Used Flywheel for sale (219)

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Bodpfxev Dwirs Abzsww

Condition: good (used), Year of construction: 2002, overall weight: 9,500 kg, pressing force: 100 t, Model: PREN-100 Year: 2002 Weight: 9.500 Kg Rated force: 100Tn Type: Pneumatic clutch eccentric Stop position: 580mm Closing height: 450mm Maximum flywheel RPM: 500mm Travel: 13-130mm Max. carriage adjustment: 80mm Motor: 11 Kw 380 V 50 Hz Min. air pressure : 3,5 - 6 bars Stopping time: 285ms Bodpfxsuif Tkj Abzjww Safety distance: 486 mm

Condition: used, Year of construction: 2012, functionality: fully functional, power: 800 kW (1,087.70 HP), nominal power: 640 kW (870.16 HP), rotational speed (max.): 1,500 rpm, type of cooling: air, color: blue, output voltage: 400 V, output current: 1,155 A, nominal power (apparent): 800 kVA, output frequency: 50 Hz, Rotary UPS System – 800 kVA – Marelli + Rotabloc Availability: In stock (2 units) Location: UK High-quality Rotary UPS System with integrated components: ✅ Marelli Generator – MJB 400 LB4 B2 ✅ Rotabloc Alternator – ALT-800 ✅ Rotabloc Flywheel Accumulator – ACC-1000 Technical Specs Marelli Generator 800 kVA 400 V / 480 V – 50/60 Hz 1155 A / 962 A 1500 / 1800 rpm Weight: 2709 kg Made in Italy (2012) Rotabloc Alternator (ALT-800) 800 kVA 400 / 480 V 50 / 60 Hz Weight: 2750 kg Made in Belgium (2012) Flywheel (ACC-1000) 800 kW Drum speed: up to 3000 rpm Weight: 5250 kg Made in Belgium ✅ Advantages No batteries required – flywheel technology Bedpowuyzwsfx Abzeww Immediate response during grid failure Built to ISO9001 / CE standards Reliable, compact, and scalable

Condition: new, Used MACC SPECIAL 411 CSO Gravity descent bandsaw New CE The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, band guides, band tensioning) have been carefully studied to avoid the yielding of the band, increase its duration, improve linearity and cutting time. - Sawing machine with cut by falling arc regulated by a hydraulic circuit, manual bar feeding and vice closing, manual head return. - Vertical rotation on pivot with adjustable conical bearings without backlash - Band control with two-speed motor and special reducer with bronze gear and hardened and ground worm screw - Appropriately sized flywheels - Sturdy belt guides made of watertight bearings and adjustable widia plates - Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control - Vice with rapid approach device - Accident prevention safety device on the flywheel cover, on the control knob and on the blade - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right Bwsdpfx Abjficb Tozjw - Adjustable stop for cuts of the same size - 24 V low voltage system - 0.06 kW electric pump for belt cooling - Pedestal with drawer for chips collection and extractable tank for the cooling liquid - Machine predisposed

Condition: new, Thomas Super Trad 301 So Easy - Semi-automatic metal band saw Promotional price € 9,400 instead of € 11,100 excl. VAT - The SO EASY saw allows a complete cutting cycle without the operator being constantly present thanks to the hydraulic control system for lowering the saw frame - Hydraulic vice Bwodpfxsuzhpze Abzow - Limit switch for adjusting the saw frame return directly above the material to be cut - Selector switch for switching to MANUAL cutting mode with button for quick access to the material to be cut - Central control panel on the front of the machine with luminous alarm system - Automation is controlled by a safety relay - Highly efficient hydraulic pump and low energy consumption - Practical and reliable for all cutting needs of medium-sized ferrous materials - Large round work table "plateau" that rotates with the miter of the saw blade and guarantees excellent support for the material to be cut. This system prevents the saw blade from cutting the work table, as is the case with conventional band saws. - Solid cast iron vice with handwheel and quick release lever - The vice is equipped with a practical handle for quick movements and is mounted on a rail to allow lateral movement - Cuts possible from 0 ° to 60 ° to the right and 45 ° to the left - Saw blade rotation with 2 electric speeds - Saw blade tensioning by handwheel and safety microswitch in case of blade breakage or insufficient blade tension - Coolant electric pump - Saw blade cleaning brush Specifications - Capacity round 0 °: 255 mm - Capacity round < 45 °: 160 mm - Capacity round 45 ° >: 200 mm - Capacity round 60 ° >: 110 mm - Capacity square 0 °: 250 mm - Capacity square < 45 °: 160 mm - Capacity square 45 ° >: 190 mm - Capacity square 60 ° >: 110 mm - Capacity rectangle 0°: 300 x 220 mm - Capacity rectangle < 45°: 190 x 100 - 150 x 170 mm - Capacity rectangle 45° >: 190 x 170 mm - Capacity rectangle 60° >: 110 x 130 mm - Saw band dimensions: 2750 x 27 x 0.9 mm - Saw band speed: 33/66 m/min - Vice clamping width: 305 mm - Saw frame inclination: 30° - Working height: 940 mm - Gearbox reduction ratio: 40/1 I - Flywheel diameter: 300 mm - 3Ph electric motor: 1.0 - 1.4 kW - Electric pump: 0.11 kW - Machine dimensions WxHxD: 800 x 1600 x 1800 mm - Machine weight: 440 kg

Condition: excellent (used), Year of construction: 2019, Bandsaw MACC SPECIAL 411 CSO, year 2019 Condition: very good - Sawing machine with cutting band falling controlled by hydraulic - Vice closure operated manually - Manual head return - Vertical rotation on bolt with adjustable tapered bearings without backlash - High-capacity band control by two-speed motor and special reducer with bronze gear tempered and ground worm screw - Blade tensioning obtained per manual rotation of the handwheel and guaranteed by microswitch - Vice with device for quick approach - Accident-preventing devices on flywheel casing, on control handle, on blade, and external guard - Hydraulic cylinder for controlled descent - Cutting thickness 1,2 mm - Cutting range 45° left 60° right - Adjustable end stop for cuts of the same size - 24 V low voltage control Bodpopmaubsfx Abzeww - 0,06 kW power-driver pump for band cooling - Pedestal with chip collection tray and removable tank for coolant - Inlet conveyour

Year of construction: 2003, condition: ready for operation (used), There are 3 retrofit Feintool fineblanking presses with controls from Pneutronik available. 1) Feintool GKP-F 160, year of manufacture: 2001, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, max. material thickness: 6mm, stroke height: 62mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. 2) Feintool GKP-F 160, year of manufacture: 2003, cutting force: 100t, total pressing force: 160t, head pressure: 40t, table pressure: 50t, stroke rate: 70/min, power: 22kW, material thickness: 6mm, stroke height: 60mm, machine dimensions X/Y/Z: approx. 1800mm/1800mm/2800mm, weight: approx. 9000kg, control: Pneutronik. Presumably there is bearing damage to the flywheel. 3) Feintool GKP-F 250, year of manufacture: 2000, total pressing force: 250t, head pressure: 75t, table pressure: 75t, ejector force: 18t, material thickness: 10mm, lifting height: 61mm, machine dimensions X/Y/Z: approx. 2100mm/3100mm/3200mm, weight: approx. 14500kg, control: Pneutronik. Presumably there is bearing damage to the worm shaft. Documentation available. On-site inspection is possible. Bsdsu Dalyopfx Abzsww

Condition: good (used), Year of construction: 2002, overall weight: 5,900 kg, pressing force: 63 t, Model: PREN-63 Year: 2002 Weight: 5900 Kg Nominal force: 63Tn Type: Pneumatic clutch eccentric Normal stop position (PMS): 650mm Closing height (PMI): 350 mm Bwodpfx Aeuifr Hsbzow Travel: 10-100 mm Motor: 5,5Kw 380V 50Hz Max. carriage adjustment: 65mm Air pressure: min. 3,5 max. 6 bars Total stopping time: 278ms Safety distance: 445 mm Maximum RPM at flywheel: 600

Condition: new, Technical data: Minimum cutting width: 300 mm Max cutting width: 400mm Max cutting height with standard blade guide: 350 mm Max cutting height with special blade guide: 410 mm Belt length: 2720 mm Motor power: 1.1 kW Advantages: -They are safe and easy to use machines, manually operated by the operator. -Designed and built to cut materials such as: solid wood, panels, plywood boards, also laminated or edged -They are suitable for both small jobs and mass production -The main advantage that distinguishes MD Dario band saws from conventional models is the articulated arm with a special system of joints that allow the machine to rotate freely in all directions and angles, thanks to which the user can make precise cuts - The saws have 3 rubber-coated flywheels, thanks to which it is possible to perfectly guide the saw and use band blades of different sizes depending on the type of cut Bodpfjmiiktex Abzsww Work table and tilt included.

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N Bjdsfh R Tuspfx Abzoww

Condition: new, Kyori High-Speed-Press VX40-W with Siemens-Control Technical specification: tonnage: 400 KN drive: flywheel with dynamic balancer feeding direction: right to left color: Kyori white RAL 7035 position of main drive: right ram adjustement range: 50 mm shut height : 240 mm max. upper die weight: 180 kg safety doors: front and back tool load area light: 2 LED-lights bolster area (LxW): 950 x 600 mm bolster design: T-slot bolster material: steel bolster thickness: 120 mm Bwjdpfx Abot Upvbjzjw base plate opening (LxW): 760 x 120 mm ram area (LxW): 950 x 450mm ram design: T-slot dimensions: 2120 x 1400 mm total height: 3170 mm weight: (approx.) 9.500 kg strip inlet height: has to be defined strip inlet width: max. 300 mm feed: Vamco SR-150

Condition: excellent (used), Year of construction: 2012, operating hours: 10,700 h, The Jama SBU 8000 machine from 2012 is a solid and proven mechanical scaler, designed specifically for work in difficult mining conditions, especially in underground workings. This model is equipped with a hydraulic hammer for demolishing rocks, which makes it an ideal tool for removing loose rock fragments and preparing workings for further work. The machine from the advertisement is equipped with an EPIROC hammer with an additional new tip! - Note that the cost of such a new JAMA machine from the dealer is as much as 903,000 EURO NET! For the machine itself without any additional devices such as a demolition hammer. - We have 2 identical SBU 8000 machines in our offer, the one from the advertisement is from 2012, and the other from 2008 is almost 10 thousand euro cheaper! Also in the offer: JAMA machine for spraying concrete in tunnels Designed for finishing and securing works in underground corridors and tunnels High efficiency, spraying precision and large working range Ideal for use in mining, tunneling and large infrastructure investments - Key technical features of Jama SBU 8000 (2008/2012) Weight: approx. 30,000 kg Dimensions: length 15 m, width 2.75 m, height 3.1 m Boom reach: from 3 m below the machine level to 9 m above, and over 6 m to the sides Operator's cabin: meets FOPS standards, equipped with an armoured windscreen and a hydraulically controlled explosion-proof cover Drivetrain: two axles, turning radius 5.2 m Stabilisation: four stabilizing outriggers and a blade at the front System safety: "Danger Mode" function enabling quick withdrawal of the machine in case of danger Comfort and ergonomics The operator's cabin has been designed with maximum comfort and safety in mind: Operator's seat: pneumatically suspended Control: joysticks placed in armrests Visibility: cabin tilts by 13° for better visibility during work Additional equipment: shoe washer at the entrance, doors with gas cylinders enabling quick exit of the cabin if necessary In short, we have in our offer: 2X Jama SBU8000 - 2012 and 2008 1X Jama Concrete maschine Inspection report: Machine in good working order purchased from the first owner of the company who made tunnels in Sweden, serviced on an ongoing basis at JAMY service. The price given in the advertisement is NET and is valid for export or for companies! For more information, please contact the seller. Technical data – Deutz TCD 2013 L04 2V/m Parameter Value Engine type Four-stroke, in-line, 4-cylinder Displacement 4.8 liters (4800 cm³) Piston diameter × stroke 108 × 130 mm Compression ratio 18:1 Fuel system Common Rail injection (DCR) or mechanical Maximum power 104–129 kW (140–173 hp) at 2200–2300 rpm Maximum torque 565–670 Nm at 1600 rpm Minimum idle speed 650–900 rpm Fuel consumption (at full load) 208–218 g/kWh Weight (without accessories) Approx. 500 kg Cooling Liquid Emissions EU IIIA / US Tier 3 Rotation direction Counterclockwise (looking at flywheel) Bedewl Izaopfx Abzeww Firing order 1–3–4–2

Condition: used, mileage: 5,49,000 km, power: 375 kW (509.86 HP), first registration: 02/2017, fuel type: diesel, number of seats: 51, gearing type: semi-automatic, emission class: euro6, brakes: retarder, Year of construction: 2017, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, parking heater, 49+1+1 sleeping berths, air conditioning, driver's area air conditioning, retarder, cruise control, lift-lowering system, central locking, 2 refrigerators, armrests, ABS, ASR, ESP, DVD with 2 monitors, radio/CD, reversing camera, central toilet, trailer coupling, Webasto auxiliary heater, driver microphone + tour guide microphone, double glazing, folding tables, footrests, individual air nozzles, reading lights, curtains, luggage compartments, overhead storage, all seats with seat belts, safe, navigation system, retractable flat screens, panoramic glass roof across the entire central aisle, ski box mounting. PowerShift transmission Bjdsw H Uzzspfx Abzeww Clutch renewed incl. dual-mass flywheel at 297,825 km 2024: new tachograph installed Panoramic glass roof across the entire central aisle VERY GOOD CONDITION!!

Condition: like new (used), Year of construction: 2016, functionality: fully functional, Logger's band saw with bark cutter and saw grinder Log band saw • Manufacturer: Primultini • Model: 1400 SHF • Year of manufacture: 2016 • Direction of operation: Left ➢ Cast iron flywheels with a diameter of 1400 mm. Flywheel range of 190 mm by a maximum blade width of 206 mm ➢ Hydraulic lateral movement of the upper and lower blade guides ➢ Blade cleaning sprayer. Centralized flywheel lubrication with electric pump, timer and dispenser ➢ Drive motor power 110 kW Hydraulic trolley • Manufacturer: Primultini • Model: CFN • Year of manufacture: 2016 ➢ 4 independent movable clamping clamps. Max. distance of blades from clamping clamp 1200 mm. ➢ Bwsdswuq Tqjpfx Abzow Automatic log alignment via upper barrier with 20 photocells ➢ 4 independent levers for turning logs, fully hydraulically driven, with an inclination of up to 90° to facilitate tipping ➢ The clamping clamps can be controlled in the following ways: 1. linear movement parallel to the cutting axis 2. rotary movement for centering the log ➢ maximum trolley return speed of 0+200 m/min ➢ hydraulic control unit capacity approximately 90 l ➢ cable drum diameter 660 mm ➢ cable diameter 20 mm ➢ pulley outer diameter 670 mm Debarking machine - Canter • Manufacturer: Primultini • Model: WSF • Year of manufacture: 2016 ➢ External diameter of the cutter 1100 mm ➢ Maximum cutting height 700 mm ➢ Max. stripping thickness 150 mm ➢ Trolley for servicing the cutter mm 90 ➢ Number of knives 3 ➢ Main engine power 90 kW Bark milling machine GK-800-2 with associated transport equipment • Manufacturer: Dinaco • Year of manufacture: 2012 a) Milling trolley with log rotation conveyor ➢ Base length: 6000 mm ➢ Base width: 1520 mm ➢ Number of wheels for rotation: 5 pairs ➢ Wheel diameter: Ø800mm ➢ Rotation speed: v=12-25 m/min ➢ Log rotation by motor-reducer, vector regulation: P=5.5Kw ➢ Power of trolley drive electric motor, vector regulation: P=5.5 kW b) Console with milling head ➢ Working width of head: 300 mm ➢ Lifting, lowering and head pressure: servo hydraulic cylinder ➢ Blocking of head oscillation movement: hydraulic cylinder ➢ Power of main electric motor: P=22 kW c) Seated control panel and electrical cabinet d) Hydraulic log ejector e) Hydraulic unit and hydraulic installation ➢ Unit power 4.0 kW ➢ Flow 24 lit/min f) Log entry chain conveyor g) Hydraulic log feeder h) Inclined slat conveyor Sander for band saw • Manufacturer: Alix s.r.l. • Year of manufacture: 2014

Condition: new, Holzkraft HBS 513 S wood band saw Precision saws with great cutting performance for the professional. Heavy-duty design with high dead weight for maximum running smoothness Particularly quiet and precise running thanks to torsion-resistant machine housing Precisely adjustable aluminum parallel fence Cast flywheels with rubber coating and chip scraper brush Large cast iron saw table, swivels from 0° to +45° with ground and polished surface Precise cutting height adjustment via toothed rack with millimeter scale Two suction ports Automatic release of the saw band brake to adjust the saw band. TECHNICAL DATA: Dimensions and weights Length (product) approx. 1150mm width/depth (product) approx. 950mm Height (product) approx. 2000mm Weight (net) approx. 295kg Connection suction suction connection diameter 2 x 120mm Work table(s) working table length 640mm working table width 500mm Work table height 920mm Work table extension length 150mm Work table widening width 500mm working table inclination 0 - 45 Supply voltage 400V Mains frequency 50Hz output power 3,5kW Cutting range cutting height max. 90°350mm Bsdpfeg Hzw Tex Abzsww Cutting height max. 45°200mm Cutting width max. with fence 415mm Cutting width max. without fence 500mm Saw band speed(s) 1320m/min Flywheel diameter 510mm Saw band length 4100mm Saw band width 25mm Saw band width max. 38 Saw band thickness 0,6mm Saw band guide High quality, fixed saw band guide SCOPE OF DELIVERY: Angle stop Saw band Sliding stick Holzkraft dealer - please send us your inquiry

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. Bjdpfx Abofibd Tjzoww The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Clutch-brake series УВ 31… for presses type КД2324, КД2124, КД2324К, КД2124К, КД2324Е, КД2124Е, КД2128, КД2328, КД2128К, КД2328К, КД2128Е, КД2328Е, КД2126, КД2326, КД2126К, КД2326К, КД2126Е, КД2326Е, H-3222A, HA-3223, HA-3225, H-475, H-481, H-483. The offered brake is new and has 100% confirmed correctness and efficiency of operation. It is also possible to purchase spare parts such as brake discs, friction linings, bushings, body pins, flywheel pins, springs and a set of seals. We offer clutch-brake type: YB3132, YB3135, YB3138, YB3141, YB3144, YB3146 for various guillotines and presses of former USSR origin. The weight of the complete clutch - depending on the specific type - ranges from 200-300 kg. Our offer also includes other parts and accessories for metalworking machines of Russian production (former USSR). Bjdpfev Saxrex Abzjww

Condition: used, Year of construction: 1977, pressure 30 t distance between columns . mm dayligth . mm work stroke 250 mm Bwsdpfxsvpr Tvj Abzow flywheel Ø 900 mm weight of the machine ca. ca. 730 kg Plunger with adjustable prism guide

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 3,800 kg, rotational speed (min.): 560 rpm, total height: 2,880 mm, total length: 2,895 mm, total width: 1,995 mm, We are a company with over 30 years of experience in the trade of machines for the plastics industry. We have the offered machines in stock and we can carry out tests on them on your material. New, efficient RG-56E series mills - (EKO) with a very good price-quality ratio are mainly used for grinding various types of soft and hard material. The optional regrind collection system based on a blower and separating cyclone ensures comfortable and safe work for the operator. Mills from this series are characterized by a compact, compact design and ease of use. Each RG type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted relative to each other as they wear out. Motor overload protection and safe control voltage as standard. P&F Wartacz was founded in 1990 and we are currently the oldest trading company in the PTSz industry, continuously selling injection molding machines, mills, crushers, coolers, conveyor belts, peripheral equipment and spare parts. Rotor diameter (mm): 560 Rotor width (mm): 1200 Power (kW): 75kw Rotor knives (pcs): 10 Fixed knives (pcs): 4 Weight (kg): 3800 Bsdpfx Aewqb Tmsbzoww Possible purchase with exhaust and cyclone instead of a drawer Unused machine available immediately, tests possible before purchase. (dozens of machines in stock)

Condition: new, Holzkraft HBS 433 action set wood band saw For the craftsman. TOP in quality, workmanship and price-performance ratio. Particularly smooth and precise running thanks to a torsion-free machine housing and a solid base made of sheet steel. Cast iron saw table with precisely ground and polished surface Convenient laser device for cutting line marking Quick saw blade clamping via eccentric lever on the rear side of the machine Two speeds as standard Precise 3-roller saw band guides, top and bottom as standard Fast cutting height adjustment via rotary knob and toothed rack with millimeter scale Smooth-running aluminum parallel fence with eccentric quick clamping and magnifying glass Standard angle stop, adjustable 60° on both sides Safety switch for automatic shutdown when door is opened TECHNICAL DATA: Dimensions and weights Length (product) approx. 820mm width/depth (product) approx. 730mm Height (product) approx. 1852mm Weight (net) approx. 130kg Bwedpfx Aeg Hzwzobzsw Connection suction Suction port diameter 2 x 120mm Work table(s) Working table length610mm Working table width 431mm Working table height 950mm working table inclination -10 - 45 Supply voltage 400V Mains frequency 50Hz output power 1,5kW Cutting range Cutting height max. 90°270mm Cutting width max. with stop 370mm Cutting width max. without fence 410mm Saw band Saw band speed(s) 900 / 450m/min Flywheel diameter 430mm Saw band length 3345mm Saw band guide 3-roller precision guide top and bottom SCOPE OF DELIVERY: Angle stop ±60° Laser device for cutting line marking 1 x saw band wood 3345 x 6 x 0,65 mm; 6 tooth 1 x saw blade wood 3345 x 16 x 0,5 mm; 4 tooth 1 x saw band wood 3345 x 25 x 0,5 mm; 4 tooth

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Bsdpfsfibfajx Abzoww Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 1,245 kg, rotational speed (min.): 560 rpm, total height: 1,830 mm, total length: 1,760 mm, total width: 1,370 mm, We are a company with more than 30 years of experience in the trade of machinery for the plastics industry. We have the offered machines in stock and can carry out tests on them on your material. The new, efficient mills of the RG-36E - (EKO) series with a very good price/quality ratio are mainly used for grinding various types of soft and hard material. The optional system of receiving the milling based on a blower and separating cyclone, provides comfortable and safe operation for the operator. The mills in this series are characterized by their compact, compact design and ease of operation. Each RG type mill is additionally equipped with a flywheel and belt drive. The knives can be repeatedly sharpened and adjusted against each other as they wear. Motor overload protection and safe control voltage as standard. Rotor diameter (mm): 480 Rotor width (mm): 800 Bwjdordgkcopfx Abzew Power (kW): 22 kw Knives on rotor (pcs): 6 Fixed knives (pcs): 4 Weight (kg): 1245 P&F Wartacz was founded in 1990 and now we are the oldest trading company in the PTSz industry continuously selling injection molding machines, mills, crushers, coolers, conveyor belts peripheral equipment and spare parts. Possible purchase with extraction and cyclone instead of drawer Unused machine available from stock, possible tests before purchase. (dozens of machines in stock)

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor Bwedpfx Abjfh R Tyozsw 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Bodpfsg S Ui Asx Abzeww

Condition: new, Good brand new No. 1 available for immediate delivery! Warranty " CE " Made in Italy Cutting capacity : 0° = round tube mm 230 - square mm 220 - rectangle mm 170 x 300 45° = round tube mm 200 - square mm 180 - rectangle mm 180 x 230 60° = tubular round mm 130 - square mm 120 - rectangle mm 110 x 130 TECHNICAL DATA AND STANDARD EQUIPMENT: Vertical rotation on pivot with adjustable conical bearings without backlash. Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Vice with rapid locking device Bwedpfx Ajfibfgsbzew Safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size Low voltage system 24 V 0.06 kW electric pump for belt cooling The basic characteristics of the machine (rigidity of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied in order to avoid belt yielding, increase its life, improve linearity and cutting time.