Used Follower Rest for sale (5,319)

Condition: used, Year of construction: 2013, operating hours: 51,438 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 630 mm, spindle motor power: 34 W, spindle speed (max.): 4,000 rpm, spindle bore: 102 mm, travel distance X-axis: 650 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 2,050 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 40 m/min, type of input current: AC, feed rate X-axis: 40 m/min, feed rate Y-axis: 40 m/min, feed rate Z-axis: 30 m/min, total height: 2,670 mm, total length: 7,601 mm, total width: 4,215 mm, spindle nose: 220h5, overall weight: 24,000 kg, Equipment: documentation/manual, Control system: Siemens 840D sl with ShopTurn Year of manufacture: 2013 Spindle hours: 16,310 Location: Germany Equipment: -Main spindle ISM 102 -Counter spindle ISM 102 -Milling spindle HSK63A 12,000 rpm -Eccentric turning and milling -Milling of gears using the involute method -Easy Tool Monitor for Siemens control system -Chuck flushing system, external -Chuck flushing system, counter spindle -Differential pressure monitoring for H-spindle -Differential pressure monitoring for C-spindle -Coolant supply through the counter spindle -Partially hollow chuck, Ø 104 mm -Tailstock function for the counter spindle -Rest support for rest 30-245 mm -Rest slide, NC-controlled -BFA 8/20/80 bar, 980 l, cooler -Hinged belt chip conveyor -Automatic sliding hood, electric -Tool measuring device -Chain magazine for 120 tools HSK63A -Signal light, 4-way -Cleaning of the safety glass -Coolant spray gun -Control cabinet lighting -Oil mist separator Including the following overhaul/repair measures: -General overhaul of main spindle S1 HSK 63 12,000 rpm -Replacement of safety glass Todpfx Aiez Tc Tpsrsd -Replacement of hoses (pneumatics, cooling system, CNC)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. Tjdpfxjq H H Ruo Airsd In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: used, Year of construction: 2021, functionality: fully functional, overall weight: 3,700 kg, type of input current: three-phase, Equipment: documentation/manual, For sale: BERNARDO URS 1000 N universal cylindrical grinding machine, year of manufacture 2021. The machine is virtually new and has only been used a few times. It was originally purchased as part of an expansion of our machining capabilities. Following a change in the company's business profile, the machine was not put into regular production. The sale is therefore not related to any technical fault or machine failure. The machine is in excellent condition with minimal signs of use. Tsdpfxozz Nbwo Airod It is designed for precision external cylindrical grinding as well as internal grinding. With a distance between centres of 1000 mm and a grinding diameter of up to 320 mm, it is suitable for toolrooms, machining companies, shaft production and refurbishment, machine-part manufacturing and small-batch production. Direct sale by the machine owner – SAWA Electronic, Poland. Main technical data: year of manufacture: 2021 distance between centres: 1000 mm centre height: 180 mm external grinding diameter: 8–320 mm maximum workpiece weight: 150 kg internal grinding diameter: 30/35–100 mm maximum internal grinding depth: 125 mm workhead spindle speed: 25–220 rpm grinding wheel: 400 × 50 × 203 mm grinding spindle speed: 1670 rpm internal grinding spindle speed: 10,000 rpm grinding head swivel range: ±30° hydraulic table feed digital position readout power supply: 400 V machine weight: approx. 3700 kg overall dimensions: approx. 3700 × 1900 × 1500 mm Equipment includes: internal grinding attachment 3-jaw chuck Ø200 mm steady rests coolant system digital readout grinding wheel dressing device grinding wheel balancing equipment Price: PLN 62.000 net + VAT Price: EUR 14.200 net + VAT Machine location: Regimin, Mazowieckie, Poland. Inspection and machine demonstration possible by prior arrangement.

Condition: ready for operation (used), functionality: fully functional, Weiler Matador lead and draw spindle lathe -Distance between centers: 500 mm -Swing over bed: 140 mm -Automatic longitudinal/cross feeds -Thread cutting / metric, inch, etc. -Spindle bore approx. 36 mm -Spindle head: Size 5 -Speed range: (geared) 15–3,550 rpm -Brake motor -Coolant pump -Chuck guard -Forkardt F 160 collet chuck -Quick-change tool holder Multifix & insert -Drill chuck -Follower rest -Documentation Todoztbbtopfx Airsd Dimensions: L x W x H 1.5 x 0.6 x 1.2 meters / Weight 600 kg Errors and omissions excepted

Condition: ready for operation (used), functionality: fully functional, WEISSER HEILBRONN Junior / L & Z lathe with Heidenhain digital control -Center height 220mm -Turning diameter over bed 440mm -Distance between centers 1000mm -Spindle bore approx. 50mm -Spindle speeds 40 - 2000 rpm -Automatic longitudinal / facing feeds -Threading / Metric / Inch, etc. -Heidenhain digital display ND 780 -Forkardt F250 3-jaw chuck Tsdpfx Aozwggvoirjd -Multifix base and inserts -Electric chuck guard -Follow rest -L & Z spindle cover -Work light -Documentation Dimensions: L x W x H 2.6 x 1.3 x 1.8 meters / Weight approx. 1800 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, In this offer you are purchasing a mint condition resting ECG "GE CAM Connect 14" Object of sale: Tsdswr Anbepfx Aired 1 x GE CAM Connect 14 with the following features: Mobile resting ECG 12 or 15 leads Easy to integrate into MUSE and PACS systems With automatic arrhythmia detection DICOM-compatible Condition: This is a used device which may show signs of use (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! For further information you can of course also contact us personally.

Condition: not inspected (used), The BMP VOGHERA SPC 300 is an ideal choice for production shops, machining centers and manufacturing companies. Here's why: ➤ Robustness and durability The BMP VOGHERA SPC 300 is built with high-quality materials, guaranteeing its robustness and durability. It can withstand the most demanding working conditions, ensuring a long service life. ➤Ease of use Thanks to its self-learning lathe system, the BMP VOGHERA SPC 300 is easy to program and operate. Even novice operators can quickly master its features. Tsdjr Ifcyepfx Airjd ➢ Product highlights: ✓Self-learning lathe: the machine features an intuitive programming system that makes creating complex parts effortless. ✓Precision: the BMP VOGHERA SPC 300 offers exceptional turning precision, guaranteeing high-quality results. ✓Polyvalence: With a tip height of 300 mm and a distance between tips of 1500 mm, it can handle a wide variety of parts. ✓Accessories included: the machine comes with a fixed and tracking steady rest, as well as a MULTIFIX toolholder, offering additional options for turning operations. ➢Specifications: Teach in lathe Center height: 300mm Distance between centers: 1500mm Diameter above bed: 610mm Diameter above tool carriage: 610mm Diameter in the gap: 790mm Spindle bore: 105mm Spindle Nose: CAMLOCK 105mm Spindle speeds: 25-1500mm Z travel: 600mm Quick forward in Z: 5m/min Quick forward in X: 5m/min Tailstock: CM5 Tailstock diameter: 80mm Tailstock travel: 180mm Machine equipped with: - fixed and follow rest - MULTIFIX tool holder The BMP VOGHERA SPC 300 is the ideal solution for demanding professionals looking for a high-performance, reliable turning machine.

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler high-precision lathe, model Condor 81, with lead and pull spindle, featuring a 3-axis digital display, Heidenhain ND780, from a training workshop. Technical data: >> Year of manufacture: 1988, Machine No. 88-955 >> Center height: 165 mm >> Distance between centers: 750 mm >> Spindle speeds: from 22 to 2800 rpm Tjdpfx Ae Afxx Hsirod >> Spindle bore: 40 mm >> Short taper spindle head, DIN 55027, size 5, with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.015 to 0.46 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches: from 0.18 to 28 mm >> Weight: approx. 1100 kg >> Spindle brake can be activated >> Length: 1.83 m, Height: 1.29 m, Depth: 0.88 m Accessories and equipment: >> 3-axis digital display, Heidenhain ND780 >> 1 three-jaw chuck, new, with 2 sets of jaws >> Collet chuck system, collets from 3 to 30 mm, 40 collets, some in duplicate >> Mulifix size B with 3 steel holders >> Bed stop >> Machine feet >> Drill chuck >> Follower rest For safety: >> Guard for the lead and pull spindle >> 2 emergency stop buttons >> Spindle brake About the machine: For sale is a used Weiler Condor 81 lathe, manufactured in 1988, in very good condition. The machine is fully functional. The lead and pull spindle are equipped with a guard for safety. This Weiler lathe comes from a training workshop. It is a very robust and powerful machine. The 3-axis digital display from Heidenhain makes operation even easier and more precise. The machine has been electrically and mechanically inspected by us. A complete oil change has been carried out. This newer generation of Weiler lathes is very user-friendly. Take the opportunity to inspect and test this machine on-site while it is powered up.

Condition: good (used), Year of construction: 1978, turning diameter over cross slide: 430 mm, spindle bore: 82 mm, turning diameter: 640 mm, center height: 320 mm, center width: 3,000 mm, quill stroke: 250 mm, total length: 5,600 mm, total width: 1,300 mm, total height: 1,900 mm, swing diameter over cross slide: 430 mm, bed width: 430 mm, Turning diameter in gap: 850 mm, rotational speed (max.): 1,800 rpm, rotational speed (min.): 9 rpm, Conventional lathe, center high 320 mm, between centers 3000 mm, bore Ø 82 mm, 27 speeds 9 - 1800 rpm, motor 18,5 kw, nose DIN', dimensions 560x130x190 cm, weight ca. 5000 kgs; equipement: DRO on 2 axis, coolant device, 3-jaws chuck FORKART Ø 400 mm, tool post RAPID with toolholders, steady and following rest with roller pin Tsdpfxozin Nie Airjd

Condition: used, functionality: fully functional, spindle bore: 60 mm, total length: 2,600 mm, type of input current: three-phase, spindle mount: MK 5, Equipment: rotational speed infinitely variable, Well-maintained and stable Cazeneuve HBX590 center lathe 1000 mm between centers Turning diameter above the bed: 580 mm Spindle bore: 60 mm Tool holder: MK5 Motor: 11 kW Speed control via Facom frequency inverter with speed control on the dashboard. Includes the following accessories: Fixed steady rest Protective guards (prevents coolant from dripping onto the floor) Machine lamp Tsdpjz Ar A Tjfx Airjd Coolant system Axial stop for the main spindle Acurite digital readout Hydraulic system cleaned and fluid replaced in 2025. Comes with the original tool holder. A multifix C can be included for an additional charge. Make a good offer and this versatile lathe can be yours! If you have any questions or would like more information, please send us a message or call us.

Condition: used, Year of construction: 1992, operating hours: 53,500 h, functionality: fully functional, CNC turning machine Manufacturer: GILDEMEISTER Model: CTX-400 Year of manufacture: 1992 Control system: EPL-2 Operating hours: approx. 53,500 h Serial number: 310549 Technical data: - Turret: 12 stations VDI-30 Tjdpfxezcd Hlj Airjd of which 6 stations are driven - Spindle speed: 25 - 5,000 rpm Drive power: 27.5 kW at 60% duty cycle - Spindle bore: Ø 72 mm - X-axis travel: 212 mm - Z-axis travel: 640 mm - Max. turning diameter: 500 mm - Turning diameter over guide: 290 mm - Hydraulic steady rest (following rest) Quill stroke 100 mm / MK4 mounting - Hydraulic steady rest SMW Autoblok - Hydraulic 3-jaw chuck 200 mm - Collet chuck Hainbuch - Chip conveyor - Parts catcher (disassembled / incomplete) - Complete programming manual - Mechanical and electrical documentation - Large accessory package of jaws / holders - Spare parts package (drive belts / small parts) - 2x foot switches - Machine weight: 5.2 t - Loading onto truck included

Condition: excellent (used), Year of construction: 2022, operating hours: 5,000 h, functionality: fully functional, center height in crank: 200 mm, center height: 200 mm, workpiece weight (max.): 100 kg, grinding length: 1,000 mm, workpiece weight between centers: 100 g, workpiece diameter between centers: 400 mm, On behalf of a customer, I am offering this machine, which is in nearly mint condition. It is currently still powered up. The machine is equipped with the following options: Glass linear scales in X and Z axes Electric door drive Integrated wheel change assistant Fanuc 0i TF Blue Solution HMI Back Solution Basic Black CAM Profile Security interface Remote diagnostics via mobile network (4G) Grinding head with automatic 1-degree indexing Grinding head UR 1-2-3 (prepared for HF internal grinding spindle) T1 500; T2 400 mm 3-jaw steady rest Active longitudinal positioning at the head Semi-automatic balancing GAP control A brochure for the K 10 can be provided upon request. Tjdpow Ed D Rsfx Airod

Condition: refurbished (used), Year of construction: 2003, functionality: fully functional, !!! Attention!!! We buy your functional or defective Hobart pulping turbine, including accessories, and offer a repair service upon request. This is a pulping turbine from the premium manufacturer Hobart, model PVM 302. It is a mobile, versatile turbo mixer for pureeing, mixing, chopping, emulsifying, stirring, etc. Ideally suited for processing: vegetable, meat, and fish soups, sauces, vegetables (grated), mashed potatoes, yogurt, dressings, fruit and vegetable purees, liquid dough, baked goods, sorbets, and omelets. Compact dimensions and easy handling guarantee quick, cost-effective use even in confined spaces. The machine is equipped, as can be seen in the photo of the pulping head, with the PVM 302 sieve insert, 4 mm hole. The PVM 302 has an integrated safety feature that prevents automatic restart after a power failure or mains disconnection. An electrical safety device ensures that the mixing head can only be operated when it is set to a height of more than 300 mm or less than 900 mm. The PVM 302 has been completely overhauled in our in-house workshop, and the following parts have been replaced: flexible shaft / bearing shaft / mechanical seals / various ball bearings / 1 set of horizontal blades. The pulping turbine is now in top technical condition. The unit can be inspected and demonstrated in our workshop. Upon request, we can also send a video of the unit. The machine is available immediately. The fine sieve insert is included, as is a grease gun for regular maintenance. See photos! Manufacturer's list price = €32,945 NET You will receive an invoice with VAT shown. Our used equipment service for you: 6 months warranty on electrical parts, limited to the replacement of defective parts, excluding installation and removal costs High-quality brand-name equipment at fair prices Professional overhaul / inspection & expert cleaning tested & fully functional Shipping or self-collection can be flexibly chosen Competent advice - before and after the purchase Provision of operating instructions, wiring diagrams & spare parts Inspection according to DGUV V3 Technical data: Dimensions: in operation L x W x H = 1350x550x1500 mm Tedpfjzzw Iljx Airod in rest L x W x H = 1100x550x1700 mm Turbine speed / 1st gear 725 rpm / 2nd gear 1450 rpm Serial number: 94-842572 Year of manufacture: 2003 Condition: Used, overhauled, fully functional Machine design: Frame and all parts in contact with food made of chrome-nickel steel 18/9. The machine is mobile and equipped with 4 large rollers, two of which can be swiveled and locked. The machine is tilt-proof due to the rear outriggers. Machine with high-performance turbine and vertical and horizontal blade set; good chopping and pureeing performance. Turbine with suction guard. Power transmission via flexible shaft. The machine has the GS/CE mark. Motor: Special motor, ball-bearing, with motor protection switch and robust on/off switch, suitable for continuous operation. Turbine with two speeds. I. gear 725 rpm (low speed) II. gear 1450 rpm (high speed) Motor with fan cooling, protection class IP 54 Total connection value: 1.85 kW three-phase 400V/50/3 Fuse: 3 x 10 amps.

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, spindle speed (max.): 4,000 rpm, travel distance X-axis: 220 mm, travel distance Z-axis: 1,065 mm, Control system: Siemens 828 D Drive spindle Speed: 4,000 rpm Power: 9 kW Maximum torque: 110 Nm Chuck diameter: 210 mm Spindle bore: 53 mm Spindle nose: A2-5'' Working area Distance between centers: 1,000 mm Center height: 240 mm Tjdpfszrghvjx Airsd Swing over bed: 470 mm Swing over compound slide: 200 mm Swing over cross slide: 430 mm Z-axis travel: 1,065 mm X-axis travel: 220 mm Tool system Turret: PARAT 4-position turret head RD 2 Tailstock Technology: Follow-type Centering point: MK-4 (rotating) Steady rest Technology: Traveling Diameter range: 12 mm - 50 mm Equipment Chip management: Chip tray Coolant supply: Coolant pump, 7 bar Additional feature: Adapter plate PARAT RD-2 with internal cooling Chuck: SMW wedge-type chuck (D = 210 mm) Jaw set: 1 set of hardened jaws Footprint (L x W): 2.91 m x 1.24 m

Condition: used, Year of construction: 2001, functionality: fully functional, spindle bore: 52 mm, spindle speed (max.): 6,000 rpm, feed length X-axis: 240 mm, feed length Z-axis: 580 mm, overall weight: 4,100 kg, CNC Turning Machine, 1-Turret Manufacturer: Daewoo / Doosan Model: Puma 230A Year of Manufacture: 2001 Serial Number: XXXX Control System: Fanuc 18-T Operating Hours: Unknown Technical Specifications: ----- - Turret: 12 stations, BMT - Spindle Speed: 6,000 rpm max. - Bar Capacity: Ø 45 mm - X-axis Travel: 240 mm - Z-axis Travel: 580 mm - Hydraulic steady rest (following type) - Chip conveyor - Tool measurement system - Machine Weight: 4.2 t - Loading onto a truck is included in the price Accessories: ----- - Documentation - 2x Foot switches - 1x 3-jaw chuck Tjdpozzd I Sefx Airod - 1x Collet chuck, Hainbuch - Tool holder set

Year of construction: 1980, condition: good (used), A used, very well-maintained cycle-controlled lathe from Weisser Heilbronn with a SIEMENS control system. Distance between centers 2000 mm Center height 295 mm Swinging diameter over bed 600 mm Swinging diameter over cross slide 260 mm Swinging diameter in the crotch 800 mm Total length of the crotch 375 mm Bed width 450 mm Travel of X-axis 350 mm Travel of Z-axis 1850 mm Spindle nose DIN 55022, size 8 Spindle speed, number 18, 14 – 1400 rpm Spindle bore 71.5 mm Diameter of front bearing 110 mm Feed range 0.01 – 40.95 mm/rev Rapid traverse 8 m/min DC drive 15 kW 400V 50Hz Max. permissible torque on the spindle 2500 Nm Tailstock quill 80 mm Quill stroke 250 mm Internal taper in quill MK 5 Length x width x height Machine weight 5500 kg Accessories: Tailstock Pneumatic three-jaw chuck with replaceable jaws, 315 mm Quick-change tool holder "MULTIFIX" in front of the center, size "C" Todpfxogyy I Ao Aired Four-position turret behind the center Tool holder Coolant system Follow rest, pneumatically actuated Technical data and dimensions: Subject to change without notice. Video conference via WhatsApp possible after scheduling an appointment.

Condition: like new (used), Various steady rests for lathes, brand: CAZENEUVE, types: HB 800, HB725, MAXICA, HBX 360. Follow rest for Cazeneuve HB725. Various other brands also available. More information upon request. Price on request, shipping possible. Sales price excluding VAT, invoiced. Tsdpfey Ep I Eox Aired

Condition: excellent (used), Year of construction: 1988, functionality: fully functional, Weiler Matador VS-2 lathe with lead screw and tailstock, featuring a 3-axis digital display from Elesta, from a training workshop!! Technical data: >> Machine no. 88-8115, year of manufacture 1988 Todpfjy Tmkvex Airjd >> Center height 140 mm >> Center distance 500 mm >> Speed: 15 – 3550 RPM >> Spindle bore 36 mm >> Short taper spindle head DIN 55022-5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.012 to 0.9 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 12 mm >> Brake motor >> Weight approx. 700 kg >> Length 1.4 m, height 1.2 m, depth 0.55 m Accessories and equipment: >> 3-axis digital display Elesta >> Quick-change tool post, internal and external collets (see picture) >> 1 three-jaw chuck, 1 set of jaws >> Mulifix size A with 3 steel holders >> Spindle guard >> 1 bed stop >> Change gears >> Follow rest >> Machine feet About the machine: A Weiler Matador VS-2 in very good condition is offered for sale. The machine is fully functional. The slides all move smoothly and evenly. Even at high speeds, the Weiler runs smoothly. The original location of the Weiler was a training workshop. The machine is equipped with a wide range of accessories. Take the opportunity to inspect this machine on-site while it is powered up and to convince yourself of its very good condition.

Condition: new, Year of construction: 2025, functionality: fully functional, Heigth of center: 500 mm Distance between center: 3000 mm Bed width: 755 mm Max. swing over bed: 1000 mm Max. swing over slider: 610 mm Diameter of spindlehole: 130 mm Spindlenose: D1-15/short cone 15 Speed range: 3.15 - 315 RPM (21 steps) Range longitudinal feeds: 0.1 - 12 mm/U 57 steps Range cross feeds: 0.05 - 6 mm/U 57 steps Quick feed in Z- and X-Axis: 3700/1850 mm/min Metric thread: 1 - 120 mm Inch thread: 3/8 - 28 Pitch/Inch Model thread: 0.5 - 60 mm Diametral pitch: 1 - 56 DP Diameter of Tailstock Quill: 160mm Quill konus: MK 6 Quill stroke: 300 mm Power of engine: 22 KW Weight: 14400 kg Dimensions LxWxH = 6350 x 2190 x 1810 mm Accerssories - D800 mm independent face plate - 3 axis DRO system - Coolant tank Tjdpfx Aiezr E E Tjrod - Steady rest in range of D20 - 480 mm - Following rest in range of D20 - 200 mm - 4-fold tool holder - Chuck cover - Rapid speed on longitudinal and cross slides - Motorized tailstock

Condition: reconditioned (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 662547, warranty duration: 6 months, total width: 2,707 mm, total length: 745 mm, total height: 1,801 mm, overall weight: 280 kg, conveyor belt width: 290 mm, year of last overhaul: 2026, Used machine – year of manufacture 2013 Overhauled by a specialist, with a 6-month warranty. The Quadro Filius is a program-controlled machine for the gentle processing of all types of roll dough. The following types of rolls can be produced: - Rustic rolls, square - Rustic rolls, square, dimpled - Rustic rolls, diamond-shaped - Rustic rolls, triangular - Seeded breadsticks The machine is characterized by its high flexibility in the production of these baked goods in small and medium-sized businesses. It can be combined with downstream dusting units or a rotary table system. Operation is via a text display. The machine has been inspected and tested with dough by our master baker. Equipment: + Head machine, year of manufacture 2013 + Moistening station, year of manufacture 2013, moistens dough pieces from above and below + Seeding station with rotary table, year of manufacture 2013 + Integrated SIEMENS control system: operation via a text display + Machine is supplied with operating instructions Technical data: Hourly output: 1,400 - 4,000 pieces (product-dependent) TA (Take-Away Time): up to 170 (product-dependent) Weight range: 25 - 360 grams (product-dependent) Dimensions in working position: 2707 x 745 x 1801 mm (W x D x H) Dimensions in resting position: 1870 x 745 x 2435 mm (W x D x H) Machine body: Stainless steel, brushed Cladding panels: Stainless steel, brushed Connection: 230/400 V, 1 kW, 50 Hz, 16A CEE plug Compressed air: 6 - 8 bar Net weight: 280 kg Cable length: 3 m Tjdpfx Aisw A Nxzerjd

Condition: good (used), Year of construction: 2014, functionality: fully functional, volume flow: 1,000 m³/h, total width: 1,020 mm, total length: 1,680 mm, total height: 2,460 mm, overall weight: 1,540 kg, operating pressure: 10 bar, input voltage: 400 V, power: 14.2 kW (19.31 HP), 1 heat-regenerating compressed air adsorption dryer. The dryer was in use from 2014 to 2017. The system has been out of operation since 2017. The compressed air came from an oil-free Atlas Copco ZR3 compressor with 132 kW. Manufacturer: Donaldson Filtration Deutschland GmbH Type: HRS 1000 Year of construction: 2014 Volume flow at 7 bar: 1000 m³/h (16.66 m³/min) Tjdpfx Aor A El Eeired Connection: DN 80 Installed power: 14.2 kW Dimensions length / width / height: 1680mm / 1020mm / 2460mm Weight: 1540 kg Desiccant bottom (20 cm): 3 mm activated aluminum oxide Desiccant middle (40 cm): 2 mm activated aluminum oxide Top desiccant (rest up to the top) silica gel as a ball. The desiccant is already disassembled and immediately available. The desiccant was sucked out of the container with a vacuum cleaner and packed separately in airtight bags. The desiccant is still in a usable condition. It is not oily or soiled. There is the possibility of external re-drying. The TÜV has inspected the inside of the containers and an expert opinion is currently being prepared. "Loose adhesion on the lower part of the dished end" (pictures to follow)

Condition: new, Year of construction: 2026, The CORMAK GOLIAT 800 × 4000 (CJ6280YC/4000) Main Advantages Versatile machining capabilities – the GOLIAT 800 × 4000 enables external and internal turning, taper turning, polishing, metric, imperial, module and DP threading, drilling, and broaching operations. Heavy-duty cast iron bed construction – provides maximum vibration damping. The bed is hardened and precisely ground, ensuring excellent torsional rigidity, long service life, and machining accuracy. Central feed control system – equipped with a lead screw and feed shaft for threading and automatic longitudinal and cross feeds. 3-axis digital readout system – displays precise position values for longitudinal movement, cross slide movement, and compound slide movement using optical scales and electronic signal processing. High-quality spindle bearing system – reinforced spindle support with precision bearings ensures smooth operation and high machining stability. High machining capacity – large spindle bore of 105 mm, center distance of 4000 mm, 315 mm 3-jaw chuck, 400 mm bed width, and a powerful 7.5 kW motor provide excellent performance for large workpieces. Rapid longitudinal and cross feed system – significantly reduces machining time and improves productivity. Hardened and ground spindle gears – ensure quiet operation, durability, and reliable power transmission. Todpozp H Azefx Airsd Automatic feed and threading capability – the lead screw and feed shaft allow precise thread cutting and automatic feeds. Ergonomic control panel – allows easy adjustment of spindle speeds and automatic feed parameters. Threading dial indicator – enables accurate thread engagement and repeatable threading operations. Removable bed gap section – allows machining of oversized components such as discs. With the gap removed, the machine can handle workpieces with a maximum diameter of 1000 mm. Technical Specifications Maximum turning diameter over bed Ø800 mm Maximum turning diameter over cross slide Ø560 mm Maximum turning diameter in bed gap Ø1000 mm Bed gap length 225 mm Distance between centers 4000 mm Bed width 400 mm Maximum tool size 25 × 25 mm Maximum compound slide travel 140 mm Maximum cross slide travel 350 mm Spindle bore Ø105 mm Spindle nose D1-8 CAMLOCK Spindle speeds 12 speeds (36–1600 RPM) Longitudinal feed range 65 steps (0.063–2.52 mm/rev) Cross feed range 65 steps (0.027–1.07 mm/rev) Metric threads 22 ranges (1–14 mm) Imperial threads 25 ranges (28–2 TPI) Module threads 18 ranges (0.5–7 mm) DP threads 24 ranges (56–4 DP) Rapid longitudinal feed 4.5 m/min Rapid cross feed 1.9 m/min Tailstock quill diameter 75 mm Tailstock taper MT5 Maximum tailstock quill travel 150 mm Tailstock lateral adjustment ±15 mm Main motor power S1/S6 7.5 / 9 kW, 400 V Rapid feed motor power 250 W Coolant pump power 60 W Machine dimensions (L × W × H) 5700 × 1150 × 1800 mm Machine weight approx. 5300 kg (±2%) Standard Equipment 3-axis digital readout system Self-centering 3-jaw chuck, 315 mm Independent 4-jaw chuck, 400 mm Faceplate, 400 mm Rapid feed system Fixed steady rest Follow rest Two fixed centers MT5 Spindle reducing sleeve Coolant system Work lighting Chuck and tool post keys Complete set of service tools Operating manual CE Declaration of Conformity

Condition: excellent (used), Year of construction: 1995, Maximum center height: 330 mm Maximum distance between centers: 2000 mm Working area: Max. turning diameter over bed cover: 650 mm Max. turning diameter over cross slide: 360 mm Main spindle: Spindle diameter at front bearing: 140 mm Spindle bore: 107 mm Tsdpfjx Sx Htjx Airsd Main drive: 58.5 kW 2-stage speed range: 4 – 750 rpm / 750 – 3060 rpm Feed drive: Rapid traverse rate X/Z axis: 10/10 m/min Turret: Number of tool positions: 12 Of which, driven tool positions: 6 Cylindrical shank tool holder: VDI 50 mm Dimensions / Weight: Footprint L x W x H: approx. 6400 x 2150 x 2000 mm Weight: 9400 kg Accessories / Special features: • CNC control system HEIDENHAIN TurnPlus EP 90 with color screen • Spindle orientation C-axis • 12-position turret, VDI 50, of which 6 positions with driven tools, manufacturer SAUTER DIN 5482 B 20x17, max. speed 3000 rpm. • Hydraulic 3-jaw chuck Ø 315 mm with various clamping jaws • Hydraulic steady rest with follower device • Hydraulic quill actuation • Air extraction system, manufacturer LTA • Various tool holders VDI 50 • CE compliant In 08/2025, GILDEMEISTER Service replaced the following parts: 1 servo motor, 1 AC servocontroller inverter power module for 2 axes, 1 power module Simodrive, 1 rectifier/inverter module, 1 control unit for 1 axis, 1 control module for 2 axes inverter servo drive, 1 Simodrive power module (1-axis motor) Total repair costs: 17,000.00 EUR net Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Year of construction: 2014, operating hours: 11,921 h, condition: good (used), Multivac T300 Tray Sealer Multivac T300 tray sealer with only 11,921 production hours. This Multivac T300 is an entry-level automatic tray sealer with many advantages. Thanks to its compact design, this machine is perfect for many production facilities with limited space. It operates fully automatically; press start, and the machine does the rest. The machine can be easily set up using the large touch screen display. The built-in Busch vacuum pump (150 m³/h) provides fast production cycles, 24/7. It includes a tray dispenser for tray size 187 x 137 mm. The machine can operate with gas. The machine will be shipped with 1 tool. The following tool sizes are available: Tray size 227 x 178 mm (2 tools in stock) Tray size 278 x 187 mm Tray size 187 x 137 mm (2 tools in stock) Tray size 164 x 123 mm (1/8 gastro) MANUFACTURER: Multivac MODEL: T 300 TYPE: Automatic compact tray sealer POWER SUPPLY: 400/230V POWER: 5.5 kW EFFICIENCY: 10 cycles per minute HEIGHT: 180 cm WIDTH: 110 cm Tedpjz I N Nlsfx Airsd LENGTH: 410 cm WEIGHT: 1,100 kg YEAR: 2014

Condition: used, Year of construction: 2003, functionality: unexamined, center height: 300 mm, center width: 1,500 mm, turning length: 1,500 mm, The Löw W570 is a used, conventional lead and follower rest lathe, manufactured in 2003. With a center height of 300 mm and a turning length of 1,500 mm, it is a robust workshop machine for individual parts and repairs. It is equipped with a Givi Misure ME 620 digital display, and the operating manual is available. The machine is located in the Düsseldorf area. Tedpfx Aioz H Uhqjrod TECHNICAL DATA - Year of manufacture: 2003 - Center height: 300 mm - Turning length: 1,500 mm - Digital display: Givi Misure ME 620 EQUIPMENT AND ACCESSORIES - Three-jaw chuck (as shown in the photos) - Tool holder on the top slide (as shown in the photos) - Tailstock - Tool set - Operating manual for Löw W 490/570 series CONDITION During our inspection on October 1, 2026, the machine was not in operation. We are therefore selling it as untested, in its current condition. We recommend an on-site inspection. AREAS OF APPLICATION For maintenance, training, prototype construction, and job shop turning, i.e., anywhere where individual parts are turned manually. LOCATION AND HANDLING The machine is located in the Düsseldorf area. Inspection by appointment. Dismantling, loading, and transport are organized by the buyer; upon request, we can provide contact information for freight forwarders in the region. Price on request. Please contact us via the contact form.