Used Follower Rest for sale (4,674)

Condition: new, empty load weight: 7,400 kg, maximum load weight: 42,000 kg, axle configuration: 3 axles, suspension: air, Year of construction: 2026, load capacity: 34,600 kg, • Coupling height 1200 mm • Front wall 2.40 m Nkodoyv R R Sepfx Ah Rjw • 20 aluminium stakes 2.50 m • Solid KAPUR floor 34 • Perforated UPN 160 side rail • 1st axle liftable • Spare wheel holder • PVC toolboxes • Longitudinal mesh rack 2.65 m • 12 lashing rings 2T per side • Smartboard • LED work lights • Towing eye

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 3,156 h, load capacity: 1,400 kg, lifting height: 8,600 mm, free lift: 2,840 mm, fuel type: electric, mast type: triplex, construction height: 3,400 mm, fork length: 1,150 mm, drive type: Elektro, Reach truck Load centre: 600 Mast type: Triplex Condition: Refurbished without warranty Technical condition: Very good Front tyre type: Vulkollan Nsdsxnfgijpfx Ah Rekw Front tyre condition: 80 - 100% Rear tyre type: Vulkollan Rear tyre condition: 80 - 100% Battery voltage: 48V Battery capacity: 620Ah Battery manufacturer: Overhauled and tested Battery type: PzS Battery year: 2020 Battery condition: 80 - 100% Description: Condition: Refurbished, serviced and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked - without any warranty. Subject to prior sale. Documentation: Operating manual and inspection logbook. Rental - including long-term rental - available at attractive conditions! Please contact us. Sale to commercial customers only (no warranty). Interim sale and rental reserved. Our general terms and conditions apply. The offered price is plus statutory VAT. Sideshift, Fork positioner

Condition: excellent (used), Year of construction: 2005, Our Polly Prestige 674+L machine for sale! Features: Year of manufacture: 2005 6 printing units and one varnishing unit Max paper size: 520 x 740 mm (B2) Number of impressions: 55 million Alcohol dampening Technotrans system High delivery and non-stop feeder Graficontrol (register, ink zone, dampening) Autoplate Washer (ink rollers) Grafix IR dryer Powder spray system Techkon densito connected to the control panel CIP 4 system Supplied with plate punch and bender Njdpfxoyparde Ah Rokw The machine has not been in production for a year; according to my tests, the rubber rollers are in 60% condition. The cylinders are undamaged. Testing is possible; however, there is no longer staff or auxiliary materials for printing, so only a paper-feed test is available. The machine is located in Hungary.

Condition: used, Automatic Platen Die Cutter Joh. Cietz PRESTO Halbautomatischer Stanztiegel / Automatic Platen Die Cutter Joh. Cietz PRESTO Nodpfeylqd Ajx Ah Rekw Year 2008 - Serial-No. EP51568 Format 370 x 480mm Weight 1100kgs Included frame and tools Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: good (used), machine/vehicle number: 3249, Year of construction: 2024, load capacity: 20,000 kg, Seacom TRESTLE 20T from Uniktruck Nksdpjyuh T Tsfx Ah Row

Condition: good (used), machine/vehicle number: 3248, total length: 1,020 mm, total width: 2,830 mm, Year of construction: 2024, operation weight: 1,100 kg, load capacity: 20,000 kg, Seacom TRESTLE 20T from Uniktruck Nkodpfxeyuh T Hs Ah Rew

Condition: excellent (used), functionality: fully functional, mileage: 7,60,000 km, first registration: 06/2008, fuel type: diesel, fuel: diesel, color: white, emission class: euro5, Year of construction: 2008, Equipment: ABS, EBS, air conditioning, airbag, fog lights, full service history, retarder, spoiler, tachograph, DAF CF 85-410 Nkjdpfx Ahjyrttao Rjw Tractor unit 2 axles 4x2 Year 06/2008 Diesel Euro 5 300 kW (408 HP) 16-speed ZF manual gearbox Retarder Air conditioning Webasto auxiliary heating Spoiler Sun visor Electric mirrors and windows Tyre size: 315/70 R 22.5 70% tyres remaining 760,000 km Good working condition.

Condition: good (used), functionality: fully functional, roll diameter: 50 mm, total width: 8,900 mm, total length: 1,300 mm, input voltage: 24 V, axle spacing: 75 mm, working width: 660 mm, Features: Condition: Fully functional, with signs of use Ideal for fast material transport Professionally dismantled and packaged Pass-through Flap / Lowerable Gate / Flap Element Manufacturer: Interroll Condition: Good (Used) Model: Roller - with drive / Drive rollers / 24V technology Total width incl. feet: approx. 890 mm Conveying width: approx. 660 mm Total length: approx. 1300 mm Minimum height of top edge of roller: approx. 700 mm Nkjdpfxorbmfts Ah Row Axle spacing: approx. 75 mm Roller diameter: approx. 50 mm Stock: 9 units Price per unit The conveyor system was operational until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under heavy loads. Tailored solutions for your intralogistics We are your competent partner for roller conveyors, belt conveyors, inclined conveyors, or telescopic conveyors for loading and unloading your goods! We are happy to provide you with an individual offer or advise you on design or assembly questions. Simply let us know your requirements and the local conditions. Benefit from our many years of experience and extensive network of professionals. We have successfully implemented projects for companies in various industries such as logistics, the pharmaceutical industry, trades, or the electronics sector. Together, we will find ways to optimize your processes and material flow cost-effectively and sustainably. We can also offer fully automated sorting systems or complementary components such as picking racks or containers.

Condition: defective spare-parts repository (used), functionality: not functional, fuel type: diesel, fuel: diesel, brakes: intarder, color: white, suspension: parabolic leaf (spring), Year of construction: 2009, Equipment: ABS, EBS, air conditioning, airbag, fog lights, retarder, spoiler, tachograph, DAF XF 105-460 SSC Road Tractor 2 Axles 4x2 Year 2009 Cab with 2 beds Automatic transmission Retarder Air conditioning Webasto ABS Euro 5 PTO (power take-off) Spoiler Tire size: 315/80 R 22.5 Njdpfx Aoych S Ejh Rokw 80% tires ENGINE DAMAGED.

Year of construction: 2020, condition: ready for operation (used), A complete digital dental laboratory with extensive spare parts inventory and KaVo 5-axis machines is available. 1) 3x 5-axis dental milling machines KaVo Everest, travel path X/Y/Z: 250mm/100mm/70mm, A-axis: 360°, B-axis: 240°, tool positions: 2, speed: 80000rpm, machine dimensions X/Y/Z: approx. 900mm/1200mm/850mm, weight: approx. 300kg. Including 3x computers, Cam2 license dongle and 3x machine tables. 2) 2x furnaces, one as spare parts storage. 3) Machine crane. 4) Saw for plastic blanks for bar separation. 5) Various blanks from zirconia to plastic. 6) Various accessories, spare parts, documentation, service case and cabinets. This is a completely functional and operational dental prosthetics manufacturing workshop. Documentation available. An on-site inspection is possible. Nkodpfx Ahjyn Nzls Row

Year of construction: 1998, condition: like new (used), machine/vehicle number: 91.06243, 4 compact-double-feeder, type MM 1551, 1 cover-feeder, type MM 1528, With creasing-system, Stitching-station, type MM 1550, 2 standard-stitching-heads and also with loop, Trimmer type MM 1522, Extra belt-delivery Model 1511, 2 compressors, Extra knife set. Machine nr: 91.06243 Njdpfxogt E I Ej Ah Rskw

Condition: used, overall weight: 4,500 kg, axle configuration: 2 axles, first registration: 05/1999, loading space length: 3,547 mm, loading space width: 1,740 mm, loading space height: 40 mm, The trailer has been completely repainted and fitted with new tires, bodywork renewed! - Unladen weight: 1,120 kg - Ramps - 40 mm towing eye - DuoMatic air connection - Lashing points - Tire size: 205/R14C - Technical gross weight: 4,500 kg - Own weight: 1,120 kg - Overall length: 5,460 mm Njdpfx Asyl Rgqjh Rekw Vehicle number: 11703 Errors and prior sale excepted. Advertising and various lettering have been digitally removed. We are happy to assist you with all formalities arising from the purchase of a vehicle. Just let us know your requests and suggestions, and we will take care of them. Among other things, we can offer you the following services for an additional fee: - Trade-in of your old vehicle - TÜV / safety inspection - Complete export processing - Financing mediation - Application for export license plates - Vehicle delivery - Vehicle registration - Recovery and vehicle transport Your VTS Team

Condition: ready for operation (used), 1 x stitching unit 1550 2 x stitching heads HK75            ONLY 3,800 hours 1 x SEMKO side caliper with reject 6 x section feeders 1551 1 x cover folder feeder 1528 Nkodpfsv Ap Iwsx Ah Rjw 1 x three knife trimmer 1565 1 x stream delivery 1564

Condition: like new (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 68086, Machine can make rolls with paper core. And Coreless rolls (Without cardboard tubes) Semi-Automatic Coreless Prestretch Rewinding Machine Specification • Maximum parent roll diameter 500mm • Maximum web width 600mm. Master roll core 76mm diameter. 4 roller stretcher train geared to give a stretch of 335% • Servo driven rewind to vary collection tension from 240% to 335%. Adjustable external electronic rewind Variable speed drive up to 450 meters per minute. • Single position coreless rewind station for either 50, 60 or 76mm ID rolls. (with change parts) • Programmable electronic roll length counter. Maximum rewind roll diameter 250mm. Nsdpfx Ahjxpq T Rj Rjkw Slitting blades for multiple finished roll winding (with change parts) Rolls can be produced with or without oscillation and edge guiding Film break sensor. 3 - phase 400 volt supply. / Air requirements - 4 cfm max. at 80 psi. Guarding to suit current C.E. requirements

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25MythoSarya05, Mytho S Nkodpfxjykuh Ns Ah Rew with TP / Transparent, accessible at ground level with lift trucks and El. lifts. MAST VERSION Winding height 2450 mm 99 program TOUCH display 7" FILM SLIDE TYPE "PRS" (POWER ROLLER STRETCH) 200% pre-stretching Optionally, more or less pre-stretching possible TURNTABLE / TP Ø1650 mm / Opening 06.00 - Mast 12.00 (can be changed at any time) ARYA system for automatic foil blowing and cutting, incl. infrared remote control

Year of construction: 2026, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S23NEOS04, Exhibition facility Stretch winder ATLANTA NEOS ARYA system for automatic foil blowing and cutting. 99 programs can be saved individually With 1 remote control - optionally more possible Winding height 2150mm Mast height 2050 mm (fits through almost every door) Foil power stretch 120-400% Motorized pre-stretching system with stepless adjustment Adjustable pre-stretching ratio from 120 to 400% via control panel Foil application tension electronically controlled via control unit Fast loading system IEF for easy changing of foil rolls Foil specification Max. outer diameter Ø300mm - height = 500mm - core Ø76mm Automatic foil cutting unit Tension of the film can be saved in 4 steps TECHNICAL DETAILS: two maintenance-free AGM batteries 12 V - 100 Ah connected in series At least 160 pallets per load - loading time: 8 -10 hours High frequency battery charger with LED indicator Wrapping height “machine with MAST (pallet included) 2,150 mm Height query via light button or by entering dimensions on the display Protective bar for emergency stop of the travel drive Emergency stop switch according to CE regulations Acoustic warning signal and warning light when the machine starts Fall protection for the film slide Push button for start & stop Function of the machine according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL: All function parameters can be set via the display - Screen lock program change - Adjustable machine speed around the pallet up to 80 m/min Lifting carriage speed can be adjusted up and down independently of each other - Lifting carriage speed from 1.3 up to 5.4 m/min - Lifting carriage speed down from 1.3 to 5.4 m/min - Number of wraps on the pallet foot (1 - 10 wraps) - Number of wraps on the pallet head (1 - 10 wraps) - Adjustment of pallet wrapping height - Foil application tension foot & head winding / ascent & descent independently adjustable - Foil pre-stretching foot & head wrapping / ascent & descent independently adjustable - Ergonomic height for foil change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL: 99 storable winding programs for SFERA EASY - Cross winding (up/down) - Simple winding (only up or only down) - Wrap cycle with preset start and stop height - Winding to a stored height (switching off the light button for the height) - Wrapping cycle for large pallets - Winding cycle for cover sheet film - Soft start cycle for application of edge protection Nsdpfx Aeykug Seh Rjkw - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Other systems available immediately from the Ludwigsburg warehouse

Condition: new, Year of construction: 2026, Size: Prestige SE Nominal heat output: 25kW -- BImSchV stage 2 and CE conform-- combustion chamber completely fireclayed For rooms from: 350 - 600 m³ (according to DIN) Fuel: logs, chips, chip briquettes Nkjdpodlhcyjfx Ah Rsw fuel consumption: 8 - 10 kg/h Blower air capacity, free blowing: 1.450 m³/hour Blow-out opening: Ø 300 mm Flue pipe connection Ø 150 mm with flue gas blower Weight: 400 kg SPS control cabinet: 220 Volt

Year of construction: 2022, condition: new, Type: Strimmer Colour: Black Field of application: Forestry Forestry Mulcher // Tree Mulcher The mulcher for large excavators, with GALEN technology The mulcher on the picture is for 20excavators mulches trees up to 30 cm in diameter and comes in working width: 160 cm. It is ideal for handling and removing vegetation in wooded areas, especially for jobs that require a large shredding capacity and speed Nksdpfxopa Rqgj Ah Rsw For detailed information and price, please contact us

Year of construction: 2022, condition: new, Forestry Mulcher // Tree Mulcher The mulcher for large excavators, with GALEN technology The mulcher on the picture is for 20excavators mulches trees up to 30 cm in diameter and comes in working width: 160 cm. It is ideal for handling and removing vegetation in wooded areas, especially for jobs that require a large shredding capacity and speed Nodpeph Rmnofx Ah Rokw For detailed information and price, please contact us

Year of construction: 2022, condition: new, Attachment suited for: Construction machines Cargo space capacity: 2.200 l Forestry Grapple for Loaders Loader Grapple Manufacturing for all models-brands For detailed information and price offer please contact us The model of the grab in the photo: JCB434 Njdpfopa Rtbjx Ah Rokw Capacity: 2.2m^2 #Log Grab #Timber Grab

Condition: used, Please contact Kenny Bongers, Tijmen Pesselse, Arjen van Dijk or Ronald van der Laar for more information Restproducten te koop: Surplus items for sale: DPX-25082 - CAT AVR 365-2076 - € 1.750,- DPX-25081 - CAT 254-2267 - € 50,- DPX-25080 - CAT AVR 582-9033 - € 750,- DPX-30022 - CAT Control unit 604-9581 - € 250,- DPX-34103 - DSE 8620 MKII Controller - € 2.000,- DPX-35030 - Aisikai ASKW1-3200 Breaker 2500A - € 2.750,- DPX-00000 - CAT DE165GC Canopy - € 1.000,- DPX-25006 - DPX Remote control for generator set - €750,- DPX-25092 - FPT Iveco Air filter pn 8037883 - €165,- Nsdpfxjw Sq Uhj Ah Rokw

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). Njdpfx Ahomdq Tpo Rjkw • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 9 m Linear Unit: ProfiStop Alpha Material Length: 8580 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. Njdpfxsmdq Tas Ah Rskw • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 6 m Linear Unit: ProfiStop Alpha Material Length: 4680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. Nodpfx Ahjmdq Thj Rokw • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 7.5 m Linear Unit: ProfiStop Alpha Material Length: 6180 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.

Condition: new, Year of construction: 2026, Fully automatic cutting of small-to-medium size steel with simple-to-use automation. Put down any steel to cut, the machine will automatically detect it and cut it into jobs tasked with high-accuracy servo motor material positioning. Excel job lists WIFI input for streamlined input of large cutting lists. Servo motor saw actuation with industrial ball-screw actuator. Automatic detection of the steel present with the machine then setting its cut start point for minimum stroke and cutting time. No limit sensors or any operator action required. For every piece of steel you place down to cut, no matter what length, a laser sensor measures its length. Our powerful optimisation algorithm on-the-fly calculates the best order of parts to produce minimum waste. The machine automatically cuts the calculated list without stopping. No need for any inputs from you, just keep putting in new steel stock. Simple, high-speed alternative to double-headed saws. Just enter (or import) the lengths and angles you need and press GO. The machine continuously produces your angled parts, accurately and at high speed. • Fully-automatic cutting operation with bar feeding and cutting to length. • Simple user interface for automatic operation, enter job and cut in seconds. • Simplified part, batch, or large excel lists job cutting. • Remote WIFI excel job lists input with extensive data mapping capabilities. • Automatic labels printing for parts using data from the job list (manual label application, optional). • Fully adjustable saw cutting and material feeding rates for maximum process productivity. • Saw auto-detect of bar size size to set minimum stroke and cut time for cutting. Nkodemdq S Depfx Ah Row • Saw blade jam detect and automatic closed-loop react to de-escalate. • High-flow, high-capacity, no leaks coolant and drainage system. • Automated servo positioning of the saw mitre angle up to ±45° (optional)• Automated servo positioning of the saw mitre angle up to ±45° (optional) Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales Model: S400 Length: 3 m Linear Unit: ProfiStop Alpha Material Length: 1680 mm Pushing capacity: 20 - 40 kg Software: Optimiser QUALITY AUSTRALIAN-MADE MACHINES.