Used Foam Machine for sale (65,130)

Condition: good (used), Year of construction: 2015, We offer you: Foam cushion packaging machine Manufacturer: Sealed Air Model: Instapak 901 Lsdew Ra Ihepfx Abcshd Year of manufacture: 2015 Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to changes and errors in technical data and details, as well as prior sale!

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: MzBs001, Equipment: CE marking, Foam sealing machine, automatic upper and lower cover sealing machine, adopts PLC control,adjusts the tape to the sealing position through the adjustable handle,touches the screen to select the corresponding model and presses the start button to automatically seal the tape. The sealing effect is flat and beautiful, and the sealing is firm. It can be operated by a single machine or matched with an automatic packaging line. Widely used in food, fresh food, cold chain, e-commerce and other industries. Ljdpfxsxu Agms Abcohd

Year of construction: 2017, condition: ready for operation (used), A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible. Lhsdpfx Aex A Hg Hebcod

Condition: used, Year of construction: 2007, functionality: fully functional, machine/vehicle number: 3542, conveyor belt length: 2,200 mm, conveyor belt width: 2,200 mm, conveyor belt speed: 116 mm/s, total length: 4,000 mm, total width: 4,000 mm, total height: 4,500 mm, overall weight: 4,000 kg, discharge height: 3,500 mm, power: 7.2 kW (9.79 HP), type of input current: three-phase, input voltage: 380 V, input frequency: 50 Hz, pivoting range: 90 °, Equipment: documentation/manual, We offer the following used D.B. S.R.L. PCLO 2200 contour foam cutting machine, manufactured in 2007. Manufacturer: D.B. S.R.L. Model: PCLO 2200 Year of manufacture: 2007 Condition: used Lhjdpfx Abex T Ax Nscod Category ID: 34 Type ID: 3028 Type: Contour Foam Cutting Machine If you have any questions or need more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 010199, input voltage: 220 V, height adjustment type: electric, total length: 4,820 mm, overall weight: 5,000 kg, total width: 3,760 mm, total height: 2,395 mm, control cabinet height: 1,627 mm, control cabinet length: 550 mm, control cabinet width: 550 mm, electrical fuse: 10 A, input frequency: 50 Hz, For sale: CNC Foam Cutting Machine - RAM SLC 499 SUPERFAST. Year of manufacture: 2006. Regularly serviced and fully operational. The machine is in continuous use – testing on site is possible. Lhsdpfx Absyaxrkocsd Cutting dimensions: a-2200 c-2200 h-1300 Transport to your specified address can be arranged. For more information, please contact by phone only: 508388091

Year of construction: 2022, condition: used, Manufacturer : Buhler Haas-Mondomix B.V. Model: HAKA type VA-15L Year : 2022 Type : Foam / Aerator mixer Previous application : Application : Whipped cream Production capacity : 100 kg/hr nominal Input density : 1,0 kg/l Output density: 0.6 – 0.8 kg/l   Near as new condition. Unit consisting of : – Pre-mixer PCM 400 litres Capacity: 400 litres Design: conical bottom Lid with hinged access for manual loading of ingredients Lsdpjx R A Rtofx Abcohd Jacketed, insulated and protected tank Stirrer: cutting blade + Teflon scrapers PT100 temperature sensor – HALA type dispensing pump with frequency converter Volumetric pump with frequency converter Jacketed design Mass flow meter with regulator – HAKA VA-15L type continuous aerator Rotor / stator with 912×5 mm square lugs Effective volume 2 ltrs Mixing head stator Double-walled front and rear plate for cooling Rotor designed for cooling Temperature sensors Jacketed piping 7.5 kW direct drive motor, frequency converter controlled Air injection: manual or automatic with mass flow meter Automatic pressure control and regulation Cabinet + PLC, Siemens S7 type – HANB cold water production unit Autonomous chilled water unit (thermoregulation) for cooling the expansion head tank Water temperature between 5°C-20°C Spiral heat exchanger / Centrifugal pump / Closed water tank – CIP Easy Clean system for easy cleaning Stainless steel platform supporting all equipment

Year of construction: 2024, condition: good (used), Foam Cutting Machine Hyma NSL Manufacturer: Hyma (Denmark) Model: NSL Condition: Almost like new / exhibition machine quality Year of manufacture: 2024 Machine dimensions: Lhjdpfjx Iwp Eox Abced Cutting height: 1300 mm Cutting length: 2470 mm Left table (from blade): 2000 mm Right table (from blade): 1250 mm Side stop height: 900 mm Additional Equipment according to Hyma = AA AA6 adjustable angle side stop, 0-90 degrees AA9 upgraded drive motor, 2.2 kW AA11 electric grinding device with dust extraction (motorized and friction drive possible) AA7 extra smooth table top for stenciling Standard Equipment - Ratchet for serial cutting - Motorized height-adjustable blade guide - 4-rail roller table system - Safety protection screen The machine is connected and can be tested onsite. Machine location: Darmstadt Offered only due to internal restructuring. NO LACK OF SPACE; NO DISTRESSED SALE! _____ Our general terms and conditions apply. The seller does not assume liability for typographical or data transmission errors. All descriptions and images were provided by the owner and released for publication. The visual appearance of the items corresponds to their age and the enclosed images. The technical condition and wear of the items offered correspond to their age. Used machines are sold exclusively to commercial buyers and without any warranty.

Condition: new, Year of construction: 2025, machine/vehicle number: sn. 816, functionality: fully functional, total height: 3,500 mm, total length: 3,600 mm, total width: 4,000 mm, cutting height (max.): 1,300 mm, feed length X-axis: 2,600 mm, feed length Y-axis: 1,300 mm, space requirement height: 3,600 mm, space requirement length: 4,200 mm, space requirement width: 4,500 mm, warranty duration: 12 months, Polish manufacturer of machines and equipment for cutting and processing polyurethane foam with over 25 years of experience offers for sale a brand-new automatic horizontal cutting machine, Model: TYPE PARK. The machine features a stable and robust steel construction. Cutting is performed by the movement of the cutting frame along the X and Y axes, while the table remains stationary. The cutting frame is driven by two reinforced toothed belts and moves on linear bearings along the X-axis. In the Y-axis (up and down movement of the frame), the feed is powered by two ball screws and linear bearings. The machine supports both single-sided and double-sided cutting modes and includes an automatic cutting correction system for double-sided cutting. Machine equipment includes: Automatic, self-adjusting saw blade tensioning system Lhjdpfxjwq Dvdj Abcod Stationary table with powered conveyor belt for easy material loading Automatic cutting length measurement Quick-change system for the saw blade Automatic material clamping system Working parameters: Cutting width: 2100 mm Cutting length: 2500 mm The machine is fully enclosed with safety fencing and equipped with safety light curtains at the loading and unloading zones. As the manufacturer, we provide installation and servicing within the EU. The machine is CE certified. We also offer a wide range of machines and devices for cutting foam and mineral wool. We invite you to explore our full range of products.

Year of construction: 2025, condition: new, Equipment: CE marking, Our company has been building foam cutting machines for over 15 years. The experience gained over the years of working on foam processing machines has allowed us to build the 4th generation of vertical machines RV 2500/2100 as well as the 3rd generation of horizontal contour lines SK3500. Our machines work on the Polish and European markets. The machines are designed and built in our company, the software is also our own. The materials used to build the machine are widely available on Polish and European markets. Our service works 7 days a week, providing a sense of security to our customers. Vertical machine left table 2100mm x 2600mm right table 2100mm x2600mm cutting height 1340mm Horizontal liner SK3500 rotary table 2200mm x2200mm Lodpeiqt N Iefx Abcjhd cutting height 1250mm

Condition: excellent (used), Year of construction: 2005, Basic data: Production year: 2005 Dimensions (LxWxH): 7580x4360x5120 mm Ljdpferfn Rvox Abcjhd Weight: 6000kg Operating voltage: 400/415V 50Hz Power consumption: 20kW Capacity at 20g/l: 1600kg/h Touch screen control panel Powder tank with screw feeder Complete documentation in both paper and electronic form (electrical schematics, CE compliance certificate, user manual) Condition: very good (machine clean and well-maintained, used exclusively for foaming white polystyrene) For an additional fee, our company can arrange transportation, as well as the installation and commissioning of the machine by our technicians at the location specified by the customer.

Condition: ready for operation (used), functionality: fully functional, ✂️ Foam Flake Cutting Machine – Model BC206 Ideal for manufacturers of sofas, armchairs, mattresses and cushions, the BC206 foam flake cutting machine is designed to transform foam blocks into flakes of various sizes (from 3 to 50 mm). These flakes can be used as padding to ensure optimal comfort and increased durability of the finished products. ✅ Technical characteristics: Dimensions: 3000 x 1200 x 1100 mm Weight: 1000 kg (robust and stable structure) Production capacity: 350 to 400 kg / h Adjustable cutting size: 3 to 50 mm according to needs Motor power: 28.9 kW (high performance and energy saving) 📦 Applications: Manufacture of cushions, poufs and pillows Upholstery of sofas, mattresses and car seats Production of flakes for foam recycling projects 🛠️ Advantages: Fast and efficient production: The high cutting capacity allows continuous production, ideal for high-demand industries. Easy adjustment of the size of the flakes: The user can adjust the size of the flakes to meet different market requirements. Solid structure: The machine is built to last, with industrial quality materials. Ljdpfovn T Hnex Abcohd Energy saving: The high-performance motor consumes less energy while offering maximum productivity. 🌱 Ecological Solution: This machine also allows you to recycle foam scraps and recover them in the form of reusable flakes, thus contributing to the reduction of industrial waste.

Condition: excellent (used), Year of construction: 2014, Type: CNC horizontal contour cutting machine Manufacturer: Fecken Kirfel Designation C56 Year of construction: 2014 Dimensions: Cutting width 1300 mm Cutting length 1300 mm Cutting height 1300 mm Blade rotation of +/- 360 degrees Lodjr Ilb Sopfx Abcjhd Max. Cutting speed 25 m/min Info: Very well-maintained CNC contour cutting machine with revolving bandknife and automatic grinding device. High precision in the smallest of spaces. Very small footprint The machine is network-compatible and can be integrated into the Windows network. The machine is still in daily use and can be inspected by appointment. Further information on request Available immediately Disassembly and transportation must be done by the buyer. Please also note our other sales ads

Condition: excellent (used), Type: Vertical cutting machine Manufacturer: Albrecht Bäumer Designation IS/M Year of manufacture: 1993 (2017-retrofit mechanical and electrical) Dimensions: Table to the left of the meter 2200 mm Table to the right of the measurer 2200 mm Cutting length 2580 mm Cutting height 1500 mm Side stop right 1200 mm Side stop left 1200 mm foldable motorized grinding unit height-adjustable blade guide Info: ISM vertical cutting machine from Bäumer in top condition The machine was completely overhauled by the manufacturer in 2017 (Retrofit Step 1-4) Machine is still in use and can be inspected by appointment. Further information on request Available immediately Disassembly and transportation must be done by the buyer. Lsdpjr Iirnefx Abcohd Please also note our other sales ads

Condition: like new (used), Year of construction: 2018, Type: Vertical cutting machine for foam and similar materials Manufacturer: Albrecht Bäumer Designation IS/M-3 Year of construction: 2018 Dimensions: Table left of the measuring sensor 2500 mm Table to the right of the measurer 2200 mm Cutting length 2500 mm Cutting height 1300 mm Side stop right 1200 mm Side stop left 1200 mm foldable Lodpfxjr H D Tuo Abcjhd motorized grinding unit height-adjustable blade guide Pneumatic blade clamping Info: Little used vertical cutting machine ISM-3 from Bäumer. Simple operation and very reliable machine with state-of-the-art technology The machine is equipped with B-Con (used for remote maintenance by the manufacturer via the Internet) The machine is still in use and can be inspected by appointment. Available immediately Disassembly and transport to be organized by the buyer. Location NRW district of Lippe Further information on request (please only in writing)

Year of construction: 2017, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,250 mm, spindle speed (max.): 6,000 rpm, table load: 15,000 kg, Fully operational condition + regularly serviced by the machine manufacturer The machine was built in 1998. In 2017, the control system was completely renewed for approximately €40,000! TECHNICAL DETAILS Lodpfx Aow N Nnbebcshd X-axis: approx. 5,000 mm Y-axis: approx. 2,500 mm Z-axis: approx. 1,250 mm Control unit: Fidia CXR with handwheel – new from 2017 Clamping table dimensions: approx. 5,600 x 2,740 x 520 mm (cast iron) Table load capacity: max. 15,000 kg T-slots and spacing: 10 x 22H8 / 255 mm Spindle Spindle type: hollow milling spindle with 78/8 flange and locknut Milling spindle power: 8 kW Spindle speed: 6,000 rpm Tool holder: ER40 collet chuck Tool release: manual Note: For approx. €10,000, a spindle upgrade kit can be retrofitted (cables & adapter plate included): Spindle speed: 24,000 rpm Tool holder: HSK63F Power: 10 kW Torque: 8.7 (S1) and 10.5 (S6) A new 6-position tool changer can also be purchased in combination with the spindle upgrade (approx. €4,000). MACHINE DETAILS Connected load: approx. 28 kW Main fuse: 63 A Installation space required: approx. 8,000 x 5,000 x 4,500 mm Total weight: 25,000 kg

Condition: used, Year of construction: 1995, functionality: limited functionality, bar diameter (max.): 75 mm, cnc old machine spindle hole 75 mm Ljdpfx Aeyv Uplobcohd

Condition: new, Year of construction: 2026, Creating a cheap portable or mobile sand making plant involves optimizing costs while maintaining functionality and efficiency. Here's a basic outline of components and considerations for designing a cost-effective portable sand making plant: 1. Portable Sand Making Machine: - Select a cost-effective sand making machine that meets your production requirements. Consider factors like capacity, efficiency, and maintenance costs. - Look for options that offer good performance at a lower initial investment. 2. Screening Equipment: - Choose a portable screening unit to separate the sand into different sizes. This is crucial for producing high-quality sand with the desired particle size distribution. - Consider modular screening units that are easy to transport and set up. 3. Conveyor Systems: - Utilize conveyors to transport raw materials between different components of the plant. Opt for simple and reliable conveyor systems. - Explore cost-effective conveyor options that are easy to maintain. 4. Hopper and Feeder: - Incorporate a hopper and feeder system to ensure a continuous flow of raw materials to the sand making machine. This helps optimize the production process. - Choose a design that minimizes material spillage and wastage. 5. Power Source: - Consider energy-efficient power sources to reduce operational costs. This could include using generators or connecting to the electrical grid, depending on the availability and cost of electricity in your location. 6. Chassis and Mobility: - Opt for a simple and robust chassis design that allows for easy transportation. Depending on your needs, choose between wheels or tracks for mobility. - Aim for a design that facilitates quick setup and dismantling to save time and labor costs. 7. Control System: - Implement a user-friendly control system that enables operators to monitor and adjust the sand making process efficiently. - Consider automation features that enhance control and reduce the need for constant manual intervention. 8. Dust Control and Environmental Considerations: - Integrate effective dust control measures to comply with environmental regulations and ensure a safe working environment. - Explore environmentally friendly features to align with sustainability goals. Lhsdpfx Aeq N Ud Isbcsd 9. Modular Design: - Consider a modular design for easy customization and scalability. This allows you to adapt the plant to varying production needs over time. 10. Used Equipment: - Explore the possibility of using refurbished or used equipment to cut down on initial costs. Ensure that the used equipment is in good working condition and can meet your production requirements. Remember that while cost optimization is important, it's crucial to maintain the quality and efficiency of the sand making process. Additionally, compliance with environmental regulations should be a priority. Always consider the specific requirements of your project and seek professional advice if needed.

Condition: new, Year of construction: 2025, -Tfon Leveltech® S-3513 Leveling Machine. -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results. -Key Specifications: Material Thickness: 0 – 0.3 mm. -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg. Lhedpfx Aokyrzljbcsd

Condition: new, Year of construction: 2025, -TFON Leveltech® XS-3520 Leveling Machine. -The TFON Leveltech® XS-3520 is a compact and efficient leveling solution designed for thin materials and smaller widths. Equipped with advanced electromechanical controls and user-friendly touchscreen operation, it delivers precision leveling with reliable overload protection for enhanced safety -Key Specifications: Material Thickness: 0.3 mm – 5.0 mm. Maximum Material Width: 200 mm Minimum Material Length: 70 mm Flattening Gap Adjustment: Electromechanical / PLC Controlled Overload Protection: Standard Control Interface: Touchscreen HMI Lhjdpfx Aeityvfjbcjd Machine Weight: 2,000 kg Machine Dimensions(L × W × H): 2,225 × 1,595 × 1,850 mm

Condition: new, Year of construction: 2025, -Tfon Leveltech® TF M-5516 Leveling Machine. Engineered for precision leveling, the TF M-5516 efficiently handles material thicknesses from 1 to 15 mm with advanced control features for optimal performance and ease of use -Key Specifications -Material Thickness: 1 – 15 mm -Maximum Material Width: 1,600 mm Minimum Material Length: 110 mm. Quick Change System for Straightening Rollers: Standard Flattening Gap Adjustment: Servo Hydraulic / PC Controlled Ledpfx Abokyrqfscehd Overload Protection: Standard Control Screen: Touchscreen Machine Size (L × W × H): 3,500 × 2,905 × 1,950 mm Total Weight: 19.000 kg.

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series. Models: S-3560, S-3511, S-3513, S-3516. -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation -Material Thickness: 0.3 mm – 5.0 mm. Maximum Material Width. -S-3560: 600 mm -S-3511: 1.100 mm S-3513: 1,300 mm S-3516: (width not specified) Minimum Material Length: 70 mm. Flattening Gap Adjustment: Electromechanical / PLC Controlled. Overload Protection: Standard. Control Screen: Touchscreen Machine Weight: S-3560: 5.000 kg S-3511: 10.000 kg. S-3513: 14.000 kg. Lhedohwb Utopfx Abcjd Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm. S-3511: 2,485 × 1,585 × 1,820 mm. S-3513: 2,695 × 1,585 × 1,820 mm

Condition: new, Year of construction: 2025, -Tfon Bevel Wizard® Linear. -Precision Beveling for Linear & Non-Linear Applications. -The TFON Bevel Wizard® Linear is a high-performance beveling solution designed to deliver exceptional accuracy on both straight and contoured sheet edges. Engineered with flexibility at its core, it features an advanced Trace Tracking System that automatically adjusts to variations in material thickness and geometry—ensuring precise and consistent edge processing even for complex parts. -Key Features 🔹 Advanced Trace Tracking System: Intelligently detects and adapts to diverse edge shapes and contours in real time. 🔹 Wide Beveling Range: Adjustable bevel angles from -30° to +80°, ideal for a broad range of applications. - Optimized for Large Workpieces Capable of processing materials up to 12,000 mm in length and 100 mm in thickness. - Industrial-Grade Durability: Built to last with a solid 10,000 kg frame for long-term reliability. 🔹 Superior Surface Finish: Delivers a high-quality finish with a consistent Emery Band Rotation Speed of 30 m/min and a Ø135 mm contact wheel. -Technical Specifications: Beveling Angle Range: -30° to +80° -Material Thickness: 4 – 100 mm -Minimum Material Width: 250 mm Minimum Material Length: 250 mm Maximum Material Length: 12,000 mm Part Feed Speed: 1.5 – 5 m/min Lhjdpsrt Tpnefx Abced Part Completion Speed: 3 meters/day Maximum Part Indentation: Ø400 mm Emery Band Rotation Speed: 30 m/min Contact Wheel Diameter: Ø135 mm Emery Band Drum Diameter: Ø400 mm Machine Weight: 10,000 kg Engineered for precision. Built for performance. Designed for industrial excellence Tfon Bevel Wizard® Linear — Where Accuracy Meets Efficiency.

Condition: new, Year of construction: 2025, turning diameter over cross slide: 250 mm, turning length: 730 mm, turning diameter: 500 mm, spindle speed (max.): 1,800 rpm, CNC lathe machine CK 6150 with flat bed We offer a new CNC lathe machine model CK6150. We use this machine in our production and you can see it in operation before ordering. The CK 6150 lathe has a flat bed and hardening guides, which ensures a long period of operation of the equipment. The machine is equipped with a CNC system, the GSK CNC system is installed as standard. Optionally, the machine can be equipped with a Fanuc or Siemens CNC system. The machine can have a tool holder for 4-6 or 8 tools, depending on the customer's wishes. It is possible to install a hydraulic chuck on the machine, which will greatly simplify the process of installing parts on it and a hydraulic tailstock. The CK 6150 lathe can be equipped with additional supporting frame for more accurate manufacturing of long parts. Technical specifications: Model CK 6150 x 1000 Maximum workpiece diameter over bed 500 mm Maximum workpiece diameter over support 250 mm Maximum workpiece length 1000 mm Maximum turning length 730 mm Spindle bore diameter 82 mm Spindle speed 150-1800 rpm Engine power 7.5 kW Mechanical chuck (hydraulic optional) Ljdpfx Asxdmgvsbcohd Chuck size 250 mm. 4-position tool holder (6 or 8 optional) Maximum tool size for tool holder 25x25 mm Machine weight 2700 kg Machine dimensions 2650×1700×1820 mm We can also supply lathes CK 6140, CK 6150 and CK 6160 with other dimensions of the working part: CK 6140 dimensions of the working part 550/750 mm CK 6150 dimensions of the working part 1000/1500/2000 mm CK 6160 dimensions of the working part 1000/1500/2000 mm CK 6152E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6165E dimensions of the working part 1000/1500/2000/3000 mm CK 6185E dimensions of the working part 1000/1500/2000/3000/4000 mm CK 61100E dimensions of the working part 1000/1500/2000/3000 mm CK 61125E dimensions of the working part 1000/1500/2000/3000 mm

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine. Lhjdpjkyrphefx Abcod -The TFON Leveltech® is a robust and precise leveling machine designed to handle a wide range of material thicknesses with efficiency and ease. Engineered for reliability and performance, it ensures flat, smooth surfaces on metal sheets and strips to meet stringent quality standards. Key Specifications: -Material Thickness: 1 mm – 30 mm. -Maximum Material Width: 1,600 mm -Minimum Material Length: 145 mm -Quick Change System for Straightening Rollers: Standard -Flattening Gap Adjustment: Servo Hydraulic with PLC Control. -Machine Dimensions (L × W × H): 5,465 × 6,735 × 2,300 mm. -Total Weight: 40.000 kg

Condition: new, Year of construction: 2025, -TFON Leveltech® Leveling Machine Series. -Model: L-9060 -Material Thickness: 1.0 mm – 30.0 mm. -Maximum Material Width: 600 mm. -Minimum Material Length: 145 mm. -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm. Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Lsdpfehwb U Tox Abcehd Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm.