Used Foil Wrapping Machine for sale (64,458)

Condition: good (used), Year of construction: 2014, functionality: fully functional, machine/vehicle number: K500-50739, total length: 14,000 mm, total height: 2,500 mm, total width: 3,600 mm, type of input current: three-phase, product height (max.): 100 mm, product height (min.): 30 mm, product length (min.): 500 mm, product length (max.): 1,800 mm, product width (max.): 1,500 mm, product width (min.): 600 mm, input voltage: 400 V, compressed air connection: 6 bar, input current: 33 A, working height: 900 mm, table width: 1,700 mm, table length: 2,000 mm, passage height: 250 mm, year of last overhaul: 2022, workpiece weight (max.): 100 kg, Equipment: documentation/manual, Dimensions of the entire machine: Width: 3,600 mm Length: 10,600 mm (without feed and deposit areas) Height: = 2,500 mm Working height: 900 + 50 mm Feed rate: 13 - 23 m/min (frequency-controlled) Properties of the PE shrink flat film • Shrink film suitable for the shrink sealing process. (Top and bottom films must be laterally sealable in the tunnel). • Biaxial shrinkage value of approximately 50-60% lengthwise, approximately 40-50% crosswise • Antistatic treatment. • Shrink film with needle perforation. Improves the shrinking process and has higher gas and water vapor permeability. Shrink film to be used • Biaxially shrinking, needle perforated. • Spooled on rolls, sound-tight and with straight edges. Foil thickness: Application: approx. 40 - 60 μm. Film widths: Application: 800 mm, 1100 mm, 2000 mm Roll outer diameter: max. 350 mm Core outer diameter: min. 90 mm Bottom film calculation: Package width + 200-250 mm Top film calculation: Package width + (2 x height) + 200-250 mm Technical component data: Conveyor belts: Infeed conveyor (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. Roller conveyor behind the tunnel (W x L) 1,700 x 2,000 mm / Feed speed 13-23 m/min. KFE standard film wrapping machine: Max. film roll width, top and bottom: 2,100 mm / Package height (passage height): max. 250 mm / max. Film roll diameter: 350 mm Film thickness: approx. 40-60 µm high-quality PE film / Weight: approx. 3,100 kg Side sealing: Sealing bar length: 1,850 mm / Adjustment range: 500 - 1,600 mm / Adjustable feed rate: 13 - 23 m/min. Shrink tunnel ST / lI -1800 -3000 -300: Clear hood opening: 1,860 mm wide / 300 mm high / Hood length: 3,000 mm / Transport length: 3,560 mm Dodpfx Afjvvlyispscc Adjustable feed rate: 6 - 23 m/min. The machine can be inspected at the production site.

Condition: excellent (used), Year of construction: 2016, Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Dodpfx Aohp Apdjfpecc

Condition: ready for operation (used), An AVT flat film packaging machine including an angled conveyor belt is available. Film type: PE/PP, film width range: 120mm-600mm, film thickness range: 40µm-200µm, machine dimensions X/Y: approx. 1400mm/1400mm, weight: approx. 250kg, control: Siemens. Documentation available. An on-site inspection is possible. Dcsdsxf Iihopfx Afpjc

Year of construction: 2000, condition: used, 3 feeders 1 folding station adressing unit Sitma 950 foil wrapping machine infeed to the stacker with reject unit stacker Dcodpfediyknex Afpjc belt delivery

Condition: good (used), Palette wrapping machine Dodpfxsd Tndbe Afpscc

Year of construction: 2009, condition: good (used), Built in: 2009/2005 Size: min 100 x 120 mm max 300 x 430 mm Thickness: max 40 mm Film thickness 20-100 mµ Mechanical speed: 25,000 Ex./h Equipment: • 10 stations rollstream ROS • 1 VSE-ROS-ES-RE-300-KWE twin multi disc unwind station AWS • 4 MTD-AWS-OWK • built in 2005 JET Feeder • 8 JEF-450-FVM-SA190 Dcjdoc Icm Repfx Afpec • built in 2005 foil wrapping machine CMC 2800 • with two feeders • built in 2009 twin stacker CMC

Condition: good (used), Height: max 1,800 mm Pallet format: max 1,000 x 1,200 mm Speed: max 30 pallets/h Electrical system: 380 VAC Electrical system: 50 Hz Electrics: 3 PH Clamping force: max 5,500 N Equipment Dcjdpfx Ajqqkx Njfpec - Strapping machine: XP-112 MV - Sealing head CFH-1 - Stretch wrapper: GL-215 - Control system: S7

Year of construction: 2020, condition: new, A fully automated film rewinding machine according to GMP guidelines. Foil rewinding machine type FUM-900 CP This film rewinding machine is used to rewind film rolls that have run in large systems or are not wound with the correct winding tension, and thus to prepare them for further processing. It was designed according to the special pharmaceutical guidelines and for the processing of PVC film. Advantage of our machine: with two separate drives, we can guarantee both right and left winding. Technical details: Width: 1,600 mm Depth: 850 mm Height: 1,100 mm Materials: In contact with the product: 1.4301 / acrylic Performance: up to 120 m / s Dsdpfjfwfpbox Afpscc Speed: infinitely variable Ø film rolls: max. 450 mm Connection: 230 V / 50 Hz Drive: direct current 0.25 kW

Year of construction: 1993, condition: ready for operation (used), Pallet dimensions X/Y: 1200mm/1200mm, max. pallet weight: approx. 2000kg, max. film width: 500mm, max. turntable speed: 10U-15rpm, power: 2.5kW. Documentation available. On-site inspection is possible. Dcjdpfx Aoumwgxofpsc

Condition: ready for operation (used), Year of construction: 1991, A Kallfass Pack-Jet 2000 film packaging machine with a Kallfass Universal 450N shrink tunnel is available. Max. film roll width: 760 mm, rated power: 9 kW, operating voltage: 380 V, control voltage: 24 V, main fuse: 3x 20 A, rated current: 18 A. With Kallfass Universal 450N shrink tunnel, rated power: 16.5 +1 kW. System length: approx. 9000 mm, width: 1400 mm. The transformer for the sealing stamp is defective. On-site inspection is possible. Djdpfx Afew Nykmjpscc

Condition: ready for operation (used), Year of construction: 1994, A Schüco profile rolling machine for the thermal separation of aluminum profiles in window, door and façade construction is available. Processing speed: 45m/min, control speed: 15m/min, max. profile height: 400mm, max. profile width: 250mm, max. insulating bar width: 300mm, machine dimensions X/Y/Z: approx. 2700mm/800mm/1650mm, weight: approx. 900kg. Including automatic insulating bar feeder, safety cage/alignment roller set, roller conveyor and roller conveyor extension. Documentation available. On-site inspection is possible. Dedpfxewtg Hws Afpecc

Condition: ready for operation (used), Year of construction: 1998, With documentation and some accessories, an on-site inspection is possible, but not under power. Dsdpfx Ajrl Rbvofpscc

Year of construction: 2022, condition: refurbished (used), functionality: fully functional, LEONARDO has all the properties of the small, yellow LEO stretch robot, such as the small working area of 750 mm around a pallet, compact design and motorized drive. In addition, it offers an electronically adjustable film brake, up to 100% motorized film stretching and the patented push mast, which allows it a winding height of 2,350 mm - with a total height of only 1,560 mm when not in use. • Compact design: only 75 cm space required • For pallets up to a maximum height of 2350 mm • Patented extension mast, from 1560 mm (at rest) to a maximum height of 2,350 mm • Electronically adjustable film brake, a motorized up to 100% • Electric maneuver (patent) that reduces the work area compared to other robots Djdpfjih Srijx Afpocc • 6 freely programmable programs (program memory) • Wide caliper strap • Electrically controlled steering • Maintenance-free battery (2 x 12 volts) • Charger: 220 volts integrated Pallet dimension: Length: min. 600 mm / max. without limit Width: min. 600 mm / max. without limit Height: min. 500mm / max. 2350mm Foil thickness of 8-30 my Pallet weight: min. 50 kg machine size: Height: 1,560 mm (resting state) Length: 1066mm Width: 738 mm Weight: 195 kg Battery for electric drive 24 V Built-in quick battery charger 230 V Warranty: 12 months (single-shift operation),

Year of construction: 2005, condition: used, Built in: 2005 Capacity: up to 35 pallets/h Film width: 500 mm Diameter: max 260 mm Core diameter: max 76 mm Film thickness: 17-30 mµ Dcodpsc Icd Uefx Afpjc Equipment • infeed belts • delivery belts

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S23SFERA05, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Dcodpfx Afov Iqw Dspoc Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 3500mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program Dcjdjwtc Abepfx Afpsc TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: S25SFERA06, Mobile stretch winder ATLANTA SFERA Easy TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series Dcjdjv Iqzcspfx Afpec 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2000 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) FILM SLIDE TYPE “FM” WITH MECHANICAL BRAKE Brake can be adjusted manually from the carriage by means of a tension roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Optional: stretch film with core Ø50mm or coreless stretch film Standard connection values: 230 V - 1L+N+PE - 50 HZ Optionally available: -winding height up to 2400mm -FILM CARRIAGE TYPE “FE” (ELECTROMAGNETIC BRAKE) - FILM CARRIAGE TYPE “OPRS - ONE PRE STRETCH" 200% -FILM CARRIAGE TYPE “PRS” (POWER ROLLER STRETCH) 200% - FILM SLIDE TYPE “PS” (POWER STRETCH) 120-400% -Automatic line formation to strengthen the winding .Automatic system for cutting the film in 3 strips for “BANDEROLL WRAPS” - Machine version for temperatures down to -5° C -BATTERIES LITHIUM RELION 2 x 12V Other systems available from the Ludwigsburg warehouse. Illustration similar.

Year of construction: 2025, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, Mytho S with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible Dcsdpewtc Epofx Afpjc TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2022, operating hours: 50 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: S22SFERABurgerKing, Exhibition facility Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Dcjdpfxerqgive Afpoc Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available from the Ludwigsburg warehouse

Year of construction: 2024, operating hours: 1 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: SFERA21Kommission1, Stretch winder ATLANTA SFERA Easy 6 programs can be saved individually Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm GMK (compass) The start and end of the winding is always identical Manual line formation Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series 160 pallets per charge - charging time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: Dcedpfx Aswtc Azsfpoc All function parameters can be set via the display F00 - Screen lock program change F02 - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Pallet wrapping height setting F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F17 - F20 - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Display foil consumption (option for PRS - PS) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 6 storable wrapping programs for SFERA EASY F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F21 - Wrapping cycle for large pallets F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges

Year of construction: 2009, condition: good (used), - Fully automatic - Package height max. (mm): 650 - Package height min. (mm) :15 - Package width max. (mm): 1250 Dsdpfxspu Anms Afpecc - Package length min. (mm): 300 - infeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed conveyor (mm): approx. 2.000 x 1.300 x 900 - Outfeed table - Overall dimensions (mm): approx. 8,000 x 3,000 x 2,200 - Total connected load (kW): approx. 5

Year of construction: 2025, condition: new, Böhl - wrapping machine type JUNIOR/S-450 VA Product dimensions: Length: 600/800mm maximum 5800mm Width: 15mm maximum 220mm Height : 15 mm maximum 120 mm Maximum weight 30 kg/metre The maximum cross-section diagonal of the previous customer was 220 mm. The specified weights are only possible with a driven on-site roller conveyor. Technical specifications: Electrical control: Siemens S7 with TP Control voltage: 24V DC Operating voltage: 3 x 400 V/50 Hz, N, PE Pneumatics: FESTO Compressed air: 6 bar dried, cleaned and oil-free Air consumption: about 20 NL cycle Maximum feed pressure: 8 bar Noise emission value: less than 80 db/A Machine compare layout Dcsdpfjwqdm Asx Afpec Operating side: on the right in the conveying direction Control cabinet: on the left fixed to the machine Varnish machine 7032, gray black-yellow Runway height: 900mm

Condition: excellent (used), Siat Semi-Automatic Pallet Wrapping Machine Wrapping Programs Program 1: Double wrapping with raising and lowering the film carriage. Program 2: Double wrapping with raising – pause for applying the pallet top cover – and lowering the film carriage. Program 3: Single wrapping with only raising the film carriage. Program 4: Single wrapping with raising the film carriage and pause for applying the top cover. Dcjdpsrt U Sdofx Afpoc Capacity: 1200 kg Turntable diameter: 1500 mm Adjustable turntable rotation speed. Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm kg = 1200 Other items in other sizes – new and used – can be found in our shop! International shipping costs upon request!

Year of construction: 2000, condition: good (used), Siat HSD 312 - S Semi-automatic sheet wrapping machine Version with horseshoe turntable for easy loading with a pallet truck Manufacturer: Siat Type: HSD 312-S Model A 400 Volt / 50 Hz Year of construction: 2000 Capacity: 1200 kg Turntable: with fork recess Turntable diameter: 1500 mm Adjustable turntable rotation speed Motorized film pre-stretch adjustable to 100 % or 200 % Turntable height: 75 mm Wrapping programs Program 1 Double wrapping with lifting and lowering of the film trolley Program 2 Double wrapping with lifting - pause for attaching the top cover of the pallet - and lowering of the film trolley Program 3 Single wrapping with only lifting of the film trolley Program 4 Single wrapping with lifting of the film trolley and pause for attaching the top cover Intended use Wrapping palletized loads with stretch film or in a net Maximum pallet dimensions: L = 1200 mm W = 800 mm H = 2100 mm Dodpfxjpygwqe Afpscc kg = 1200 Further articles - new and used - can be found in our store! International shipping costs on request!

Condition: excellent (used), Year of construction: 2021, Semi & fully automatic pallet wrapping machine Manufacturer: Cousins Model: LPSWA-CE (“The Switch Semi2Auto”) Operating mode: Semi-automatic & fully automatic Dsdpfowb A N Rsx Afpecc Year of manufacture: 2021/2022 Functions and specifications of the LP-SWA-SERIES Production speed: Up to 35 loads per hour. Load capacity: Maximum load weight: 4,500 lbs dynamic - 10,000 lbs static Maximum load size to safely pass the tower: 67“ x 67” (96“ load diagonal) x 80” H Maximum load size to stay inside the turntable: 46“ W x 46” L (65“ load diagonal) x 80” H Low profile turntable: 65” diameter, laser-cut steel top with all-around deck protection. Maintenance free 54-roller bearing support system. Turntable height 2.813 inches from floor. ANSI No. 50 direct chain drive with chain tensioner. Speed between 3 and 12 rpm with smooth start acceleration Film carriage elevator: 1/2 HP DC motor with variable speed ANSI No. 40, direct chain drive with shock absorber and fall protection Automation functions: Fully electric - no pneumatics required Cousins Smart Engineering has developed the A-Arm, an advanced cutting and holding device. It offers significant productivity gains and safety benefits. This technology is only available on Cousins machines. This unique method of applying and cutting stretch film offers you the following benefits: - Selectable banding function at the top - Stabilizes the load early in the wrapping cycle - Places the film end at the top of the load instead of the bottom - There is no film clamp on the turntable that can be damaged by dirt or operator error - and Also, no slip rings are required to power the turntable, reducing maintenance requirements - Load placement on the turntable is not critical - No air connections or noisy compressors - New automatic load detection safety feature on first rotation detects unevenly or partially stacked top layers and automatically adjusts the A-arm height to avoid obstructions - A-arm fall protection Control functions: Electronic control with LED user interface Wireless start/stop remote control with one transmitter (additional transmitters available) Power off - power on - reset switch and operation indicator Automatic wrapping cycle start/pause with just one button Cycle pause for applying the cover sheets Reinforce the wrapping control for the wrapping center Emergency stop button Turntable jog button Buttons for lowering and raising the film carriage Film tension control (force-to-load) Separate speed controls for raising and lowering the film carriage Variable speed control of the turntable Three-beam automatic load height detection sensor for dark or shiny loads Separate control for 1 to 12 turns top and bottom wrapping Selectable parameters for reduced film tension to wrap the top and/or bottom of the load Non-proprietary UL/CSA approved components A - B - C wrapping program selector with the option of entering and saving individual wrapping parameters for each program Product video 1 Product video 2 Product video 3 You can find more items - new and used - in our store! International shipping costs on request!