Used Suction Dredger for sale (2,419)

Condition: used, functionality: fully functional, mileage: 21,000 km, power: 375.1 kW (509.99 HP), gearing type: automatic, fuel type: diesel, color: green, axle configuration: 8x4, first registration: 02/2023, Year of construction: 2023, operating hours: 788 h, Equipment: ABS, traction control, Inspected used vehicle SB 1325 – Available from December 15, 2026 Credpfx As Ahyp Tjizoi Standard superstructure DINO Vario 12 m³ MAN TGS 8x4 MTS suction excavator DINO Vario 12 m³ Standard equipment: MTS suction superstructure MTS double fan (patented) MTS material separation system (patented) Automatic filter cleaning Compressed air compressor 4.5 m³/min, 8 bar POWERARM articulated boom with 7 m suction hose 3 stabilizer supports PLC control with remote diagnostics Radio remote control Set of demolition and air release tools Storage option Optional extras: Container and lid with stainless steel lining MEGAARM articulated boom Rotating suction pipe system IKE/PERFOR Suction & drive & steer HYDROSTAT Full fairing DESIGN High-pressure water system 30 l/min, 160 bar, 500 l tank Full fairing DESIGN 3 vibrators on the suction hose Industrial equipment: Abitron instead of Groß Funk Industrial package I: grounding system Industrial package II: gas sensor Industrial package III: Ex Zone II radio Industrial package V: conductive suction hose Environmental equipment: Noise reduction package: sound insulation for the container Special accessory module: Storage boxes, stainless steel Access ladder, machine house, 2 x Ladder under hose rack Hose reel, rear for MTS spade Special accessory - lighting: Lighting package I: 3 LED lights on the vehicle frame Lighting package II: 2 LED lights on the central joint of the articulated boom Lighting package III: LED light strips in the tool box Lighting package V: LED lights next to the articulated boom shaft Lighting package VIII: Light bar on the lid (rear) Special accessory - safety: 4 flashing beacons Other special equipment: Trailer coupling, ball hitch 3.5 t with support Water tap on the right (passenger side) The general terms and conditions of MTS GmbH apply, which can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen-gebrauchtfahrzeu ge Subject to errors and prior sale. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: used, functionality: fully functional, mileage: 22,000 km, power: 405 kW (550.65 HP), gearing type: automatic, fuel type: diesel, color: black, axle configuration: 6x2, first registration: 07/2024, emission class: euro6, Year of construction: 2024, operating hours: 680 h, Equipment: ABS, air conditioning, parking heater, traction control, Available from April 1, 2027. Used suction dredger directly from the manufacturer – for sale or rent. Are you looking for a used suction dredger that is readily available, technically reliable, and economically attractive? At MTS, you can get used suction dredgers directly from the manufacturer – professionally inspected, technically and visually refurbished, and ready for its next assignment. Currently Available: MTS DINO VARIO 8 m³ - SB 1612 on Volvo FH 6 x 2 Suction unit: Tested quality directly from the manufacturer 6 months warranty 1 year/500 operating hours maintenance-free Operating hours of fan: 652h Operating hours of compressor: 670h Standard equipment MTS suction unit MTS double fan MTS material separation system (patented) Automatic filter cleaning, compressed air compressor 4.5m³/min, 8 bar Articulated boom POWERARM with 7m suction hose 3 stabilization supports PLC control with optional remote diagnostics Radio remote control (brand: Gross Funk) Storage option Optional module options Container & lid, stainless steel lining Stainless steel design for toolboxes Articulated boom EVO-POWER ARM Rotary suction pipe system IKE/PERFOR Suction & drive & steering HYDROSTAT Electric steering Volvo Full fairing DESIGN High-tip HIGH-TIP with 4 supports (2+2) High-pressure water system 30 l/min Vibrators on the suction hose Industrial equipment Industrial package II: Gas sensor Infinitely variable speed control for fan Filtration unit for oil circuit Environmental equipment Hydraulic oil, biodegradable Noise reduction package: Sound insulation of the container exterior Accessories - Module Container with 2 pneumatic vibrators Cedpfx Aijzvw U Ujzori Access ladder, machine house (2x) Ladder under the hose rack Accessories - Lighting Light package II: 2 LED lights on the central joint of the articulated boom Light package III: LED light strips in the toolbox Light package V: LED lights next to the articulated boom shaft Light package VII: Fire brigade lighting 2x Light package VIII: Light bar at the rear Accessories - Safety 4 warning lights Anti-slip coating Accessories - Filter system Filter cleaning with pneumatic vibrator Accessories - Tools Vogt pneumatic shovel Atlas Copco 20 KG hammer Air lance The general terms and conditions for used vehicles of MTS GmbH apply and can be found at: saugbagger.com/allgemeine-geschaeftsbedingungen Errors and prior sale excepted. The vehicle description serves only as preliminary information. We reserve the right to change prices, equipment, and other details at any time. This information is not binding and does not create any contractual obligations.

Condition: used, Used cutter suction excavator Z-243 Operating hours: approx. 600 Application: self-maneuvering cutter suction dredger for cleaning water bodies, sludge removal from water bodies Crodpfxorq I I Nj Aizsi Pumping capacity: up to approx. 350 m3/h Suction dredger depth: approx. 5 m Total length with extension: 13,20 m Overall width: 2.90 m Overall height: 2.70 m Depth: 0.75 / 1.18 m Draught: ready for operation 0.62 m Suction pipe diameter: 150 mm Excavator depth at an angle: 45° for extension 5.0 m Fuel capacity: 300 liters Cutting speed (variable speed): 0-90 rpm and vice versa Cutting power: 10 kW / 13 hp Deutz main engine: 90 kW / 120 hp Transportable on the road: Yes Largest part for transport: (main pontoon with extension) 11.60 x 2.50 x 2.50 m, approx. 10 tons Cabin: One-man operation in comfortable, low-noise cabin Transport: Can be dismantled and transported by road, overseas transport in containers Pontoons: The hull consists of several pontoons connected by a proven coupling system Coating: Marine coating system and cathodic protection for optimum protection Consumption: Low fuel consumption and low total cost of ownership System: Closed throat cooling system

Condition: used, Year of construction: 2006, 2006 | Mercedes-Benz Actros 3241 K 8x4 2004 RSP ESE 32 / 7-2 Double Turbine | Used Suction Excavator | 204214 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 57000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 32 inspection points 30 approved ✅ 0 imperfect ℹ️ 2 issues ⚠️ Cjdpex Rpdmefx Aizeri 📌 Inspector's Comment: Machine was working at the time of inspection, except as noted. Could not fully test vacuum hydraulic arm, (because of a fault in one of the cylinders). There is some oil residue around the PTO pump. Suction hose diameter 250 mm, max volume flow 3'000 m3/h, max vacuum pressure 47'000 Pa, side tipper discharge, filter system (40 cartridge filter with automatic cleaning, 6000mm range), remote control: yes, main tank size 10 m³, Air compressor system: max 4.5 m3/min, 7 bar 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "31334 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, 2007 | DAF CF 85.480 RSP | Used Suction Excavator | 188940 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! Cedpsykuvmjfx Aizsri 💰 Buy Now for EUR 39900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 40 inspection points 30 approved ✅ 5 imperfect ℹ️ 5 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the suction excavator, but not everything is functioning correctly. The tractor part is working properly. The radio is missing from the cabin. Error message on the dashboard. Alert, exhaust system pipe. Two remote controls provided for the vacuum. Presence of oxidation on the external part of the bucket. The batteries were started with a booster. It is not possible to operate the hydraulic part, meaning deployment of the stabilizers, opening of the bucket, and tipping the bucket is impossible to operate the hydraulic arm. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40181 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: used, Year of construction: 2007, 2007 | DAF CF 84.460 RSP | Used Suction Excavator | 232536 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 39900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 41 inspection points 31 approved ✅ 10 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: Good overall condition of the suction excavator. Quite significant tire wear. Presence of oxidation on the bucket and turbine. All functionalities are working. Ability to cut off the air valve on the rear left of the vehicle. Damage to the rack dampening the access door on the right side. Absence of the GNR tank cap. Presence of two remote controls. Absence of the AD Blue tank cap. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40180 Equippo" is commonly used when looking up more details online. Csdpfsyi Enwox Aizsri 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2016, Welding fume extraction system F-84, manufactured in 2016, for sale! Cjdpfs Ahq E Ijx Aizeri A welding fume extraction system, type F-84, manufactured in 2016, is for sale. The system is sold with a comprehensive range of accessories. Included in the scope of delivery: * Various exhaust pipes * Several extraction arms * Other accessories The system is ideally suited for use in workshops and industrial facilities. If you are interested or have any questions, please do not hesitate to contact us!

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, type of input current: three-phase, volume flow: 9,900 m³/h, power: 11 kW (14.96 HP), Füchtenkötter dust extraction system for sale. Comes with various accessories, including piping and automatic control for self-cleaning. Cedpfxezn Uk Do Aizori The system has 2 suction inlets and one outlet for the filtered air. I acquired 2 systems from an insolvency auction. One system will be used for my own purposes. The other system is for sale. The condition of the systems is excellent. Dimensions: approximately 4 x 2.5 x 3 m.

Condition: used, Year of construction: 2023, TEKA welding fume extraction system Model VACCUBE 30 Crodpfx Ais Ah Drvozoi used Year of manufacture: 2023 Power: 3.0 kW Current consumption: 7.2 A Connection voltage: 400 V / 50 Hz Max. capacity: 320 m³/h Max. pressure: 27000 PA Filter area: 8.16 m² PTFE Sound level: 68 d(B)A Weight: 125 kg

Condition: good (used), Year of construction: 2020, functionality: fully functional, Equipment: type plate available, We are offering this excellent TEKA Caremaster welding fume extraction system for sale. Cedpfx Ao Agcwweizori Manufacturer: TEKA Model: Caremaster Machine type: Welding fume extraction system Without filters!!! Two units available. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: new,

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables Crjdpfxo Aazd Ej Aizsi system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: *Fan with a power of 7.5 Kw. *Capacity 7500 m3/h *Maximum vacuum 3000 Pa *Filtration area 100 m2 *Noise silencer Stock number: 1178

Condition: like new (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: L-275.0335 / L-288.0125, total length: 6,000 mm, total height: 3,800 mm, overall weight: 350 kg, Bystronic Swivel Crane with Suction Device Bystronic Swivel Crane - Model: SSK2 - Year: 2015 - Height: 3800 mm - Arm Length: 6000 mm - Load Capacity: 500 kg Bystronic Suction Device - Model: EK 250 - Year: 2015 - Load Capacity: 250 kg - Weight: 80 kg - Pneumatically operated - 90° Tilting Codpfx Aijz Dphgszori Disassembly and installation can be performed by our service team upon request. Immediately available.

Condition: used, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 324 m², suction capacity: 18,000 m³/h, negative pressure: 2,250 Pa, input frequency: 50 Hz, Dust extraction, filtration, welding fume extraction, self-cleaning cartridge filter, pneumatic, vacuum-based TEKA AIRTECH P18. The main areas of application for these systems are industrial plants/welding shops where it is not possible to implement point extraction or where point extraction is not sufficient to maintain clean air in the workshop. Laterally mounted ducts with a pollution collection point draw in contaminated air and lead it to the filtration section. Here, pollutants in the form of fine particles accumulate on the surface of the cartridge filter. A compressed air pulse is applied to clean the cartridge filters automatically at the required intervals. After the compressed air pulse, the particles collected on the filter surface detach and fall into the dust collection tank. The cleaned air returns to the work area through individually adjustable long-range nozzles. At the same time, the outlet of the cleaned air directs the contaminated air in the workshop towards the extraction ducts. Csdpfxo Ahm Iij Aizori The filter is cleaned by a microprocessor controller with compressed air pulses during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The AIRTECH series of devices is certified by IFA according to EN ISO 15012-1 or DIN EN ISO 21904-1/-2 and approved for welding fume class W3 as a stationary, local welding fume extraction unit. Parameters: Capacity - 18,000 m3/h Motor power - 11 kW Vacuum - 2250 Pa Filtration area - 324 m2 (9 filter cartridges of 36 m2 each) Fan in a sound-absorbing housing Control cabinet with electrical documentation Noise level - 72 dB Dimensions: Height - 5.00 m Base width - 1.44 m x 1.44 m Width with outlet ducts - 8.5 m Total weight approximately 2400 kg

Condition: used, Year of construction: 2008, functionality: fully functional, input voltage: 400 V, volume flow: 3,600 m³/h, power: 5.5 kW (7.48 HP), Equipment: type plate available, Industrial filtration and dust collection system designed by Sideros Engineering for treating fumes and dust generated during thermal cutting, welding, or grinding processes. Codpfez Hk N Djx Aizsri Collection and filtration of fumes from oxy-fuel cutting, plasma cutting, and laser cutting, as well as dust from welding and sanding.

Condition: good (used), Year of construction: 2016, functionality: fully functional, Includes 1 arm. Codpfsz Dv Dnex Aizeri

Condition: new, Year of construction: 2024, functionality: fully functional, input voltage: 400 V, power: 2.2 kW (2.99 HP), input current: 5 A, Equipment: type plate available, TEKA welding fume extraction system 3 units with control units, pipes, and mounting hardware The system is new, has never been used, and is partially still in its original packaging! Csdpfxjz Sp Aho Aizeri

Condition: used, Year of construction: 2006, machine/vehicle number: OTW, Schmalz vacuum lifter with a load capacity of 125 kg Dimensions: 180x80 cm, suction pads are fully adjustable. These are porous and should be replaced. Csdpfxsy Hf Ito Aizsri 4 suction pads, each with a diameter of 140 mm Connection: 400V 16A Good condition, see pictures Item location: 75053 Gondelsheim Shipment via freight carrier or collection by appointment only

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, Vacuum lifter from Schmalz for handling flat materials with a suction cup. Credoz Nplkspfx Aizei Maximum lifting capacity: 125 kg. Schmalz model: MOD-VM-BASIC-125/250, BB-VM-BASIC-600-HI Adjustable suction cup, maximum dimensions: 1600 x 750 mm Suction cup diameter: 220 mm Vacuum pump: EVE-TR 4 AC 3 Operating lever Mounted on a stand with 4 wheels.

Condition: used, Year of construction: 2021, Motor power: 3kW, protection rating: IP54, max. air flow rate: 2800m³/h, number of filter elements: 2, filter area: 24m², dimensions: 1910mmx1040mmx2200mm, weight: 350kg. The machine was inspected by ESTA in 2021. Inspection by appointment possible. Crsdpfx As Aba R Teizsi

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, overall weight: 1,200 kg, input voltage: 400 V, total width: 1,050 mm, total length: 1,920 mm, total height: 2,160 mm, filter area: 23.75 m², suction capacity: 1,500 m³/h, Equipment: type plate available, HERDING brand dust extraction and welding fume extraction system. Self-cleaning filter, pneumatic, suitable for plasma, laser, abrasive blasting, grinding gypsum, cement, plastics, and all types of dry dust. The filter is pneumatically cleaned with pulses of compressed air during operation, ensuring high device efficiency. Highly efficient Jet-Pulse cleaning system with low compressed air consumption. Model: Delta Comp 1500-5/9 SB Crodpfx Aiezpxdkezei Fan power: 5.5 kW Capacity: 1500 m3/h Filtration area: 23.75 m2 Inlet diameter: 150 mm Height: 2.16 m Width: 1.05 m Depth: 1.92 m Weight: 1200 kg Stock number: 1158

Condition: refurbished (used), functionality: fully functional, gearing type: mechanical, Year of construction: 2001, operating hours: 21,000 h, Float dredger for sale. Useful production depth from until 16 meters. The bucket conveyor consists of 46 members, it brings up about 3 m3 of material in a single rotation. The machine has a capacity of approx. 90-120 t/h depending on the depth. The length of the basic machine is 20 m, to which 4 pieces of 20 m floating conveyors with 650mm belt width and a 30 m discharge conveyor are connected together with the associated power cable. The floating dredger was completely renovated 4 years ago. The drive of the bucket conveyor has recently been modernized with a frequency converter for torque and speed control. The machine can be seen in operation near Letenye. As an option, a 400 kVA diesel aggregate is available for the machine, which allows the machine to be operated independently of the electrical network. Crjdpfx Aevv Nwxoizoi

Year of construction: 2020, condition: used, functionality: fully functional, Unused Suction and Discharge Hose – 63 / 70 / 80 / 90 / 100 / 127 mm For sale: 13 rolls of new and unused heavy-duty suction and discharge hose in various diameters. Durable green suction and discharge hose, suitable for pumping and transporting water and other compatible liquids. The hose has a thick wall and is reinforced, and can be used on both the suction and discharge sides of pump systems. Available diameters: 63 mm / 70 mm / 80 mm / 90 mm / 100 mm / 127 mm Total quantity: 13 rolls Codjz Er Skopfx Aizori Condition: New / unused Type: Reinforced suction and discharge hose Color: Green Quantity: 13 rolls in various sizes Suitable for water pumps, irrigation systems, agriculture, construction, industry, drainage, and various temporary or permanent pumping systems. Collection from VADO Technische Groothandel in Uden, The Netherlands. Price EXW Uden – transport costs are not included. Shipping can be arranged; please inquire about transport costs in advance. We also have various other sizes and types of hoses, pumps, couplings, and installation materials in stock.

Condition: excellent (used), mileage: 1,22,085 km, first registration: 03/2016, fuel type: diesel, axle configuration: 8x4, wheelbase: 4,600 mm, fuel: diesel, fuel tank capacity: 500 l, brakes: engine braking, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, fog lights, navigation system, power mirror, second fuel tank, soot filter, spoiler, = Additional Options and Equipment = - Aluminum fuel tank - Brake booster - Speed limiter - Refrigerator - Air suspension - Air horn - Particulate filter - Reversing camera - Sun visor - Stability control - Toolbox - Power Take-Off (PTO) - Central lubrication = Additional Information = Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Unladen weight: 29,420 kg Transmission Transmission: I-SHIFT, automatic Axle Configuration Front axle: Steerable Rear axle 1: Twin tires Rear axle 2: Twin tires Rear axle 3: Lift axle; steerable Functional Body brand: MTS DINO 5 4A 14T 36000V Condition Technical condition: very good Visual condition: very good Financial Information Price: On request VOLVO FMX 8x4 Tridem MTS DINO 5 Suction Excavator EURO 6 L PACKAGE 510 HP DRIVE 8X4 TRIDEM, LAST AXLE LIFTABLE AND STEERABLE WHEELBASE 460 CM AIR SUSPENSION LARGE FMX CAB WITH AIR-CONDITIONING, CAMERA, NAVIGATION, REFRIGERATOR Cedpfx Asuxrvaoizjri DIFFERENTIAL LOCK AUTOMATIC TRANSMISSION MTS DINO 5 SUCTION EXCAVATOR TYPE 4A14 T 36,000 V DOUBLE TURBINES!!! HYDROSTATIC DRIVE WITH REMOTE CONTROL POWER BOOM WITH ROTARY HEAD CENTRAL LUBRICATION 2X REMOTE CONTROL EXTRA HIGH-PRESSURE PUMP UNIT WITH HOSES AND GUN EXTRA AIR VALVES AT THE REAR OF THE TRUCK TO OPERATE AIR TOOLS SUCH AS A HAMMER COMPRESSOR 4,041 HOURS FAN 4,041 HOURS ALL AVAILABLE MANUALS FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WE SPEAK GERMAN HABLAMOS ESPAÑOL WE SPEAK ENGLISH

Year of construction: 2024, condition: used, Max. volume flow rate: 1,260m³/h, possible number of filter stages: 1, 2, operating voltage: 3x 400V, PE, N, frequency: 50Hz, rated power: 1.8-2.9kVA, max. rated current: 2.7-6.6A, upstream fuse: 16A, mains connection three-phase AC: 400V, max. rated power: 2.9kVA, max. rated current: 6.6A, upstream fuse: 16A, control cabinet protection rating: IP54, max. differential pressure: 2,380Pa, compressed air quality: factory-supplied, oil-free, dry, max. inlet operating air pressure: 8bar, operating temperature: 5-40°C, weight: 165kg. On-site inspection is possible. Cjdpfez R A Nlex Aizjri