Used Flat Bed Grinding Machine for sale (67,985)

Condition: used, machine/vehicle number: 008381, X axis working area: 4250 mm Y axis working area: 2280 mm Working Table: Flat table Main Electrospindle power: 12 KW Number of controlled axes: 5 axes Total number of drilling spindles: 11 Nodjx Swc Hjpfx Ah Rokw Total number of tool changer positions: 24

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € 350 mm 300 mm 500x160 mm 350x150 mm 300x150x55 mm 2800 1/min 3,6 kW 1020 mm 820 mm 2170 mm 440 kg Dm. 200x78x78 mm This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened Nkjdpfxsywcl Re Ah Rjw by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: reconditioned (used), functionality: fully functional, The machine is retrofitted and modernized in 2025. The modernisation consists of adding the automatic infeed and auto cycle functions. The HMI and operating panel is offered in English, German and French. Dimensions Grinding Wheel (OD x ID x width) Ø 350 x Ø 127 x 100 mm Nodpfx Ahsvtl Rpj Rekw Grinding wheel width 100 mm Ø min / max to rectify 1.5 / 50 mm No. infinite grinding wheel speeds Min / max speed of regulating wheel (r.p.m.) 10/250 rpm Infeed : Auto Auto cycle : Yes Dressing : Manual Dimensions Regulating Wheel (OD x ID x width) Ø 230 x Ø 76.2 x 100 mm Regulating wheel width 100 mm Maximum length to be rectified in plongeé 200 mm Length 1800 mm Width 1300 mm High 1600 mm Weight 2000 Kg Accessories: New Coolant tank with paper filtration system

Condition: ready for operation (used), - USED - SURFACE GRINDING MACHINE MAX GRINDING LENGTH: 1015 mm MAX GRINDING WIDTH: 405 mm Nksdpjh St Dqjfx Ah Rsw MAX GRINDING HEIGTH: 350 mm MAGNETIC CHUCK: 400 x 1000 mm GRINDING WHEEL SIZE: 50 x 127 x 350 mm MOTOR POWER: 3,7 kW WEIGHT: 3600 Kg OVERALL DIMENSIONS: 3500 x 1700 x 2000 mm ACCESSORIES: DRESSING TOOL

Condition: new, grinding band dimension 150 x 2000 mm band speed 33 m/sec weight of the machine ca. 105 kg engine output 4 kW turning speeds 2800 U/min Nedpfoyv N Agjx Ah Rekw Accessories / equipment: - Vibration-free running smoothness - Adjustable working height - S1 motors with 100% duty cycle - Surface and contact grinding possible - Removable protective cover for surface grinding - Connection piece for double suction - Built according to the CE standard

Condition: new, width of the strips 150 mm Njdpeyv Nb Njfx Ah Rokw band length 2000 mm band speed 16,5/33 m/sec total power requirement 2,6/3,37 kW turning speeds 1400/2800 U/min weight of the machine ca. 95 kg Equipment / Accessories: - Removable dust catcher - Fine adjustment of the band adjustment - Sanding belt - Eye protection - Motor protection switch - Operation manual - Sanding table - working height adjustment - surface grinding pad

Condition: new, neu ca. 2 Wochen ab Auftragse Italien 17940 € 344.45 € Dm. 200x78x78 mm 2800 1/min 300 mm 300x150x55 mm 350x150 mm 500x160 mm 3.6 kW 1020 mm 820 mm 2170 mm 440 kg This Grinding machine with fixed table derives from the model R.V. 500 but it differs from it as it is equippedwith a long column supported by four bearings and is opportunely stiffened by a sturdy column support. This Surface grinding machine, due to its stiffness and geometrical stability, is highly suitable for grinding with precision pieces of notable height: single or mass-produced die-shop components, moulds, punches, gears and others. Moreover, the nuts of the vertical translation screw and the dowels to realign the wheel motor to the axis,equipping this model of Grinding machine with fixed table, allow preserving perfect work conditions over the years, too. CAST IRON BED to maintain the geometric stability of the grinding machine in time, too. CAST IRON COLUMN, protected by bellows and supported by four adjustable precision bearings, broadly sized for this type of grinding machine with fixed table. Three-phase MOTOR air-cooled by double jacket, to prevent the overheating of the grinding machine motorduring continuous machining and to keep the temperature of the motor shaft and of bearings constant. Hardened, ground and dynamically balanced SHAFT, supported by precision ball bearings, widely sized for this type of grinding machine with fixed table and self-adjusting by means of springs for the backlash preload, to absorb thermal expansions. VERTICAL TRANSLATION SCREW supported by opposite and adjustable ball bearings, with apt motion for maintaining, in this model of grinding machine with fixed table, the wheel work field free from hindrances and for avoiding dust depositions. Metal BELLOWS for a better protection of the vertical translation screw of the grinding machine. Opposite bronze NUTS, for the recovery of the eventual wear in time of the vertical translation screw of the grinding machine with fixed table. REGISTRATION DOWELS to re-align the wheel motor of the grinding machine to the axis, obtaining parallel surfaces also in time. HANDWHEEL of the grinding machine, supported by three bearings and engaged on the screw by means of a pair of helical gears, equipped with graduated drum, supported by a trust bearing, for a stock removal of mm 0.01 - 0.02 - 0.03 for each single pass; the rapid feed per handwheel turn is mm 2. KNOB WITH JACK, for the programmable micrometric feed of mm 0.01 - 0.02 - 0.03 - 0.04 per pulse, which allows a simple use by avoiding the constant increment control. SLOT to permit the maximum use in height of the work field of the grinding machine wheel and to clamp non-magnetic parts and accessories such as: magnetic chuck, self-centering chuck and squares. Nkjdpfx Ahoyv Iqvo Rjw Low-voltage CONTROLS, protection, indicator light and all requisites to comply with safety and conformity regulations provided for this type of grinding machine with fixed table. HANDLES, SHAPES AND SIZES of the grinding machine with fixed table designed to meet the current ergonomic recommendations for work. WITH FOLLOWING ACCESSORIES: Magnetic chuck 300 x 150 mm Wheel flange and cup wheel Semiautomatic dresser with diamond Coolant system Operating manual in German or Italian

Condition: used, machine/vehicle number: 3401-1/33 18, This WMW surface grinding machine SFW is being auctioned in our industrial auction/bankruptcy machinery auction for MarGenius GmbH & Co. KG – machinery, tools, materials, and office equipment, conducted online. You will find this and many other lots on our platform. Nkodpoyxdz Ajfx Ah Rjw

Condition: used, Year of construction: 2019, Technical details: Nkjdpsywx Ihofx Ah Rjw max. wheel diameter: 1000 mm gear width: 250 - 800 mm max. module: 15 cycle time: 1017 h min. module: 20 max. table load: 4000 kg clamping diameter: 600 mm total power requirement: 80 KVA weight of the machine ca.: 20 t dimensions of the machine ca.: 5,0 x 6,5 x 3,7 m

Condition: good (used), Year of construction: 2006, functionality: fully functional, center height: 100 mm, workpiece weight (max.): 35 kg, grinding length: 500 mm, grinding diameter: 125 mm, overall weight: 1,800 kg, input voltage: 400 V, For sale: 1 used grinding machine. Manufacturer: Knuth Werkzeugmaschinen GmbH. Model: RSM 500. Year of manufacture: 2006. Technical data: Centre height: 100 mm; Max. grinding diameter: 125 mm; Distance between centres: 520 mm; Max. grinding length: 500 mm; Max. workpiece weight: 35 kg; Internal grinding diameter: 10 - 40 mm; Internal grinding depth: 50 mm; Spindle taper: MK4; Tailstock: MK2; Weight: 1,800 kg. Documentation available. The machine can be inspected at our warehouse in 09599 Freiberg. Njdpfxexzrvwo Ah Rskw

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Njdpfx Ahevvkipj Rokw

Condition: used, Year of construction: 2022, Oscillating cylinder grinding machine – technical specifications: A possible screwed version for spindle sleeve clamping. Something similar to the ProLoc device is used. Storage location: Nattheim. Njdpfx Ahowhqprs Rekw

Condition: used, Year of construction: 2022, Oscillating cylinder sanding machine, technical specifications: A possible screw variant for spindle sleeve clamping. Something similar to a ProLoc device is used. Storage location: Nattheim Njdpfxswhqple Ah Rokw

Condition: good (used), ELB-SCHLIFF SW10 VA II Surface Grinding Machine Nedoiam Nwspfx Ah Rskw Table Dimentions: 1000/300 mm Machine Dimentions (LxWxH): 2800x1600x2300 mm Weight: 3500 kg Cooling System (LxWxH): 1400x1000x800 mm Electrical panel (LxWxH): 1500x1000x450 mm

Condition: used, Make: DISKUS-WERKE, Model: ModuLine DS 300 SO, Year of manufacture: 2013, Machine No.: 2219, Control system: Siemens, Model Sinumerik 840D sl, 2 spindles, spindle distance 210 mm, max. speed approx. 4000 rpm, W-tool spindle / grinding spindle 2000 rpm, max. workpiece diameter 100 mm, max. workpiece height 40 mm, 8-position tool turret, manufacturer Sauter, model 0.5.480.516, tool holder type Capto C5, workpiece automation device, manufacturer DVS, model Moduline, transfer robot manufacturer Epson, PLC system control by Siemens, display with Simatic Panel Touch, coolant system by Knoll, type KF150/950, paper band filter, chip conveyor by Knoll, type 225S-2/170 Nkjdpfxjx Ahg Uo Ah Rjw +++ Note: This machine is part of an online surplus sale! +++

Condition: used, Make: BUDERUS, Model: CNC235, Year of manufacture: 2007, Machine no.: 9030, Control system: Siemens brand, Type: Sinumerik 840D sl Powerline, 2 workspaces, 2 cross slides, X/Z traverse path, 2 spindles, Speed, C-axis workpiece spindle: 3,000 [rpm], High-frequency internal grinding spindle: (51,000 [rpm]) (for grinding arbor), Max. feeds Z 30 m/min, X 90 m/min, Max. workpiece diameter: 100 mm, Max. workpiece length: 50 mm, 2x 8-position tool turret, Tool holder: Capto C5, Workpiece automation with drag conveyor system and gripper, Coolant system, Paper band filter, Oil separator, Manufacturer: Mahle, Type: LGA601, Oil mist extraction, Recooling unit, Manufacturer: Hydac, Chip conveyor, Manufacturer: Astos +++ Note: This machine is part of an online surplus sale! +++ Nkedpfsx Ahivsx Ah Row

Condition: used, • Throughput capacity: up to approx. 50 liters/minute • Tank volume: 0.3 m2 • Tank material: polyethylene (UV-stabilized) • Sedimentation granulate Sediflock: powder form (according to manufacturer specifications) • Sludge bag approx.: 70 kg • Compressed air: 6 bar Nksdpeywizxefx Ah Row • Power connection (depending on pumps): 2 kW, 400 V/50Hz – 3NPE • Dosing of sedimentation granulate: automatic • Serial number – B085.23 • Further information can be found below • Price on request

Condition: good (used), Year of construction: 2007, workpiece dia. 1400 mm boring diameter 100-500 mm Nkedpowzmqrsfx Ah Row control Sinumerik 840D

Condition: good (used), Year of construction: 2013, Grinding wheel 400 x 203 mm Regulating wheel 225 x 127 mm Fire extinguishing system Kraft u. Bauer Knoll microfilter Steuli lifting station Nkedsyxl Dropfx Ah Rjw

Condition: good (used), Code: 0345 Nsdsyxf Ttjpfx Ah Rskw Brand: STROMAB Model: KGS 650 - CE Standard Automatic knife grinding machine for planer knives, knife blades and straight tools – CE Standard Technical data: Max working length 650 mm Grinding motor power 0,75 Hp External diameter of the grinding wheel 127 mm Grinding wheel feed per stroke 0,01/0,05 mm Carriage feed motor power 0,15 Hp Carriage feed speed 12,5 mt/min Tilting grinding wheel motor unit Base with tool storage shelves Overall dimensions mm 1200 x 500 x 1300 h Weight kg 103

Condition: used, Year of construction: 1995, functionality: fully functional, Drum Grinding and Polishing Unit Manufacturer: UHLIG, Type UB 22 Year: 1995 Njdpfeyw Rhmsx Ah Rjkw Technical Data: Make: Werner Uhlig Model: UB 22 Year of manufacture: 1995 Drive: Worm gear with motor Rotational speed: 5.6 – 54 l/min Shaft diameter: 25 mm, max. torque: 34 Nm Motor power: 0.25 kW Dimensions: approx. 1.00 x 0.90 x 1.20 m Weight: approx. kg (not specified) Equipment: - Control with frequency inverter - 2 single-chamber drums, approx. 200 mm wide, diameter 260 mm - Infinitely variable drum speed - Fresh water rubber hose - Waste water drain connection All details are subject to change without notice. A demonstration under power is possible at any time in our exhibition hall.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 04121522, total length: 10,000 mm, total width: 2,300 mm, total height: 1,500 mm, overall weight: 6,200 kg, input current: 64 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 380 V, power: 34 kW (46.23 HP), operating speed: 5 mm/s, Manufacturer: Bovone Model: ELB 14-45 Year: 2004 Power: 34 kW Voltage: 380 V Nodpfsyw Udrox Ah Rekw Frequency: 50 Hz Weight: 6200 kg Machine type: Glass straight line edging machine Application: Grinding and polishing flat glass edges Origin: Italy Applications Suitable for: • Flat glass processing • Mirror manufacturing • Furniture glass production • Architectural glass • Interior glass elements • Glass fabrication workshops

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 02022512, total length: 8,200 mm, total width: 1,200 mm, total height: 2,300 mm, overall weight: 3,400 kg, type of input current: three-phase, input voltage: 380 V, working height: 900 mm, power: 30 kW (40.79 HP), operating speed: 5 mm/s, Manufacturer: Bovone Model: ELB 10 Machine type: Glass straight line edging machine Year: 2002 Power: 30.5 kW Voltage: 380 V Njdpeyw Ucbsfx Ah Rekw Frequency: 50 Hz Weight: 3400 kg Machine configuration: Straight line glass edging and polishing Origin: Italy Applications Suitable for: • Flat glass processing • Mirror manufacturing • Furniture glass production • Architectural glass fabrication • Interior glass elements • Glass workshops and factories

Condition: used, Year of construction: 2000, functionality: fully functional, Used Cylindrical Grinding Machine Reckord M 1432 B The Reckord M 1432 B is a high-performance universal cylindrical grinding machine that combines maximum precision with robust construction. With a minimum infeed setting of just 0.0025 mm and outstanding roundness accuracy, it is ideal for demanding grinding tasks in both single-part and series production. Your advantages at a glance: Maximum precision: Minimum grinding wheel infeed of 0.0025 mm ensures top surface finishes and form accuracy. Exceptional flexibility: External, internal, and face grinding – swiveling workhead (+90° / -30°) and table (+3° / -6°) for tapers and complex geometries. Robust construction: Heavy-duty machine bed weighing approx. 4,000 kg for maximum rigidity and vibration damping. Powerful drive: 4 kW grinding wheel motor for rapid stock removal and short machining times. Ergonomic operation: Clearly arranged controls for rapid operator familiarization and intuitive handling. Technical Data Manufacturer: Reckord Model: M 1432 B (Model 1000) Type: Universal cylindrical grinding machine Centre height: 180 mm Max. grinding length: 1000 mm Max. grinding diameter: 315 mm Nodjyxgldepfx Ah Rekw Max. workpiece weight: 150 kg Workhead speeds: 40, 72, 128, 228 rpm Grinding wheel dimensions: 400 x 50 x 203 mm Grinding motor output: 4 kW Total power consumption: 7.8 kW Machine weight: approx. 4,000 kg Machine dimensions (L x W x H): 3240 x 1760 x 1680 mm Colour: Blue (as existing) Condition: Used, fully checked and operational Availability: Immediately ex stock Stockstadt Additional Information Scope of delivery: Cylindrical grinding machine Reckord M 1432 B including standard accessories as per the operating manual. Fully checked and operational. Technical documentation: Supplied in German. Optional services: Commissioning and training by experienced technicians, maintenance contract, as well as financing and leasing options on request. Inspection: The machine can be inspected by appointment in Stockstadt am Rhein.

Condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 113981, center height: 180 mm, grinding wheel diameter: 400 mm, grinding wheel width: 100 mm, overall weight: 5,000 kg, No minimum price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the item within the period from 08.04.2026 to 16.04.2026! TECHNICAL DETAILS Centre height: approx. 180 mm Centre distance: approx. 2,000 mm Grinding wheel diameter: approx. 400 mm Grinding wheel width: 100 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Rated current: 30 A Power connection: 7.5 kW Dimensions & weight Dimensions (L x W x H): 7,000 x 2,000 x 1,800 mm Nkodpfxeyladfs Ah Rsw Weight: 5,000 kg External reference: 20