Used Lapping Machine for sale (83,999)

Condition: excellent (used), For sale: Joke single-disc precision lapping machine, model EL 600. The machine is in excellent condition. Dodpfsx A Ebcox Addocr

Condition: used, Year of construction: 2002, crown gear diamter max. 500 mm distance crown gear spindle - front pinion spindle 150 - 350 mm distance pinion spindle - front crown gear spindle 120 - 340 mm control GE FANUC Series 160i-M Dedpjvxwpuofx Addecr 70 mm pinion turning speeds max. 0 - 3.000 mm crown gear turning speeds max. 0 - 2.600 U/min inner taper pinion spindle Ø 99,2 mm inner tape crown gear spindle Ø 99,2 mm rated current 30 A weight of the machine ca. 6,40 t dimensions of the machine ca. 2,40 x 2,20 x 2,10 m Own lapping system included Was also operated at a lapping center

Condition: good (used), Slapmaster Lapping Machine - Lapping plate: 900 mm - Lapping rings: 360 mm - The machine offers a lapping area equivalent to a 1000 mm lapping machine thanks to the recesses Good condition, fully functional. Can be viewed and tested under power on site. Worldwide shipping available. Dcodpfex Dzf Hjx Addjr Inspection: Please note that, in order to avoid misunderstandings, the item can be inspected and tested under power before purchase. Please ask any questions prior to purchase to avoid uncertainties. For general inquiries or to schedule an appointment for viewing, I am available at the phone number listed below or above at any time. Subject to prior sale and errors in the description. VAT will be shown separately on my invoices. Shipping via freight carrier.

Condition: good (used), LAPPING MACHINE Hahn & Kolb LHD 0 -Machine from a government institution / Original condition -Lapping plate diameter 400 mm -Max. workpiece height 120 mm -Max. distance between the cast lapping plates 80 mm -Speed range 40-80-160 rpm -Drive motor speed 700/1400/2800 rpm -Total power 1.8-2.7 kW -Facing device – manually operated -Various lapping cages -Documentation Dimensions: Djdpsx Dy S Eefx Addscr LxWxH 1.4x1.3x1.9 meters / Weight: 1600 kg Errors and input mistakes excepted.

Condition: ready for operation (used), Wolters 3 R 600 lapping machine 3 stations flat lapping machine Year of manufacture: 2001 Grinding wheel: 600mm Rated current: 16A Operating voltage: 400 V Stepless speed 3 workstations no lapping agent pump available. You are welcome to come by for an inspection. You will receive a proper invoice. For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. Visit our store and see our other offers. Dodsir Inaopfx Addecr Indicated company names and trademarks are the property of their owners and serve only for identification and description of the products. Deviations from technical data and errors in the description of the article can happen and remain reserved.

Condition: not inspected (used), Year of construction: 2002, functionality: not functional, disc diameter: 1,000 mm, Double-disc lapping machine hydraulically operated Disc diameter, outer Ø 1010mm, inner Ø 310mm Planetary gear unit, type 28/5, optionally 6 Carrier plate, type T28, quantity 5, optionally 6 bar Hydraulics 6 bar Electrics, 400V, 50 Hz, 230V Measuring control, +/- 2µm accuracy Upper drive, 2–160 rpm Lower drive, 2–160 rpm Inner pin ring 2–50 rpm Weight approx. 4000 kg Dimensions (LxWxH) approx. 4560x3830x2900 mm Machine can be inspected Dodpfx Aog E I Npsddocr Delivery: EXW as inspected Payment: strictly net after receipt of invoice

Year of construction: 2001, condition: good (used), table diameter 200 mm workpiece height 100 mm number of wheels 1 Control Robot CNC total power requirement 6 kW weight of the machine ca. 1,8 t dimensions of the machine ca. 1,83 x 2,04 x 2,1 m Technical data - Grinding capacity : Ø 0.025 –12.7 [mm] - Bar diameter : Ø 1.0 –12.7 [mm] - Grinding length : W15 (option W20) - Z-axis : 35[mm] Resolution : 0.5 [µm] – X- axis : 25 [ mm] Resolution : 0.1µm – Y-axis : 286[mm] Resolution : 0.5µm – U- axis : 15 [mm] Resolution : 0.1µm Head Motor: 0.70 [kW] Rotation: 300 – 3000 [rpm] Grinding - Raw grinding : 1.5 [kW] Spindle : Ø 60 [mm] Grinding wheel Dcjdpfx Aett Tb Deddsr diameter : Ø 200 [mm] Cutting speed : 30 m/sec. - Completion: 0.75 [kW] Spindle: Ø100 [mm] Grinding wheel diameter: Ø150 [mm] Cutting speed: adjustable - Dimensions (L x W x H): 1830 x 2040 x 2100 mm - Weight: approx. 1800 [kg] Accessories - Loading and unloading robots - Fire protection device CONTROL axes; 4 axes + 2 programmable robots - simultaneously linear interpolation of the 4 axes + cylindrical interpolation of 2 robot axes

Condition: used, Hahn & Kolb lapping machine, double sided lapper, 800mm diameter wheels. (20) 300mm dia carriers, 7708 hours, approx dimensions 6ft x 4 ft x 6ft high, no coolant tank. Dedpfexqgflex Addscr

Condition: used, Year of construction: 1969, Reishauer DS / zum läppen weight of the machine ca. 200 kg Djdpfx Ajg Si R Ujddscr +++++ Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: excellent (used), Year of construction: 2013, operating hours: 250 h, Lapping Machine Stähli FLM 750 Manufacturer: Stähli Läpp Technik AG Model: FLM 750 Year of manufacture: 2013 Voltage/Frequency: 3x400V + N + PE / 50Hz Dodpfxjxpnnxo Addecr Power consumption: 11.5 kW Max. current: 25 A Weight: 2500 kg Rotary table diameter: 750 mm Inner diameter of conditioning ring: 300 mm Rotational speed: 6–75 rpm Drive power: 4.0 kW Number of pneumatic cylinders: 3 pcs Compressed air supply: 6–10 bar Dimensions: 1700 x 1250 x 2200 mm Noise level:

Condition: not inspected (used), functionality: unexamined, overall weight: 1,000 kg, table diameter: 600 mm, No minimum price – guaranteed sale to the highest bidder! The payment deadline for the machine is 20/11/2025! Placing a bid obligates you to collect the machine on time between 01/12/2025 and 05/12/2025! TECHNICAL DETAILS Lapping diameter: 600 mm Dcsdpexni R Sofx Addsr MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,100 x 1,100 x 1,300 mm Weight: 1,000 kg

Condition: good (used), Year of construction: 2018, functionality: fully functional, disc diameter: 1,600 mm, Single-disc fine grinding or polishing machine For large components Workpiece holder Ø 1600 mm Tool Ø 500 mm to 525 mm, can be fitted with various fine grinding or polishing pads Control S7 with HDMI Dcedpfowrpclex Addor KSM tank 50 liters Polishing agent circulation system 50 liters Main drive 11 KW

Condition: good (used), Lapping wheel diameter 500 mm Inner diameter of dressing rings 230 mm Speed of lapping wheel 0-100 rpm Working pressure 0-400 kg Dcsdpfx Aog Smwheddor MARCELS MASCHINEN CH

Condition: good (used), Flexibox Lapping Machine Dodjxphwtspfx Addjcr Rotary Table Dia: 1000mm 3 Conditioning Rings (450mm Dia) Machine Guards

Condition: like new (used), Year of construction: 2018, functionality: fully functional, Used CNC lapping machine Make: MELCHIORRE S.r.l. Model: ELC Type: 1500 Year of manufacture: 2018 Dcodpfx Adoxg Ncxjder Serial No: 2780/08 Weight: 14,000 kg

Condition: good (used), Peter Wolters AC500 lapping machine TECHNICAL DATA AND SCOPE OF SUPPLY TECHNICAL DATA Rolling device size: 42 TS 7/14 Working disk diameter: 415 mm Ring width: 54 mm Working disk thickness: 50 mm Possible wear of the disks to approx.: 20 mm Number of rotor disks: 14 Drive data: 380 V / 50 Hz Upper disk drive: 1.0 / 1.4 kW Worm gear motor: 56 / 112 rpm Lower disk drive: 1.0 / 1.4 kW Worm gear motor: 500 / 100 rpm Workpiece drive: 0.5 / 0.7 / 0.9 kW 3-pole worm gear motor: 6 / 18 / 36 rpm Tilt arm drive: 0.25 kW Digital load adjustment of the upper work disk: 0-250 daN Connection data Dcsdpfx Aotxitveddor Electrical connection: 5.0 kW Compressed air connection: 5-7 bar Compressed air consumption: Approx. 8 Nl/min OFFER SCOPE U.A: (list not exhaustive): Peter Wolters AC 500 lapping machine / fine grinding machine 1 inverter per motor documentation Exact scope of offer according to photo gallery No responsibility is taken for the correctness, completeness and up-to-dateness of the information.

Condition: used, Type Läppmaschine In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as Dedpfewzmxpjx Addjcr subject to prior sale!

Condition: ready for operation (used), functionality: limited functionality, disc diameter: 525 mm, Weight approx. 1,900 kg Dimensions (LxWxH) approx. 1,800x1,500x2,200 mm Working disc diameter 525 mm Largest disc ring width 175 mm Largest workpiece dimension 170 mm Speed of the working disc 45/70/90/140 rpm Main drive performance 4.0 kW Dcedpfx Adoh Invrjder Connection 400V/50Hz Emergency stop switch Conventional control with control panel Full-fledged lapping machine, conventional control

Condition: new, Year of construction: 2025, machine/vehicle number: SÇ 211 Alüminyum Pvc Orta Kayıt Alıştırma Makinesi ( 2 Bıçak), - Conforms to CE standards. - Possibility of lapping the middle register connections of PVC and aluminum profiles. Dsdpfsq U S Ahex Addocr - Up to 30 degrees at different angles, possibility of lapping the middle register connections of profiles - Pneumatic profile clamping system B7ull38nwa - Ability to move the milling motor with a pneumatic cylinder. - Easy series change thanks to the separator button (60-70) OPTION - Hydro check system - Cooling System

Condition: excellent (used), Year of construction: 2005, operating hours: 23,900 h, functionality: fully functional, machine/vehicle number: 503982, STAEHLI DLM-705 FLAT LAPPING MACHINE Country of origin: CH Dimensions: 3300x1970x2600 mm Dcedjw Uc Hnspfx Addjr Net machine weight: 8000 kg TECHNICAL SPECIFICATIONS Outer diameter of lapping plates: 705 mm Number of satellites: 4-8 Distance between lapping plates: < 390 mm Programmable working pressure for parts to be machined: 0-200 daN Stop precision: 0.1 µm Programmable rotational speed for the lapping plates Flat honing and micro-finishing: 0-250, 300, 400, 600 min⁻¹ Central drive: 0-125, 220 min⁻¹ Machining accuracy: 0.1 µm Subject to errors or omissions; technical data is provided without guarantee.

Condition: not inspected (used), Year of construction: 1996, empty load weight: 800 kg, Diameter 1.5 - 160 mm Stroke 400 mm Djdpfjwgm Sasx Addjcr Weight 800 kg Tools

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Type: Peter Wolters AC500F Double-Sided Fine Grinding Machine Very clean and extensively refurbished AC500F. Dedpfx Aoxbucmjddjcr Equipped with new Siemens PLC+HMI control as well as Siemens software. All bearings, seals, and bellows replaced with new components. All pneumatic and metering hoses are new. New hood with monitoring. This machine features a loading table and a medium lifting station. Full documentation available. Immediately available. Year of manufacture: 2001, overhauled 07/2025. Drives: 3 kW up to 300 RPM, 250 DaN, T15 gear motion. This machine comes with a warranty.

Condition: used, Year of construction: 1976, table diameter mm workpiece height mm number of wheels 2 Dcsdpfsub Aluex Addor total power requirement 11 kW weight of the machine ca. 4,2 t dimensions of the machine ca. m

Condition: used, Year of construction: 2015, functionality: fully functional, grinding wheel diameter: 914 mm, - Weight approx. 1600 kg - Dimensions (LxWxH) 1,820x1,820x2550 mm - Tool diameter 914 mm - Working disk diameter 36 inches - 4 stations with 304 mm inner diameter each - PLC control Siemens S7 - Separate control cabinet - Tool cooling - Protective cover over linear guides - Station forced drives for conditioning rings - KSS circulation system - 7.5 KW spindle operation - Machine table diameter 1,800 mm - Control cabinet 800x550x2,200 - CE conformity available - Bosch safety concept - Use until decommissioning for honing flat surfaces for injection systems - Machine is ready for operation - Machine is in good condition, constant preventive maintenance Djdpfxovu Agdo Addocr - 2 CBN tools (new price of a tool approx. 30,000.00 €)

Condition: good (used), Year of construction: 2006, functionality: unexamined, machine/vehicle number: 06 03 1000, Country of manufacture: CH Voltage: 400V Dimensions: 1200 x 1650 x 2050 mm Net machine weight: 1900 kg TECHNICAL SPECIFICATIONS Machine: Disc rotation speed: 0–110 rpm Maximum drive power for discs: 2 kW Maximum upper disc load: 20 daN Disc diameter: Ø 450 mm Internal drive rotation speed: 0–115 rpm Maximum internal drive power: 0.5 kW Disc drive motors (continuous motor): Type: DC motor Armature voltage Ua: 260 V Dodpfx Adsw T Tpdsdecr Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 2 kW External ventilation: 220V, 50/60 Hz Internal drive motor: Motor type: smooth operating mid-position control motor Armature voltage Ua: 260 V Field voltage Ue: 340 V Rotation speed: 3110 rpm Power: 0.5 kW Separate ventilation: 220V, 50/60 Hz Vertical drive motor: Type: stepper motor Steps per second: 50 Torque: 1100 Nm Crown gear adjustment: Type: AC brake motor 2 positions Voltage: 380V / 50 Hz Rotation speed: 700–1400 rpm Power: 0.25/0.37 kW DC brake: 24V Braking torque: 16 Nm Power converters: Input voltage: 380V / 50 Hz Induced voltage: 270 V Field voltage: 340 V Worm gear reduction ratio (internal drive): Ratio: i = 1 : 30 Worm gear reduction ratio (lower system): Ratio: i = 1 : 15.5 Worm gear reduction ratio (upper system): Ratio: i = 1 : 15.5 Operating pressure: Air circuit: 6–7 bar Lapping fluid pump: Connection voltage: 380V 50Hz Rotation speed: 2600 rpm Flow rate: 57 L/min Protection: IP 44 Control and measurement device: Measurement range: 6 (±3 to ±11000 mm) See details in Millitron user manual Inductive probe: Measurement range: ±2 mm Setpoint adjustment device: Display: 4 digits Unless stated otherwise, all technical data are provided without guarantee and subject to change or error.