Used Floating Dredgers for sale (234)

Condition: ready for operation (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 30715522, operating pressure: 10 bar, usable tank capacity: 270 l, Submitting a bid constitutes an obligation to collect the item on time by 27/02/2026! TECHNICAL DETAILS Operating pressure: 10 bar Effective delivery rate: 570 l/min Kjdpfjyfn Ewox Afpslt MACHINE DETAILS Connected load: 4 kW Voltage: 400 V Pressure vessel capacity: 270 l EQUIPMENT Duplex filter set WBF 63 MFO/CA (consisting of microfilter and activated carbon filter including automatic float drain) Oil-water separation system KON-C2 incl. inlet and outlet fittings 2 fully automatic vessel drain valves KN 1.230

Condition: good (used), 100.000L steel tank. Fire / drinking water underground or above-ground Dimensions 16.9 x 3.10m wall thickness: 5mm Klodpedbllzefx Afpst weight 8mm approx. 12t, weight 5mm approx. 9t. The tanks are sandblasted by us, equipped and then painted internally and externally with a corrosion-resistant epoxy resin coating. As standard, the tank has a suction pipe with a suction basket, a breathing chimney, a supply and drain connector, a ladder and a hatch. For an additional fee, we install a float valve and a manhole chimney We can weld additional accessories, e.g. a platform. We have tanks with and without beds. Steel beds for PLN 1800€ net. The tanks have a tightness certificate and a declaration of conformity. We offer delivery to the customer.

Condition: used, 113m³ above-ground steel tank on steel supports Kedew El Dlepfx Afpelt Diameter: 3.10m Length: 15m Cylinder wall thickness: 8mm Front wall thickness: 12mm The tank has a hole in the top (visible in the photo), which we will weld. The following optional additions to the tank are priced separately: Applying an state hygiene institution approved coating A DN50 float valve, or a DN100 float valve, including installation. The price depends on the float valve diameter. We have our own specialized trailer. Delivery costs depend on the destination.

Condition: excellent (used), Max material height 120 mm Max material width 700 mm 22 kW motor Kedpjxciypofx Afpjlt Two floating saws Hydraulic roller feed, steplessly adjustable

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Kjdoxvca Aepfx Afpjlt Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Ksdpfsv T Aqyjx Afpelt Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Year of construction: 2025, condition: new, 1. Electric Power trowel 1.1 kW/230V (220V), non-extendable handle, LED lamp, safety switch, „600” disc included, free wheels – 3899 PLN =EUR 917,40 2 – elestric power trowel ZDJ60E 1.1 kW, galvanized, disc with extended and removable handle included, rectangular guard – PLN 4012 =EUR 944 3 – electric power trowel ZDJ60E 1.1 kW with round cover, non-foldable handle, galvanized, disc included – PLN 4125 (additionally powder coated, PLN 136 more expensive) =EUR 970,59 4 – elestric power trowel ZDJ60E 1.1 kW with round sliding cover, removable handle – PLN 4125 =EUR 770,59 5 – electric power trowel ZDJ60E 1.5 kW, disc included (33 kg without disc) – PLN 4238 (additional, second LED lamp on the engine + PLN 113) =EUR 977,18 6 – electric power trowel ZDJ60E 1.5 kW, with round cover, disc included – PLN 4351 (additionally powder coated, PLN 136 more expensive) =EUR 1023,77 7 – 1.1 kW power trowel for prefabricated elements (27 kg/31 kg) with disc – PLN 4238 =EUR 997,18 8 – Concrete trowel for prefabricated elements with disc, weight 35 kg – PLN 4,159 =EUR 978.59 9 – NAC trowel, lightweight, two speeds + electronic speed change, small disc included – PLN 3786 =EUR 890,82 10 – Hikoki hand power trowel, 2 speeds (150-650 rpm) + electronic speed change, 1200 W, with small disc – PLN 1243 =EUR 292,47 11 – Hikoki hand power trowel, 2 speeds (150-650 rpm) + electronic speed change, 1600 W, with small disc – PLN 1413 =EUR 332,47 12 – NAC hand power trowel (USA), 2 speeds (180-400; 300-700 rpm) + electronic speed change, 1800 W, with small disc – PLN 1413 = EUR 332,47 13 – Single-speed hand power trowel with small disc – PLN 893 =EUR 210,12 14 – Single-speed hand power trowel with small disc, 0-970 rpm, 2800 W – PLN 938 =EUR 220,71 15 – Hand trowel for concrete and plaster. VIBRATORY. Vibrating plate 20X28 cm. Power 370 W/vibr. 2840 – 848 PLN =EUR 199,53 SMOOTHING DISCS – convex 38-42 cm, for HeideParks – PLN 226 =EUR 53.43 smoothing disc 47 cm/3 mm with rounded edge – PLN 260 =EUR 61,15 smoothing disc 47 cm/3 mm, stainless steel – PLN 294 =EUR 69,13 smoothing disc 60 cm made of stainless steel chrome (2.5 mm) – PLN 350 =EUR 82,42 60 cm smoothing disc made of 3 mm sheet metal (and without a rim) – PLN 283 =EUR 66,47 „600” disc with Velcro (for attaching sandpaper or polishing discs) – PLN 396 =EUR 93,06 Smoothing disc 40 – 50 cm, without rim or with rim – PLN 170 =EUR 39,88 65 cm/3 mm smoothing disc as above (flat, rounded edge) – PLN 328 =EUR 77,11 70/3 disc (with or without crown) hooks or screws) – PLN 316 =EUR 74,45 Smoothing disc 75 cm with hooks or screws – PLN 339 =EUR 79,76 80 cm floating disc with hooks or screws – PLN 373 =EUR 87,74 90 cm floating disc universal (right/left) – PLN 429 =EUR 101,04 as above but white (from chrome sheet) – PLN 746 =EUR 175,48 As above, but single-sided – PLN 215 =EUR 50,52 Kedpfx Aswt H Tdofpolt As above, but double-sided made of stainless steel (for single) – PLN 260 =EUR 61,15 As above, but double-sided for „900” self-propelled – PLN 283 =EUR 66,47 UNIVERSAL DISC for fastening segments – 400×5 made of stainless steel – PLN 542 =EUR 127,72 universal disc for fastening segments – 500×5 made of stainless steel – PLN 520 universal disc „600” made of carpet (for polishing) – PLN 25, thicker – PLN 40.00 That is why we provide a 5-year warranty for all our concrete trowels type ZDJ60E from 1.08.2017

Year of construction: 2025, condition: new, functionality: fully functional, For over 30 years, we have been manufacturing concrete power trowels, now available in 11 different models. We offer both 230V mains-powered and battery-operated versions (battery and charger included), with single-speed and dual-speed options. PLEASE SEND INQUIRIES BY EMAIL FOR FASTEST RESPONSE. Ksdpfxowvhu Us Afpelt Lightweight Power Trowel for Resin and Concrete, Equipped with American NAC Drive System. Dual-speed gearbox (2-stage) with stepless electronic speed control. First gear: 180–400 rpm. Second gear: 300–700 rpm. Power: 1800W. Compatible with 48 cm discs, 50 cm cross-member with floating blades and convex discs for concrete finishing in Heide Parks (we manufacture these discs), as well as bush hammering, polishing, and brush cleaning plates. Features: Wide handle adjustment range, LED work light, status indicators, safety switch, and small finishing disc included. Highly convenient for concrete finishing in hard-to-access areas, balconies, small rooms, and on vibrating tables. Net prices: • Lightweight battery-powered trowel (Vander), dual-speed + electronic speed regulation (Vander) – 3,350.00 PLN (EUR 798) • Lightweight single-speed battery-powered trowel, stepless speed regulation – 2,900.00 PLN (EUR 690) • Handheld, dual-speed battery-powered trowel (Vander) + electronic speed control – 1,450.00 PLN (EUR 345) • Handheld, single-speed battery-powered trowel, stepless speed control, complete set – 920.00 PLN (EUR 219) • NAC lightweight dual-speed power trowel + electronic speed control, small disc included – 3,350.00 PLN (EUR 798) • Handheld Hikoki trowel, 2 speeds (150–650 rpm) + electronic speed regulation, 1200W, small disc – 1,100 PLN (EUR 262) • Handheld Hikoki trowel, 2 speeds (150–650 rpm) + electronic speed regulation, 1600W, small disc – 1,250 PLN (EUR 298) • Handheld NAC (USA) trowel, 2 speeds (180–400; 300–700 rpm) + electronic speed regulation, 1800W, small disc – 1,250 PLN (EUR 298) • Single-speed handheld trowel, small disc – 790.00 PLN (EUR 188) • Single-speed handheld trowel with small disc, 0–970 rpm, 2800W – 830.00 PLN (EUR 198) • Handheld vibro-trowel for concrete and plaster. VIBRATING. 20x28 cm vibrating plate. Power: 370W/2840 vibrations – 750 PLN (EUR 179) TROWEL DISCS: • Convex 38–42 cm, for Heide Parks – 200 PLN (EUR 48) • 400/2.5 mm stainless steel disc – 230 PLN (EUR 55) • 400/3 mm disc with rounded edge – 220 PLN (EUR 53) • 47 cm/3 mm disc with rounded edge – 230.00 PLN (EUR 55) • 47 cm/3 mm stainless steel disc – 260 PLN (EUR 62) • 60 cm chrome-plated stainless steel disc (2.5 mm) – 310.00 PLN (EUR 74) • 60 cm/3 mm disc (no edge) – 250.00 PLN (EUR 60) • '600' disc with velcro (for attaching sandpaper or polishing pads) – 350.00 PLN (EUR 83) • 40–50 cm disc, no edge – 150.00 PLN (EUR 36) MOUNTING HEADS: • Mounting head Ø160 mm, stainless steel for diamond, brush, or bush hammer attachments. Fits angle grinders, lightweight, and handheld trowels – 350.00 PLN (EUR 83) • Mounting head Ø215 mm, stainless steel for 6 diamonds, brushes, or bush hammer attachments. Fits angle grinders, lightweight, and handheld trowels – 400.00 PLN (EUR 95) CROSS-BEAM: • 6-arm cross-beam, 3 mounting holes (50 cm) – 360.00 PLN (EUR 86) BLADES / PLASTIC PARTS: • 3-hole sheet or plastic blades, 0.5 mm – 26.00 PLN (EUR 6) • 3-hole sheet or plastic blades, 1.0 or 1.5 mm – 28.00 PLN (EUR 7) BUSH HAMMERING: • Complete stainless steel, double-row bush hammer head – 160 PLN (EUR 38) Contact us by email with any questions. We operate 24/7

Condition: used, Technical details: Kledpfx Afoft Tkqepot drum diameter: 600 mm weight of the machine ca.: 0,42 t Lanner batch wringer ME61-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 100 Liter/max. 200 kg -rotation speed max. 740 min-1 -power 5,5 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge. -Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use -Lifting beam: for lifting the insert drum. -Documentation on CD-ROM and in paper form Optional for extra charge: -Additional insert drum with pivot, perforation: ø 3 mm -Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray Please, contact us for getting more information and pictures on mail(at) or *

Condition: used, Technical details: drum diameter: 400 mm Kedpfx Afeft Tipepjlt revolutions per minute: 980 U/min total power requirement: 2,2 kW Lanner batch wringer ME41-2 for deoiling of metal chips -turnkey delivery and easiest handling -very long service life, operation free of vibrations -compact and easy to maintain, i.e. low maintenance costs and quick return of investment -standard execution consists of lid with pneumatic spring and electro-magnetic lid locking , unbalance detection switch and standstill control -including control cabinet laterally placed, i.e. not in swivel range of crane -drum volume 35 Liter/max. 50 kg -rotation speed max. 980 min-1 -power 2,2 kW Painting: RAL 5012 light blue (batch wringer, crane support) RAL 1003 signal yellow (traverse) RAL 7035 light grey (control cabinet) In each case silk gloss. Changes after consultation. Also included in the scope of delivery: -Crane support with swivel arm: mounted on the side of the centrifuge housing. For lifting the insert drum out of the centrifuge. -Electric chain hoist: with control pendant for suspension of the crossbeam, max. load 250 kg. Designed for indoor use -Lifting beam: for lifting the insert drum. -Documentation on CD-ROM and in paper form Optional for extra charge: -Additional insert drum with pivot, perforation: ø 3 mm -Tank with 100 L capacity for the spun-off liquid. With pump, electric control, float switch and drip tray Please, contact us for getting more information and pictures on mail(at) or *

Condition: good (used), Swedish multi-saw ARIVISLANDA DS74+1 - 160kW; Dismantled in March 2024 from a working line ; 4 hydraulic servo floating saws; Technical condition as in the photos. Kljdpfx Ajtrxgbefpjt

Condition: used, Used Heidolph model Laborota 20 S (nowdays Hei-VAP) large scale rotary evaporator: - Glassware set A2C: includes one ascending, one descending condenser and one expansion vessel, one 20-l evaporating flask, two 10-l receiving flasks. - Speed of rotation: 6 - 160 rpm. - Stainless steel heating bath: 0 - 100°C (water) or 0-180°C (oil), 400 mm diameter with float switch and automatic inlet valve. - Power: 4000 W. Kedsw R Uafspfx Afpelt - Timer: 0 - 99:59 hours. - Includes: Base cart, control panel, guard hood, rotation axis locking. - Dimensions: 970 mm x 620 mm x 1600 (height) mm. - Weight: 120 kg (withouth glassware set).

Condition: new, maximum load weight: 11,500 kg, overall weight: 18,000 kg, axle configuration: 2 axles, total width: 2,500 mm, total height: 3,330 mm, Year of construction: 2025, Equipment: ABS, ++ RENT ++ BUY ++ RENT ++ BUY ++ RENT ++ BUY ++ KROLL Suction-Pressure Tank Trailer ADR (internal no. #518) Type K 14.0/36 PEAH --- Tank code L4BH Suitable for the collection and transport of liquids and sludges. Total capacity approx. 14,000 liters (air volume) Sludge chamber (behind piston) approx. 12,000 liters (air volume) Tank material: S355J2G3 Shell wall thickness: 7 mm Flange pair "LONG LIFE" Closure bottom can be opened by 2 hydraulic cylinders Closure bottom locking with tension claws, hammer head bolts and galvanized linkage Pneumatic lid locking Tank level indicator via internal float and external display scale Discharge apron made of aluminum Discharge by free flow and via piston Piping and fittings in DN100 Suction line DN100 Kljdpfsxc S Aaex Afpjt Operator station rear right Chassis 9t BPW axles, air suspension with lift and lower valve for each axle Ball-bearing slewing ring and certified long drawbar Tires 4x 385/65R 22.5 Michelin Plastic mudguards Rear impact protection Side underrun protection 2 wheel chocks Dual-line air brake system with WABCO EBS, ABS, and TSS Hose lockers left and right on superstructure Toolbox LED work lights LED beacon lights 4x LED area lights Advertising panels left and right, 3000 x 650 mm For further details and/or pictures, please contact us directly. You will find a wide selection of other vehicles for SALE or RENT at: Subject to change, prior sale, and errors. The buyer is obliged to independently verify the condition and equipment of the goods. Sale is exclusively in accordance with our terms and conditions and excludes any warranty.

Condition: used, Used cutter suction excavator Z-243 Operating hours: approx. 600 Application: self-maneuvering cutter suction dredger for cleaning water bodies, sludge removal from water bodies Pumping capacity: up to approx. 350 m3/h Suction dredger depth: approx. 5 m Total length with extension: 13,20 m Overall width: 2.90 m Overall height: 2.70 m Depth: 0.75 / 1.18 m Draught: ready for operation 0.62 m Suction pipe diameter: 150 mm Ksdpfx Afsrq I I Nspslt Excavator depth at an angle: 45° for extension 5.0 m Fuel capacity: 300 liters Cutting speed (variable speed): 0-90 rpm and vice versa Cutting power: 10 kW / 13 hp Deutz main engine: 90 kW / 120 hp Transportable on the road: Yes Largest part for transport: (main pontoon with extension) 11.60 x 2.50 x 2.50 m, approx. 10 tons Cabin: One-man operation in comfortable, low-noise cabin Transport: Can be dismantled and transported by road, overseas transport in containers Pontoons: The hull consists of several pontoons connected by a proven coupling system Coating: Marine coating system and cathodic protection for optimum protection Consumption: Low fuel consumption and low total cost of ownership System: Closed throat cooling system

Condition: new, functionality: fully functional, Year of construction: 2026, operating hours: 1 h, ! Available from April ! The KINGWAY ST 20 ILL electric forklift is a modern, eco-friendly, and high-performance machine designed for intensive use in warehouses, logistics centers, manufacturing facilities, and any application where precision, reliability, and low operating costs are essential. Technical Data Model: ST 20 ILL Rated Capacity: 2,000 kg Overall Length (with/without forks): 3,520 / 2,300 mm Overall Width: 1,200 mm Overall Height: 2,200 mm Vehicle Weight: 2,800 kg Lifting Height: 3 m Construction Material: Pressed, integrated steel plate Manufacturing Technology: Electrophoretic, corrosion-resistant coating Drive Motor: 6 kW, brushless AC motor Lift Motor: 6.5 kW, brushless AC motor Voltage: 60 V Kledpfx Afox Uppqspjt Control System: High-performance controller with anti-slip function for gradients Battery: Super Power Dry Cell Charging Time: 4–6 hours Continuous Operation Time: 6–8 hours Drive Axle: Fully floating, heavy-duty low-speed drive axle Steering Axle: Special rear axle for heavy-duty forklifts Tire Type: Solid rubber, puncture- and wear-resistant Front Tire Size: 650–10 Rear Tire Size: 500–8 Brake System: Parking brake, oil brake Lift Cylinder: Reinforced double cylinder with seal Mast Material: Reinforced C-steel, 150 mm Steering: Hydraulic power steering Turning Circle: On-the-spot 90° rotation Gradeability: 15 % Operating Noise Level: 60 dB Key Advantages of the KINGWAY ST 20 ILL: - Lift capacity up to 2 tons - Quiet and eco-friendly operation – zero emissions - Long operating time per charge: up to 8 hours - Brushless AC motors for high performance and low maintenance - Robust, corrosion-resistant construction - Lower operating costs compared to internal combustion forklifts PRICE: €8,500 net €10,115 gross

Year of construction: 1990, condition: refurbished (used), Our Best Sellers! Extremely dynamic short circuit protection, therefore excellently suited for rugged industrial use with high Schalthaeufigkeiten, electrical loads and harmonic components. Stable boiler. Reduced losses (Po / Pk between BA 'and A-C'). Available with outer-cone Elastimold Steckdurchfuehrungen, of course, also with HV / LV-sided porcelain execution. Klodpfxs A Nbvo Afpot Transformer is always equipped with a dial thermometer with two contacts and pointer, with optional transformer DGPT2 full protection. Ausdehnerversion with 2-float Buchholz relay possible. Delivery to a series of 35 QUANTITY devices. 12 months warranty.

Condition: like new (used), HEMA monoblock filler with ZALKIN capper for PET bottles. This type of machine is suitable for dosing the following products: mustard, baby food, sauces, pastes, jams, etc., whether containing particulates or not. These machines are equipped with filling devices specifically designed for dosing viscous products. The HEMA filler operates in two key phases: suction and filling. These phases alternate continuously to ensure fast and accurate filling. The ZALKIN capping machine is engineered for placing and sealing aluminum screw caps—deformable or non-deformable (for carbonated or non-carbonated beverages)—as well as screwing aluminum or plastic caps, or applying snap-on or floating closures. The system is compatible with bottles made of glass, plastic, or metal, in various shapes. Klsdpfxsynkdzs Afpet Output varies according to product type, container format, and fill volume, with a maximum output of up to 6,000 bottles per hour (120 bottles/min). Includes: - Cap feeder - Infeed conveyors - Discharge belts - Control panel - Automatic CIP cleaning system - Cylindrical filling valves - Heated-jacket pistons - Adjustable volume control for container size and filling capacity - Steam sweeping in the capper with vacuum closure - Schneider automatic touchscreen interface - Elevating bottle carrier

Condition: used, overall weight: 6,545 kg, color: orange, operation weight: 6,545 kg, maximum load weight: 3 kg, empty load weight: 3,045 kg, tire size: 225/75R17.5, Year of construction: 2012, total length: 442 mm, tire condition: 60 %, front tire size: 225/75R17.5 | 60%, rear tire size: 225/75R17.5 | 60%, maximum speed: 50 km/h, working width: 165 mm, Equipment: air conditioning, lighting, Tyres (front): 225/75R17.5, Tyres (rear): 225/75R17.5, First registration: 2012, Tow hitch - automatic, Tow hitch - manual._____We are offering for sale a used Ausa compact vehicle transporter M 350 H 4x4 Full Grip, equipped with a 2.0 TDI VW CommonRail engine, Euro 5 with EEV, 74 kW / 102 HP - Long three-way tipper - with quick-change frame - equipment carrier plate - air conditioning - pin & ball coupling - ABS - AUSA FullGrip system. Front attachment plate: 1,800 kg lifting capacity, joystick control for lift-lower, right-left, additional switch for float position and hydraulic circuit. Brakes: front hydraulic servo brake with front disc brakes; rear drum brake with ABS and EBD. Tyres: 225/75R17.5. Unladen weight: 3,045 kg, Payload: approx. 3,500 kg, Perm. GVW: approx. 6,545 kg, Towing capacity braked: 3,500 kg, Towing capacity unbraked: 750 kg. Length: 4,427 mm, Width: 1,750 mm, Outer edge of fender Height: 2,230 mm without beacon, 2,390 mm with beacon. Wheelbase: 2,160 mm, Turning circle (outer): 7,998 mm. 4x4 drive. Tipper bed internal dimensions (LxWxH): 2,540 x 1,650 x 400 mm. Comparable to Bonetti, Multicar, Pfau. You can find our complete range of used vehicles online. Further details available upon request. Subject to prior sale! Location: 94491 Hengersberg. Klsdpfx Afoyq Au Rjpet

Condition: used, mileage: 3,42,789 km, power: 120 kW (163.15 HP), first registration: 03/2013, fuel type: diesel, empty load weight: 4,095 kg, maximum load weight: 645 kg, overall weight: 5,000 kg, axle configuration: 4x2, wheelbase: 3,650 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 3, loading space length: 3,650 mm, loading space width: 1,900 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, onboard computer, power assisted steering, * German vehicle * Stollenwerk stretcher available for an extra charge * First owner * Rear axle air-suspended * Ambulance and emergency vehicle box body * Body by Fahrtec Systeme * Adjustable floating stretcher platform * Wheelchair mount * Central locking for patient compartment * Air conditioning KONVEKTA * Stretcher wheelchair * 1 attendant seat * Refrigerated compartment * Warming cabinet Klsdpfx Ajw Ip D Tefpot * Sink * Medical cabinets * Oxygen and suction system pre-installed * 12V + 230V sockets * Roof hatch * External storage compartments * Rear wing doors with access step * Side door with sliding window and step * All-round work lighting * Partition wall with sliding window * Intercom system * Driver's cab with 2 seats * Air conditioning * Automatic transmission * Electric windows * Electrically heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Twin-tired rear axle * Body dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * Gross vehicle weight: 5,000 kg * Unladen weight: 4,355 kg * German commercial law applies to sales to businesses and for export (EU and non-EU). If a new TÜV inspection is requested, we will be happy to offer you a quote from one of our partner workshops. Our offer is in general WITHOUT new TÜV inspection, without new DGUV, without new SP, without new UVV. You can find further trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend viewing and inspecting the goods to avoid any misconceptions regarding condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We do not assume liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to prior sale and changes. Errors excepted.

Condition: used, mileage: 3,99,970 km, power: 120 kW (163.15 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 3,645 kg, maximum load weight: 955 kg, overall weight: 4,600 kg, axle configuration: 4x2, wheelbase: 3,650 mm, brakes: other, color: yellow, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel, number of seats: 5, loading space length: 3,650 mm, loading space width: 2,000 mm, loading space height: 1,970 mm, Equipment: ABS, air conditioning, cabin, central locking, fog lights, parking heater, power assisted steering, sliding door, soot filter, * German vehicle * Stollenwerk stretcher available at an additional cost * Intensive care ambulance box body * Bodywork by WAS Ambulance * Adjustable floating stretcher table Stryker Model 6381 Kledpfsvhpqvsx Afpot * 3 attendant seats * Air conditioning in passenger compartment * Electric heater * Pull-out cabinet * Warming cabinet * Medical cabinets * Oxygen and suction system pre-installed * 220 Volt power sockets * Ampoule compartment * External storage compartment * Right-hand sliding door with electric step * Rear wing doors with step * Driver’s cab with 2 seats * Air conditioning * Auxiliary heater * Driver and passenger airbags * Height-adjustable driver and passenger seats with armrest * Electric windows * Electrically adjustable and heated mirrors * Automatic transmission * Partition wall with sliding window * Daytime running lights * Radio CD * Central locking with remote control * ABS and ASR * Twin rear wheels * Signal system * Work lights * Body dimensions: L=3,650 x W=2,000 x H=1,970 mm * Wheelbase: 3,650 mm * GVW: 4,600 kg * Payload: 955 kg * For sales to traders and for export (both EU and non-EU), German commercial law applies. If a new TÜV inspection is required, we will be happy to provide a quote from our partner workshops. Our offer is generally WITHOUT a new TÜV inspection, without new DGUV certification, without new SP, and without new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Notice: We strongly recommend and offer a viewing and inspection of the goods to avoid any misconceptions regarding their condition and suitability. Viewings and inspections are possible at any time by appointment and are expressly encouraged. All information is provided without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and specification of the goods/vehicles. Subject to changes, prior sale, and errors.

Condition: used, mileage: 2,10,823 km, power: 110 kW (149.56 HP), first registration: 03/2011, fuel type: diesel, empty load weight: 4,400 kg, maximum load weight: 450 kg, overall weight: 4,850 kg, axle configuration: 4x2, wheelbase: 3,650 mm, brakes: retarder, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro4, suspension: steel-air, number of seats: 3, loading space length: 3,650 mm, loading space width: 1,900 mm, loading space height: 1,980 mm, Equipment: ABS, air conditioning, airbag, cabin, central locking, onboard computer, power assisted steering, * German vehicle * Stretcher from Stollenwerk available at extra cost * 1st owner * Stollenwerk stretcher for an extra charge * Telma retarder * Rear axle air suspension * Ambulance and emergency vehicle box body * Body by Fahrtec Systeme * Adjustable floating stretcher table * Wheelchair mounting facility * Central locking system for patient compartment * KONVEKTA air conditioning unit * 1 attendant seat * Refrigerated compartment * Warming cabinet Kledpfxovhpprs Afpjt * Sink * Medical cabinets * Prepared for oxygen system and suction unit * 12V + 230V sockets * Roof hatch * External storage compartments * Rear wing doors with step * Side door with sliding window and step * Signal system dismantled, stored inside the vehicle * All-around work lights * Partition wall with sliding window * Intercom system * Driver’s cab with 2 seats * Air conditioning * Automatic transmission * Electric window lifters * Electrically adjustable, heated mirrors * Searchlight * Daytime running lights * Driver and passenger airbags * ABS and ASR * Rear axle with twin tyres * Body dimensions: L=3,650 x W=1,900 x H=1,980 mm * Wheelbase: 3,650 mm * Gross vehicle weight: 4,850 kg * Unladen weight: 4,400 kg * For commercial sales and export (non-EU and EU), German commercial law applies. If a new TÜV inspection is required, we will gladly provide a quote from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, WITHOUT new DGUV, WITHOUT new SP, WITHOUT new UVV. You can find more trucks on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to avoid misunderstandings regarding their condition and suitability. Inspection and examination are possible at any time by appointment and are expressly desired. All information provided without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to independently check the condition and equipment of the goods/vehicles. Subject to prior sale, changes, and errors.

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 1,500 kg, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, pallet forks, (We also offer the same model with a cab at a special price) The WARRANTY (3 YEARS!) applies exclusively to machines purchased DIRECTLY from us, not from other dealers. KINGWAY DEUTSCHLAND is the only authorized stationary specialist dealer for the Kingway brand on the German market, with its own service department. The FARMER 906 model is the ideal equipment for agriculture, construction, electrical, plumbing, repair, and similar industries. We also guarantee equipment servicing after the warranty period expires. Wheel loaders are supplied according to standards and under supervision. TECHNICAL SPECIFICATIONS: - Manufacturer: KINGWAY DEUTSCHLAND e.K. - Model: 906 - Open canopy, working lights, joystick control, rain guard roof. ENGINE DETAILS: - Engine: PERKINS 403J-11 – Diesel - Cylinders: 3 - Displacement: 1131cm³ - Emission class: Euro 5 - Max. engine power: 18.5 kW / 25 HP at 2800 rpm - Max. torque: 66.9 Nm at 2100 rpm - Cooling system: Water-cooled - Noise level: 92 dB - Power supply: 12V - Battery: 12V / 60 Ah DRIVE: Drive unit: Hydrostatic with 2 drive motors (1 speed) – PWG ITALY Travel speed (1st gear): 0-18 km/h CAPACITIES AND PRESSURES: - Fuel tank capacity: 32 liters - Hydraulic oil tank capacity: 40 liters Kodpfx Afevz Tguopjlt - Max. hydraulic oil flow: 36 L/min - Max. hydraulic pressure: 180 bar - Hydraulic oil flow: 33 L/min WEIGHTS: - Operating weight: 1,500 kg - Max. tipping load (straight, on pallet forks): 900 kg - Max. lift capacity (at mounting): 600 kg DIMENSIONS: - Steering angle: 45° - Turning radius (inner/outer): 1,556 mm / 2,500 mm - Lifting height (lower edge of standard bucket): 1,850 mm - Dumping height (with standard bucket): 1,830 mm - Dumping angle: 45° - Standard bucket: 0.4 m³ loading volume - Overall length: 3,660 mm (with standard bucket) - Overall width: 1,150 mm (standard version) - Overall height: 2,280 mm (standard tires) - Track width: 880 mm - Wheelbase: 1,370 mm TIRES: - 26x12.00-12 agricultural tread FEATURES: - Very high-quality and robust build - Euro mount (STANDARD) - Lockable tank and engine hood - Easy handling - Compact and versatile - Lighting system - Hydraulic quick coupler system - Third hydraulic circuit for attachments - CE certified according to the latest standards and guidelines - Sale WITHOUT VAT possible (only with VAT ID number) - FINANCING available SCOPE OF DELIVERY: - FREE delivery within 200 km - One wheel loader / yard loader Farmer 906 - Includes bucket 1.35cm + forks - Hydraulic quick coupler - Joystick control - 4x4 all-wheel drive - EURO MOUNT - ROAD APPROVAL - Float function - Operating permit for Germany - Tow hitch For each of our loaders, you can also order: - Tow hitch, - Additional counterweights, - Any possible accessories such as dozer blade, grapple, snow plow, high-capacity buckets, sweeper, grab bucket. WARRANTY: - Each machine comes with a 12-month warranty, which can be extended by another year. - After the warranty period expires, our customers are guaranteed access to all spare parts. SERVICE: - We have our own mobile service that serves all our customers in Germany and abroad. PRICE: 16,500 € net 19,635 € gross

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, Year of construction: 2024, operating hours: 1 h, Equipment: 4 in one shovel, cabin, In our offer you will also find: - FARMER 810 – Perkins - diesel engine, 3 cylinders, price: € 19,500 net. - FARMER 810 Turbo – KUBOTA - diesel engine, 4 cylinders, cardan shaft, price: € 21,000 net. The FARMER 810 model is the ideal equipment for agriculture, construction, electrical, plumbing, repair and similar industries. We also guarantee equipment service after the warranty period. Wheel loaders are manufactured on the basis and under the supervision of European technicians. The equipment is made of a strong structure, it can work in any conditions. TECHNICAL PARAMETERS: - Manufacturer: KINGWAY GERMANY - Model: 810 - Full cabin with heating, ventilation, lighting, rear view camera, radio, ENGINE DATA: - Engine: XINCHAI - Diesel - Cylinders: 3 - Emissions class Euro 5 - Max. rated engine power: 18.2 kW / 25 HP at 2800 rpm - Max. torque in Nm: 92.6 at 1700 rpm - Cooling system: Water-cooled - Noise level: 92 Db - Power supply: 12V - Battery: 12V / 60 Ah DRIVE Drive unit: Hydrostat (PWG ITALY) Drive speed (gear level 1): 0-20 km/h FILLING VOLUMES AND PRESSURES: Klsdpfovz Ua Nox Afpot - Fuel tank capacity 40 liters - Hydraulic oil tank capacity: 50 liters - Max. Hydraulic oil capacity: 42 L/min - Max. hydraulic oil pressure: 180 bar WEIGHT INFORMATION: - Operating weight: 2,300 kg - Max. tipping load: 1,600 kg - Max. lifting load (on the attachment): 1,000 kg DIMENSIONS: - Steering angle: 42° - Turning radius inside/outside: 1,869 mm / 3,172 mm - Lifting height (lower edge of standard bucket): 2,720 mm - Dumping height (with standard bucket): 1,950 mm - Dumping angle: 45 ° - Standard bucket: 0.5 m³ loading volume - Total length: 4,410 mm - Total width: 1,490 mm - Total height: 2,290 mm - Track width: 1,190 mm - Wheelbase: 1,690 mm TIRES - Standard: 31x15.5-15 field profile SPECIAL FEATURES: - very high-quality and robust workmanship - Euro mount (STANDARD) - lockable cabin, tank and engine hood - heating / ventilation - rear view camera - spacious comfort cabin - easy handling - very maneuverable!!! - compact and versatile - lighting system / street lighting - hydraulic quick-change system - third hydraulic oil circuit for attachments - CE tested according to the latest standards and guidelines - sale WITHOUT TAX possible (only with VAT number) - FINANCING possible SCOPE OF DELIVERY: - FREE delivery GERMANY-WIDE - A wheel loader / farm loader Farmer 810 - incl. shovel + fork (4in1 shovel on request) - hydraulic quick coupler - joystick control - 4x4 - all-wheel drive - EURO ATTACHMENT - ROAD APPROVAL - floating position - operating license for Germany For each of our loaders you can also order: - trailer coupling, - additional weights, - all possible accessories such as pusher, crocodile, snow plow, volume shovels, sweeper, grab shovel. PRICE: Net price €18,067 Gross price €21,500 WARRANTY: - Each machine has a 12-month warranty that can be extended for a further TWO years. - After the warranty period has expired, we ensure our customers have access to all spare parts. SERVICE: - We have our own mobile service that reaches all our customers in Germany and outside Germany.

Year of construction: 2004, condition: ready for operation (used), For rent I offer different bridges / crossings / landings Klodpfx Ajiab Aiofpjt at Lengths between 8 and 15 meters Applicable as construction bridges, pedestrian bridges, in hydraulic engineering etc. Associated floating pontoons are also available if required.

Condition: used, mileage: 999 km, first registration: 01/2000, V-Plfug control: - Europe Service - Control for V-plow Klodpfxsqxucko Afpjt - Floating position You can find our entire vehicle fleet at auto-ungar Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!