Used Frame Saw Sharpening for sale (14,398)

Year of construction: 1987, condition: not inspected (used), Sharpening machine for metal and segmented circular saws. Pjdpfx Aslmkpfsirsrc Circular saw blade diameter from 80 - 710 mm. Tooth pitch adjustable. Tooth height 1.2 - 14 mm. Working speed steplessly adjustable, 15 - 180 teeth/min. Wet grinding system, NC controlled.

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 700x1000x1300 mm Weight 115 kg Pedpjvz Hz Ssfx Airjrc Total power requirement 0,5 kw

Year of construction: 1993, condition: repair required (used), Loroch AK Automat saw blade sharpening machine Year: 1993 Blade diameter min/max: 80/710 mm Pitch: 3-25 mm Type of grinding wheel: Borazon Grinding wheel diameter: 200 mm Drive motor: 0.55 kW Operating speed: 10-45 rpm Coolant system Prsdpfx Ajgtmt Tjirsc Dimensions: 1500 x 1200 x 2300 mm Weight: 750 kg

Condition: not inspected (used), I sell the saw blade and saw band sharpening machine Stankoimport TCPA-6, Made in Russia. Podpfed Hx R Dox Airerc

Condition: used, Clearance sale: 6 grinding spindles, used, in very good condition, 4 of which have been refurbished. Suitable for Vollmer CHD 250 or 251. Can also be purchased individually. No guarantee/warranty/returns. Psdpfx Aiexw Nqqerorc

Condition: good (used), Alber sharpening machine for band saw blades Blade width 50 - 206mm Pjdpeglui Aefx Airsrc Tooth pitch 20 - 50mm

Condition: new, Year of construction: 2026, For sawing pipes and solid materials made of high-grade and tool steel. Two band speeds via a pole-changeable motor. Robust gearbox with hardened and ground shaft. Precise and robust band guides with adjustable carbide plates. Longer service life of the saw band due to a 25° saw arm inclination. Efficient coolant application to the saw band guides. Electromechanical monitoring of the saw band tension; if deviations occur, a microswitch switches off the machine. Chip removal brush for optimal cleaning and maintenance of the saw band. Operation of the semi-automatic machine: Pjdpfx Aijd Hx Uqjrjrc Automatic workpiece clamping after the start of the cutting cycle. Execution of the sawing cut with the selected band speed. Automatic stop of the lowering movement and the saw band in the lower end position. Automatic retraction of the saw arm to its upper end position. Vise opens automatically. The operator only needs to move the material. Equipment: Two band speeds Cutting feeler Coolant system Chip removal brush Saw band tension monitoring Swiveling control panel Length approx. 1860 mm Width/Depth approx. 1045 mm Height approx. 1750 mm Weight approx. 405 kg Drive power Power consumption 1.5 kW Electrical data Connection voltage 400 V Machine data Saw band speed(s) 20 - 100 m/min Speed stages continuously variable Saw band length 2720 mm Saw band width 27 mm Saw band thickness 0.9 mm Cutting angle +60 – -45 ° Cutting ranges 0° round (pipe) 230 mm 0° round (solid material) 150 mm 0° rectangular lying (hollow profile) 280 x 180 mm 0° bundle (pipe) 180 x 120 mm -45° round (pipe) 195 mm -45° round (solid material) 110 mm -45° rectangular lying (hollow profile) 180 x 170 mm -60° round (pipe) 125 mm -60° round (solid material) 80 mm -60° rectangular lying (hollow profile) 120 x 100 mm +45° round (pipe) 185 mm +45° round (solid material) 110 mm +45° rectangular lying (hollow profile) 180 x 120 mm Feed Table height material feed 785 mm Min. remaining workpiece length 22 mm

Condition: used, Year of construction: 2000, operating hours: 38,547 h, functionality: fully functional, machine/vehicle number: 1, grinding wheel diameter: 125 mm, total width: 950 mm, total length: 1,250 mm, total height: 1,870 mm, type of input current: three-phase, input current: 4 A, year of last overhaul: 2018, input frequency: 50 Hz, grinding height: 24 mm, grinding spindle motor power: 2,400 W, input voltage: 400 V, overall weight: 950 kg, grinding spindle speed: 3,972 rpm, spindle speed (max.): 3,972 rpm, The machine is equipped with a second pusher that allows for adjustable single-pass sharpening of the cutter and includes automatic coolant mist extraction. It has always been operated with cooled oil and cleaned with a COMAT machine. Operating speed [mm/s] 0.5–20 mm/s Saw blade diameter [mm] 80–500 mm Prsdozwhuhspfx Airsc

Year of construction: 2005, condition: good (used), Engine power kW: 1.1 Weight kg: 300 Stepless adjustment of the rake angle of the grinding wheel Prsdpfx Aishqcmusrjc Integrated dust / spark extraction

Condition: used, Year of construction: 1998, functionality: limited functionality, machine/vehicle number: 012729, overall weight: 920 kg, tooth pitch: 45 mm, total height: 1,680 mm, coolant pump power: 210 W, grinding wheel diameter: 250 mm, input voltage: 400 V, spindle speed (max.): 2,600 rpm, input frequency: 50 Hz, ISELI SBW Automatic Bandsaw Blade Sharpening Machine – Used For Sale – ISELI SBW Automatic Bandsaw Blade Sharpener Used ISELI SBW automatic sharpening machine for bandsaw blades, suitable for sawmill and industrial applications. The machine was used in our sawmill exclusively for sharpening our own bandsaw blades and was fully operational and in regular use right up until the day it was disconnected. The machine is fitted with 3 interchangeable cams for different tooth shapes. Please note: The tooth pitch adjustment is no longer operational. The machine is currently set to a fixed 45 mm tooth pitch, which was the pitch used in our sawmill. Technical Specifications Manufacturer: ISELI & Co. AG, Switzerland Pjdpe Abaldefx Airerc Model: SBW – Wet Grinding Grinding motor: 0.75 kW Driving motor: 0.30 kW Height adjustment motor: 0.37 kW Feed motor: 0.11 kW Cooling water pump: 0.21 kW Spray suction: 0.75 kW Tooth height: 6–25 mm Tooth pitch: Fixed at 45 mm (adjustment not operational) Rake angle: 5°–35° Blade width: 60–350 mm Blade length: 6,200–9,500 mm or 8,500–12,000 mm Sharpening speed: 20–40 teeth per minute (variable) Grinding wheel diameter: 200 or 250 mm (Borazon/CBN) Grinding wheel bore: 25 mm Grinding wheel widths: 6 / 10 / 12 / 13 mm Grinding spindle speed: 2,600 RPM Machine height: 1,680 mm Net weight: 875 kg without blade support / 920 kg with blade support Approximate export packing volume: 4.5 m³ Condition Used machine in working condition. Previously operated in a working sawmill for our own blade maintenance, rather than commercial sharpening. The machine has not been tested since disconnection. Important: Sold as a used machine with a fixed 45 mm tooth pitch. Three tooth-profile cams are installed. Available for inspection by arrangement. Please contact us for further information or additional photographs.

Condition: new, 1 brand new horizontal bandsaw machine with a swiveling frame and double miter capability (R/L) Manufacturer: HUVEMA / BEKA-MAK, Origin Turkey Model: HU 230 DG-4 Cutting range: Round 230 mm Rectangular 320 x 130 mm Square 230 mm -45° Round 180 mm -45° Flat 230 x 100 mm -45° Square 150 mm +45° Round 210 mm +45° Flat 230 x 160 mm +45° Square 180 mm +60° Round 120 mm +60° Flat 120 x 100 mm +60° Square 100 mm Working height 760 mm Motor power, main drive 1.0 - 1.3 kW, 400 V, 50 Hz Motor power, coolant pump 0.12 kW 2 speeds 35 / 70 m/min Saw blade dimensions 2730 x 27 x 0.9 mm Dimensions L x W x H 1350 x 700 x 1300 mm Weight 415 kg Accessories / Special features: • Double miter capability through a swiveling frame o The material to be cut remains straight in space! o No need to turn the material for miter cuts! o High efficiency with enormous time savings! • Adjustable precision stops 0°, 45° and 60° on the left and 45° on the right • Interchangeable work table • Quick-release vise, can be shifted to the left and right • Adjustable length stop 500 mm for cuts of the same length • The lowering of the saw arm is regulated steplessly by a hydraulic cycle • Coolant system • Chip brush • Swiveling control panel • Electric safety switch for blade tension and saw blade guard • Automatic shutdown at the end of the cut • Emergency stop switch • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund-Wambel / Germany Psdofk Ew Eepfx Airjrc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100x1500x2100 mm Prsdpfxev A Hgwj Airoc Weight 800 kg Total power requirement 3 kw

Year of construction: 2005, condition: excellent (used), CATALOGUE NUMBER 8004 TECHNICAL DATA - max. disc diameter: 350 mm - disc bore diameter: 30 mm - mitre cutting capability: 45° - max. cutting height: 100 mm - max. workpiece width: 100 mm - mitre cutting: right/left - dust extraction port diameter: 2x80 mm - motor: 3.7 kW - machine dimensions (L/W/H): 1830x760x1610 mm - weight: 308 kg ADVANTAGES - Suitable for cutting window frame strips - Used saw - Very good condition Net price: 10900 PLN Net price: 2535 EUR, depending on the exchange rate of 4.30 EUR Prodpfx Aiozxhhqjrsc (Prices are subject to change due to significant fluctuations)

Condition: new, Year of construction: 2026, functionality: fully functional, power: 15 kW (20.39 HP), cutting height (max.): 250 mm, cutting width (max.): 150 mm, saw drive: 15,000 W, warranty duration: 12 months, The POWER Plus Thin Cutting Frame Saw was developed to be affordably priced for companies with medium to small production needs. The machine has a sturdy, solid cast iron base and is equipped with a 15 kW (20 HP) main motor. The Frame Saw cuts solid wood blocks into gluable slats with minimum saw kerf waste. The machine can run products up to 150 mm in width and 250 mm in height. The POWER Plus Thin Cutting Frame Saw provides the smaller manufacturer a high performance and quality machine for the production of their veneer slats/lamellas; all for an affordable price. Applications of use: Parquet and engineered flooring, doors, windows, stairs, furniture, musical instruments, pencils, sport equipment (ski, snowboards, hokey sticks), wooden-covers for fruit and vegetables, etc. Features: Prjdpfx Aijy Rk Umerjc High precision lamellas with gluable surface in tolerance ± 0.1 mm, depending on lamellas width The "Plus" System is designed for quick set-up and easy adjustment of the top pressure rollers via electrical motor Air Blast system located directly behind the saw blades keeps the saw blades clean and prevents heat build-up Automatic Opening of the machine for safe and easy removal and installation of the saw frame Sturdy and durable Cast Iron Saw Frame Carriage no play mounted on linear guides Feed roller movement is synchronized with the up/down movement of the saw frame Modular Infeed can accommodate a center guide, side guide or channel system Chip Breaker prevents splintering on the bottom side of the wood Solid cast iron machine construction minimizes vibration Top and Bottom Driven Feed Rollers Automatic Central Lubrication Unit Solid Steel Crank Arms On demand Features: Top and Bottom Planing Module on machine outfeed Air Jet system for cooling with extra ventilator Top Planing Module on machine infeed Automatic Hopper Feeder Wet Way Cutting Option Blades Tension Master

Condition: used, Year of construction: 1987, No. 3186 Frame saw / gang saw MÜLLER VGU / 4/71 Used, year of construction 1987 Passage 710 mm Drive motor 75 kW Hydraulic belt tensioning Manual width adjustment Including hydraulic clamping carriage, riving knife, gauges for width adjustment, electrical control cabinet, various saw blades Sale on behalf of customer, ex location near 47051 Duisburg, without dismantling, without transport and assembly Pjdpjvcqansfx Airjrc Errors in description and price excepted Dismantling, transport and loading by us optionally possible In order to avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Images and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, saw blade diameter: 850 mm, saw blade bore: 10 mm, TECHNICAL DETAILS Saw Blade Diameter (without loader): 80 – 850 mm Saw Blade Diameter (with loader): 250 – 450 mm Bore Diameter (from): 10 mm Saw Blade Magazine: Up to 40 pieces Control and Software Prodpfoypbx Eex Airoc Control: Industrial PC with Siemens standard PLC Software: For all tooth geometries, including special profiles Grinding Process Sequence 1st Step: After starting, the vacuum gripper picks the top saw blade from magazine 1 and transfers it to the Woodtronic NC4; the cover opens. 2nd Step: Loader returns. The Woodtronic NC4 closes and the grinding program starts. The loader removes the intermediate ring from magazine 1 and loads it into magazine 2. Wait position. 3rd Step: After grinding and opening of the Woodtronic, the loader takes the sharpened saw blade and transfers it to magazine 2. Process Repetition Steps 1 to 3 are repeated until the grinding cycle is complete. Pre-programming possible: The grinding operation continues without interruption, even while programming the next magazine. The Woodtronic NC4 can be preprogrammed during the day and will grind automatically overnight. Measurable with WALTER Saw Check: Rake angles, clearance angles, diameter, number of teeth Tooth geometry: manual input required MACHINE DETAILS Operating hours: 4,197 h (according to previous operator, information unverified) FEATURES - Automatic loader - Walter Saw Check - Measuring device for carbide-tipped circular saw blades

Year of construction: 1980, condition: used, Passage width: 560 mm Passage height: 560 mm Stroke: 600 mm Maximum speed: 320 1/min The gantry system is fully mechanized and equipped with a new Moehringer quick-feed system. Psdscvhndspfx Airorc

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 29 kg Predpjv A Hhhsfx Airjc Total power requirement 0,25 kw

Condition: excellent (used), Year of construction: 2003, Veneer saw Langzauner LZ 5/2 - 3500, precision cutting saw with jointing unit (planer unit) and veneer support table Robust machine construction by Langzauner A video of the machine in operation can be sent upon request. Prodpfo Afznuex Airec For tear-free and gap-free cutting of veneer, including thick veneer Cutting length max. 3500mm Cutting and jointing height max. 40mm Easy-to-guide unit, runs on two hardened, ground linear guide shafts Rear support table with continuous finger stop, adjustable from approx. 2 - 56cm, with pneumatic clamping and digital display The crosscut table is very solidly constructed and runs on parallel circular guides; it is slightly offset to the right so that crosscuts can be made on the left side of the veneer packs Angle stop on the support table and on the front support for end cuts of the veneer packs Special equipment with rack-and-pinion compensation for the pressure bar, which prevents the pressure bar from tilting pneumatic workpiece clamping, also holds in the center position Drive motor saw 2.2kW, milling unit 1.1kW The motors can be easily switched on at the handle, so they only run when needed. When switched on, the saw and the milling unit are automatically engaged by compressed air; the cutting height can be selected in three positions using a turret stop. Carbide-tipped precision cutting blade, sharpened Planer head Z4 with pull-cut, equipped with new carbide inserts and spare blades included Practical front veneer support, automatically extended pneumatically when the planer unit is used Dust extraction connection 150mm with dust extraction channel V-belt renewed CE marking Emergency stop cable Operating manual Onboard tools Original paint, only a few spots have been touched up The machine is in excellent condition and has obviously only been used rarely. Dimensions approx. 5050 x 1500 x 1450mm (LxWxH). Weight approx. 1000kg. The machine can be demonstrated on site by appointment. We only offer machines that are available in our warehouse and ready for demonstration; see "other offers from this provider".

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Predpfx Aijz Hb Nberoc

Condition: good (used), Code: 0347 Brand: CENTAURO Model: CO 800 - CE Standard Band saw with covered wheel for cutting wood materials, joinery, furniture, furnishings, window frames, plastics, aluminum, composite materials and various - CE Standard Pjdpfx Ao Agaxpoirsrc Technical data: Cast iron flywheel diameter mm 800 Max cutting height mm 520 Height of table from floor mm 960 Table dimensions mm 1170 x 800 Max blade length mm 5670 Motor Hp 5,5 Tilting work table Telescopic blade guard N° 2 suction inlets diameter 120 mm Overall dimensions: mm 1550 x 850 x 2500 h Weight kg 630

Condition: new, Year of construction: 2026, The CORMAK HBS260 metal bandsaw for cutting pipes, profiles and bars is widely used in locksmith and metalworking workshops where precision, quality and cutting speed are essential. The model features a pivoting arm from 0° to 60°. The frame design ensures precise and quiet operation. It has a removable chip tray for easy cleaning! Machine characteristics Predpfx Aij Agwkxorsc The CORMAK HBS260 horizontal metal bandsaw with a pivoting arm enables cutting perpendicular to the material axis and at any angle within the range of 0° to 60°. The material can be fed manually or by any mechanical device, while the tool feed operates automatically. The blade guides are fitted with special carbide plates and bearings, which have a significant influence on the blade’s guidance, service life, straightness, accuracy and cutting quality. The carbide guidance system greatly reduces machine and blade wear. The machine is equipped with an efficient coolant pump with a closed coolant circulation system. The saw arm is made from a single cast-iron element, and with the use of a 27 mm wide cutting blade, it enables series cutting of both profiles and solid materials. The vice is mounted on an adjustable base and features a quick-clamping system. The blade guides are fitted with hard metal (carbide) plates and rolling bearing systems. These carbide guides are responsible for the cutting precision and straightness. The upper part of the base is shaped as a tray for draining coolant and collecting chips generated during the cutting process. The base is fitted with a cast-iron worktable with a pivoting arm and a control panel mounted on a separate arm. In the cutting process, the main cutting motion is the movement of the cutting blade, while the feed is achieved by lowering the arm. The arm lowering speed (cutting speed) is controlled by a hydraulic cylinder. The feed rate is regulated via the saw’s control panel. Two blade speeds are available: 35 and 70 m/min. When the arm reaches its lower position (after the cut), the drive to the cutting blade is automatically switched off. Safety is ensured by blade guards and micro-switches that stop the motor after the cutting cycle or when any guard is opened. Additional protection automatically switches off the bandsaw in the event of blade breakage. Blade size [mm] 2520 x 27 x 0.9 Blade tension mechanical (manual) Blade speeds [m/min] 35, 70 Arm lowering control stepless – hydraulic cylinder Vice base height [mm] 860 Saw wheel diameter [mm] 300 Saw frame swivel [°] 0–60 Power supply 1-phase 230V Main motor power [kW] 1.1 / 1.5 Coolant pump motor power [kW] 0.05 Dimensions with base [cm] 150 x 80 x 140 Weight [kg] gross/net – 210 / 180 kg

Condition: used, Year of construction: 2022, HORIZONTAL PANEL SIZING SAWS GABBIANI P KEY FEATURES INDIVIDUALLY SELECTABLE AIR CUSHION TABLE: AN INDISPENSABLE TOOL LATERAL SAFETY DEVICES: MORE SPACE FOR WORKING FLOATING CLAMPS: THE GUARANTEE FOR A PERFECT CUT TECHNICAL DATA GENERAL SPECIFICATIONS gabbiani p80 Saw blade overhang mm 80 Work table height mm 950 Number of clamps standard 5 Number of clamps maximum for versions 33 9 CUT DIMENSIONS Version 33 (Opt.) mm 3300x3200 AXIS SPEED Variable saw carriage speed m/min 6 – 60 Variable slider speed () m/min 60 MAIN SAW BLADE Motor power (S6 -40%) - 50hz (Star-delta start) kW (HP) 7 (9) (11) Speed – 50 hz U/min 4650 Saw blade diameter mm 340 Arbor diameter main saw blade mm 80 SCORING SAW Motor power (S6 -40%) - 50hz kW (HP) 1,5 (2) Speed – 50 hz U/min 5850 Scoring saw diameter mm 200 Arbor diameter scoring saw blade mm 80 INSTALLATION Installed power Kw 12÷15 Base machine voltage Euro Voltage (400 V / 50 hz) Compressed air requirement l/min 300 Required compressed air pressure bar 7 Extraction air requirement m3/h 2190 Extraction air speed m/sec 20 Extraction port diameter mm 4x120 () Note: for countries where EC standards apply, the forward feed speed of the slider is limited to 25 m/min. GENERAL FEATURES Automatically controlled horizontal panel sizing saw with PC/PLC control, for cutting panels made of solid wood, MDF, chipboard, plywood and similar materials. Machine frame and work table - Machine frame made as a steel tube construction - Work table made of rib-reinforced steel with Bakelite coating - Longitudinal stop on the left side Saw carriage made of steel, consisting of: - a motor for the main saw blade and a motor for the scoring saw blade - Vertical stroke of the saw blade on linear ball bearing guides and shoes - Running rollers made of hardened and ground steel - Balanced mass distribution to ensure the best cutting quality - Running direction against the longitudinal stop - Saw carriage drive via rack and pinion - Carriage run on cylindrical guides - Cylindrical guides made of hardened and ground steel (5-year guarantee), protected by special dust scrapers - Pneumatic switch for quick and safe changing of the main saw blade and the scoring saw Pressure beam - Pressure beam with uniform pressure on the workpiece over the entire cutting length with recesses to prevent collisions with the clamps; pneumatic height adjustment via high-precision racks and pinions, pressure adjustable from 1.5 to 6 bar - Double extraction system with a unit above the pressure beam to clean the work table and a unit below on the saw carriage - Lateral automatic aligner with pneumatic cylinder over the entire length. Sliding on linear ball bearing guides and shoes. * Travel: 1200 mm * minimum working width: 60 mm * maximum working width: 1200 mm Positioning slider and rear part of the machine - Positioning slider over the entire length with motor drive via a robust shaft. Positioning slider movement on a double T-beam. The drive is via 2 precision pinions, which guarantee constant parallelism between the slider and the cutting line. The slider is controlled by a brushless motor to enable the regulation of the speed according to the requirements for positioning and a quick return - Stepless dru Podpfxjz Ehvxo Airjrc

Condition: excellent (used), For sale: a professional, German-made MEBAeco 335 DG band saw from the highly regarded Eco-line series. This is a two-column machine with exceptional rigidity, designed for precise and efficient cutting of steel, profiles, and solid materials. The machine is in full working order, ready for use, and was used in a clean workshop (visual and technical condition can be seen in the photos). Why MEBAeco 335 DG? • Two-column construction (linear guides): Ensures perfect cutting geometry, minimal vibration, and significantly longer cutting blade life compared to frame-type machines. • Double-sided angle cutting (DG system): Rotating table system – when changing the angle, the machine table is not notched! The vise automatically adjusts to the selected angle and always firmly holds the material close to the cutting line. • Full semi-automatic operation: After pressing start, the machine performs the cut, raises the arm to the set height, and opens the vise. • Smooth blade speed adjustment: Control via a frequency converter allows you to perfectly adjust the speed to the type of steel (from stainless steel to black steel). Pjdpe Adytaefx Airorc CUTTING PARAMETERS: • 90°: round Ø 335 mm | rectangle 500 x 335 mm • 45° to the right: round Ø 330 mm | rectangle 320 x 335 mm • 45° to the left: round Ø 305 mm | rectangle 305 x 335 mm • 30° to the right: round Ø 180 mm | rectangle 170 x 335 mm TECHNICAL DATA: • Motor power: 3.0 kW • Blade dimensions: 4400 x 34 x 1.1 mm • Blade speed: continuously variable, 15 – 150 m/min (frequency converter) • Machine weight: approx. 1020 kg (massive, stable construction) • Equipment: Ergonomic control panel, integrated cooling system, brush for cleaning the blade from chips, built-in feed roller. ADDITIONAL INFORMATION: The machine can be viewed and tested on-site. We can assist with loading (forklift available). Price: 6200 euros (negotiable / VAT invoice available)

Condition: as good as new (ex-display), Year of construction: 2026, For sale is a new, automatic bandsaw BEHRINGER HBE321A Dynamic, manufactured in 2026. This machine is our demonstration unit – it has been assembled and connected in our facility. You can view the machine in person, test it, and perform trial cuts with various materials. The BEHRINGER HBE321A Dynamic is a modern, fully automatic bandsaw designed for precise and efficient metal cutting. The machine is suitable for cutting solid material, pipes, and various profiles, as well as harder-to-machine metals. Key Information Manufacturer: BEHRINGER Model: HBE321A Dynamic Year of Manufacture: 2026 Condition: New / Demonstration Machine Type: Automatic Horizontal Bandsaw Cutting Capabilities Round material 90°: Ø 320 mm Rectangular material 90°: 350 × 320 mm Minimum dimension of round material: Ø 10 mm Minimum dimension of rectangular material: 10 × 8 mm Automatic feed stroke: 650 mm Minimum remaining material in automatic mode: 70 mm Technical Specifications Cutting blade speed: 15–110 m/min Prodjz A R Ncepfx Airsc Cutting blade dimensions: 4440 × 34 × 1.1 mm Main motor power: 2.6 kW Total power: 3.7 kW Saw feed: servo drive with ball screw Material feed: ball screw Material clamping: hydraulic Blade cleaning: electrically powered chip brush Control and Automation The machine is equipped with the BEHRINGER BehrCtrl10 touch control system, which allows for convenient control of the automatic cutting process. The servo-controlled saw feed with cutting pressure control automatically reacts to the changing cross-section of the material. The automatic blade guide adjusts to different material dimensions, eliminating the need for manual adjustment when changing workpieces. Construction and Equipment BehrCtrl10 touch control Automatic material feed Servo-controlled saw feed Cutting pressure control Automatic blade guide Hydraulic material clamping Dual material clamping Electric blade cleaning brush Fully enclosed work area The robust cast iron saw frame reduces vibrations and helps ensure stable and accurate cutting. The manufacturer also states that the modern gear and hydraulic solutions used in the HBE Dynamic series reduce energy consumption compared to the previous generation model. Dimensions and Weight Length: 1850 mm Width: 2300 mm Height: 1880 mm Weight: approximately 1900 kg Material feed height: 800 mm If you have any further questions, please do not hesitate to ask.