Used Foil for sale (859)

Year of construction: 1968, condition: good (used), for aluminium Lhsdpogryk Nsfx Abcjd strip width: max. 1.050 mm strip thickness: 10 - 20 mic

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm Lhedpfx Abs A Dimoced strip thickness: 10 - 20 mic

Condition: used, Year of construction: 2017, Foil wrapping machine Sitma WM 60 Year: 2017 The new automatic intermittent motion side seal machine is equipped with infeed conveyor, shrink tunnel and delivery conveyor Lodowhi Iyjpfx Abcshd Description: - Semi automatic setting - Colour monitor with touchscreen - Straight infeed - Foil unit - Shrink tunnel Specifications: Sitma WM 60 - Packaging possibilities Min./Max. Length: 100 • 420 mm. Min./Max. Width: 75 -420 mm. Min./Max Height: 1-200 mm. Min./Max width of micro-perforated single fold film: 155 • 655 mm. Max. mechanical speed: up to 3,600 cycles per hour

Condition: used, Foil wrapping machine Clamco DEM Description: - L-sealer - Foil unit - Shrink tunnel Power supply : 220 Volt, 3 phases Ledpstlfhyefx Abcjhd

Year of construction: 2000, condition: used, Foil wrapping machine OMG Autofard Lhedpfx Aoku H Aiebced Year: 2000 Description: - Straight infeed - Foil unit - Shrink tunnel Maximum speed 15 piles/products a minute

Condition: used, Year of construction: 2007, Foil wrapping machine Hugo Beck CWS 500 Year: 2007 Description: - L-sealer Ljdpfx Abjulixqscohd Shrink tunnel

Year of construction: 2014, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: JV3D5274-099, For sale is a digital finishing system with hot stamping foil module in very good condition including spare parts dispenser. Lhsdpfx Aeqfddbobced It has been completely overhauled and is ready for use. Technical data: Make: Mgi Jetvarnish JV3D5274 incl. IFoil module (from Körapackmat) Year of manufacture: iFoil 2014 SN: 3649 / Jetvarnsih 2014 SN: JV3D5274-099 Digital single pass inkjet printing with UV varnish using 8 piezo print heads from Konica Minolta type IHM 1024i (2 x 512 nozzles per head) Mechanical sheet transport with automatic sheet feed on the middle/left or right with ultrasonic double sheet detection. Feeder and stacker with a capacity of 4000 sheets at 135gr/m² (sheet stack up to 60cm high) Pixel-accurate sheet detection with laser keyence sensors for varnish form positioning Dual camera system for print mark detection for print data alignment Flat sheet guide with conveyor belt over a vacuum table that can be adjusted to the sheet width using blinds Air-cooled LED pre-drying directly behind the print head bar Infrared unit for surface varnish application Air-cooled high power UV drying from market leader IST-Metz Connected foiling unit for hot foil embossing including sleeking option. Heating roller newly installed Dec 2019 (ran approx. 2 km since then) Intuitive production software with an editor for pixel-accurate editing of the varnish layer.

Condition: excellent (used), Year of construction: 2016, Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Ljdpfxohp Apdj Abcohd

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW Lhjdpefwfpbefx Abcsd

Condition: new, Year of construction: 2026, 1A Gmatick Storage Paternoster (roll rack) The foil storage Paternoster foils is suitable to use for the storage of all 3D-films, it is used as a high storage at the membrane press or as a space-saving storage solution for the 3D foils. Ljdpfx Ajff Huwobcshd With our Paternoster you can storage on very small area approximately 2, 4m x 1, 2m a lot of film rolls (up to 32 rolls of a Ø 300 mm). The required film is thus immediately available at the push of button. Our Paternoster are available from 2.8 m up to 6, 0 m as standard Paternoster. Also special solutions are offered by us, please contact us, we will then find the right solution for your storage. As additional equipment we offer center sleeves, a manual cutting station or the full automatic cutting device and we have also ionization solutions available at Gmatick. • Storage rods ø 42.4 mm • Sleeves inside Ø max. 82 mm,. • Load chain as a hollow pin chain with a breaking load of 100 kN, • Chain pitch is 50 mm hole to hole and this is the raster for the positioning of the mounting foil bars. • Control with a key switch (dead man) for on / off • Rotational speed of the chain is approx. 5.5 m / min • Voltage 400 V, 3N; 50/60 Hz or as USA Version 480V 60Hz • Mains cable with CEKON plug 16A fuse protection (by the customer) 10A slow blow • ground load data at least 2, 2 kg / cm² • Side covering over the entire height of the Paternoster, guards from 2, 2 m above floor to top edge of the Paternoster. • Requirement for the installation of the Paternoster is a viable, flat and solid floor, • Floating floors you can’t install a Paternoster. It is forbidden

Condition: reconditioned (used), Year of construction: 1995, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Lhodpfx Abjxp Ntvocod Max format 790 x 560 mm : max speed 5,500 sheets / hr High speed MABEG suction feeder : : 6 heating zones : 3 x electronic servo longitudinal foil feeds : transverse foil feeds : programmable foil feed with servo drives : non stop delivery Photos show machine in production before reconditioning

Condition: excellent (used), Year of construction: 1980, spool width: max. 1.600 mm spool ID: 150/250/400 mm Lhjdpowzuwtefx Abcod coil weight: max. 4 t coil OD: max. 1.250 mm year: approx. 1980

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, Gietz FSA 790 EFF high speed foil stamping , embossing and die cutting machine Offered fully reconditioned by exclusive Gietz UK distributor Lhedpfx Aox Ezkuebced Max format 790 x 560 mm : max speed 6,000 sheets / hr Top EFF specification High speed MABEG suction feeder : 6 heating zones : 3 x electronic servo longitudinal foil feeds : 3 x transverse foil feeds : 3 line hologram capability : non stop delivery

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, machine/vehicle number: 52EHD146827, Hello, We are selling a Kluge platen press. This machine is capable of hot foil stamping, die-cutting, embossing, and debossing on paper and board up to over 3 mm thick. Maximum sheet size with automatic feeder: 356 x 559 mm Without feeder: 431 x 628 mm The machine is in perfect working condition and remains in daily production. The heating plate is new (worth €5,000). Ljdpfx Aew Udy Njbcshd Kluge is still in operation as a company and can provide comprehensive training if needed. Feel free to contact me for more information.

Condition: refurbished (used), Overview The Matrix 370P is a robust, semi-automatic pneumatic laminator — professionally refurbished and ready for immediate use. Designed to deliver superior lamination performance, its pneumatic pressure rollers enable the use of standard OPP film on many digitally-printed substrates, dramatically cutting lamination costs by approximately 55% while also accelerating throughput. With faster lamination cycles — up to 50% quicker than standard models — this machine is a cost-effective powerhouse for short to medium run production. Ideal for digital print shops, in-house finishing, or commercial print environments needing reliable, high-quality lamination without the overhead of a full-scale production laminator. Key Features Pneumatic pressure rollers — delivers consistent, high-quality lamination across a variety of substrates; optimised for standard OPP film. Faster turnaround — up to 50% quicker lamination cycles compared to standard models, enabling higher throughput and increased productivity. Cost-effective running costs — significant savings on film usage thanks to compatibility with standard OPP film. Semi-automatic feeding & automatic sheet separation — simplifies workflow and reduces manual handling. Lsdpfx Abexzqm Ijcjhd Swing-out control panel — easy to use, ergonomic control for quick job setup and changes. Steel lamination roller & anti-curl device — ensures flat, high-quality finishes even on thinner stock. Multifunctional finishing with Express Foiling Kit — expand beyond lamination with digital foiling, holographic effects, glitter lamination, or Spot-UV style finishes. Adds value and versatility for a broader range of applications. Silent Compressor included — controls pneumatic roller pressure while keeping operation quiet enough for office or print-room environments.

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 11115, Foiling machine for PE foil for profiles Ljdpexght Asfx Abcjhd

Condition: used, functionality: fully functional, machine/vehicle number: 908108, fuel type: electric, Year of construction: 2009, Kama Pro Cut 53 (2009) with Mabeg M1/60/400 Suction head and Sidelay (2008) Fully operational and rarely used. Please message so a video of the machine operating can be provided. For cutting, creasing, perforating, kiss-cutting, cold embossing and Braille. Profitably even with small and personalised runs. Be it printed matter or packagings, offset or digital printing. Benefits • AutoRegister, aligns each sheet to a print mark • Multifaceted applications for the 530 x 400 mm format • Highest register accuracy (less than 0.1 mm) • Profitable finishing also of small runs • Clean cutting contours thanks to very few to no nicks • Moving upper table ensures gentle passage of the material • Space-saving design, requires only 4.5 m² Options • Motor-driven pressure control system (MPC) • Cutting pressure indicator on the display and automatic overload protection • Platen changing system (4+1 mm) • Module for hot cutting of plastic materials • Hot foil and hologram stamping module available for retrofitting Technical Features • Material: Paper, cardboard, plastics 80–800 g/m² • Maximum sheet size: 530 x 400 mm Lhodpfx Aswh Tq Sjbcsd • Minimum sheet size: 210 x 148 mm • Maximum cutting size: 530 x 390 mm • Minimum gripper margin: 10 mm • Height of cutting blades: 23.8 mm • Maximum machine performance*: 6,000 sheets/h • Maximum cutting pressure: 120 tonnes • Maximum stacking height (sheet feeder): 700 mm • Maximum stacking height (delivery unit): 500 mm • Dimensions: 2.60 x 1.75 m • Net weight: 3,000 kg * dependent on material, sheet size and die configuration. when using a cardboard kit (option) or single-sheet feeding. Technical data and figures are subject to change.

Year of construction: 2020, condition: new, A new Cassel Ferrous In Foil Metal Detector with an aperture of 350mm x 200mm - this unit was purchased new and never used - Metal Detector for industrial foreign body detection - Metal Shark 2A BD - complete with instruction manual in English - ready to ship worldwide from our warehouse. This is a digital metal detector for conveyor applications - housing in stainless steel - Digital control box attached to sensor and IP rated IP54 Lhedpfx Abet Dkrcjcod Ethernet Module enables software connection (auto reporting and remote maintenance) Estimated Sensitivity based on the aperture size is Fe 3.5 - 4.5mm Comments - Sensitivity performance of Ferrous in Foil MD type depends on product speed - The faster the product through the aperture the stronger a metal amplitude becomes. Recommended belt speed minimum is 500mm/sec. Ask for video of system operating

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, NEWFOIL 2000 MKII year 1996 web with 125mm Max. printing area 125x150mm Max. die cutting area 125x150mm Lhsdpfx Absyrzzfjcod Speed 6000 cycles Re-register cell can use 2-foils unwind rewind

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2197, Basic Specification: Two-station machine with a 250 mm web width. Print Head: One hot foil printing and embossing unit. Print position adjustable longitudinally, laterally, and rotatively. Features quick-change die plates. Die-cutting Station: Integrated die-cutting and punching unit with adjustable cut position longitudinally, laterally, and rotatively. Quick-change cutter plates for rapid setup. Web Indexing: Digital electronic web registration system with a zero-backlash indexing drive. Unwind Unit: 1,000-metre unwind capacity, powered nip with loop feed to a vacuum tension drum for consistent web tension. Lhsdpfxoxt N Twe Abcjd Rewind: Separate label and matrix rewinders with independent rewind motors, reversible for both inside and outside rewinding operations. Foil Indexing: Two servo-driven foil pull units with quick-release nip rollers for efficient foil management. Direct Remote Access Unit: Enables direct remote access to the Newfoil machine via the Internet. The unit connects to your company network using a standard Ethernet cable. Firewall-friendly, utilizing a fully secure SSL-based VPN tunnel. Temperature Control: Digital temperature control with LED display, ranging from 0°C to 400°C. Operating Speed: Variable speed servo drive. Maximum throughput: 18,000 impressions per hour; minimum: 2,000 impressions per hour. Guarding: Fully enclosed “Clear View” guarding system with interlocked doors in compliance with current E.C. safety regulations. C.E. Mark: Each machine is C.E. marked and individually certified.

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: 2173, type of input current: three-phase, total height: 2,200 mm, warranty duration: 12 months, temperature: 200 °C, New Newfoil NM3534 Machine Working width: 340 mm Printing area: 310x270 mm Die-cutting area: 310x270 mm Lodext N H Dspfx Abcehd 18,000 impressions per hour

Year of construction: 1999, condition: good (used), Specification: Adjustable bed 2 foil pulls Variable Accel / Decel and delay pull pulse – to provide accurate foil pull and prevent preheating of foil. Foil Countdown in metres – this system will provide a warning that a foil change is required and is controlled via the touchscreen. Electronic front and sidelay sensors Auto impression Preloader Machine has been completely built by Starfoil. Lhodpfx Aehy N Uhebced Condition as is.

Condition: excellent (used), type of input current: AC, input voltage: 230 V, Equipment: compressor, MATRIX MX 530 DP, double-sided thermal laminator, with foiling attachment. Complete with continuous feeder, touch screen controls, miss feed detector, air operated laminating pressure, auto sheet separation drop sheet delivery. It is a pneumatic model with a built-in compressor for high-quality lamination of digital print. Complete with the gilding attachment and second feed roller for double-side laminating. This machine is in good condition, just serviced and ready for work. We can arrange export packing and transportation. (quotation on request) Our price includes packing on a pallet and loading onto your transport. Payment in GBP in full before loading. Preferred payment method, bank transfer. Please do not hesitate to ask if you need further information. Specifications: Max sheet size 510 x 640mm Min sheet size 200 x 300mm, Max speed 10m/min Film unwind shaft 75mm dia Lhsdpfor Ddu Iox Abcod Temperature range 80-140 deg C Electrically heated laminating roller Electrical supply 220-240V, 50 Hz, 1 ph, 10A Machine weight 260kgs Machine size 1868L v 910W x1 285mmH

Condition: used, Year of construction: 1973, This Heidelberg OHT, manufactured in 1973, is a robust and reliable punching machine designed for high-volume production. With a serial number T 184 103 H, this unit is currently located in Germany. It handles a largest sheet size of 260 x 380 mm and a smallest sheet size of 40 x 70 mm, with a maximum mold size of 260 x 350 mm. The machine delivers a punching force of 40 tons and boasts an impressive capacity of 5,500 sheets per hour. Powered by a 380 V, 1.25 KW motor, it features two locking frames and weighs 1,100 kg, making it both powerful and stable for continuous operation. The machine is offered as seen, ready for inspection and integration into your production line. Format: 260 x 380 mm Equipment: Hot foil system: original HEIDELBERG Largest sheet 260 x 380 mm Smallest sheet 40 x 70 mm Lhodpfx Ajwxm Rmebced Max. Mold size 260 x350 mm Punching force 40 tons Capacity 5500 Bg./h 380 V 1,25 KW Own weight 1100 kg 2 Locking frame

Condition: like new (used), Year of construction: 2018, GM - FB330 Finishing Solution Year of Manufacture: 2018 _____ Machine Specifications and Equipment: HIGH-PRECISION FINISHING MACHINE  Max. web width 330 mm  Min. web width 50 mm  FLAT BED HOT FLOW PRESS UNIT  Speed 6000/H embossing or 10-15m/min  Web width 110mm - 330mm  Substrates 50-200um  Label paper 60-120 g.  UPM Vellum natural wine paper. RAFLACOAT RP48AT semi gloss paper  All other substrates must be tested by GM  Polymer (blind embossing ONLY)  Sheet thickness: 5-10mm. 7mm is standard  Backing plate, self-adhesive rubber (1-3mm). SH65  Plate size and type 304.8 x 330mm. 5-9mm magnesium  Plate pressure 30 tons  Foil feed transverse and longitudinal direction (rotating tower)  Temperature contr. 80°-130°C  Heating time 20 min.  SCREEN PRINTING UNIT  Speed 4000/h overlays or 5-15 m/min.  Web width 110mm - 330mm  Frame size 660mm x 500mm  Frame type 30mm x 30mm aluminum frame  Print area 330mm (length) x 330mm (width) MACHINE: Fully servo-driven line with web tension control. Modular design can be equipped with e.g. hot air drying and inkjet, etc. Modern single-sided housing for easy retraction and maintenance. 1. UNWINDER 2. WEB EDGE CONTROL 3. FLAT BED SHEET IMPACT UNIT 30 ton high precision flatbed unit delivers superior blind embossing and hot foil quality Servo Drive System ensures consistent pressure and embossing time at all speeds Integrated foil saving function Swivelling foil tower can be used on both sides A single module for blind embossing and/or flatbed hot foil The system uses magnesium, brass/sheet metal or polymer plates Plates can be changed while hot using a carriage system 4. SCREEN PRINTING UNIT Servo register system for print marks or optional label distance sensor Pneumatic squeegee with servo movement 5. REWINDER Rewinder for roll diameters of Ø600mm (depending on job/material) Electronic control of speed, position and torque Automatic control of the rewind tension for every speed and all rewind diameters Lhsdpfsvvmnnox Abced Pneumatically replaceable rewind shaft Ø 76mm Inner and outer winding