Used Fng 40 Cnc for sale (28,503)

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 1,600 mm, feed length W-axis: 900 mm, workpiece weight (max.): 12,000 kg, overall weight: 30,000 kg, year of last overhaul: 2020, For Sale – Used CNC Horizontal Boring Machine UNION BFKR 150 CNC Control: HEIDENHAIN TNC 530 CNC Retrofit: The machine was retrofitted with CNC control in 2020. Technical Specifications: X-axis travel: 3,000 mm Y-axis travel: 1,600 mm Tedpfx Ao Afm Uyoirjd Z-axis travel: 1,600 mm W-axis travel: 900 mm (spindle travel) Spindle diameter: Ø 150 mm B-axis: 360° – CNC-controlled rotary table Table dimensions: 1,600 × 2,000 mm Machine Condition: The machine is currently still connected to the power supply and is available for inspection and a test run. The machine underwent a mechanical overhaul approximately three years ago, including the replacement of bearings and other components. The machine has been out of operation for approximately six months.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: 28668, operating speed: 12 mm/s, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, pressing force: 220 t, table length: 4,000 mm, type of input current: three-phase, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, Control:Touch-B Axes:Y,X,R,Z1,Z2,XZ,W and EFL Clamping:wila hydraulic clamping Machine weight: approx. 21000 kg Todpfx Aezn Arpsirod Type: PPEB 220/40 EFL Serial number: 28668 Without tools New R axe spindles New belts : Z axes and tilting Machine front side repainted. New venillators inside the heat exchanger. Wila clamping system checked and realigned,two middle segment changed to new ones.

Condition: ready for operation (used), Year of construction: 2000, spindle speed (max.): 3,500 rpm, travel distance X-axis: 275 mm, travel distance Z-axis: 820 mm, spindle motor power: 22,000 W, total height: 2,330 mm, total width: 2,230 mm, overall weight: 7,500 kg, controller manufacturer: FANUC, controller model: Series 21i-T, product length (max.): 4,950 mm, number of slots in tool magazine: 12, number of axes: 2, Horizontal turning machine manufactured in 2000. This ZPS S-60 CNC features a maximum machining diameter of 430 mm and a maximum machining length of 750 mm. It offers X/Z-axis travel of 275/820 mm and a spindle speed range of 20 to 3,500 rpm. If you are looking to get high-quality turning capabilities, consider the ZPS S-60 CNC machine we have for sale. Contact us for further details. • Maximum swing over bed: 680 mm • Maximum machining diameter: 430 mm • Maximum machining length: 750 mm • Maximum bar capacity: 65 mm • Spindle bore: 80 mm • Turret: Duplomatic, 12 positions • Dimensions (L × W × H) excluding chip conveyor: 3,280 × 2,230 × 2,330 mm • Service/maintenance: Regularly serviced and maintained Additional equipment • Tool holders • Clamping jaws Tsdpfx Aie Afm Utsred • Other accessories (unspecified) Technical Specification Taper Size VDI 50 Counter Spindle No Driven Tools No

Condition: used, EMMEGI PHANTOMATIC M4L 4-axis CNC machining centre, manufactured in 2022, designed for machining aluminium, PVC and light alloy profiles. The machine is equipped with a high-speed electrospindle featuring an HSK-F50 tool holder, automatic A-axis rotation and a double tool magazine, making it ideal for milling, drilling, slotting, end milling and machining operations on multiple sides of the profile. MACHINE DETAILS Manufacturer: EMMEGI S.p.A. – Italy Model: PHANTOMATIC M4L Year of manufacture: 2022 Machine type: 4-axis CNC machining centre Certification: CE with original Declaration of Conformity TECHNICAL SPECIFICATIONS Axis Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 274 mm Z-axis (vertical): 390 mm A-axis: automatic rotation from 0° to 180° Positioning Speeds X-axis: 56 m/min Y-axis: 22 m/min Z-axis: 22 m/min X/Y/Z axis acceleration: 3.3 m/s² Electrospindle Power: 4 kW (S1 continuous duty) Maximum speed: 20,000 rpm Tool holder interface: HSK-F50 Liquid cooling system Automatic A-axis rotation: 0°–180° A-axis rotation speed: 6,600°/min Machining Capacity X-axis longitudinal travel: 3,000 mm Todpfxj Afnl Te Airsd Usable working length with tool magazine: up to 2,815 mm, depending on configuration Extended-length machining capability: up to 5,630 mm, depending on machine configuration and operating conditions Multi-side profile machining capability MAIN FEATURES AND EQUIPMENT Double tool magazine Electrospindle with HSK-F50 tool holder interface CNC control system with operator monitor and keyboard Automatic A-axis rotation Pneumatic clamps for profile positioning and securing Fully enclosed safety guarding Pneumatic clamping system Technical documentation and operating manual Original CE Declaration of Conformity APPROXIMATE OVERALL DIMENSIONS Length: 3,707 mm Depth: 2,139 mm Height: 2,482 mm AVAILABILITY MACHINE AVAILABLE FROM JANUARY 2027

Condition: used, Year of construction: 2023, functionality: fully functional, machine/vehicle number: AB00029039, feed length X-axis: 3,050 mm, feed length Y-axis: 900 mm, feed length Z-axis: 60 mm, input frequency: 50 Hz, input current: 31 A, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 10 m/min, working width: 900 mm, total width: 2,159 mm, total length: 3,459 mm, total height: 1,500 mm, SCM Startech CN Plus R F23L CNC drilling, grooving and routing centre, manufactured in Italy in 2023. The machine is currently installed in Pejë, Kosovo, and can be inspected under power by prior appointment. Machine identification: Tsdpfe Afnhhsx Airsd - Manufacturer: SCM - Model: Startech CN Plus R F23L - Year of manufacture: 2023 - Serial number: AB00029039 - CE version - Machine weight: 1,383 kg Main equipment: - F23L drilling head - 13 independent vertical drilling spindles: 7 in X and 6 in Y - 10 horizontal drilling spindles: 6 in X and 4 in Y - Drilling motor power: 2.2 kW - Drilling spindle speed: 4,200 rpm - 5.5 kW vertical electrospindle for routing operations - Electrospindle speed: 1,000–18,000 rpm - ER32 collet with manual tool change - Maximum routing tool diameter: 20 mm - Integrated grooving saw in the X direction - Maximum saw blade diameter: 125 mm - Saw blade speed: 5,500 rpm - Automatic workpiece positioning and side alignment - Centralised lubrication system - SCM Maestro CNC software with Hicam machine interface - PC control with 19-inch display - Barcode program support - Uninterruptible power supply unit (UPS) - Additional Maestro CNC hardware key Working capacity: - Maximum panel dimensions: 3,050 × 900 × 60 mm - Minimum panel dimensions: 200 × 80 × 10 mm - Maximum axis speed X/Y/Z: 40/40/10 m/min - Maximum vertical drilling depth: 30 mm Installation data: - Electrical supply: 400 V, 3+N, 50 Hz - Input current: 31 A - Installed power: 20.7 kVA - Compressed-air consumption: 50 Nl/min The machine is used, fully functional and available for demonstration under power. Availability: by arrangement. Sale basis: EXW Pejë, Kosovo. Dismantling, loading and transport can be arranged separately. Further technical information, documentation and an operating video are available on request.

Condition: good (used), Year of construction: 2012, turning diameter 400 mm turning length 650 mm Tjdpfx Aj Afp D Rjirsd control Siemens 840D SL x-travel 275 mm z-travel 700 mm spindle turning speed range 4000 U/min spindle bore 65 mm turret (x-stations) 16 Pcs. VDI30 tailstock quill taper MT 4 swing dia. 600 mm Tools speed 5000 U/min total power requirement 37 kW weight of the machine ca. 5,5 t dimensions of the machine ca. LBH 2,5 x 1,6 x2,0 m - C-axis - 3 driven tools - 4-jaw chuck (Röhm, 250 mm) - Renishaw measuring arm - Chip conveyor - Interface for bar loader - Siemens ShopTurn - Documentation

Condition: good (used), Year of construction: 1998, Good working condition. Parts shown by hand not come. Technical data are shown on picture. Retrofit on control unit 2016. Siemens 840 SL. Tedpfe Aaz Rxsx Airsd

Condition: ready for operation (used), Year of construction: 1996, spindle speed (max.): 6,000 rpm, number of axes: 2, Multi-spindle drilling machine manufactured in 1996. This PREISS U HORTSTMANN BAT-III-CNC features a maximum workpiece length of 2,200 mm and a maximum workpiece width of 600 mm. It offers an impressive X-axis positioning speed of 60 m/min and a drilling spindle speed of 6,000 rpm. If you are looking to get high-quality drilling capabilities, consider the PREISS U HORTSTMANN BAT-III-CNC machine we have for sale. Contact us for further details. • Workpiece capacity: • Minimum workpiece length: 100 mm • Maximum workpiece length: 2,200 mm • Minimum workpiece width: 100 mm • Maximum workpiece width: 600 mm • Minimum workpiece thickness: 16 mm • Maximum workpiece thickness: 35 mm • CNC control and performance: • X-axis positioning speed: 60 m/min • Y-axis positioning speed: 50 m/min • Positioning resolution: 0.05 mm • Drilling and insertion cycle: approx. 5 s • Additional drilling cycle: approx. 2 s • Drilling spindle speed: 6,000 rpm • CNC display: 12-inch monitor • Program memory: 250 subprograms Tsdpfx Aij Afxw Sjrsd • PC interface: RS232

Condition: used, Year of construction: 2013, operating hours: 33,559 h, spindle speed (max.): 7,000 rpm, overall weight: 9,800 kg, CNC Lathe Manufacturer: DMG MORI Type: SPRINT 50 3T+B Year of manufacture: 2013 Technical details: Spindle speed: 7,000 rpm Number of tool stations: 3 x 12 Machine weight: approx. 9.8 t Spindle hours: approx. 48,437 h Operating hours: approx. 33,559 h Condition: used Available from December 2026 Technical features & accessories: - 2 cross slides - 3 turrets with 12 stations each (all driven) - Main and counter-spindle - 2 C-axes - Y-axis on slides 1 and 2 - Chip conveyor - Workpiece unloading system - Differential pressure clamping system for counter-spindle - Z-Y axis for slide 5 - Emulsion cooling system - Conveyor belt for finished workpieces (external to the machine) Todpfx Ao Advfroired - Electrical and software interface for oil mist extraction system - B-axis Accessories, tools, and clamping devices shown are included in the scope of delivery only if explicitly stated in the additional information. Subject to changes and errors in the technical data and specifications; prior sale reserved!

Condition: new, pressure 175 t chamfer lenght 3100 mm distance between columns 2600 mm work stroke 265 mm dayligth 480 mm column arm 410 mm ram stroke speed 160 mm/sec work speed 10.0 mm/sec return speed 120 mm/sec table height 900 mm table width 90.0 mm oil volume 230 ltr. voltage 400 Volt total power requirement 18.5 kW weight 10500 kg range L-W-H 4100 x 2000 x 2820 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 Tedpfxoxaa Eqe Airsd ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model "DA-58T" with graphics/touchscreen * 2D graphical programming * 15" high-resolution color TFT screen * Bending sequence calculation * Product programming and real-size display * USB interface - CNC controlled axes: Y1 - Y2 - X - R - crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 500-600 mm/s * with 2x manually adjustable backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 200 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FMSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: new, pressure 220 t chamfer lenght 4100 mm distance between columns 3600 mm work stroke 265 mm dayligth 480 mm column arm 410 mm ram stroke speed 150 mm/sec work speed 10.0 mm/sec return speed 140 mm/sec table height 900 mm table width 110 mm oil volume 300 ltr. voltage 400 Volt total power requirement 18.5 kW weight 15000 kg range L-W-H 5000 x 2400 x 2850 mm ALPMAC Manufacturer Video: ?v=_FxXyPAcxlE ?v=YfkX9RwWv_0 ALPMAC Product Video Model B: ?v=lmT1tfy43WE ----- MODEL SERIES B175-3100 - CNC electro-hydraulic press brake with: * increased installation height * increased cylinder stroke * increased throat depth ----- ! MADE FROM CERTIFIED QUALITY STEEL (ST 37-42-52) ! HIGH-PERFORMANCE HYDRAULIC COMPONENTS (HAWE GERMANY) ! HIGH RUNNING QUIET DUE TO LOWER OPERATING PRESSURE (50-60 dB) ! INDUCTION-HARDENED & CHROME-PLATED CYLINDER PISTONS FOR CONTINUOUS USE ! ALUMINUM CAST REAR STOP COMPONENTS ! REAR STOP WITH POWERFUL DRIVE MOTOR (1.0 kW) ! MACHINE TABLE MADE OF ROBUST & DURABLE STEEL (C45) GREEN ECO Technology: Lower consumption. More quiet. Full control. ! Peak performance with minimal energy consumption ! Maximum power at minimal cost ! Maximum performance when it's really needed ! Main motor is only activated by the foot pedal ! No energy wasted in standby mode ! Controlled start-up process Equipment: - CNC electro-hydraulic press brake - DELEM CNC control model DA-66T- graphics/touchscreen * 2D graphic touchscreen programming operation * 3D display in simulation and production * 17" high-resolution color TFT screen * Bending sequence calculation * Product programming and display in actual size * USB interface Tjdpfx Ajynnk Eeired - CNC controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - CNC electro-motorized backgauge (X-axis) * on ball screws * Travel: max. 750 mm * X-axis travel speed: 500-600 mm/s * with 2x CNC-controlled backgauge fingers - CNC electro-motorized height adjustment (R-axis) * Travel: max. 250 mm * R-axis travel speed: 200 mm/s - CNC electro-motorized table crowning - ROLLERI Rehfuß upper tool "PS 135.85-R08", System "A" * including quick-change clamping * including crowning device in the tool holder - ROLLERI split universal die block "M 460 R" * including 1x die shoe "C 1050-R" - Rear safety device: light barrier - HAWE hydraulic components - FIESSLER AKAS laser safety device in front of the machine (incl. FMSC) - 2x front support arms with sliding system * easily and keylessly height-adjustable - FIESSLER freely movable double foot control - CE marking / Declaration of Conformity

Condition: new, sheet width 3050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 16 Stück no. of strokes 10 - 19 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm table height 830 mm oil volume 140 ltr. weight of the machine ca. 7.800 kg Tsdpfs Afzuzex Airod range L-W-H 4150 x 2250 x 1900 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Mounted on recirculating ball screws * Automatically retracts/swings up at maximum travel . to accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Image shows an identical machine model

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm Tjdpfx Aoydqpisirsd dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader. Machine comes with 3 jaw chuck, tool set arm, chip conveyor and single piece extraction.

Condition: used, Year of construction: 2018, Delivery time approx. 5 months. Machine from educational use – TOP condition, low hours (edging unit unused). No tools included. Dismantling, delivery, assembly, commissioning, and training not included in the price. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding made for you: The CNC machining center is equipped with a comprehensive selection of edge banding tools to meet any woodworking requirement. MAIN ADVANTAGES · High performance with the advanced H80C edge banding unit, 8,000 rpm drilling spindles. The most robust spindle technology on the market, offering over 1,000 maintenance-free operating hours. · Better equipped: Suction cups can be disabled and configured via the FLEX worktable to optimally adapt the machine to requirements. · Easier, more intuitive programming thanks to the integrated CAD-CAM module for edge banding technologies “MAESTRO EDGE”. · Easier operation: The lowered frame ensures the worktable is always accessible. The control cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are needed. Base structure: The base frame is a monolithic construction made from thick-walled steel, reinforced across the entire machine bed with welded square plates for exceptional rigidity. The bed’s shape, with a wide base, is the secret to lasting precision and stability. The load-bearing structure consists of a particularly robust, monolithic steel base, heavily ribbed and highly stiffened; the extra-wide support was specially designed to give the machine maximum stability, ensuring lasting precision regardless of operating conditions—with no need for floor anchoring. The base provides a large, solid support for the moving gantry: the working unit is thus equipped with a balanced, stable, and resilient support capable of handling the highest loads, ensuring top-quality performance and greater accuracy. The moving gantry is made from a robust single piece anchored to the base, sliding along top-quality prismatic guides with recirculating ball carriages. The working unit is attached and moves along the Y and Z axes on prismatic guides with recirculating ball carriages. Movement of the lower carriage (X-axis) and the working unit along the moving carriage (Y-axis) is enabled by rack-and-pinion transmission with helical teeth. This design results in greater tooth-on-tooth engagement, delivering higher acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures reduced wear on mechanical components and quieter operation. Tjdpfxozvhlke Airjd The vertical Z-axis is driven by a ball screw, ensuring perfect balance with dynamic loads and smooth acceleration and deceleration. The main milling unit is directly coupled to the Z-axis carriage for maximum finishing quality.

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper --Manufacturer: TAKRAF VEB, Lifting clamp, roller clamp type KR 3 Tedpfjdkbf Hox Airjd -Grasping range: 0 to 40 mm -Load capacity: 3200 kg -Dimensions: 235/200/H595 mm -Number: 2x terminals available -Price: per piece -Transport dimensions: 390/270/H200 mm -Weight: 22 kg/piece

Condition: used, axle configuration: 3 axles, first registration: 11/2023, next inspection (TÜV): 11/2024, Year of construction: 2023, Equipment: ABS, Unblemished, flatbed semi-trailer 6 new tires with rims 40 ft tipper Self-contained tipping unit, powered by the truck’s batteries Lift axle Water tank with soap dispenser Toolbox LED lights Todpfx Aiozfyk Dsrjd Suitable for transporting 40 ft containers We offer the following for rent: 20 ft, 2 or 3-axle trailers 20 ft tipper chassis 40 ft tipper chassis 40 ft chassis with rear extension 45 ft multi-chassis 18 to 26 m³ rear-tipping dump bodies Are you interested? You can request our price list at any time without obligation. We sell tires and rims for trucks and semi-trailers of the following brands: Fulda, Bridgestone, Petlas Sizes: 315 / 55 R 22.5 385 / 55 R 22.5 385 / 65 R 22.5

Condition: excellent (used), Year of construction: 2019, operating hours: 5,277 h, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 508 mm, workpiece weight (max.): 300 kg, table width: 500 mm, table length: 630 mm, overall weight: 8,500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 22,400 W, spindle nose: CT 40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, CNC Machining Centre HAAS UMC 750 SS TECHNICAL CHARACTERISTICS: Year of manufacturing: 2019 Number of simultaneous axes: 5 Stroke X axis: 762 [mm] Stroke Y axis: 508 [mm] Stroke Z axis: 508 [mm] Angular C axis stroke: 360 [°] Table dimensions : Ø630 x 500 [mm] Max. load on table: 300 [Kg] Tedpfxo Afwino Aired B axis swivelling stroke: +110 [°] / 350 [°] Spindle type: CT 40 Max. spindle speed: 15000 [rpm] Spindle power: 22.4 [kW] Tool changer magazin number of stations: 40 Lubrication tank capacity: 284 [l] Number of running hours: 5277 [h] Weight: 8500 [Kg] EQUIPMENT INCLUDED: x1 spindle 15000 [rpm] x1 through-spindle coolant x1 high-pressure coolant pump 21 bar x1 auxiliary coolant filter x1 RENISHAW wireless workpiece probe x1 calibration sphere x1 RENISHAW tool probe x1 HAAS oil mist extractor x1 HAAS remote handwheel x1 HENNIG chip conveyor, type 101435 Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. machine similar to Mikron, Hermle, DMG Mori, Mazak, Hedelius, AXA, Chiron, Matec, Reiden, Lagun, Haas, Alzmetall, as well as milling, drilling and tapping machines, and CNC grinding machines

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 25.0122, For sale is a highly precise CNC turning and milling machine, type Benzinger TNE5, manufactured in 2007. Benzinger machines are known worldwide for their exceptional mechanical rigidity, extreme repeatability, and durability. They are particularly used in the watchmaking industry, medical technology, precision engineering, and optics. This model is ideal for the complete machining of complex precision parts from bar stock or in a chuck. Thanks to its robust design and excellent thermal management, the machine is perfectly suited for tight tolerances and hard turning. Equipment: - Siemens Sinumerik control - 2 x 12-station turret - Knoll 200S-1/200 chip conveyor, year of manufacture 2006 Tede Adz Acspfx Airjd - High-pressure hydraulic unit Terms: - ex works. Attractive offer – flexible & hassle-free We offer you not only a high-quality product but also customized financing options that adapt to your needs. Whether it's a down payment, installment payment, or individual financing models – together we will find the right solution. On request, we also take over the complete transport organization. From planning to reliable delivery, we ensure a smooth and on-time process so that you don't have to worry about anything. 📞 Please contact us for further information or a non-binding offer. We will provide you with personal and expert advice. Subject to prior sale, changes, and errors!

Condition: used, Second-hand 40 mm clamping mandrel for Weinig Rondamat 936, Rondamat 925 and Rondamat 934 grinders, or similar machines fitted with a workpiece holder. Tsdpj Afxlwofx Aired Technical data: - Clamping length: 240 mm - Mandrel ⌀: 40 mm

Condition: used, Year of construction: 2012, 900mm Swing, 650mm max. machining diameter, 2042 mm maximum turning length, 1500rpm spindle, 165mm bar capacity, Tjdpfxj Agkrvs Airod 10 station turret 45kW spindle motor, FANUC Series 32i control, 3 Jaw Power Chuck, Tailstock, Swarf Conveyor, Coolant, Hydraulic steady.

Year of construction: 2026, operating hours: 1,130 h, condition: like new (used), turning diameter: 400 mm, bar passage: 65 mm, spindle nose: HSK-T 63, turning length: 1,100 mm, CNC Turning and Milling Center Manufacturer: DMG MORI Type: CLX 450 TC with Robo2Go Year of manufacture: 2026 Control system: Celos X with Siemens Sinumerik One Technical data: Max. turning diameter: 400 mm Turning length: 1100 mm Bar capacity: max. 65 mm Travel ranges: X-axis travel: 276 mm Z1-axis travel: 755 mm Z3-axis travel: 775 mm Y-axis travel: +/- 100 mm B-axis travel: +/- 120° Main spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Counter-spindle: Speed: 5,000 rpm Drive power: 14/17 kW Max. torque: 275/345 Nm Milling spindle: Speed: 0 – 12,000 rpm Drive power: 8.8/10.5 kW Tool holder: HSK-T 63 Tool changer: 60 positions Max. torque: 73/90 Nm Hollow clamping device: Ø 67 mm Operating hours: approx. 1,130 h Spindle hours: approx. 280 h Technical features & accessories: - Absolute, direct position measuring systems in X- and Y-axes - Dual changeover filter - Counter-spindle ISM 65, A2-8, C-axis and hydr. Spindle brake - Hinged-belt chip conveyor, incl. coolant tank - External chuck flushing system for main and counter-spindle - Coolant supply through the counter-spindle - Coolant spray gun - Safety window cleaning system - Electronic handwheel (if applicable) - Alternating spindle speed - 4-color signal light - Automatic electric work area door - Robo2Go electrical interface - Workpiece probe, Renishaw RMP40 (if applicable) - Tool measuring device, Renishaw RP1 (if applicable) - Drill breakage detection function for Renishaw RP1 Tjdpj Agr Ivjfx Airjd - Position measuring system for Z1-axis - Differential pressure clamping 2.0 on main and counter-spindle - Tailstock function for counter-spindle, incl. footswitch - Coolant system 8 / 40 bar, consisting of: - 600 l coolant tank - Variable pump pressure 8 – 40 bar - Belt filter system - Lift pump with level monitoring - Mechanical oil mist separator - Protection Package - Technology cycle with conversational programming - Technology cycle for workpiece parting-off - 2x 3-jaw chucks, Schunk ROTA THW3 265-81 - Robo2Go loading and unloading system, consisting of: - 35 kg module - Drawer storage unit incl. additional drawer - Accessories on request Accessories, tools, and workholding devices shown are included in the scope of delivery only if specified in the additional information. Unless otherwise agreed, sales between B&B customers are always without warranty.

Condition: good (used), Year of construction: 2010, workpiece weight (max.): 20 kg, spindle speed (max.): 4,500 rpm, turning diameter: 250 mm, workpiece diameter (max.): 240 mm, spindle bore: 52 mm, CNC vertical turning center Manufacturer: EMAG Type: VSC 250 Duo DD Year of manufacture: 2010 / 2012 Control system: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Max. swing diameter: 260 mm Main spindle: Max. speed: 4,500 rpm Max. torque: 250 / 340 / 460 Nm Spindle bore: 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Number of tool positions: 12 Max. tool diameter: 50 mm Max. workpiece weight: 20 kg Max. workpiece diameter: 240 mm Feeds: Rapid traverse (x / z): 45 / 30 m/min Total power consumption: 66 / 75 kW Machine weight: approx. 16 / 18.5 tons There are 3 identical machines available, 2 manufactured in 2010, 1 in 2012. Technical features & accessories: - Marposs measuring system - Open automation - W10 loading portal - Safety guard - Minimum quantity lubrication Todpfx Aio Agr Epored - In-process quality control - Central coolant supply (not included) - Chip conveyor Price per machine. Accessories, tools and clamping devices shown in the images are only included in the scope of delivery if this is stated in the additional information.

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 14,000 kg, The GOODWAY GS-460L is in good condition. An inspection and functional test under power can be arranged by appointment. The machine comes with extensive accessories, including various chucks, drills, and holders. The machine has a manual tailstock. Technical specifications: Year of manufacture: 2007 Control system: FANUC Oi-TC X-axis travel: approx. 330 mm Z-axis travel: approx. 2,032 mm Max. turning diameter: approx. 610 mm Swinging diameter over bed: approx. 737 mm Tedps Agn I Sjfx Airjd Spindle bore: 205 mm Spindle speed: 1,300 rpm Spindle motor: 37 kW Tool turret: 12 stations Machine weight: approx. 14,000 kg

Condition: new, sheet width 4050 mm plate thickness 6.0 mm thickness at "Niro-steel" 4.0 mm down holder 20 Stück no. of strokes 10 - 19 Hub/min cutting angle 0.5 - 2.0 ° throat 150 mm Todpfe Agpg Hex Airjd table height 830 mm oil volume 140 ltr. weight of the machine ca. 12.000 kg range L-W-H 5150 x 2250 x 2200 mm ----- Robust electro-hydraulic CNC guillotine shear with "swing-beam" * Includes CYBELEC CNC touch-screen control system * Includes CNC electro-hydraulic blade-gap adjustment * Includes CNC electro-hydraulic cutting-angle adjustment ----- Equipment: - CNC electro-hydraulic guillotine shear with "swing-beam" (guided-blade) design - Includes CYBELEC CNC touch-screen controller, model "CybTouch 8" - Selected CNC control functions: * Backgauge positioning (X-axis) * Blade-gap adjustment * Piece counting * Cutting-length limitation * Material selection (including sheet thickness) * Cutting-line illumination (for cutting to a scribed line) ... and many more - Motorized backgauge, travel range = 5.0 – 1,000 mm (X-axis) * Driven by recirculating ball screws * Automatically retracts/swings up at maximum travel to . accommodate longer workpieces * Includes selectable "swing-away" (retraction) function * Positioning accuracy: 0.1 mm * Travel speed: approx. 80 mm/sec. - 1x side gauge, with T-slot and mm scale - 2x front support arms, with T-slot and mm scale - Ball transfers in the front support table - Hinged finger guard with safety switch * Finger guard with viewing windows for cutting to a scribed line - Cutting line illumination (shadow line) - BOSCH/HOERBIGER hydraulic system - SIEMENS electrical system - Light curtain behind the machine (safety device) - Movable foot switch - CE mark / Declaration of Conformity - Operating manual + circuit diagram + hydraulic schematic * Special accessories included: - Pneumatic sheet metal support device "MONOBLOCK" * For cutting thin sheet metal * Image shows a machine of similar design

Condition: used, Year of construction: 2008, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: Siemens, controller model: 840D Powerline, workpiece height (max.): 1,580 mm, workpiece diameter (max.): 1,000 mm, total height: 3,394 mm, total length: 5,551 mm, total width: 3,375 mm, table width: 800 mm, table length: 1,000 mm, overall weight: 17,500 kg, spindle speed (min.): 20 rpm, spindle speed (max.): 18,000 rpm, coolant supply: 40 bar, spindle nose: HSK 63, number of spindles: 1, number of slots in tool magazine: 60, Equipment: chip conveyor, documentation/manual, We are pleased to offer this CNC 5-axis universal machining center. It is a Deckel Maho DMC 100U Duoblock from 2008 with the Siemens 840D control. Technical specifications: Table dimensions: 1000 x 800mm Number of pallets: 2 Max. workpiece dimensions: ø1000x1580 mm Max. workpiece weight: 1000kg X-axis travel: 1000 mm Y-axis travel: 1000 mm Z-axis travel: 1000 mm A-axis (rotation of the head): 130 ° (0,001 °) C-axis (work table rotation): 360° Spindle speed: 18,000 rpm Spindle mount: HSK A-63 Spindle motor: 28/19 kW Number of positions in tool magazine: 60 We realise that you may wish to receive further information or view the machine. In that case, please contact us, providing your company details so that we can get in touch with you. Tjdj Agvh Tspfx Airod