Used Foseco Impeller for sale (214)

Condition: good (used), radial fan, dust extraction blower, fan, extraction, dust blower -Engine power: 3.6 kW -Speed: 1440 rpm -Volume flow rate: m³/h -Inlet connection: Ø 450 mm -Outlet connection: Ø 450 mm Fodpeb Ilxdefx Afpjfu -Impeller: Ø 670 mm -Quantity: 1 available -Dimensions: 1200/1100/H1350 mm -Weight: 242 kg

Condition: used, Centrifugal fan, dust extraction fan, fan, extraction, dust blower, welding fume extraction -Motor power: 0.37 kW -Speed: 2800 rpm -Connection input: Ø 115 mm Ffedpfx Aocucu Iefpsu -Outlet connection: Ø 115 mm -Impeller: Ø 300 mm - Connection: 400 volts -Dimensions: 400/600/H450 mm -Weight: 21kg

Condition: used, Year of construction: 2000, used, top condition, low hours Make: Schuko Model: TSK 250 CE Year of manufacture: 2000 Machine no.: Motor: 7.5 kW Connection diameter: 250 mm Pressure approx. 2725 m³/h Air flow rate: 4595 m³/h Steel impeller Belt drive Vibration dampers Space requirement approx. 1300 x 700 x 1300 mm Weight approx. 200 kg Fjdpfxeycxh Re Afpjfu Location: 97447 Gerolzhofen, free loaded, unpacked Handed over in as-inspected condition, without warranty or guarantee.

Condition: used, used, in good condition, low hours Make: Schuko Model: L 400 Machine No. 0390 For shavings / wood chips Slow-running approx. 1400 rpm Motor: 11 kW Connection diameter: 400 mm Pressure approx. 1836 m³/h Ffedpsycxh Djfx Afpju Air output: 11,760 m³/h Steel impeller Space requirement approx. 1100 x 800 x 1500 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: used, used, in good condition, low hours Manufacturer: Schuko Type: L 350 Machine no.: 0-90390 Slow runner, approx. 1400 rpm Motor: 11 kW Connection diameter: 350 mm Pressure approx. 2229 m³/h Airflow: 9640 m³/h Steel impeller Required space approx. 1100 x 800 x 1500 mm Weight approx. 200 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, without warranty or guarantee. Ffedpfeycxgyox Afpju

Condition: new, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Ffsdewbql Hspfx Afpeu Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Condition: new, Year of construction: 2026, FABO Bucket wheel washers are intended to maximize the support of various terms throughout the process, such as the maximum recovery of fines or maximum remove of fines with lower power capacity. Ffjdpfx Ajwck N Iofpju Sand and water compound is supplied into the washing tank of bucket wheels and the sand is obtained and dewatered by impellers after washing. The dirty water enters the spiral tank for fine sand pressing, then the pressed fine sand is shifted into the bucket wheel tank by the gradually rotating spiral blade, the fine sand is carried out by the buckets, dewatered and discharged.

Year of construction: 2026, condition: new, Specifications: - Performance: 200-600 bottles/h - Nominal performance: 300 L/h Ffedpfefkz Tqex Afpou - Electric demands: 0,1 kW, 24 V - Material: WNr. 1.4301, AISI 304 stainless steel, food industrial PP - Dimensions: 350x1100x1250 mm - Weight: 40 kg - Connections: DN 65 - IP65 certified electronics - Filling type: Volumetric - Filling accuracy: +-0,5% - Filling temperature: 0-100°C - Filling range: 5g-35.000g Automatic heat control, very easy to clean. It requires minimal maintenance. The impeller functions as a self-priming pump, and as a flowmeter. Ideal for high viscosity materials like honey, jam, pulp, etc… The filling method is semi-automatic, thanks to the end switch. Between two jars the nozzle closed without trickles. AUTOMATIC turntable with capacitive sensors. Allows operating without human intervention.

Year of construction: 2026, condition: new, Specifications: - Performance: 2000 L/h - Electric demands: 0,5 kW, 230 V, 6 A, monophase Fedsfhb I Hopfx Afpofu - Material: WNr. 1.4301, AISI 304 stainless steel - Dimensions: 550x1075x350 mm - Weight: 50 kg - IP65 certified electronics - Food industrial impeller pump - Juice level sensors - Fully automatic operation, very easy to clean. - With 4pcs wheels. Requires minimal maintenance. - The machine is suitable for any Maurer press.

Condition: used, functionality: fully functional, machine/vehicle number: 30044, mileage: 38,900 km, power: 170 kW (231.14 HP), first registration: 11/2020, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 4x2, fuel: diesel, wheelbase: 3,560 mm, driver cabin: day cab, gearing type: mechanical, emission class: euro6, suspension: steel-air, loading space volume: 7 m³, Equipment: ABS, air conditioning, airbag, central locking, cruise control, differential lock, electronic stability program (ESP), immobilizer system, traction control, truck registration, The mileage of the vehicles offered may vary, as some are currently in rental service! Further comparable vehicles available upon request. Right-hand drive, 4-cylinder OM 934 engine, ABS, ASR, ESP, disc brakes, engine brake, reinforced frame, front axle 5.3 t, rear axle 11 t, air suspension with differential lock, lane departure warning, Active Brake Assist, hill-start assist, underride protection, reverse alarm, daytime running lights, rain sensor, light sensor, plastic tool box. Cab with 2 seats, driver's comfort seat, fixed passenger seat, roof hatch, air conditioning, pollen filter, electric windows, electrically adjustable and heated mirrors, radio/CD with Bluetooth, speed limiter, central locking with remote control, immobilizer with transponder, OBU preparation, cruise control, digital tachograph, sun visor, reversing camera. Hydrostatic drive, sweeping speed 0-14 km/h, infinitely variable turbine, container fully made of stainless steel, additional manual pump for raising the tank, weight display, operating hour counter, sweeping hour counter, and water indicator (remaining volume 300 l). Automatic water supply shut-off when raising the sweeping units and when engaging reverse gear, acoustic signal in the cab when tank is raised, 2 LED beacons + 2 LED work lights, soundproofing in engine compartment, right/left sweep unit, collectable on both sides, dual sweeping system (simultaneous sweeping on both sides), sweeping width: 2300 mm / with dual sweeping system: 3940 mm, trailing disc brooms with steel bristles Ø 700 mm, disc broom tilt adjustable (joystick right and left), roller broom with mixed polypropylene and steel wire bristles L=1500 mm Ø 400 mm, spray nozzles on disc brooms, continuous front spray bar with 6 nozzles, 3 nozzles per disc broom, 6 nozzles in the suction mouth, 5 nozzles on the roller broom, water system for cleaning upper suction shaft with external water connection, stainless steel leaf screen, area approx. 2 m², pneumatically operated lifting and lowering with vibration system, impeller made of Hardox 700, 8 mm thick, volute casing made of Hardox 500, 5 mm thick, water nozzles for internal turbine cleaning, 2000-liter stainless steel AISI 316 water tank integrated into the body, filling via hose with backflow prevention, Wilden P1 membrane pump (dry-run protected), rear-mounted leaf vacuum system, reversing camera with monitor in the cab, PM10, holders for broom and shovel, cable remote control. Fjdpfx Afoyaqndepefu

Condition: refurbished (used), Year of construction: 2016, HANDTMANN VF-608 plus F,P.A. 2016 year The machine has been completely renovated using only original parts. 3 months warranty for parts. All seals, bearings and siemering are new. Fodpfx Afopy Edlspofu Servomotors, gears and vacuum pump after complete regeneration. New control panel. Machine with a clip-socket. Accessories: grease, grease gun, impeller wrench, funnel wrench, scraper, set of funnels and technical documentation. The machine is included with the AG-410 linking gearbox. Delivery time: ready to delivery.

Condition: used, Documentation Multievacuator Additional information Pneumatic conveyor belt. Suction operation for powders or granules. The Multi-evacuator unit is a combination of blower and cyclone, designed for the suction of granular materials. The upper part, containing the impeller, can be opened for easy cleaning and replacement of the cyclone filter basket. The fan creates the necessary vacuum to draw the material from point A and discharge it through the cyclone via a rotary valve to point B, either directly or via a discharge line Capacity +/- 5 T/h depending on layout (see document). Ffsdpfx Afex R Al Dspsu Motor: 3 kW Plan to provide a rotary valve. Available at extra cost.

Condition: used, Manufacturer : Vatron MAU Fodpfx Asx Rz Nhefpjfu Agitation: Rayneri Typhoon impeller diameter Ø400 / 3 kw / 323 rpm - Polished stainless steel, thickness 6 mm - Diameter. 2000 mm - Double insulation jacket 30 mm / stainless steel sheet 3 mm - Washing turbine - AC & vacuum connections

Condition: new, Year of construction: 2025, Technical data: Suction capacity 510 l/min. Filling capacity 400 l/min. Maximum pressure 10 bar Tank capacity 90 l Cylinder/stages 2/1 Speed 1.300 min/1 Motor power 3 kW/ 400 V Description: The universal with V-belt drive and qualitative equipment especially suitable for craftsmen for use where compressed air quality, durability and efficiency are essential long life thanks to high performance low speed units safe transport and excellent stability thanks to large wheels with parking brake Optimum cooling thanks to large fan impeller aftercooler with cooling fins ensures a low boiler inlet temperature and thus less moisture in the compressed air Fodshk Dfkepfx Afpefu better efficiency due to optimised aggregates Standard with: Condor pressure switch Pressure gauge Pressure reducer with water separator and Rectus quick coupling Motor with overload protection Location: Ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 203 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 200 mm Length approx. 1061 mm Width/depth approx. 577 mm Height approx. 2300 mm Weight approx. 60 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 84 dB(A) Volume flow Nominal volume flow 2500 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Fsdpfjhk S Szex Afpsfu Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Raw air extraction unit ASA 163 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width outside suction socket inlet 160 mm Length approx. 1096 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 400 V Ffsdpfehk S S Eex Afpeu Mains frequency 50 Hz Filter Filter area 2.2 m² Noise emission Sound pressure level max. 83 dB(A) Volume flow Nominal volume flow 2200 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Clean Air Dust Collector RLA 160 For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft For wood shavings and dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³ High extraction performance with minimal space requirements Maximum performance in this class Very quiet Area of application Clean air extraction systems for wood chips and wood dust Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter Can also be used for multiple dust sources High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip containers with clamps and chip collection bags System delivered fully assembled, allowing for quick deployment Mobile Filter description Ultra-compact with maximum filter area Filter material made of polyester fleece Aluminum-coated, washable, and therefore with a long service life. Filter comes standard with an antistatic design, tested and approved according to category M-BIA. Filter resistance monitoring via differential pressure cell, adjustable via a warning light on the control box. The fan is installed downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, residual dust content less than 0.1 mg/m³. Scope of delivery: Metal fan impeller. Inspection opening for cleaning the bypass filter. 5 m connection cable with 5-pin CEE plug and phase inverter. 2 fixed and 2 swivel casters with parking brake. Manual cleaning. Model RLA 160 Item no. 5131620 Technical Specifications Intake manifold diameter 160 mm Nominal flow rate 1448 m³/h Max. flow rate 2400 m³/h Valve pressure at Vnenn 2247 Pa Filter area 9.21 m² Filter material dust class M Residual dust content H3 (< 0.1 mg/m³) Filter cleaning Compressed air supply Chip collection volume 2 x 193 l Mains voltage 400 V Mains frequency 50 Hz Ffjdscnw T Iopfx Afpeu Motor power 2.2 kW Max. sound pressure level 73 dB(A) Dimensions (length x width x height) 1681 x 830 x 1654 mm Weight 254 kg Location: Ex warehouse 54634 Bitburg

Condition: new, Year of construction: 2025, Raw air extractor ASA 141 With standard undercarriage Dimensions and weights Chip collection volume 175 l Nominal width external suction inlet 140 mm Length approx. 1062 mm Width/depth approx. 648 mm Height approx. 2300 mm Weight approx. 40 kg Electrical data Supply voltage 230 V Mains frequency 50 Hz Filter Filter area 1.9 m² Noise emission Sound pressure level max. 78 dB(A) Volume flow Nominal volume flow 1650 m³/h For milling, planing and sawing chips (no dust) Substantially reduced dust content due to BIA-tested filter material with high separation efficiency Fodpfx Afjhk S Swjpofu Housing parts and impellers made of high-strength special plastic Quick release fasteners for filter and chip bags for unproblematic maintenance Robust, high-quality design Easy to move due to swivel castors Low power consumption Suction units comply with dust class L Scope of delivery: System body with mounted fan unit Filter bag / extraction unit chip bag / extraction unit without suction hose

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ffsdpfxev Sk Tmo Afpju Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: new, Year of construction: 2025, RLA 160 Holzkraft Clean Air Dust Extractor For wood dust and shavings, designed for commercial use Item number: 5131620 Brand: Holzkraft Swarf collection volume: 2 x 165 l Nominal diameter of the suction nozzle inlet: 160 mm Length: approx. 1755 mm Width/Depth: approx. 830 mm Height: approx. 1654 mm Weight: approx. 260 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level: max. 73 dB(A) Voltage: Nominal flow rate: 1448 m³/h Dust class: H3 Included: Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with CEE plug 5-pole and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning Item No. 5131620 Ffodjhkzttjpfx Afpju Location: From stock, 54634 Bitburg - Available immediately -

Condition: used, Year of construction: 2025, Filter system, immediately available! NEW in original packaging! 1.1. STfp-rFan DER4 450/550/18.5-2 | incl. backdraft damperExtraction fan, "DER4" series for clean air-side installation, single-sided suction, direct drive. Main design features: Spiral housing made of galvanized steel, pre-configured for horizontal installation in MultiStar series filters IEC standard motor High-performance impeller with backward-curved blades, designed for clean-air extraction operation Suction nozzle with spark protection Impeller made of welded steel, statically and dynamically balanced For explosion protection reasons, the fan is not suitable for conveying explosive dust/air mixtures! Technical data and performance:Volume flow (max. permitted): 15,000 m3/hTotal pressure increase: 3,000 PaInlet nozzle: 450 mm diameterOutlet nozzle: 450 mm x 355 mmDrive motor: 18.50 kW, 3000 rpm at 50 Hz | 3600 rpm at 60 HzVoltage / Frequency: 400 V, 50 HzMotor efficiency class: IE3, Premium EfficiencyWeight, approx.: 330 kgRotation direction: RD 0 1.1.1. STcold conductor 18.5 kW 1.2. STMultiStar VR 6.6-195.25317AMultiStar modular filter system, with vibration cleaning, for installation outside explosion hazard zones. Design features:Galvanized, self-supporting sheet steel constructionPressure surge resistance 200 mbar (type tested, Dekra-Exam 342863200a-23ExA-Sip)Housing negative pressure resistance max. 5500 Pa (avoid fluctuating stress)EU type-tested rupture discsWeather protection cladding of the filter section with inspection door(s) and required number of exhaust nozzles (depending on air volume) Fire resistance EW 90ef, MPA-tested Clean-air nozzle, as per project drawing BG-tested needle felt filter material, suitable for wood and paper dust and many other types of dust Filter bags, externally pressurized, with reusable internal support elements Filter cleaning occurs during operation breaks Expansion chamber for pre-separation The permissible fill level of the expansion chamber strongly depends on the material properties (bulk density, grain size, tendency to form bridges, etc.) and is approximately 400...700mm. Inspection door with viewing window and limit switch Connection shaft for rotary valve, or similar. Technical data and dimensions:Filter area: 195 m²Filter bags: 144 pcsFilter bag length: 2530 mmBag diameter: 170 mmShake-off: 0.18 kW, 400 V, 50 Hz - 1 unitAgitator drive: 1.50 kW, 400 V, 50 HzFootprint, L x W: 2880 mm x 2880 mmSpace requirement, L x W: Space requirement as per system drawingHeight: 9110 mm Additionally included in delivery: Dry fire-extinguishing line, consisting of: o C-hose connection with blind coupling * o Riser pipe from filter base o Distributor pipe system with sprinkler nozzles o Notice sign Note: According to DIN EN 12779:2016 sec. 5.4.2.3, the water connection must be arranged 0.4 m to 0.8 m above the floor and, in the event of a fire, be safe and easily accessible for connecting a fire-fighting hose. The BGHM additionally recommends installing a dirt trap in the riser. The components, installation materials, and labor required for this are not included in the basic price of the dry extinguishing line. These can optionally be provided by the customer or as a custom-built stand = 3000 mm special height. The base frame is not included in the scope of delivery and will be designed and specified separately.1.2.3. Additional S Ffodpfsx U Egrex Afpou

Year of construction: 2020, condition: new, Preinstalled mobil complete system inclusive Impeller juice pump, high efficient gas-boiler, heatexchanger and automatic temperature control. Components: Model on 2 fixed roller for heavy loads and 2 steering roller 160 kW Wolf gas boiler Hot water circulation pump Expansion vessel Automatic temperature control Ffjdpfocl Shvjx Afpju Stainless steel (1.4401) plate heat exchanger Liquefied gas version incl. gas bottle holder and gas pressure regulator Capacity 2000l juice per hour Weight approx. 1000kg

Year of construction: 2009, operating hours: 550 h, condition: used, Preinstalled mobil complete system inclusive impeller juice pump, high efficient boiler, heatexchanger and automatic temperature control. Components: Model on 2 fixed roller for heavy loads and 2 steering roller Fjdpfeclttpex Afpofu 41kW WOLF gas boiler Hot water circulation pump Expansion vessel Automatic temperature control plate heat exchanger Liquefied gas version incl. gas bottle holder and gas pressure regulator Capacity 500l juice per hour Dimensions (LxWxH): 1450x980x1700mm Weight: approx. 468kg

Condition: refurbished (used), Fan RW No. 6 Airflow m³/h 7,500 Drive kW 24.5 / V400 / Hz50 Pressure Pa 8,000 Inlet diameter 355 mm Outlet 400x255 mm Ffedpfx Aowu D D Nsfpsu Closed impeller V-belt drive

Condition: refurbished (used), Year of construction: 1999, Fan RW No. 5 Volume m³/h: 15,000 Drive: 18.5 kW / 400 V / 50 Hz Pressure: 2,600 Pa Fsdpfx Aswu Dywjfpjfu Inlet diameter: 500 mm Outlet diameter: 500 mm Open impeller New bearings Belt drive