turbines Gamma. Gate Width 1,300mm, Gate Height 1,800mm. Pneumatic Gate Operation, 4 Gate Leaves. Safety Monitoring, Swivel Field Gate. Lifting/Lowering Device For Hooks. Wear Protection Plates 10mm Against Turbines And Ceiling. Wall Thickness Of Blasting Chamber 8mm. Filter System 4,000 M³/H. Wet Separator Type RF 800 NS, No. 96411. Conveyor System Freely Configurable. Maximum Hook Load Per Suspension 1,000kg. Workpiece Carriers In The Blasting Cabin Automatically Rotating, Freely Configurable. Recommended Diameter Of Hanging Workpiece Carriers 1,100mm. Recommended Height Of Hanging Workpiece Carriers 1,600mm. 14 Goods Carriers With A Diameter Of 1,000mm And A Height Of 1,450mm Available. Abrasive Return Via Linear Conveyor System And Elevator Conveyor Into The Feed Hopper. Abrasive Supply To The Blast Turbines Through Screw Distributors With Adjustable Abrasive Quantity. Occupational Safety And Explosion Protection Report For Magnesium Processing Available. Dimensions Of The Blast Cabinet Approximately: Width 2,800mm, Length Approximately 10,500mm, Height Approximately 3,500mm. Please Note The Machine Was Dismantled In August 2025.

Year of construction: 2012, condition: used, Control Siemens In our opinion, the machine is in good used condition and can be inspected Nsdpfexqrg Isx Akfjla under power by appointment. There are 2 identical machines available. Technical features: - PLC controlled, Siemens Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2015, condition: used, control Siemens number of workstations 4 Stück CAB unit 2 Stück Workpiece spindle: 4 Stück Height in the middle of the circular indexing tabl 1396 mm tail stock 4 Stück Workpiece spindle speed (3x) 3000 1/min Speed ??CAB unit (2x) 6000 1/min Rotary table speed (1x) 1435 1/min Workpiece spindle drive 9 Nm CAB unit 6 Nm round table 0,75 kW In our assessment, the machine is in good condition and can be inspected under power by appointment. The machine was used for cam machining. Comprehensive operating instructions are available. See the installation plan in the PDF document. Nodpjxq Hknefx Akfela Accessories, tools, and clamping devices shown are only included in the scope of delivery if explicitly stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Year of construction: 2018, condition: used, workpiece length 600 mm Total weight approx. 4985 kg In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Engineering year: 1994 Nlsdpfoxfwfljx Akfea complete retrofit: 2018 Accessories and technical characteristics: - 160 mm jaw chuck Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Year of construction: 2004, condition: used, Control Siemens Sinumerik connected load 12 kVA In our opinion, the machine is in good used condition and can be viewed under power by appointment. Including Felsomat FZ250 Loading system Nljdpfx Akjxwdwljfea Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well Subject to prior sale!

Condition: excellent (used), Year of construction: 2008, Top finish brushing machine Italmeccanica TOP FINISH Njdpfxsk Iu Hvo Akfsla 6T -2M brushing machine one horizontal shaft two edge pin two rotary

Condition: ready for operation (used), WALTHER TROWAL Type CA 650 incl. centrifuge -Drum diameter: 1600 mm -Coating in good condition -Speed: 1450 rpm -Timer -Centrifuge -Soundproof cover -Working platform -Power: 11 kW Nlodpfxsyz Sits Akfea Subject to errors and omissions.

Condition: excellent (used), Robust industrial machine made in Germany: Walther Trowal, model DLT 4, year 1980. The device is intended for surface finishing of metal, aluminum, or plastic parts – trowalizing process (deburring, edge rounding, polishing, cleaning). Classic drum-type construction – reliable, heavy-duty, and durable, typical for “West Germany” manufacture. Technical data: • Model: DLT 4 • Manufacturer: Carl Kurt Walther GmbH & Co. KG, Wuppertal-Vohwinkel (West Germany) • Year of manufacture: 1980 • Drive type: ZOD71N 10 • Motor power: 0.38 kW • Power supply: 380 V / 50 Hz • Drum speed: 31 / 61 rpm • Range: 3.5 – 7 rpm • Drum diameter: Ø 70 cm • Working length: approx. 80 cm • Net weight: 825 kg Condition description: • Complete machine, drum rotates smoothly and evenly. • Perforation and internal lining in good condition. • No visible cracks or structural damage. • Requires electrical connection and possibly a basic inspection. • Ideal for tool shops, machining plants, or production lines. Application: • Deburring and cleaning parts after machining. • Polishing metal or aluminum components. • Finishing screws, bushings, stamped parts, castings, and precision components. Condition: used, robust, classic Walther Trowal construction – ready for light refurbishment or immediate operation. Nedpfx Aexmlinskfjla

Condition: excellent (used), Year of construction: 1988, For sale: Industrial vibratory finishing machine from the renowned brand SPALECK (Max Spaleck GmbH & Co. KG, Bocholt, West Germany) – model VAT-240. Robust unit manufactured in 1988, designed for professional finishing of components. Ideal applications include: • Surface polishing • Deburring after machining • Edge rounding • Cleaning and surface preparation prior to painting or electroplating Works with different types of media – ceramic, plastic, or steel – depending on the workpieces to be processed. Technical data: • Model: VAT-240 • Year of manufacture: 1988 • Maximum batch load: 500 kg • Power supply: 3-phase, 380 V, 50 Hz • Control voltage: 220 V • Rated current: 20 A • Protection: 25 A • Total power: 18.1 kW Nledpfx Aew Ixw Aokfsa • Serial number: 63712 • Included: control cabinet with START/STOP buttons, emergency stop switch, and ammeter The machine is complete, in good technical condition, and ready for operation upon connection. Heavy-duty construction, discharge chute with rubber cover, and convenient media change system. SPALECK is a German brand known for manufacturing reliable vibratory finishing machines, highly regarded by industrial plants worldwide.

Year of construction: 2013, condition: used, Technical details: swing diameter: 80 mm Nsdpfx Aksixl Ahjfela workpiece length: 450 mm weight of the machine ca.: 3500 kg

Condition: used, Vibratory parts feeder, vibratory finishing machine, circular vibratory bowl, tumbling drum, used machine Manufacturer: Rösler Oberflächentechnik Overall dimensions: Width: 1310 mm Depth: 1185 mm Nlodpfx Akeyh En Eofja Height: 1440 mm Weight: 690 kg Trough size : Ø 1090, depth to discharge height : 240 mm Electrical data: 400 V Applications: deburring, grinding, polishing, cleaning The Rösler R185 vibratory finishing machine is ideally suited for deburring, edge rounding, cleaning, and surface finishing of metal and other components. Reliable, industrial-grade German machine designed for continuous operation.

Condition: reconditioned (used), functionality: fully functional, Löser RP+S374-1, centerless tube grinding machine, cylindrical grinding machine, wet grinding, wet machining Belt grinding station: one Grinding belt: 150 x 2500 mm Contact wheel: 150 x 400 mm Belt tension: pneumatic Wheel drive: 5.5 kW Part feed: 0 - 8 m/min Part diameter: 10 - 100 mm Part length: 60 - .....mm Nodpfeyxdgljx Akfola Working direction: from right to left

Condition: used, Year of construction: 2000, Technical details: workpiece diameter: 26 mm swing diameter: - mm workpiece length: 66 mm total power requirement: 12 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 3,14 x 1,69 x 2,2 m The machine has so far processed the parts in a stream, i.e. without interruption. Piston rods are usually machined with a clearance, requiring the finishing stone to be placed only when the part passes under the stone. 1. Feed Roller 2. Stone holder, 10 pieces, 50 mm new guides can be made between approx. 15 to 40 mm The Roller of Nagel: Dia: approximately 120 mm L: app. 880 mm Njdpfjw Nxkfox Akfjla *