Used Folding Low Pressure Press for sale (46,678)

Condition: used, tank capacity: 3,532 l, GENERAL Construction type: suspended Remarks: 3 feet made of Fe; half-pipe coil around the lower cylinder area; 1 heating connection possibly slightly bent Speed: 313 rpm Outer diameter: 1,800 mm Inner diameter: 1,590 mm Total height: 3,300 mm Heating/cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 100 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Shaft seal: mechanical seal without thermosiphon vessel Agitator: propeller Redoxqa Srspfx Ad Djch Footing type: lug feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,532 liters Jacket volume: 103.0 liters Jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4429 (AISI316) Condition: used Last application: Pharmaceutical chemistry VESSEL Max. vessel operating temperature / °C: 100 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil INSULATION Insulation material: Aluminum EQUIPMENT Manway/dome: in the top (DN 500) Outlet: available Note: dents in insulation jacket, manway cover plated AGITATOR Agitator arrangement: eccentric in the top Agitator equipment: Extensive agitator documentation available

Condition: used, tank capacity: 1,300 l, GENERAL Design: Suspended Remarks: One container is missing the agitator; one container with insulation; 2 mounting brackets made of V2A (contact surface reversed); some flanges made of Fe (see photos) Speed: 571 rpm Internal diameter: 990 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Heating/Cooling: Available Redpjxqa Sfofx Ad Djch Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: Bolted lid Agitator: Propeller Base type: Lugs (Mounting feet) Location: Bremen Technical documentation: Drawing Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,300 litres Double jacket volume: 23.0 litres Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: Used Cylindrical height: 1,330 mm Previous application: Pharmaceutical chemistry TANK Max. operating temperature (tank) / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Outlet: DN80 flange Note: Minor residues present MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Agitator arrangement: Eccentrically mounted on the top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 3 mm Top cover wall thickness: 4.1 mm

Condition: used, tank capacity: 2,765 l, GENERAL Design: suspended Remarks: Exterior of vessel sand-blasted and primed; double jacket bolted to bottom head (see photos); 4 support brackets made of steel; exterior surface partially corroded (may require repair) Rotational speed: 167 rpm Internal diameter: 1,400 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 3,350 mm Heating/Cooling: available Power: 2.6 kW Max. permissible operating temperature: 150 °C Max. permissible operating pressure: 3.0 bar Max. overpressure: 6.0 bar Agitator: propeller type Mounting type: support brackets Location: Bremen Technical documentation: drawing, TÜV certificates Nameplate: Vacuum: 1.0 bar Volume: 2,765 liters Double jacket volume: 42.0 liters Cylinder wall thickness: 7 mm Double jacket material: V2A 1.4541 (AISI304) Product-contact material: V4A 1.4571 (AISI316) Condition: used Rsdpfsxqa R Ujx Ad Djch Cylindrical height: 1,390 mm Previous use: chemical industry VESSEL Max. operating temperature (vessel) / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: double jacket EQUIPMENT Outlet: flange DN80 Note: slight residues present AGITATOR Agitator manufacturer: Ekato Voltage: 500 V Current disruptor: Agitator arrangement: centered, top-mounted TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 7 mm Top wall thickness: 9 mm

Condition: used, tank capacity: 2,750 l, GENERAL Design: suspended Notes: Support ring Fe; manhole davit bent Speed: 323 rpm Inner diameter: 1,390 mm Ex-protected: Motor is ex-protected (compliance with the applicable ATEX directives under local conditions must be checked) Total height: 3,150 mm Heating/Cooling: present Power: 2.6 kW Max. permissible operating temperature: 200 °C Max. permissible operating pressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: propeller Rcedpfx Adoxqa R Io Djh Base type: ring Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,750 liters Double jacket volume: 62.0 liters Product-contacting material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,380 mm Last application: pharmaceutical chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in the top (DN 500) Outlet: flange DN100 Note: manhole cover plated MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI304) AGITATOR Voltage: 220/380 Volt Agitator arrangement: eccentric in the top

Condition: used, tank capacity: 2,500 l, GENERAL Features: Crane lugs Design: suspended Notes: Support ring made of Fe; minor dents in the insulation jacket; manway cover partially plated; manway diameter 490 mm Speed: 307 rpm Outer diameter: 1,880 mm Inner diameter: 1,590 mm Explosion protection: Motor is explosion-proof (compliance with applicable ATEX regulations under local conditions must be verified) Total height: 3,250 mm Heating/cooling: available Insulation: available Power: 1.1 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: propeller Redpfsxqa Rzox Ad Doch Base type: ring Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Vacuum: 1.0 bar Volume: 2,500 liters Double jacket volume: 180.0 liters Product-contact material: V4A 1.4435 (AISI 316) Condition: used Cylindrical height: 1,380 mm Previous use: chemical industry VESSEL Max. operating temperature of vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation jacket material: aluminum EQUIPMENT Manway / Dome: on top head Outlet (alternative entry): 130 mm Note: slight adhesions MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 220/380 Volt Interference suppressor: Agitator arrangement: centered in top head

Condition: used, tank capacity: 1,345 l, GENERAL INFORMATION Design: Suspended Remarks: 2 support brackets made of V2A (contact surface reversed; see photos); some flanges made of Fe; heating connections have been cut off; minor metal cutouts in the insulation jacket Speed: 313 rpm Outer diameter: 1,250 mm Inner diameter: 1,000 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 2,950 mm Heating/Cooling: provided Insulation: provided Power: 1.1 kW Max. permissible operating temperature: 200°C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: bolted lid Agitator: Propeller Support type: Support brackets Location: Bremen Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,345 liters Double jacket volume: 24.0 liters Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,360 mm Previous use: Pharmaceutical chemicals TANK Max. operating temperature tank / °C: 200°C HEATING/COOLING JACKET Bottom temperature control: Half-pipe coil INSULATION Insulation jacket material: Aluminum EQUIPMENT Outlet: Flange DN80 Note: slight residues, dents on the insulation jacket MATERIAL CONSTRUCTION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR Voltage: 220/380 Volt Rodpfxexqa N Ro Ad Djch Agitator configuration: eccentric in top cover

Condition: used, Year of construction: 2001, tank capacity: 280 l, GENERAL Equipment: Control cabinet (without guarantee) Design: standing Year of manufacture: 2001 Remarks: max. permissible temperature in test certificate: -10/+120°C; vessel drawing in JPEG format and installation drawing available Rodpfsxqa Nkox Ad Doch Speed: 339 rpm Outer diameter: 900 mm Inner diameter: 740 mm Total height: 2,100 mm Heating/Cooling: available Insulation: available Power: 0.55 kW Max. permissible operating temperature: 130°C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.5 bar Top cover: removable / hinged Agitator: magnetic stirrer Support design: mobile on castors Location: Bremen Technical documentation: acceptance certificate Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 280 liters Double jacket volume: 28.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 630 mm Last application: Pharmaceuticals VESSEL Max. operating temperature vessel / °C: 130°C Number of feet: 4 pcs HEATING/COOLING JACKET Max. permissible negative operating pressure double jacket / tube space / bar: 1.0 bar Bottom temperature control: double jacket INSULATION Insulating jacket: hermetically welded Insulating jacket material: stainless steel EQUIPMENT Outlet: available MATERIAL CHARACTERISTICS Outer surface: ground Inner surface: ground Foot material: stainless steel AGITATOR Voltage: 230/400 V Agitator position: bottom

Condition: used, tank capacity: 1,500 l, GENERAL Features: Evacuation/Aeration, butterfly valve Design: vertical Remarks: Height-adjustable cap screws for the feet are missing; hand lever for the butterfly valve is missing; manway cover is not suitable for an operating pressure of 2 bar (the tank was most likely operated unpressurized by the previous owner and thus the cover was replaced accordingly) Outer diameter: 1,300 mm Inner diameter: 1,150 mm Total height: 2,700 mm Heating/Cooling: present Insulation: present Max. permissible operating temperature: 20 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 2.0 bar Agitator: agitator flange Support type: feet Location: Bremen Redpfx Adsxqa Its Dech Cylinder temperature control: half-pipe coil Nameplate: Volume: 1,500 litres Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 1,550 mm Last application: dairy TANK Max. operating temperature tank / °C: 120 °C Bottom: flat bottom with slope Number of feet: 3 units HEATING/COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel FEATURES Manway / dome: on top (Ø 430) Outlet: DN65 DIN 11851 Note: dents on the insulation jacket, functionality of the double jacket not tested MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator arrangement: off-centre on top

Condition: used, Year of construction: 2015, tank capacity: 400 l, GENERAL Features: Spray head, lifting lugs Design: vertical Year of manufacture: 2015 Remarks: Discharge fitting incomplete (see photos); Technical documentation is available from the manufacturer and can be requested and purchased from them Speed: 377 RPM Outer diameter: 910 mm Inner diameter: 770 mm Total height: 1,830 mm Heating/Cooling: available Insulation: available Power: 0.55 kW Redpfx Adsxqa Hvj Doch Max. permissible operating temperature: 165°C Max. permissible operating overpressure: 4.0 bar Max. overpressure: 3.0 bar Top cover: removable / hinged top cover Agitator: magnetic stirrer Support: feet Location: Bremen Cylinder temperature control: Thermoplate Nameplate: Vacuum: 1.0 bar Volume: 400 liters Jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Last application: pharmaceuticals VESSEL Max. operating temperature vessel / °C: 165 °C Number of feet: 3 pieces HEATING/COOLING JACKET Max. permissible operating vacuum (jacket/tube space): 1.0 bar Bottom temperature control: Thermoplate INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet (alternative entry): available mm MATERIAL QUALITY Outer surface: polished Inner surface: polished Foot material: stainless steel AGITATOR Agitator manufacturer: Millipore Voltage: 230/400 Volt Agitator arrangement: bottom-mounted

Condition: used, tank capacity: 5,400 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; half-pipe coil not shown in vessel drawing Speed: 450 RPM Internal diameter: 1,800 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 3,700 mm Heating/cooling: Available Power: 3.6 kW Max. overpressure: 6.0 bar Seal: Mechanical seal with thermosyphon vessel Agitator: Propeller Base design: Ring Location: Bremen Technical documentation: Drawing, acceptance certificate Cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 5,400 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4571 (AISI 316) Condition: Used Cylindrical height: 1,690 mm Last application: Chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING / COOLING JACKET Bottom temperature control: Half-pipe coil EQUIPMENT Manway / Dome: In top head (DN 500) Outlet: Flange DN100 Remark: Light residues MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI 304) AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 Volt Bottom bearing: Rcjdpsxqa Dnefx Ad Djh Agitator arrangement: Eccentrically in top head Agitator equipment: Extensive documentation available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8 mm Top wall thickness: 16 mm

Condition: used, tank capacity: 568 l, GENERAL Rcodoxqa Dhjpfx Ad Deh Equipment: Control cabinet (without guarantee) Construction type: standing Outer diameter: 900 mm Inner diameter: 810 mm Total height: 1,830 mm Heating/cooling: available Max. permissible operating temperature: 134 °C Max. permissible operating overpressure: 2.0 bar Max. overpressure: 2.0 bar Top cover: removable / hinged top cover Agitator: agitator flange Design: mobile on castors Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 568 liters Double jacket volume: 108.0 liters Product contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 850 mm Previous application: pharmaceutical TANK Max. operating temperature of tank / °C: 134 °C Number of legs: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket FEATURES Outlet (alternative entry): 23 mm Note: scratches on inner surface MATERIAL FINISH Exterior surface: polished Interior surface: ground Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator position: offset in the top cover

Condition: used, tank capacity: 5,500 l, GENERAL Equipment: crane lugs Design: upright Remarks: Dents in the insulation jacket possible; manufacturing and documentation drawings are available from the manufacturer and can be purchased separately. Speed: 429 rpm Outer diameter: 1,890 mm Inner diameter: 1,680 mm Total height: 3,500 mm Heating/Cooling: available Insulation: available Power: 2.2 kW Max. allowable operating temperature: 140 °C Max. allowable operating overpressure: 2.5 bar Max. overpressure: 2.5 bar Agitator: propeller Base: height-adjustable feet Location: Bremen Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 5,500 liters Double jacket volume: 154.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contacting material: V4A 1.4571 (AISI316) Condition: used Last application: brine VESSEL Max. vessel operating temperature / °C: 140 °C Number of feet: 3 pcs HEATING/COOLING JACKET Max. allowable vacuum (double jacket/tube space) / bar: 1.0 bar Bottom temperature control: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Rcodsxqazaepfx Ad Doh Manhole/Dome: in the top (DN 400) Outlet (alternative): 38 mm Note: slight residues, outlet pipe cut off MATERIAL SPECIFICATION Feet material: stainless steel AGITATOR Agitator manufacturer: PRG Voltage: 230/400 Volt Agitator arrangement: bottom-mounted

Condition: used, tank capacity: 120 l, GENERAL Construction: Vertical Remarks: Mobile frame made of V2A; clamping ring for the lid is missing Outer diameter: 500 mm Inner diameter: 400 mm Total height: 1,200 mm Heating/Cooling: available Max. allowable operating temperature: 15 °C Max. allowable operating overpressure: 1.0 bar Max. overpressure: 1.5 bar Top: Removable / Hinged lid Agitator: Magnetic stirrer Rcodpfx Adoxqay Ne Doh Support type: Mobile frame Location: Bremen Cylinder temperature control: Double jacket Nameplate: Volume: 120 liters Double jacket volume: 16.0 liters Double jacket material: V2A 1.4301 (AISI304) Product-contact material: V4A 1.4435 (AISI316) Condition: Used Cylindrical height: 750 mm Last application: Pharmaceutical CONTAINER Max. operating temperature container / °C: 130 °C EQUIPMENT Outlet (alternative entry): 35 mm MATERIAL SPECIFICATION Outside surface: Ground Inside surface: Polished AGITATOR Agitator position: Bottom-mounted Agitator equipment: Motor/Gear unit for magnetic stirrer is not included

Condition: used, tank capacity: 313 l, GENERAL INFORMATION Design: vertical Remarks: Chassis made of V2A stainless steel (the control cabinet housings visible in the photos are empty); minor dents inside the tanks; top plates made of V2A (suspensions and fastening screws for the top plates are missing) Outer diameter: 730 mm Inner diameter: 620 mm Total height: 1,600 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Top cover: removable / lift-up top cover Agitator: agitator flange Mounting type: mobile frame Location: Bremen Cylinder tempering: double jacket Nameplate: Rsdpfxjxqayve Ad Dsch Volume: 313 litres Double jacket volume: 15.0 litres Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 830 mm Previous application: pharmaceuticals TANK Max. operating temperature / °C: 143 °C HEATING/COOLING JACKET Base tempering: double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Outlet (alternative entry): 45 mm Note: outlet cut off, metallic discolorations inside MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Tempering system material: V2A 1.4301 (AISI304) AGITATOR Flow breaker: Agitator arrangement: bottom-mounted Agitator equipment: One tank is still equipped with a magnetic agitator; motor/gearbox units are no longer present

Condition: used, tank capacity: 3,860 l, GENERAL Equipment: Lifting lugs Design: suspended Remarks: Support ring, Fe; manhole cover incomplete (see photos) Speed: 61 RPM Outer diameter: 2,090 mm Rcodjxqaxlopfx Ad Dsh Inner diameter: 1,800 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 3,050 mm Heating/Cooling: present Insulation: present Power: 4 kW Max. permissible operating temperature: 200 °C Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Agitator: paddle agitator Base type: ring Location: Bremen Technical documentation: drawings, various documents Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 3,860 liters Double jacket volume: 136.0 liters Cylinder wall thickness: 6 mm Product-contact material: V4A 1.4435 (AISI316) Condition: used Previous application: pharmaceutical chemistry VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. permissible operating vacuum double jacket / pipe chamber / bar: 1.0 bar Bottom temperature control: half-pipe coil INSULATION Insulation jacket: riveted Insulation jacket material: aluminum FEATURES Manhole / dome: on the top head (DN 600) Outlet: present Remark: dents on the insulation jacket, manhole cover plated MATERIAL SPECIFICATION Temperature control system material: AISI 304 (V2A) 1.4306 AGITATOR Voltage: 400/690 Volt Agitator arrangement: centrally mounted on top head Agitator specification: gearbox housing slightly damaged in one area (see photos) TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 5.17 mm Top wall thickness: 8.14 mm

Condition: used, tank capacity: 2,500 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: 4 feet made of V2A; manway cover fastening bolts incomplete; 1 former connection in the top head was welded shut by the previous operator Internal diameter: 1,390 mm Rcjdexqaw Ispfx Ad Dsh Overall height: 3,000 mm Heating/Cooling: available Max. permissible operating temperature: 190 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 1.0 bar Agitator type: paddle agitator Agitator mounting: agitator flange Base type: feet Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,500 liters Jacket volume: 35.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 1,500 mm Last intended use: chemicals VESSEL Max. operating temperature vessel / °C: 190 °C HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in upper head (DN 500) Outlet: flange DN50 Note: light residues, motor/gearbox missing MATERIAL SPECIFICATION Temperature control system material: V2A 1.4541 (AISI304) AGITATOR Agitator manufacturer: Ekato Baffle: Agitator arrangement: eccentric in top head AGITATOR 2 Agitator arrangement: side-mounted on cylinder TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4.6 mm

Condition: used, tank capacity: 5,000 l, GENERAL Equipment: Ball valve Design: Suspended Remarks: Top cover made of V2A (1.4301); 4 support lugs made of Fe; Slight material erosion inside the tank Internal diameter: 1,880 mm Total height: 3,550 mm Heating/Cooling: available Max. permissible operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Top cover: removable / hinged Agitator: beam agitator Stand design: support lugs Location: Bremen Cylinder temperature control: half-pipe coil Name plate: Volume: 5,000 liters Cylinder wall thickness: 10.2 mm Rcedpfx Adsxqawuo Djh Product-contacting material: V4A 1.4429 (AISI316) Condition: used Cylindrical height: 1,580 mm Last application: chemicals HEATING/COOLING JACKET Bottom temperature control: half-pipe coil EQUIPMENT Manhole / dome: in top cover (Ø 450) Outlet: DN40 DIN 11851 Note: slight residues, motor/gearbox missing MATERIAL SPECIFICATION Top cover material: AISI304 (V2A) 1.4301 Temperature control system material: V2A 1.4301 (AISI304) Flange material: steel AGITATOR Agitator manufacturer: Fluid Agitator position: centrally in top cover TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 8.3 mm Top cover wall thickness: 4.5 mm

Condition: used, Year of construction: 2016, tank capacity: 6,000 l, GENERAL Equipment: Crane lugs Design: vertical Year of manufacture: 2016 Remarks: Manhole DN 600; outlet with bolted fitting; no indication of double-jacket inspection approval in the test report (in a drawing copy of drawing 1160246-1A or 1B, the signed stamp "Tested according to AD 2000 regulations by TÜV Süd" is present); parts of blind plugs may be available Speed: 495 rpm External diameter: 2,100 mm Internal diameter: 2,000 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Overall height: 2,630 mm Heating/cooling: available Insulation: available Max. permissible operating temperature: 135 °C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: Magnetic agitator Support design: feet Location: Bremen Technical documentation: drawing, TÜV documents, static calculation, CE marking and declaration of conformity, operating manual Cylinder temperature control: Thermoplate Nameplate: Vacuum: 1.0 bar Volume: 6,000 liters Cylinder wall thickness: 6 mm Product contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,400 mm Last intended use: pharmaceuticals TANK Max. operating temperature vessel / °C: 135 °C Number of feet: 4 pcs HEATING / COOLING JACKET Bottom temperature control: Thermoplate INSULATION Insulation jacket: hermetically welded Insulation material: Armaflex Insulation jacket material: stainless steel Insulation thickness / mm: 50 mm EQUIPMENT Manhole / dome: in the cylinder Outlet (alternative entry): 187 mm MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Feet material: stainless steel AGITATOR Agitator manufacturer: Metenova AB Voltage: 400 Volt Redpjxqawnefx Ad Doch Agitator arrangement: bottom-mounted TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm Top wall thickness: 5.8 mm

Condition: used, Year of construction: 2019, tank capacity: 1,000 l, GENERAL INFORMATION Design: upright Year of manufacture: 2019 Rcjdpfx Ajxqawbjd Deh Speed: 711 rpm Outer diameter: 1,120 mm Inner diameter: 1,000 mm Explosion-proof: Motor is explosion-proof (compliance with applicable ATEX directives under local conditions must be verified) Total height: 2,100 mm Heating/Cooling: present Insulation: present Max. permissible operating temperature: 135°C Max. permissible operating overpressure: 6.0 bar Max. overpressure: 3.0 bar Agitator: magnetic stirrer Support type: mobile on castors Location: Bremen Technical documentation: drawing, various documents, acceptance certificate, CE marking and declaration of conformity, operating manual Cylinder temperature control: thermoplate Nameplate: Vacuum: 1.0 bar Volume: 1,000 liters Double jacket volume: 5.0 liters Cylinder wall thickness: 5 mm Product-contact material: V4A 1.4401/04 (AISI316) Condition: used Cylindrical height: 1,000 mm Previous application: pharmaceuticals TANK Max. tank operating temperature / °C: 135°C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: thermoplate INSULATION Insulation jacket: hermetically welded Insulation material: mineral wool Insulation jacket material: stainless steel EQUIPMENT Manway / dome: on top head (DN 600) Outlet (alternative entry): 31 mm MATERIAL SPECIFICATION Temperature control system material: AISI 316 (V4A) 1.4404 Feet material: stainless steel AGITATOR Agitator manufacturer: Metenova AB Voltage: 400 Volt Agitator arrangement: bottom-mounted TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 4 mm Top wall thickness: 5 mm

Condition: used, tank capacity: 2,420 l, GENERAL Equipment: crane lugs Design: suspended Remarks: Manway DN 350/450 (sight glass in manway cover is missing); support ring made of Fe; flanges partially made of Fe Speed: 235 rpm Internal diameter: 1,400 mm Explosion protection: Motor is explosion-proof (compliance with current ATEX directives under local conditions must be verified) Total height: 3,550 mm Heating/Cooling: available Power: 4 kW Max. allowable operating temperature: 200°C Max. allowable operating overpressure: 16.0 bar Max. overpressure: 3.2 bar Upper head: upper head removable/top-hinged Agitator: inclined blade agitator Base design: ring Location: Bremen Technical documentation: drawing Cylinder tempering: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 2,420 liters Double jacket volume: 100.0 liters Product-contact material: V4A 1.4435 (AISI316) Condition: used Cylindrical height: 1,180 mm Previous use: pharmaceutical chemistry TANK Max. tank operating temperature / °C: 200°C HEATING/COOLING JACKET Max. allowable vacuum in double jacket / pipe space / bar: 1.0 bar Bottom tempering: half-pipe coil EQUIPMENT Manway / dome: on the upper head Outlet (alternative input): 130 mm MATERIAL SPECIFICATION Tempering system material: AISI 304 (V2A) 1.4306 AGITATOR Agitator manufacturer: Ekato Voltage: 400/690 Volt Current interrupter: Agitator arrangement: central on upper head Agitator configuration: agitator drive was controlled by external frequency converter (no longer present) at the previous owner, likely within 30 - 150 rpm Rsdpfxexqav Rs Ad Djch TECHNICAL DATA / DIMENSIONS Upper head wall thickness: 7 mm

Condition: used, tank capacity: 1,358 l, GENERAL Design: vertical Remarks: 3-legged base frame made of stainless steel with components made of mild steel; minor dents in the insulation jacket; fastening knob for the manway cover is missing External diameter: 1,420 mm Internal diameter: 1,280 mm Total height: 2,150 mm Heating/Cooling: present Insulation: present Max. permissible operating temperature: 143 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 0.5 bar Agitator: agitator flange Support design: frame Location: Bremen Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 1,358 liters Double jacket volume: 40.0 liters Product-contact material: V4A 1.4571 (AISI316) Condition: used Last previous use: food TANK Max. operating temperature tank / °C: 100 °C HEATING/COOLING JACKET Temperature control bottom: half-pipe coil INSULATION Insulation jacket: welded Insulation jacket material: stainless steel EQUIPMENT Rcjdpexqavwjfx Ad Djh Manway / dome: in the top head (DN 400) Outlet: DN50 DIN 11851 MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) AGITATOR Agitator arrangement: eccentric in the top head

Condition: used, tank capacity: 259 l, GENERAL Equipment: Ball valve Design: vertical Notes: Handhole diameter 200 mm; minor dents in the insulation jacket Speed: 71 - 640 rpm Outer diameter: 830 mm Inner diameter: 690 mm Explosion-proof: Motor is explosion-proof (compliance with current ATEX regulations under local conditions must be verified) Total height: 2,000 mm Heating/Cooling: available Insulation: available Power: 0.34 kW Max. permissible operating temperature: 142 °C Max. permissible operating overpressure: 3.0 bar Max. overpressure: 3.0 bar Top cover: Removable / hinged top cover Agitator: Propeller Base configuration: mobile on castors Location: Bremen Cylinder temperature control: Double jacket Nameplate: Vacuum: 1.0 bar Volume: 259 liters Double jacket volume: 18.0 liters Product contact material: V4A 1.4571 (AISI316) Condition: used Cylindrical height: 470 mm Last intended use: Pharmaceuticals TANK Max. operating temperature tank / °C: 142 °C Number of legs: 4 pcs HEATING / COOLING JACKET Lower head temperature control: Double jacket INSULATION Insulation jacket: hermetically welded Insulation jacket material: stainless steel EQUIPMENT Rsdpfxjxqavks Ad Djch Manhole / dome: Handhole Outlet: available MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Leg material: stainless steel AGITATOR Voltage: 220/380 volts Agitator arrangement: eccentric in top cover Agitator equipment: Output adjustable via handwheel

Condition: used, tank capacity: 8,651 l, GENERAL Equipment: Crane lugs Design: suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; total height incl. agitator gearbox (without gearbox approx. 3500 mm); Speed: 26.5 / 118 rpm Rcodpfx Ajxqavdod Doh Internal diameter: 2,000 mm Total height: 4,550 mm Heating/Cooling: present Power: 5 / 15 kW Max. allowable operating temperature: 220 °C Max. allowable operating overpressure: 20.0 bar Max. overpressure: 6.0 bar Agitator: beam agitator Support type: ring Location: Bremen Technical documentation: Drawing Cylinder temperature control: half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,651 liters Jacket volume: 313.0 liters Cylinder wall thickness: 8 mm Product-contact material: V2A 1.4541 (AISI321) Condition: used Last application: chemicals VESSEL Max. operating temperature vessel / °C: 200 °C HEATING/COOLING JACKET Max. allowable operating vacuum jacket / pipe space / bar: 1.0 bar Bottom temperature control: half-pipe coil EQUIPMENT Manway / dome: in the top head Outlet (alternative entry): 105 mm Remark: Motor missing, manway cover plated MATERIAL SPECIFICATION Temperature control system material: V4A 1.4571 (AISI316) Flange material: steel AGITATOR Agitator arrangement: centrally in top head Agitator equipment: Agitator type: frame blade agitator; agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top head wall thickness: 14 mm

Condition: used, tank capacity: 8,609 l, GENERAL Equipment: Crane lugs Design: Suspended Remarks: Support ring made of Fe; manway diameter approx. 480 mm; internal vessel with signs of corrosion (see photos); total height incl. agitator gearbox (approx. 3,400 mm without gearbox); Speed: 52 / 104 rpm Internal diameter: 2,000 mm Total height: 4,950 mm Heating/cooling: available Max. allowable operating temperature: 220°C Max. allowable operating pressure: 20.0 bar Max. overpressure: 6.0 bar Top head: Removable/openable top cover Agitator: Paddle agitator Base type: Ring Location: Bremen Technical documentation: Drawing Jacketed cylinder temperature control: Half-pipe coil Nameplate: Vacuum: 1.0 bar Volume: 8,609 liters Jacket volume: 313.0 liters Rcedpfoxqau Tjx Ad Doh Cylinder wall thickness: 8 mm Product-contact material: V4A 1.4571 (AISI316) Condition: Used Cylindrical height: 2,190 mm Last application: Chemical VESSEL Max. vessel operating temperature / °C: 200°C HEATING/COOLING JACKET Max. allowed operating vacuum double jacket / pipe space / bar: 1.0 bar Bottom temperature control: Half-pipe coil EQUIPMENT Manway / dome: in top cover Outlet (alternative entry): 100 mm Note: Motor missing, manway cover missing MATERIAL SPECIFICATION Temperer system material: V4A 1.4571 (AISI316) Flange material: Steel AGITATOR Agitator manufacturer: Ekato Agitator equipment: Agitator type: Paddle frame agitator; Agitator motor missing, but available from manufacturer; various agitator documents available TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 10 mm Top cover wall thickness: 14 mm

Condition: used, tank capacity: 11,424 l, GENERAL Equipment: Spray head, crane lugs Design: vertical Remarks: Double jacket with sprinkle ring – suitable only for non-pressurized temperature control; dents in the double jacket; partial detachment of the double jacket cladding in the area of the top head (see photos) Speed: 55 / 112 rpm Outer diameter: 2,140 mm Inner diameter: 2,000 mm Total height: 4,500 mm Heating/Cooling: available Power: 1.5 / 2.2 kW Max. overpressure: 3.2 bar Agitator: propeller Mounting: adjustable feet Location: Bremen Technical documentation: drawing available Cylinder temperature control: double jacket Nameplate: Vacuum: 1.0 bar Volume: 11,424 liters Cylinder wall thickness: 6 mm Product-contact material: V2A 1.4301 (AISI304) Condition: used Cylindrical height: 3,000 mm Previous application: dairy TANK Max. operating temperature tank / °C: 145 °C Number of feet: 4 pcs HEATING/COOLING JACKET Bottom temperature control: double jacket FEATURES Manway / dome: in top head (Ø 450 mm) Outlet (alternative entry): 48 mm Note: slight residues present, outlet pipe cut off MATERIAL SPECIFICATION Temperature control system material: V2A 1.4301 (AISI304) Legs material: stainless steel Rcodpfx Aexqau Hsd Deh AGITATOR Voltage: 380 Volt Agitator arrangement: side-mounted on cylinder TECHNICAL DATA / DIMENSIONS Bottom wall thickness: 6 mm