Used Fng 40 Cnc for sale (28,842)

Condition: new, For sale is a NEW, unused KSB ETABLOC GN 40-125/402 G10 centrifugal pump with the original KSB electric motor. This is a stock item – the pump has never been used or operated. Due to long-term storage, there may be only minor signs of storage or transport. The pump is in very good, practically factory-new condition. The original KSB packaging, as shown in the pictures, is also available. Pump technical data: Manufacturer: KSB Model: ETABLOC GN 40-125/402 G10 Flow rate Q: 31.00 m³/h Head H: 25.45 m Rotational speed: 2950 rpm Year of manufacture: 2012 Ksdpfx Aszvyinsdlodt Mat.-No.: 01216137 Number: 9972270914 000100 01 CE marking Motor data: Manufacturer: KSB Power: 4.0 kW Voltage: 400 V Δ / 690 V Y Frequency: 50 Hz Speed: 2950 rpm Rated current: 7.8 A at 400 V Efficiency: 85.8% cos φ: 0.86 Protection class: IP55 Insulation class: 155 (F) Efficiency class: IE2 Design: IMV1 Made in Czech Republic Condition: NEW / UNUSED / STOCK ITEM The pump has never been used or operated. Any minor visual marks are solely due to storage and transport. The set being sold is exactly as shown in the pictures.

Condition: new, For sale: a NEW, unused KSB ETABLOC-G 40-160/552.2 centrifugal pump with a 5.5 kW electric motor. The pump comes from warehouse stock. It is new and unused. The set includes the original KSB carton and operating manual. Pump technical data: Manufacturer: KSB Model: ETABLOC-G 40-160/552.2 Ident-No.: 48862664 Flow rate Q: 7.5–63 m³/h Head H: 35.8–24 m Pump speed: 2900 rpm Design: G11 Motor: Power: 5.5 kW Power supply: 3-phase Frequency: 50 Hz Voltage: 380–420 / 660–725 V Kdjdjzvrcmspfx Adlst Speed: 2880 rpm Protection class: IP55 Insulation class: F Condition: NEW / UNUSED – warehouse stock. The pump is in its original KSB packaging. The operating manual is included. The item for sale is exactly the one shown in the pictures.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine EPS cutting machine with 4 independent moving axes and variable machine table. Ksdpfxswfdm Ee Adledt

Condition: good (used), Horizon ED-40 Standing Delivery Unit Manufactured by Horizon, Japan. Can be connected to any Horizon folding machine, but also works with Heidelberg, Herzog Heymann, MBO, etc. The device also operates independently of the folding machine. Infinitely variable delivery speed adjustment. Height adjustment. Package counter with shifter. Format: min 20mm max 110mm Kdodpszurzaefx Adljt

Condition: used, functionality: fully functional, Oil mist extraction for CNC machines, Agfa / ABSOLENT separator filter Fan power: 0.63 kW Inlet diameter: 160 mm Capacity up to 500 m3/h New main filter cartridge Kjdpfxezva Tme Adledt The Agfa / Absolent filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, resulting in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency. Thanks to its design, the filter can operate continuously and without interruption. The liquid collects at the bottom of the filter and can be reused.

Condition: new, For sale: a new, unused submersible pump for coolants, brand Speck, model TM-401-110.0005. The pump is designed for cooling systems, machine tools, and other industrial applications. Technical data: Manufacturer: Speck Model: TM-401-110.0005 ID number: 34206 Serial number: 1002283768 Year of manufacture: 10/2021 Power: 0.5 kW Maximum flow rate: 40 l/min Maximum head: 38 m Power supply: three-phase Frequency: 50 Hz Kjdpfx Ajzvh Aiedlsdt Voltage 380 V: 1.35 A, 2820 rpm, cos φ 0.73 Voltage 415 V: 1.55 A, 2850 rpm, cos φ 0.61 Protection rating: IP54 Insulation class: F (155)

Condition: excellent (used), For sale: industrial centrifugal pump KSB ETABLOC-GN 40-125/402 with a 4 kW electric motor. Pump specifications: Kodpfxszvbgbe Adlsdt • Manufacturer: KSB • Model: ETABLOC-GN 40-125/402 • Design: GN11 • Identification number: 48861800 • Pump number: 5-925-204029/1 • Flow rate: 31–59 m³/h • Head: 25–17.5 m • Pump speed: 2900 rpm Motor specifications at 50 Hz: • Motor type: QU FA 112M2A-60 • Motor number: 243866 HU • Power: 4 kW • Power supply: three-phase • Frequency: 50 Hz • Speed: 2850 rpm • cos φ: 0.91 • Protection class: IP55 • Insulation class: F • Operating mode: S1 Condition: used.

Condition: excellent (used), For sale: an industrial KSB ETABLOC GN 40-160/402 centrifugal pump with a 4.6 kW electric motor. Pump specifications: • Manufacturer: KSB • Model: ETABLOC GN 40-160/402 • Design: GN11 • Pump serial number: 4-925-237868/1 • Flow rate: 7.5–32.5 m³/h • Head: 35.8–32.5 m • Pump speed: 2900 rpm • Year of manufacture: 2000 Kdsdszva Azspfx Adljt Motor specifications: • Motor type: QU FA 112M2A-60 • Motor serial number: 146249 RU • Power: 4.6 kW • Power supply: three-phase • Frequency: 50 Hz • Voltage: 380–420/660–725 V • Current: 7.8–7.6/4.5–4.4 A • Speed: 2850 rpm • cos φ: 0.91 • Protection class: IP55 • Insulation class: F • Operating mode: S1 • Pump weight: 57 The pump is used and is in the condition shown in the pictures. Normal signs of use and storage are visible.

Condition: reconditioned (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2500 mm Feed motor 4 kW Feed speed 5-30 m/min. control Memory-Funktion Weinig Powermat 400 with HSK/Powerlock, axial/radial CNC controlled ----- The machine renovated and functionally checked ! Kedpfxjuzaa Se Adljdt Short summary: ----- 6 spindles with 8,000 rpm 5 x HSK/Powerlock Axial and radial CNC adjustment of the spindles via control CNC - controlled adjustment and positioning of the feed Detailed description: ----- Technical specifications: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 6 1. Tool holder - below ----- Motor with brake: 5.5 kW Spindle diameter: 40mm Speed: 6,000 rpm Tool flight circle: 93 - 160 mm Axial adjustment range: 5 mm Rebating device MarathonCoatin for table insert in front of 1st lower tool holder 2. Tool holder - PowerLock - right ----- Motor with brake: 11.0 kW Common motor with left tool holder Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max. tool diameter behind stop level: 180 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 3. Tool holder - PowerLock - left ----- Motor with brake: Common motor with the 2nd spindle Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle 40 mm below table level: 93 - 200 mm Tool flight circle 55 mm below table level: 93 - 180 mm Tool cutting circle for straight cutter heads max. 163 mm Max throat depth: 35 mm Axial adjustment range: 55 mm Spindle axially and radially CNC controlled 4. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max.: 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Radial CNC-controlled spindle 5. Tool holder - PowerLock - above ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Tool cutting circle for straight cutter heads max. : 180 mm Max throat depth: 35 mm Axial adjustment range: 40 mm Divided pressure shoe in front of the upper tool holder, on tool flight circle adjustable and pivoting away from the tool, spring-loaded. Spindle axially and radially CNC controlled 6. Tool holder - PowerLock - below ----- Motor with brake: 7.5 kW Speed ??including high-performance ball bearing: 8,000 rpm Tool flight circle: 93 - 200 mm Max throat depth: 15 mm Axial adjustment range: 35 mm Radial CNC-controlled spindle feed system -----...

Condition: used, Year of construction: 2015, functionality: fully functional, type of input current: three-phase, tank capacity: 200 l, input current: 70 A, input frequency: 50 Hz, power: 70 kW (95.17 HP), INDUCTOR IH-40-HNK 40 kW Induction Aluminium Melting / Holding Furnace For sale is an INDUCTOR IH-40-HNK industrial induction melting and holding furnace manufactured in 2015. The system features a modern medium-frequency induction power supply with water-cooled induction coil and insulated stainless-steel melting vessel. The induction coil is mounted underneath the crucible, providing efficient and uniform bottom heating. The furnace is suitable for melting and holding aluminium and aluminium alloys in foundry and industrial production environments. Technical Specifications Manufacturer: INDUCTOR Ltd. Model: IH-40-HNK Year of manufacture: 2015 Power: 40 kW Supply voltage: 3 × 400 V / 50 Hz Rated current: 70 A Water-cooled induction system Insulated stainless-steel melting vessel Approximate vessel capacity: 200 litres Medium-frequency IGBT inverter technology PLC / HMI control system Control cabinet weight: 190 kg Kdodpfx Aozy N Ihodlst Applications Aluminium melting Aluminium holding Foundry operations Metal processing Casting lines The machine is offered complete with the control cabinet and induction power supply.

Condition: good (used), Screw bookbinding press 40×30 with base The machine is fully operational and ready for operation. Format: 400×300 mm Pressure: 3 tons Made in Germany. Kdodpfozt H Uxex Adlet

Condition: good (used), Heidelberg Cylinder KSB 40×57 Hot Stamping Machine A very rare model on the market. Kdedpfx Adeztz D Ujljt The machine is ready for operation and in very good condition. After inspection. Factory-installed new hot stamping unit. Suitable for die-cutting. Central lubrication. Format 40x57cm Weight 3500kg 380V power supply Includes additional components, fillers, and letterpress locks.

Year of construction: 2016, condition: used, functionality: fully functional, machine/vehicle number: MACH1097, For sale is a reliable and precise grinding machine from the leading French manufacturer, Forézienne (MFLS), designed for the automated and high-quality sharpening and profile restoration of band saw blades. Thanks to its precise CNC control, the machine ensures uniform geometry of the saw teeth, extends the service life of the cutting tools, and significantly reduces setup time. The machine is ready for industrial use, well-maintained, and suitable for both sharpening centers and the woodworking industry. Ksdpfx Adszxpkmsledt

Condition: good (used), Heidelberg Cylinder KSB 40×57 Automatic die-cutter Ksdpfx Aeztn Iysdlsdt A very rare model on the market. The machine is ready to work, in very good technical condition. After inspection. Suitable for die-cutting. Central lubrication. Format 40×57 cm Weight 3500 kg Power supply 380 V Includes two drawers of additional elements, frame, sheet metal for the cylinder, fillers and typographic locks.

Condition: refurbished (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 1276, CNC Hot Radial Forging GFM SX-13 New in 1974 / 2022 New control system PLC SIEMENS S7 Machine number: 1276 No. of Hammers: 4 Forging force each hummer: 160 Ton Hammer stroke / min: 700/min Hammer lenght: 240 mm Diameter setting range: 80 mm Maximum forging diameter: Structural steel, round-cross section: Ø 130 mm square cross section: Ø 115 mm Smallest dimensions forged: Ø 25 mm Manipulator A max. displacement: 6820 mm Manipulator B max. displacement: 7150 mm Ksdpfx Aoq U R T Nodlodt Maximum workpiece length: 6000 mm Rapid speed manipulator: 400mm/sec Total connected power: 300 kW 380 V, 50 Hz Machine dimensions: Forging height over floor: 615 mm Total height pf the machinr over floor: 1665 mm Total machine lenght: 32670 mm Total foundation lenght: 33400 mm Tot. machine width (without auxliary equipments): approx 3885 mm Total foundation width: 16000 mm Total weight of the machine: 84.000 Kg

Year of construction: 1974, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 1293, CNC Radial Forging Machine GFM mod. SX-16 Manufacture: GFM (Austria) YOM: 1974 / 2022 Model: SXL-16 Machine number: 1293 PLC: Siemens S7 - Technology V4.2 with CNC Bosch Rexroth XM Numbers of Hammers: 4 Forging force: 800 Ton (200 t per Hammer) Strokes per minute: 580 Hammer length: 320 mm Maximum hammer setting scope - calculated by diameter: 100 mm Maximum diameter of forging regarding: - structural steel: circular cross section – Ø 160 mm square cross section – 130 mm - high alloy steel: circular cross section – Ø 120 mm square cross section – 100 mm Extreme quadrangle: 12 x 120 mm Maximum length of forging: 6000 mm Min and Max diameter of mounting in manipulator: 30 - 160 mm Feed of manipulator A: 6800 mm Feed of manipulator B: 7200 mm Passage through manipulator: Ø 130 mm Kdedsq U Sa Sepfx Adlot Manipulators speed in fast move: 400 mm/s Feed speed of manipulators (stepless adjustment): 10 ÷ 115 mm/s Cooling water pressure: 3 ÷ 5 bar Temperature of inlet water: max. 30˚C Cooling water consumption: 34m3/h Pipe diameter for cooling water: 2” Compressed air pressure: min. 5 bar Pipe diameter for compressed air: Ø20 mm Consumption of compressed air: 1,5 Nm3/h Power supply (nominal power): 350 kW Motor voltage: 500 V Control voltage 220 V Power of main engine: 200 kW Power of pump motors: 185 kW Power of manipulators motors: 2 x 22 kW Dimensions of the machine Axis height of forging above the hall level: 750 mm Maximum height of machine above the hall level: 2.050 mm Maximum length of machine on the hall level: 33.740 mm Foundation length: 34.200 mm Maximum width of machine on hall level without loading equipment: 4350mm Foundation width: 15.600mm Machine net weight: 124.490 kg

Condition: refurbished (used), functionality: fully functional, Cold Radial Forging Machine GFM SX-10 YOM: 1971/2024 CNC: Siemens SINUMERIK ONE with PLC 1500 Kdodpfjq U R Rusx Adlot Forging Box Number of forging hammers 4 Max. forging force per hammer 1250 kN Number of strokes 1200 1/min Hammer lenght 135 mm Diameter setting range 60 mm Forge eccentric 3,5 mm Chuck head Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Workpiece rotation 35-71 1/min Workpiece lenght max. 900 mm Counter holder Clamping force max. 50 kN Advance speed max. 20000 mm/min Stroke 1290 mm Mandrel Clamping force max. 20 kN Advance speed max. 18000 mm/min Stroke 800 mm Dimensions Lenght approx: 9100 mm Width (with electrical cabinets and control panel) approx.: 4500 mm Height forging machine approx.: 2150 mm Forging height above floor: 1250 mm Weight (forging machine) approx.: 29000 kg The machine is completely revamped with a new Electrics, Hydraulics, new Control and with functionality test before delivery.

Condition: used, Your contacts at our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank Technical data for the wide-span shelving crossbeam: Manufacturer: Nimar Type: MI 50 The scope of supply includes: 1x Wide-span shelving crossbeam, used Material color: gray Crossbeam type: MI 50 Box profile: 60 x 40 mm Kdodpfx Adjdh Ublslst Clear width: 2,000 mm 2x Locking pins, used Design: fully galvanized For securing the longitudinal beams against unintentional lifting out Our services at a glance: (Prices upon request) - Assembly Our general assembly conditions apply - Shelf inspection Shelf inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all shelving systems - Delivery with our own fleet (without unloading)

Condition: good (used), Technical data for the pallet rack beam: Racking system: SSI Schäfer Type: PR 600 Included in the scope of delivery: 01x pallet rack beam, used Material color: yellow Box profile: 60 x 40 mm Beam type: TRV1-270-064-30 CE Clear span: 2,700 mm Bracket: 5 HK (hooks) 02x safety pins, used Design: fully galvanized For securing the cross beams against accidental lifting Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Kdedsynlraopfx Adljt General information about the item: This item is only offered for collection. If transport or shipping is desired, additional costs will apply. These can be requested from us separately depending on the delivery location and scope of delivery.

Condition: excellent (used), Your contacts within our company: Mr. Andre Evering Mr. Marcel Brahms Mr. Simon Blank We are offering you a used pallet racking crossbeam from the manufacturer Nedcon for sale. Technical data for the pallet racking crossbeam: Racking system: Nedcon Type: NS Currently available: approx. 5,000 pieces The scope of delivery includes: 01x Pallet racking crossbeams, used Material color: RAL 2008 Light Red-Orange Box profile: 90 x 40 mm Hook type: 4 hooks Clear width: 1,900 mm Max. load per pair of crossbeams: 2,000 kg, with evenly distributed load 02x Locking pins, used Design: fully galvanized For securing the longitudinal supports against accidental lifting out Our services at a glance: (Prices on request) Assembly, installation Our general assembly conditions apply Racking inspection Racking inspection according to DIN EN 15635, carried out according to the requirements of BGR 234, visual inspection for all racking systems Kdedpfjd A Sm Tsx Adlot Delivery with our own fleet (without unloading)

Condition: excellent (used), Technical data for the locking bracket: Manufacturer: SSI Schäfer Scope of delivery includes: 01x Locking bracket, used Material color: Sendzimir galvanized Leg "A": approx. 35 mm Leg "B": approx. 53 mm (support surface, see description) Incl. spacer block (grey) Internal dimension "C": approx. 22 mm Material thickness: approx. 2.00 mm Weight per piece: approx. 0.120 kg Note: Thanks to the included spacer block, the Z-bracket can be used for various beam widths from 40 to 60 mm! Quick overview / Application area: - Without block for beam width 60 mm (e.g., for INP) - With block (small side inside) for beam width: 50 mm (INP or box profile) - With block (large side inside) for beam width: 40 mm (INP or box profile) Ksdpepgndgjfx Adljdt General information about the item: This item is available for pickup only. Additional shipping or transport services are subject to extra charges, which can be provided upon request depending on the delivery location and quantity.

Condition: good (used), Technical data for the pallet racking traverse: Racking system: Jung Heinrich Type: Esmena The scope of delivery includes: 01x pallet racking beam, used Material color: yellow Box profile: 115 x 40 mm Agraffe: 4 hooks Clear width: 1,100 mm 02x locking pins, used Version: completely galvanized For securing the side rails against unintentional lifting out Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Kdodpfx Aetp Tb Tsdlot Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Scope of delivery includes: 01x CS profile, used Material color: Sendzimir galvanized Total length: 5,550 mm Profile dimensions: CS 250 x 50 x 40 mm Weight per piece: approx. 45.00 kg Kdodjx R Ambspfx Adlst Material thickness: approx. 2.5 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Should you require transport or shipping, additional costs will apply. These can be quoted separately depending on the delivery location and scope of supply.

Condition: excellent (used), Cnc rotary table, Nikken 5AX-230 4 and 5 axis for Mazak etc. was mounted on a VTC 300, due to new machine 5 axis now for sale, Ksdpfx Adsp U Umkelodt

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 11/2022, total length: 2,750 mm, total width: 1,650 mm, total height: 1,800 mm, overall weight: 750 kg, Equipment: documentation/manual, Automatic CNC machine for UV screen printing – SD2-C4-UV (2022) MACHINE OFFERED: The SD2-C4-UV is an automatic, four-color CNC machine designed for screen printing. The machine performs multi-color printing on flat and three-dimensional (round) products, using UV and IR-cured inks in a single production cycle. The machine allows printing on three-dimensional objects in up to six colors, combining UV and IR technologies. It is intended for printing components made of non-flammable materials and plastics, provided that the temperature of the surfaces of the printed components is controlled. We offer for sale a fully functional, automatic CNC machine for UV screen printing, model SD2-C4-UV, manufactured in 2022 (serial no. 11/2022). The machine operates reliably; the sale is due to a change in the production profile. BASIC DATA • Model: SD2-C4-UV • Serial number: 11/2022 • Year of manufacture: 2022 • Condition: used, technically sound • Cycle counter: 381,124 • Documentation: complete operating manual (120 pages) TECHNICAL PARAMETERS • Power supply: 3 × 400 VAC / 50 Hz / max. power 10 kW • Dimensions: 2750 × 1650 × 1800 mm; weight ~750 kg • Operating pressure: 6.0 bar (max. 7.0 bar) • Printing of round objects: diameter 10–150 mm, height up to 250 mm • Printing of flat objects: up to 250 × 100 × 100 mm • Max. printing area: 310 × 180 mm (1 color) • Operation: 1 operator MAIN ADVANTAGES • 4-color UV and IR screen printing in a single cycle (up to 6 colors) Kdedszwdv Uopfx Adljt • 9 CNC servo drives – full automation of movement • Printing on round (diameter 10–150 mm) and flat objects • Vision system (camera + monitor) for precise screen alignment • Remote service via the Internet; software update • PLC controller with a touch HMI, menu in Polish • Complete safety systems according to CE standards (opto-electronic barriers, foot pedal) • UV reactor with a 200 mm lamp / ~250 W/cm