Used Flywheel for sale (152)

Condition: repair required (used), Year of construction: 2014, functionality: not functional, overall weight: 1,500 kg, for excavate Ibodpfx Aexggc Nshksa machine without flywheel drive motor and frequenzy regulator

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 4,000 t, stroke length: 180 mm, throat depth: 500 mm, overall weight: 28,000 kg, controller model: Siemens S7-300, The machine underwent a major overhaul in 2007! The following modifications were carried out on the single-column eccentric press PEE 400: Conversion of the press drive to an adjustable drive with 15-45 strokes of the press ram Conversion of the clutch and brake to a pneumatically actuated Ortlinghaus clutch-brake combination Adjustment of the pinion shaft, flywheel, and bearing cover to the pneumatically actuated clutch-brake combinations Replacement of the rolling bearings for the pinion shaft and flywheel bearing Replacement of all sealing elements and wear parts for the drive Replacement of the seals for the compensator cylinder Replacement of the V-belts for the flywheel drive Replacement of the entire electrical control system Installation of a stroke adjustment mechanism Modification of the safety device Mounting of a tie rod to reduce frame deflection under press force Replacement of the worm gear for ram adjustment, pressure spindle, spindle nut, and pressure ring Refurbishment of the ram guide rails Replacement of the die plate and its support Hydraulics Pneumatics Lubrication Hydraulic pull-down cushion in the press table Tool mounting arms for attaching the press tool Tool lever strips in the table TECHNICAL DETAILS Pressing force: 4,000 kN Adjustable stroke: 30–180 mm Adjustable stroke rate per minute (continuous operation): 15–45 /min Ram adjustment: 150 mm Overhang: 500 mm Ram area (width × depth): 1,200 × 800 mm Table area (width × depth): 1,600 × 1,000 mm Maximum distance between table and ram area: 625 mm MACHINE DETAILS Control: Siemens S7-300 Motor power: 55 kW Motor speed: 1,500 rpm Hydraulic pull-down cushion Piston diameter: 110 mm Piston rod diameter: 90 mm Effective piston area: 95 cm² Pull-down cushion diameter: 230 mm Adjustable counterforce: 10–250 kN Usable pull-down cushion stroke: 90 mm Speed of the pull-down cushion during extension: max. 65 mm/s Hydraulic system Flow rate of the pull-down cushion pump: 29 l/min Drive power of the main pump: 7.5 kW Ibedpfx Ahjzmfnqjkja Oil capacity in the tank: 250 l Flow rate of the circulation pump: 65 l/min Drive power of the circulation pump: 1.5 kW Operating pressure for clutch and brake: 5 bar Operating pressure for ram weight compensation: 5 bar Total machine weight: 28,000 kg

Condition: used, mileage: 2,79,430 km, power: 260 kW (353.50 HP), first registration: 08/2015, fuel type: diesel, number of seats: 41, gearing type: mechanical, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Our internal number: 1014 * NEW PAINT in 05/2026 * MB Tourismo RH K * Vehicle registered and in operation - mileage and condition may therefore vary. * CLUTCH and dual-mass flywheel replaced in September 2025 * In September 2023, over EUR 24,000 net was invested in this vehicle, including, among other things, through Evobus, with a new turbocharger, new retarder, air conditioning compressor serviced, all V-belts and idler/tensioner pulleys replaced, transmission sealed, oil pan sealed, oil change, etc. * First registered 08/2015 * First owner + Will registration * Mileage - original * 6-speed manual transmission * 39+1+1 seats / adjustable sideways and rearwards * Three-point seat belts * Tables on the back of the seats * DVD and monitor * TINTED GLASS * Retarder * Cruise control * Distance control cruise control * ABS, ESP, EBS * Fog lights * Immobilizer * LED lighting * Brake assist * Lane keeping assist * Rear view camera Ibedpfxsy U A S Se Ahkoa * Toilet * On-board kitchen * Nozzle ventilation * Reading lights * Ski box compartment * Trailer hitch * Central locking * Raise/lower * USB connection * NEW TIRES ON FRONT AND REAR AXLE in August 2025 * Vehicle length: 10.32 / 2.55 / 3.37 m+ * etc. * PICK-UP PRICE - FINAL PRICE! * All information without guarantee * Subject to prior sale * We refer to our terms and conditions

Condition: used, mileage: 3,05,700 km, power: 300 kW (407.89 HP), first registration: 09/2010, fuel type: diesel, number of seats: 53, gearing type: automatic, emission class: euro5, color: blue, brakes: retarder, Equipment: ABS, air conditioning, bathroom, * Our internal reference number: 1081 * Vehicle currently registered and in operation – mileage and condition subject to change * Tourismo O 350 - 15 RHD (12 m version) * First registration: 09/2010 * 300 kW / 408 hp – EURO 5 (high-performance engine) * The following work was carried out at EVOBUS at the end of August 2025: * NEW CLUTCH * NEW DUAL MASS FLYWHEEL * NEW TRANSMISSION WIRING HARNESS * Cruise control * Retarder * 51+1+1 – total 53 seats * Armrests between double seats * WHEELCHAIR LIFT * Wheelchair space * Toilet * French inspection book available * Maintenance book also available Isdpfx Ahsy T Dtnekjba * Alloy rims * New air conditioning service in 06/2025 * New customer service in 06/2025, including e.g.: oil change, diesel filter, air dryer cartridge, oil filter, ... * The customer is obliged to independently inspect the condition and specifications of the goods/vehicle! * etc. * All information without guarantee * Subject to prior sale * Please refer to our General Terms and Conditions

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: 04H200001A220067, functionality: fully functional, power: 18.5 kW (25.15 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 200 t, stroke length: 400 mm, table width: 740 mm, table length: 800 mm, distance table to ram: 444 mm, clearance between the columns: 2,826 mm, overall weight: 12,500 kg, Equipment: CE marking, safety light barrier, We are offering this well-maintained Dirinler 1000C-2000 P61 eccentric press, year of manufacture 2022. Year of manufacture: 2022 Nominal pressing force: 2000 kN Distance between table and ram: 444 mm Stroke length: 25–400 mm Stroke rate: 50–70 min⁻¹ Max. ram adjustment: 102 mm Clutch-brake unit pressure: 5.5 bar Table dimensions: 800 × 740 mm Power supply: 3/N/PE 400 V 50 Hz Control voltage: 24 V Motor power: 18.5 kW Max. flywheel speed: 32 min⁻¹ Max. allowable upper tool weight: 2000 kg Iodoy Icnmjpfx Ahkjba Machine weight: 12,500 kg Sound level: 75 dB(A) Overrun time: 182 ms Overrun distance: 52 mm Safety distance: 2826 mm Protection class: IP54 If you have any questions or require further information, please contact us via message or phone.

Condition: new, MACC SPECIAL 411 CSO band saw with gravity feed New, CE compliant The key features of the machine (blade support rigidity, flywheel sizing, band guide, band tensioning) have been the subject of careful study in order to prevent band stress, increase its lifespan, improve cutting linearity, and reduce cutting time. – Band saw with arc-cut, adjustable by a hydraulic circuit, manual bar feed and vice closure, manual head return – Vertical rotation on a pin with adjustable tapered roller bearings, free of play – Band drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear – Appropriately sized flywheels – Robust band guides made with sealed guide bearings and adjustable carbide inserts – Band tension obtained via an electromechanical device with a microswitch-controlled blade rotation – Vice with quick-feed device – Safety device on the flywheel cover, on the control handle, and on the blade – Hydraulic cylinder for controlled descent – Cutting thickness 1.2 mm – Cutting range 45° left, 60° right – Adjustable stop for cuts of the same size – Low-voltage 24 V system Ibsdpjficb Tefx Ahkja – 0.06 kW electric pump for band cooling – Stand with drawer for chip collection and removable tank for coolant – Machine designed for movement with a pallet truck

Condition: new, Semi-automatic band saw for cutting medium and large-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Band control with a motor driven by an inverter and a special gearbox with a bronze gear and a hardened and ground worm gear. Appropriately sized flywheels. Robust band guides made with sealed guide bearings and adjustable carbide inserts. Ibjdpfx Ajfh R Tushksa Band tension is achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm Cutting range: 60° left / 60° right Brush band cleaning device Hydraulic power unit motor: 0.37 kW Electric pump: 0.09 kW for band cooling Vise, jaw height: 250 mm Vise, jaw length: 200 mm Work table height: 760 mm Machine weight: 1250 kg / 12260 N

Condition: new, Semi-automatic band saw for cutting medium-sized solid bars and profiles, offering high performance and excellent cutting accuracy. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. Belt drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Properly sized flywheels. Heavy-duty belt guides made with sealed guide bearings and adjustable carbide inserts. Belt tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover and on the blade. Cutting thickness: 1.5 mm. Cutting angle: 60° left, 60° right. Adjustable stop for making cuts of the same size. Brush-type belt cleaning device. Hydraulic power unit motor: 0.37 kW. Electric pump: 0.09 kW for belt cooling. Vise, jaw height: 200 mm. Vise, jaw length: 185 mm. Ijdsfibd Tepfx Ahkoba Worktable height: 760 mm. Machine weight: 820 kg.

Condition: new, MACC 320 MS semi-automatic bandsaw New item – “CE” marked Technical data sheet attached. Available for immediate delivery, subject to prior sale. The key features of the machine (blade support rigidity, flywheel sizing, blade guide, blade tensioning) have been the subject of careful study in order to prevent blade yielding, increase durability, improve cutting linearity, and reduce cutting time. Vertical rotation on a spindle with adjustable tapered roller bearings, free of play. Iedefibfajpfx Ahkoba Blade drive with a two-speed motor and a special gearbox with a bronze gear and a hardened and ground worm gear. Flywheels sized appropriately. Robust blade guides made with sealed guide bearings and adjustable carbide inserts. Blade tension achieved via an electromechanical device with a microswitch-controlled blade rotation. Safety device to prevent accidents on the flywheel cover, the control knob, and the blade. Cutting thickness: 1.2 mm Cutting range: from 0 to 60° to the right Adjustable stop for cuts of the same size. 0.06 kW electric pump for blade cooling. Operation: Starting the cutting cycle via the start button; the machine: 1. closes the clamp and activates the blade motor 2. lowers the arm for cutting 3. the arm returns to its starting position 4. stops the blade motor 5. opens the clamp Manual cutting option available. ACCESSORIES AVAILABLE UPON REQUEST: Single-phase 69 m/min motor Variable speed drive from 20 to 90 m/min

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor, and the special gearbox, complete with a bronze gear, features a hardened and ground worm gear. Appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable tungsten carbide inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned during blade rotation. Equipped with a safety device to prevent accidents on the flywheel cover and the blade, the machine is completed by a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor 2. lowers the saw frame for cutting 3. the saw frame returns to its starting position 4. stops the bandsaw motor 5. opens the vice Manual cutting option available. Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Iodpfsfh R Tyox Ahksba Cutting range: 45° left to 60° right Stop for cuts of the same size: Adjustable Electric pump for bandsaw cooling: 0.06 kW

Condition: new, Showroom promotion... NEW, unit No. 1 available for immediate delivery. CE certified. The MACC SPECIAL 335 MS is a semi-automatic bandsaw for cutting solid bars and small-sized profiles, offering high performance and excellent precision. The robust structure provides the machine with the necessary rigidity and precision for the cutting unit. The bandsaw drive is equipped with a two-speed motor and a special gearbox complete with a bronze gear, hardened, and ground worm screw. The appropriately sized flywheels and robust bandsaw guides are made with sealed ball bearings and adjustable Widia inserts. Using an electromechanical microswitch control, the bandsaw can be tensioned with the rotation of the blade. Equipped with a safety device on the flywheel cover and the blade, the machine is completed with a rotating table for supporting the material and a vice with a quick-feed device. Operation: Starting the cutting cycle via the start button, the machine: 1. closes the vice and activates the bandsaw motor; 2. lowers the saw arm for cutting; 3. the saw arm returns to the starting position; 4. stops the bandsaw motor; 5. opens the vice. Manual cutting is also possible. Cutting speed (m/min): 38-77. Cutting thickness (mm): 1.2. Cutting range: 45° left, 60° right. Stop for cutting the same size: adjustable. Electric pump for bandsaw cooling: 0.06 kW. Cutting capacity at 0° (round, square, rectangular): 260 / 250x250 / 220x330. Cutting capacity at 45° left (round, square, rectangular): 225 / 210x210 / 160x225. Cutting capacity at 45° right (round, square, rectangular): 215 / 200x200 / 160x210. Cutting capacity at 60° right (round, square, rectangular): 130 / 130x130 / 130x140. Blade dimensions: 3010x27x0.9. Weight [kg]: 415. Iedpfx Aheg S Ui Ajkoba

Condition: new, Brand new machine No. 1 available for immediate delivery!! Isdpofibfgefx Ahksba “CE” certified Made in Italy Cutting capacity: 0° = round tube mm 230 – square tube mm 220 – rectangular tube mm 170 x 300 45° = round tube mm 200 – square tube mm 180 – rectangular tube mm 180 x 230 60° = round tube mm 130 – square tube mm 120 – rectangular tube mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on a pin with adjustable tapered roller bearings, ensuring no play. Belt drive with a two-speed motor and a special gearbox with bronze gear and hardened and ground worm gear. Flywheels appropriately sized. Robust belt guides made with sealed guide bearings and adjustable Widia pads. Belt tension obtained via an electromechanical device with a microswitch-controlled blade rotation. Vise with quick-locking device. Safety device on the flywheel cover, control knob, and blade. Cutting thickness 1.2 mm Cutting range from 0 to 60° to the right Adjustable stop for cuts of the same size Low-voltage 24 V system 0.06 kW electric pump for belt cooling The fundamental characteristics of the machine (blade support rigidity, flywheel sizing, belt guides, belt tensioning) have been the subject of careful study to prevent belt yielding, increase its lifespan, improve linearity, and reduce cutting time.

Condition: used, Year of construction: 2016, functionality: fully functional, overall weight: 2,000 kg, color: black, power: 720 kW (978.93 HP), output voltage: 400 V, output frequency: 50 Hz, continuous power (apparent): 800 kVA, Containerized Rotary UPS System Featuring Marelli Generator MJB 400 LB4 B2 & Rotabloc Flywheel Technology Model:MJB 355 MB4 B2 Rated Power: 900 kVA, 400V / 920 kVA, 440V Active Power: 720 kW Voltage: 400 V / 440 V Frequency: 50 Hz / 60 Hz Rated Current: 1155 A, 400V / 1207 A, 440V Speed: 1500 / 1800 rpm Ijdpfowx H Hzox Ahkjba Power Factor: 0.8 Insulation Class: H Weight: 1950 kg Protection class: IP23 Bearings: 6317 C3 Lubrication: Mobil Polyrex EM Rotabloc RBT Alternator (Flywheel-Based UPS) Model Type: MJB-355 UPS Power Limitation:500 kVA Voltage Range: 400 V ±12.5% Current: 722 A Frequency: 50 Hz Speed: 1500 rpm Weight: 1950 kg Manufactured in Belgium Features & Benefits Rotary UPS – No batteries required Compact footprint with integrated cooling Ideal for grid stability and critical systems Reliable European engineering (Belgium & Italy) CE marked, ready for international use

Condition: used, Year of construction: 1971, pressure capacity max. 80 t Stroke 500 mm table surface area 960 x 810 mm spindle pitch 72 daylight between the columns 950 / 540 mm passage 640 mm machine weight ab. 4500 kg dimensions of the machine ca. 2,0 x 2,0 x 3,85 m Hydraulic quick adjustment 500mm Isdovxwzkjpfx Ahkjba Flywheel Ø2000mm 4 prism bases for straightening waves different support frames

Condition: ready for operation (used), Year of construction: 2016, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2016. This AIDA 315/2MR/LD/TE3 features a press capacity of 315 tons and a stroke length of 250 mm. It includes a maximum die size of 2,250 × 750 mm and a maximum die weight on slide of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE3 machine we have for sale. Contact us for further details. • Main technical data: • Press capacity: 315 ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above BDC • Normal crankshaft stop position: TDC • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg • Machine structure: • Frame design: double upright (straight-side) frame • Drive system: double connecting rod (double pitman) • Slide guidance: guided slide • Motion type: mechanical crank press • Slide movement: vertical reciprocating motion • Main axis movement: rotary crankshaft drive • Ram/slide adjustment: motorized • Cushion system: • Type: integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) • Clutch & brake system: pneumatic • Lubrication system: centralized automatic lubrication • Safety system: integrated • Operator protection: included • Automation ready: yes • Performance and safety highlights: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Integrated safety and operator protection systems • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: Isdpfxjzcpwio Ahkoba • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2018, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2018. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It has a maximum die size of 2,250 × 750 mm and can accommodate a maximum die weight of 10,200 kg. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Press capacity: 315 ton • Rated capacity: 3,150 kN • Rated capacity point: 12.7 mm above BDC Ibedpfjzcptwjx Ahkea • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Maximum die size: 2,250 × 750 mm • Maximum die weight: 10,200 kg • Flywheel speed: 628.5 rpm • Operating speed: 15–40 spm • Maximum clutch engagements: 24 per min • Stopping time: 0.386 s • Safety distance: 618 mm • Cushion force: 3,450 daN @ 0.6 MPa • Counterbalance force: 102 kN @ 6 bar • Frame type: Double upright, double-crank • Clutch/brake system: Pneumatic • Lubrication system: Centralized automatic • Slide guiding: Precision guided • Drawing cushion: Integrated • Counterbalance cylinders: Yes • Safety system: Integrated • Operator protection: Yes • Automation ready: Yes • Drawing cushion: Integrated (Included) • Counterbalance cylinders: Yes (Included) • Safety system: Integrated (Included) • Operator protection: Yes (Included) • Automation ready: Yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: ready for operation (used), Year of construction: 2013, stroke length: 250 mm, overall weight: 58,000 kg, Mechanical stamping press manufactured in 2013. This AIDA 315/2MR/LD/TE 3 features a press capacity of 315 tons and a stroke length of 250 mm. It is designed for high-precision stamping operations with a robust double-upright frame and integrated drawing cushion. If you are looking to get high-quality stamping capabilities, consider the AIDA 315/2MR/LD/TE 3 machine we have for sale. Contact us for further details regarding this machine. • Main technical data: • Press capacity: 315 Ton • Rated press force: 3,150 kN • Rated capacity point: 12.7 mm above Bottom Dead Center (BDC) • Normal crankshaft stop position: Top Dead Center (TDC) • Stroke length: 250 mm • Slide adjustment: 160 mm • Shut height: 700 mm • Slide speed: 15–40 strokes/min • Maximum flywheel speed: 628.5 rpm • Maximum clutch engagements: 24 engagements/min • Stopping time: 0.386 s • Safety distance: 618 mm • Die and working area: • Maximum die size: 2,250 × 750 mm • Maximum die weight on slide: 10,200 kg Ibjdpfx Ahozcppxeksa • Machine structure: • Frame design: Double upright (straight-side) frame • Drive system: Double connecting rod (double pitman) • Slide guidance: Guided slide • Motion type: Mechanical crank press • Slide movement: Vertical reciprocating motion • Main axis movement: Rotary crankshaft drive • Ram adjustment: Motorized slide adjustment • Cushion system: • Type: Integrated drawing cushion • Maximum cushion force: 3,450 daN at 0.6 MPa • Systems and safety: • Counterbalance cylinders: Yes • Counterbalance force: 102 kN at 6 bar • Clutch & brake system: Pneumatic • Lubrication system: Centralized automatic lubrication • Safety system: Integrated • Operator protection: Included • Automation ready: Yes • Performance and safety notes: • High-rigidity double-upright frame construction • Double-pitman drive for improved slide parallelism and load distribution • Pneumatic clutch-brake for reliable operation and fast stopping • Designed for integration with automatic feeding and transfer systems • Auxiliary systems: • Counterbalance cylinders: yes (counterbalance force 102 kN at 6 bar) (Included) • Clutch & brake system: pneumatic (Included) • Lubrication system: centralized automatic lubrication (Included) • Drawing cushion: integrated (Included) • Safety system: integrated (Included) • Operator protection: yes (Included) • Automation ready: yes (Included) • Other optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: used, mileage: 2,72,115 km, power: 62 kW (84.30 HP), fuel type: diesel, gearing type: mechanical, first registration: 04/2018, next inspection (TÜV): 07/2028, emission class: euro6, color: white, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, * €9,900.00 net * Volkswagen T6 Kombi 2.0 Tdi L1H1, 9 seats, air conditioning, sliding door, Euro 6 * Seats: 9 (3+3+3) * 5-speed transmission * Front airbags * Armrest * Electric windows * Electric mirrors * Central locking * Steel rims * Isofix * Air conditioning * ABS * ASR * Radio/CD player * Daytime running lights * Start/Stop automatic * Tire pressure monitoring * Sliding door on the right * Wheelbase: 300 cm * Unladen weight: 1738 kg Iodpfx Ahoyy T Nxekoba * Permissible total weight: 3000 kg * Passenger car registration * Vehicle no. 58 Timing belt replaced at: 233,000 km Dual-mass flywheel makes noise. OPENING HOURS Monday - Friday from 09:00 to 17:00 (by appointment only...) CONTACT INFORMATION Telephone: WhatsApp Email: Transit and customs registration plates (export number) available from us. Errors, typos and prior sale are subject to change. Technical specifications and equipment features must be checked separately. The condition as per the contract is only the one that is inspected on site and confirmed in writing at the time of purchase. We kindly request you to schedule an appointment.

Condition: used, Year of construction: 2002, Technical details: rated capacity: 1670 kVA rated capacity: 1500 KW voltage: 400 / 50 V / Hz Number of working hours: 800 h This UPS system is ideal for fault-free operation under the demanding environmental conditions that can occur in industrial applications. Iedpfx Asu Nzwujhkoba Suitable for stabilizing mains systems, for example. The UPS system consists of the Powerbridge (a flywheel mass with attached generator) and a Uniblock (electric motor/generator block). The Uniblock supplies the power for the customer modules without grid faults. The Powerbridge serves as energy storage. In the event of a mains failure, the Powerbridge briefly takes over the power supply (at full load, the power supply is maintained for 39 seconds). Energy storage unit type PB60+ with bridging time 39sec. A diesel engine is connected via an overrunning clutch. This means that as soon as the engine has reached the speed of the Unibklock, it pulls the generator up to the synchronous speed and thus takes over the power supply. At the same time, the Powerbridge is supplied with energy again. *

Condition: used, Year of construction: 2014, Technical details: Ijdju Nfttspfx Ahkjba Punching capacity: 500 kN cutting capacity : 9,0 t control: Siemens Touch Panel S7 ram adjustment: 80 mm stroke of ram - fixed: 170 mm no. of strokes: 20 - 120 Hub/min distance between columns: 1140 mm dayligth: 350 - 430 mm column travel -side: 315 mm table surface area: L x B 1100 x 400 mm ram surface area: L x B 1100 x 400 mm passage opening in table: 950 x 100 mm table height over floor: 1100 mm column travel -side: 315 mm drive AC: 230 VAC/24 VDC kW operating pressure: 6 bar Number of working hours: Maschine 1: 6654 h Number of working hours: Maschine 2: 5970 h total power requirement: ca. 30 kW je Maschine kW weight of the machine ca.: 9,5 je Maschine t 2 transfer presses - PRESS LINE This transfer press line is currently equipped for the production of vehicle sockets/electrical sockets. Plant equipped with: 1. decoiler PM245 coil weight 2 t, coil width up to 450 mm 2. controlled strip feeder (roller feeder) 3. press 1: Deep-drawing press with five pneumatic ejectors (can be individually adjusted and expandable) 4. feeding device from the company Püschel Output up to 100 parts/minute Belt swivel conveyor for discharging the deep-drawn parts/ forwarding via steep conveyor into the gate swivel conveyor/ forwarding into the infeed of the punching press via mechanical oscillating conveyor rails 5. punch press (with preparation for ejector) Various safety fences, guards, safety switches, monitoring systems (adapted to machine guidelines) Optional: 1 unused spare flywheel gearbox Optional: complete tool set for the production of vehicle sockets (e.g. for cigarette lighters or electrical appliances) incl. complete technology and technical drawings (DXF) *

Condition: new, Year of construction: 2025, pressing force: 80 t, table width: 600 mm, table length: 800 mm, table height: 850 mm, drop-through hole in table: 190 mm, ram adjustment: 85 mm, stroke adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, Ibjdevxhb Uepfx Ahksa o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 80 Tons Table-Ram Distance 400 Mm Distance Between Walls 880 Mm Ram Adjustment 85 Mm Press Approximate Width 1150 Mm Press Approximate Depth 1500 Mm Press Approximate Height 2500 Mm Table Hole Diameter 190 Mm Table Size 600 / 800 Mm Mold Clamping Housing Diameter 40 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 100 Mm Stroke Number/Minute 50 Units/min. Engine Power 7.5 KW Engine Speed 1450 RPM Approximate Weight 6,500 Kg

Condition: new, Year of construction: 2025, pressing force: 150 t, table width: 720 mm, table length: 1,000 mm, drop-through hole in table: 220 mm, ram adjustment: 120 mm, stroke adjustment: 125 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: Türkiye WARRANTY PERIOD: 24 MONTHS DELIVERY PERIOD: IMMEDIATELY FROM STOCK GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Body and welded parts will be stress relieved by vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, Ibsdpfx Ahjvyrywokja o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 150 Tons Table-Ram Distance 500 Mm Distance Between Walls 1080 Mm Ram Adjustment 120 Mm Press Approximate Width 1400 Mm Press Approximate Depth 1900 Mm Press Approximate Height 3000 Mm Table Hole Diameter 220 Mm Table Size 720 / 1000 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 450 / 800 Mm Table Dimensions from Floor 900 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 15 + 0.75 KW Motor Speed 1450 RPM Approximate Weight 12,000 Kg

Condition: new, Year of construction: 2025, pressing force: 125 t, table width: 700 mm, table length: 900 mm, drop-through hole in table: 210 mm, ram adjustment: 100 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 125 Tons Table-Ram Distance 500 Mm Distance Between Walls 1000 Mm Ibsdpfxjvxhqvj Ahkea Ram Adjustment 100 Mm Press Approximate Width 1250 Mm Press Approximate Depth 1750 Mm Press Approximate Height 2850 Mm Table Hole Diameter 210 Mm Table Size 700 / 900 Mm Mold Clamping Housing Diameter 55 Mm Ram Size 340 / 550 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 125 Mm Stroke Number/Minute 50 Units/min. Motor Power 11 KW Motor Speed 1450 RPM Approximate Weight 8,500 Kg

Condition: new, Year of construction: 2025, pressing force: 300 t, table width: 900 mm, table length: 1,200 mm, drop-through hole in table: 260 mm, ram adjustment: 150 mm, stroke adjustment: 200 mm, Equipment: safety light barrier, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS GENERAL FEATURES OF D TYPE ECCENTRIC PRESSES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be available within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 300 Tons Table-Ram Distance 530 Mm Distance Between Walls 1280 Mm Ram Adjustment 150 Mm Press Approximate Width 1700 Mm Press Approximate Depth 2200 Mm Press Approximate Height 3500 Mm Table Hole Diameter 260 Mm Table Size 900 / 1200 Mm Mold Clamping Housing Diameter 60 Mm Ram Size 470 / 900 Mm Table Dimensions from Floor 1000 Mm Stroke Adjustment 20 / 200 Mm Stroke Number/Minute 38 Pcs/min. Engine Power 30 + 2.2 KW Ibsdjvyr Easpfx Ahksa Engine Speed 1450 RPM Approximate Weight 18,000 Kg

Condition: new, Year of construction: 2025, pressing force: 100 t, table width: 700 mm, table length: 880 mm, table height: 850 mm, drop-through hole in table: 200 mm, ram adjustment: 85 mm, stroke adjustment: 110 mm, Equipment: safety light barrier, D TYPE ECCENTRIC PRESSES GENERAL FEATURES o   Steel construction body, o   Stress relief will be applied to the body and welded parts with vibration. o   Parallelism and perpendicularity tolerance between tables in accordance with ISO and DIN standards o   Pneumatic clutch and brake combination – OMPI-Italy o   Ram supported by 8 guideways o   Ram cushioning cylinder o   Parts such as ram, connecting rod, claw mouth are cast steel, GS52 o   High strength solid crankshaft – 4140 o   Inside of connecting rod will be bronze, (Zr14) o   Rear Flywheel o   Spare table, Ibsdpfevxhprex Ahkoa o   Hydraulic fuse, o   Motorized table-ram adjustment o   Automatic central lubrication, o   Pneumatic pedal with latch and timed double hand control, o   Electric counter, o   PLC application and touch screen -DELTA o   Electrical switchgear materials SIEMENS-SCHNEIDER o   CE application - OPTIONAL o   Finger protected light barriers, -SICK, LEUZE o   Safety PLC (Controls the entire electrical system, valve, double lever and pedal) - PILZ o   Double coil safety valve – GPA, TOPAIR o   Locked position switch and panel, o   Safety wedge, o   Protective enclosures will be within the scope of CE. TYPE D TYPE MONOBLOCK BODY Capacity 100 Tons Table-Ram Distance 450 Mm Distance Between Walls 960 Mm Ram Adjustment 85 Mm Press Approximate Width 1230 Mm Press Approximate Depth 1650 Mm Press Approximate Height 2500 Mm Table Hole Diameter 200 Mm Table Size 700 / 880 Mm Mold Clamping Housing Diameter 50 Mm Ram Size 245 / 410 Mm Table Dimensions from Floor 850 Mm Stroke Adjustment 10 / 110 Mm Stroke Number/Minute 50 Units/min. Engine Power 11 KW Engine Speed 1450 RPM Approximate Weight 7,500 Kg