Used Flame Lamination Machine for sale (66,238)

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, STC-Ref: G-791-0215 D&K Europa System, Year: 2012 format: 540x740 mm equipped: - measurement 2880L x 1250W x 1440H mm - foil thickness 25 - 42 microns - temperature control: 80 - 140°C - reel lifter Knsdjz A Abdjpfx Afdob - final format max: 520 x 750 mm mm - final format min: 205 x 220 mm - weight 780 kg - max. speed (single-sided lamination): 25 m/min - flat pile feeder - Sleeking option - compressor - sheet decurler --> available: 12/2026

Condition: good (used), Year of construction: 1998, functionality: fully functional, Automatic Stream Feeder A-10-P: Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Knjdpfxezv S N Ts Afdjb Automatic Laminating Unit EK 78 (Waterbased & Thermal) Automatic BAT Sheet Seperator Max. Sheet Size X : 760 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min

Condition: good (used), Laminator Bagel Digifav 520 B2 automatic laminating machine The machine is 100% functional, in perfect condition, ready for production. Very low mileage. It is an advanced, high-performance machine dedicated to digital printing houses. Production Spain. Technical data: Max sheet size: 520mm x 720mm Min sheet size: 220mm x 220mm Min weight: 130 gsm Max grammage: 350 gsm Operating temperature: 80-145°C Max working speed: 22m/min Weight: 750 kg Power supply 380V Additionally, 6 Bar air A steel, chrome-plated cylinder with a large diameter, filled with oil for greater operational stability. Pneumatic pressure, separation and automatic feeding from a high stack. Adjustable pressing force. Expanding shaft for attaching the foil, mounted on a tilting arm. Touch panel for easy operation. Sheet straightening module. Receiving table. Ask about the product Kodpfozyz A Rjx Afdjnb

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Kedpfx Aezvn Hzsfdenb Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit TM-102-K: Automatic Sheet Seperator with Quadruple Round Knife Seperating Unit: Quadruple Round Knife, Perforating Device Jogging Table (Delivery)

Condition: used, Year of construction: 2013, table width 6000 mm table length 2000 mm burner heads 1 Equipment: - Plasma source Kjellberg Hi Focus 161i - suction unit - Compressor Technical data Kjellberg Hi Focus 161i plasma cutter: Kedpfx Afoyk Dgzedsnb Cutting current at 100 % ED 10 - 160 A Marking current 5 - 25 A Cutting range 0.5 - 50 mm Piercing up to 30 mm Dimensions (L x W x H) 985 x 570 x 1140 mm Mass 206 kg

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, Working table 12500x2500 Plasma 3D Knodpezracysfx Afdeb Generator ESAB Precision Plasma Arc 360 Filter unit Sideros Oxy cutting torches 2pcs Uninstalling and installing is not included and has under the buyer's responsibility. Machine is available starting from October 2026.

Condition: used, Year of construction: 2020, functionality: fully functional, table length: 6,000 mm, table width: 2,540 mm, sheet thickness steel (max.): 50 mm, cutting length (max.): 6,000 mm, cutting width (max.): 2,540 mm, FICEP KRONOS KR25SP - CNC GANTRY PLASMA CUTTING SYSTEM FOR STEEL PLATES | YEAR 2020 The Ficep Kronos KR25SP is an automatic CNC gantry system for high-definition plasma cutting of steel plates, designed for steel construction and sheet metal fabrication shops that need precise, repeatable and cost-efficient parts directly from plate. With a maximum plate size of 2,540 x 6,000 mm and a plasma cutting thickness of up to 50 mm, it covers a broad range of parts in a single pass. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. The machine is fully functional and can be put into production immediately. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR25SP cuts steel plates fully automatically according to CNC program in gantry design. Using Hypertherm plasma technology including True-Hole technology, it produces contour-accurate cut parts and hole patterns at high cut quality - ideal for gusset plates, end plates, base plates and connection components in steel construction. The robust grid cutting table is prepared for connection to an extraction system; a network remote-diagnosis interface supports maintenance and support. TECHNICAL DATA - Manufacturer: Ficep S.p.A., Italy | Model: Kronos KR25SP (KRONOS SP series) - Machine type: Automatic CNC gantry plasma cutting system for steel plates - Year of manufacture: 2020 | Serial number: 36499 - Condition: used, refurbished by certified technician - Maximum plate size (W x L): 2,540 x 6,000 mm - Max. plasma cutting thickness: 50 mm - Plasma straight-cut torch: 1 | Plasma unit: Hypertherm XPR300 - Hypertherm True-Hole technology: available - CNC control and drives: Fanuc (to be confirmed on the machine during inspection) - Remote diagnostics: available (network connection) - Cutting table: robust grid construction, prepared for extraction system - Extraction and filter system: optionally available Further details (machine weight, connected load, footprint, cutting speed) are available on request. SCOPE OF DELIVERY - 1 x Ficep Kronos KR25SP gantry system (year 2020) - 1 x plasma straight-cut torch (Hypertherm XPR300) - Grid cutting table with extraction preparation - CNC control and drives - Remote-diagnosis interface (network) LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border - short transport distance from the entire DACH region. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) is your specialist for refurbished Ficep steel construction machinery. We supply inspected, ready-to-operate systems for steel construction and sheet metal fabrication. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Kedpfxev Iaqyo Afdsnb Sale exclusively to commercial customers (B2B).

Condition: ready for operation (used), Year of construction: 2004, ➢ Speed 10-80 m/min. ➢ Minimum Sheet Size: 22 x 30 cm ➢ Maximum Sheet Size: 72 x 102 cm ➢ Sheet Production: >10.000/h ➢ Sheet Weight SF: 100-600 g/m2 ➢ Adhevise Application SF: 1.5 – 4.0 g/m2 ➢ Working Width 72 cm ➢ Film Thickness 10-50 µM Kjdoyzcikepfx Afdonb ➢ Film Roll Diameter 350 mm ➢ Energy Consumption 24/66 kW ➢ It is Very Good Condition ➢ Available Immediately.

Condition: used, Year of construction: 2022, functionality: fully functional, table length: 6,000 mm, table width: 3,100 mm, sheet thickness steel (max.): 40 mm, cutting length (max.): 6,000 mm, cutting width (max.): 3,100 mm, drill diameter: 32 mm, Equipment: documentation/manual, FICEP KRONOS KR32SP - CNC GANTRY CUTTING SYSTEM PLASMA + DRILLING | YEAR 2022 The Ficep Kronos KR32SP is a CNC gantry cutting system for combined plasma cutting and drilling of steel plates in heavy steel construction. Plasma cutting, drilling, tapping, scribing and marking run in a single pass without intermediate handling. Built in 2022, among the youngest of its class on the used market. CONDITION & REFURBISHMENT Refurbished and inspected by a certified technician, ready for operation. - The exact scope of reconditioning varies from machine to machine and is disclosed individually upon serious interest. - Viewing possible by arrangement (machine reconditioned - no demonstration under power). FUNCTION & APPLICATION The KR32SP processes raw steel plates into finished components for steel construction. Plasma cutting, drilling, tapping, scribing and marking are combined on a single machine - a continuous workflow without re-clamping. Typical components: gusset plates, stiffener plates, end plates and connection plates. Target industries: steel construction, bridge building, tower construction and general metalworking. Plasma cutting is performed with a Hypertherm XPR300 power source; Hypertherm True Hole technology for dimensionally accurate hole quality is available. The scribing function transfers part numbers, bend lines and weld positions directly onto the component. CAD/DSTV connectivity and specific programming/interface details are confirmed on request. TECHNICAL DATA - Machine type: CNC gantry cutting system (plasma) | Product line: KRONOS SP - Control: Ficep PC-based CNC control - Manufacturer: Ficep S.p.A., Italy | Year: 2022 | Serial number: 36610 - Max. plate size (W x L): 3100 x 6000 mm - Max. plate thickness plasma (straight): 40 mm - Max. number of straight plasma torches: 1 | Plasma power source: Hypertherm XPR300 - Hypertherm True Hole technology: available - Number of drilling heads: 1 | Tool positions per drilling head: 6 - Max. drilling diameter: 32 mm - Spindle power (drilling head): 19 kW | Max. spindle speed: 3500 rpm - Cutting table: sturdy steel grid, prepared for extraction and filter system Ksdex H T H Rspfx Afdsnb - Marking/scribing function: available - Dual-gantry option (tandem): available | Remote diagnostics: available (network/VPN) - Combined processes: plasma cutting, drilling, tapping, scribing, marking SCOPE OF DELIVERY - 1 x Ficep KRONOS KR32SP CNC gantry cutting system (base machine) - 1 x straight plasma torch head (Hypertherm XPR300) - 1 x drilling unit with 6-position tool changer - 1 x cutting table (steel grid, 3100 x 6000 mm, integrated extraction preparation) - 1 x CNC control unit (Ficep PC-based, remote diagnostics via network) - 1 x hydraulic and pneumatic power unit - Technical documentation / operating manual - Further equipment and accessories on request LOGISTICS & LOCATION Location: Ulft (Netherlands), directly at the German border. Machine weight, footprint and electrical connection values follow on request. Dismantling, transport, installation and commissioning by ASM by arrangement - individually calculated upon request. ABOUT ASM Arendsen Steel Machinery (ASM) specializes in refurbished Ficep steel-construction machinery - from saw-drill lines to gantry cutting systems. Further Ficep systems on request. CONTACT / INQUIRY Arrange a viewing | Price on request | Request a callback. Sale exclusively to commercial customers (B2B).

Condition: excellent (used), Year of construction: 2017, operating hours: 52 h, machine/vehicle number: 1704476, Single-sided, sheet-fed, thin-film thermal laminator for long print runs. Maximum sheet size: 106 x 106 cm (41 3/4” x 41 3/4”), Minimum sheet size: 28.5 cm x 32 cm (11.5” x 12.5”), Maximum speed: 120 m/min (394 ft/min), paper weight from 115 gsm (80 lb text) to 650 gsm (24 pt). Quick setup, easy operation, robust construction. • Heidelberg Speedmaster feed head, rising pile, back separation, stream feeder, vacuum feed table, servo-driven mechanical front-lay registration, maximum pile height 1.2 m (47”). Water-heated chrome laminating roller. Knedpfx Ajzudqgsfdsb

Condition: used, Year of construction: 2014, operating hours: 182 h, functionality: fully functional, machine/vehicle number: 1404392, type of input current: three-phase, input voltage: 380 V, We are offering this used Autobond FL 106 X 145 laminating machine, manufactured in 2014. The control system was renewed in 2020. Since then, it has processed 232,314 sheets and run for 182 hours. Unfortunately, the values before the replacement were not recorded. Machine type: FL 106 X 145 Serial number: 1404392 Rated voltage: 380/415 + N V Patent number: Year of manufacture: 2014 Knjdpozkkmmofx Afdob If you have any questions or require further information, please feel free to send us a message or call us.

Condition: used, Year of construction: 2013, functionality: fully functional, Type: Automatic sheet-to-sheet laminating machine Manufacturer: Lamina system AB, Sweden Model: Laminating 1110 FA Year: 2013 Technical Specifications Max. sheet size: Width: 1100 mm Min. sheet size: Width: 200 mm /Length: 350 mm Top sheet: 130 - 450 gm/m2, 1 pts = 28.25 g/m2 Bottom sheet: from 250 gm/m2 Thickness: 0.6 - 10mm (0,016 - 0,39*) Glue: PVA type or as specified Feeder height: Top: 500 mm Bottom: 800 mm Registration accuracy:* < +/- 0.50 mm Operating speed:* Up to 3000 sheets/hour Total installed power: 4.0 kW Electrics: 400 V, 3-Phase, neutral, 50/60 Air requirements: 6 bar; 0.6 MPa or 80 psi Kedpfxexnzm Eo Afdsnb Approximately 500 lpm* Oil- and water free air

Condition: ready for operation (used), Year of construction: 2001, Used Ecotack thermal laminating machine Maximum sheet format: 102x142 cm Kjdpjzt R Ensfx Afdsnb Maximum speed: 75m/ minute Complete with vacuum register station Calender diameter: 450mm with oil heated central Roll elevator Automatic separator Spared rubberized roller Automatic separator Cooling roller with refrigerator Corrugated for light paper Automatic stacker

Condition: good (used), Roll Lam 120CS Roll Laminator Knedpfxjzuryvj Afdjb Double-sided cold lamination, original base included, Lamination width: 1200 mm Manufactured by: Biedermann GmbH Roll laminator equipped with silicone-coated rollers. Technical specifications: Working width / rollers: 120 cm Working width / roll width 130 cm Dimensions (W x D x H): 170 x 68 x 125 cm Infeed table height: 92 cm Weight (with base): approx. 168 kg Maximum board thickness: up to 25 mm Roller diameter: approx. 112 mm (silicone-coated) Maximum speed: approx. 3.5 m/min Power supply: 230 V / 0.07 kW

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, PAPERPLAST DRY 70 - 102, Samal 102X114, including 70 pallets of BOPP film. Year 2007 Currently in production in the UK Automatic thermal film laminator Automatic sheet feeder Vacuum infeed table Kedpsy Iy Nhjfx Afdjnb Laminating unit with heated chrome cylinder ICS heating unit Sheet separation unit, pile delivery unit Usable working width (mm): 1020 Minimum size (mm): 250 x 280 Maximum size (mm): 1020 x 1400 Mechanical speed: 70 m/min. Size: 102 mm x 116 mm Minimum size: 30 x 28 cm, speed up to 70 m/min. + approximately 70 pallets of film (list of offered films in the attachment).

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, type of input current: AC, Equipment: compressor, Foliant VEGA 400a Fully Automatic Laminating Machine Knjdpfx Afeyxyzrodeb

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working width: 760 mm, Mamy przyjemność zaoferować Państwu profesjonalny laminator termiczny ECOSYSTEM COMPACT 76, idealny do zastosowań przemysłowych w zakresie uszlachetniania druku. Urządzenie zostało zaprojektowane z myślą o wysokiej wydajności, niezawodności i precyzji laminacji różnorodnych materiałów. DANE TECHNICZNE • Maks. format arkusza (szer. x dł.): 760 x 1060 mm • Minimalny format arkusza: 210 x 250 mm • Maks. prędkość mechaniczna: 60 m/min* • Wydajność podajnika: do 10 000 arkuszy/godz.* • Gramatura papieru: 115 – 600 g/m² • Maks. szerokość folii: 750 mm • Średnica rolki z folią (maks.): 350 mm • Średnica wewnętrzna rolki z folią: 3” • Wysokość robocza (z paletą): 900 mm • Maks. waga stosu (z paletą): 750 kg *Wydajność zależna od materiałów i doświadczenia operatora. ZASILANIE I INSTALACJE TECHNICZNE • Zasilanie: 400 V, 3-fazowe + PE, 50 Hz • Moc zainstalowana: 31 kW • Sprężone powietrze: 700–900 nl/min przy 8 bar (Sprężarka nie wchodzi w zakres dostawy.) Knsdpfeypd Szsx Afdjb ZESTAW ZAWIERA • Automatyczny podajnik z elektronicznie sterowanym stołem ssącym (system PIAB) • Odwijak folii z przycinaniem bezpośrednim • Zespół laminujący z chromowanym kalandrem i gumowym wałkiem dociskowym • Zewnętrzny podgrzewacz wody z armaturą i zaworami • Grupa separacyjna z systemem nacinania folii • Gorący nóż z laserem korekcyjnym Scatec – do cięcia folii metalizowanych PET, nylonowych, tłoczonych i specjalnych. Opis funkcji: System gorącego noża umożliwia precyzyjne i czyste oddzielenie folii od krawędzi arkusza po laminacji, niezależnie od rodzaju materiału. Zintegrowany laser korekcyjny Scatec odpowiada za bieżącą kontrolę położenia arkusza oraz automatyczne dostosowanie pozycji cięcia, co zapewnia idealne wyrównanie folii względem krawędzi druku. To rozwiązanie minimalizuje błędy i zwiększa powtarzalność procesu, nawet przy dużych prędkościach produkcyjnych. • Automatyczna sztaplarka • Panel dotykowy sterowania • System zdalnej pomocy (Ethernet – po stronie klienta) • Instrukcja obsługi zgodna z normami CE • Zapasowa rolka dociskowa z łożyskami i specjalnym wózkiem

Condition: good (used), Year of construction: 2001, functionality: fully functional, Automatic Sheet Feeder A-20-P (Pile Table, Mabeg Suction Head, Double Sheet Control, Suction Belt Table) Automatic Laminating Unit EK 102 (Waterbased & Thermal) Seperating Unit BAT 102 Automatic Stacker S-3 Max. Sheet Size X : 1020 mm Max. Sheet Size Y : 1140 mm Min. Sheet Size X : 210 mm Min. Sheet Size Y : 210 mm Production Capacity Max : 50 m/min Kjdpfx Ajzv S R Defdjnb

Condition: used, Year of construction: 1987, Max. Sheet Size X : 760 mm Max. Sheet Size Y : 1020 mm Min. Sheet Size X : 320 mm Min. Sheet Size Y : 460 mm Production Capacity Max : 35 m/min Knodpfxeikq Hhs Afdsb Technical data can vary according to job, consumables and possible other factors

Condition: good (used), Year of construction: 2008, Offer 26289 Approximate technical specifications: - CNC flame cutting machine with 2 torches, as shown in the picture - 2 torches with adjustable height and inclination - Track gauge approx. 4.2 m - Track length approx. 7.5 m - Track height approx. 0.5 m - Supporting table - Space requirement approx. L 8 x W 7.5 x H 2.3 m - Weight approx. 3 tons - Without supporting table! Kedpfjzvnb Ssx Afdenb

Condition: used, Year of construction: 1989, A machine for applying glue to cardboard. Technical parameters: Kjdjua H Hmjpfx Afdonb - working width: 170 mm - machine dimensions: 5800x2400x1800 mm - power supply: 400V Technical condition: used machine, to be reviewed

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Komfi Delta PLUS fóliázó gép B/2 méret ÉVJÁRAT:2005 Sérülésmentes Kedpfezznz Aex Afdjnb tépő egység aparátos berakó egység hengerek jó állapotban vannak, azzonal munkába állítható jelenleg használaton kívül, raktárban van.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, CNC oxy-fuel cutting machine in very good condition, lightly used. Knodozhby Sepfx Afdob

Condition: used, functionality: fully functional, Type: Automatic sheet-to-sheet laminating machine Manufacturer: Lamina system AB, Sweden Model: Laminating 1420 FA Technical Specifications Max. sheet size: Width 1420 mm Min. sheet size: Width 200 mm /Length 350 mm Top sheet: 130 - 450 gm/m2, 1 pts = 28.25 g/m2 Bottom sheet: from 250 gm/m2 Thickness: 0.6 - 10mm (0,016 - 0,39*) Glue: PVA type or as specified Knedpfx Asxnzmfefdeb Feeder height: Top: 500 mm Bottom: 800 mm Registration accuracy:* < +/- 0.50 mm Operating speed:* Up to 3000 sheets/hour Total installed power: 4.0 kW Electrics: 400 V, 3-Phase, neutral, 50/60 Air requirements: 6 bar; 0.6 MPa or 80 psi Approximately 500 lpm* Oil- and water free air

Condition: used, Year of construction: 2008, GENERAL TECHNICAL DATA: Performance Mechanical speed: up to 450 m/min Production speed: depending on substrates and adhesive system Web & Dimensions Maximum web width: 1330 mm Maximum laminating width: 1315 mm Minimum web width: 600 mm Roll Specifications Maximum roll diameter: • Unwinder: 1000 mm • Rewinder: 1000 mm Core diameters: • Unwinder: 3” / 6” (76 / 152 mm) • Rewinder: 6” (152 mm) Web Tension Unwinding: 500 N Rewinding (with taper tension): 550 N Electrical Data Voltage: 3 × 400 V ±10%, 50 Hz (without neutral) Total installed power: 85 kW Maximum input current: 120 A Main switch: 150 A Pneumatic Requirements Pressure: 6 – 9 bar Consumption: 70 l/min Feed connection: 1/2” Hydraulic System Pressure: 3 bar Cooling consumption: up to 2700 l/h Feed connection: 1/2” Cooling System Water pressure: max. 5 bar Water temperature: 15–20°C Temperature difference: 4°C Pressure difference: 2.5 bar Flow rate: 2000 l/h Machine Configuration Knodey Er A Ujpfx Afdsb • Shaftless unwinder (primary & secondary) • Shaftless rewinder • Automatic web guiding system • Adhesive metering system (5-roll application unit) • Laminating unit with pressure rollers • Cooling calender • PLC-controlled drive system • Touch screen control interface Materials (Supported) • Aluminium (ALU) • BOPP • LDPE / LLDPE • Nylon (Cast) • OPA • PET / PETP • PP (Cast) • Paper Material Thickness Range Films: approx. 7 – 200 µm (depending on material) Paper: 40 – 200 gsm Working Conditions Temperature: 10 – 40°C Humidity: 30 – 90% (non-condensing) Additional Equipment • Optional water chiller: approx. 21 kW cooling capacity • Closed-loop cooling system possible Control & Automation • PLC control system • Inverter-driven motors • Recipe storage (up to 500 jobs) • Production monitoring (speed, meters, tension) • Emergency stop system