Used Frequency Former for sale (6,010)

Condition: new, turning length 1500 mm turning diameter 560 mm turning diameter over slide 350 mm turning speeds 25-220/220-1500 U/min swing diameter over bed slide 350 mm turning dia. in gap 785 mm quill travel 185 mm spindle bore 105,0 mm engine output 7,5 kW spindle taper DIN 55029 D 1-8 quill: 5 MK weight of the machine ca. 2420 kg. range L-W-H 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light Gsdpfx Aexaau Ejatjbt - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change tool holder with 4 inserts - Change gears - Reduction sleeve - Chip back wall - Operating tool

Condition: used, Year of construction: 2007, bore capacity in steel (diameter) 40 mm arm length 1050 mm turning speeds 15 - 2800 U/min feed range 0,075 - 0,45 mm/min dimensions 2450 x 1300 x 2300 mm Weight 1500 kg Equipment: Machine in top condition 2026 serviced and repaired by the factory customer service Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device Gbjdoy Nd T Hepfx Aatjt - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60 ? 40 GG 22 ? 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % ED. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7,5 / 7,5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 3 (X, Y, Z, ) Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides readable from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X,Y,Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphic Graphic display of drilling patterns

Condition: new, cutting diameter 300 mm capacity 90 degrees: flat 330 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm capacity 45 degrees: flat 270 x 200 mm capacity 60 degrees: round 180 mm capacity 60 degrees: flat 170 x 170 mm height of material-table 600 mm Pitch min/max 50.000 mm vice 335 mm Öffnung band speed 15 - 100 m/min automatic feeds 600 mm dimensions of saw-band 3650 x 27 x 0,9 mm Gbjdpfx Aaoxab S Eotet total power requirement 2,2 kW weight 1.105 kg range L-W-H 3,3 x 2,83 x 2,23 m electro-hydraulic band saw fully automatic, with additional : * semi-automatic * semi-automatic-dynamic * manual .. operation Description: - robust electro-hydraulic band saw fully automatic (INDUSTRY) * MEP - WINDOWS numerical control unit * User interface with 7” touch screen display * mechanical buttons for the sawing machine’s operating functions * guarantees reliable operation, simple and intuitive * real-time control of all cutting parameters * pivoting arm enables comfortable and safe operation * display and recording of alarm and error messages - miter cuts with automatic cycle from 0° to 60° left - semi-automatic, semi-automatic-dynamic and manual cycle * miter cuts from 45° right to 60° left - manual or semi-automatic dynamic cycle selectable * to make cuts without programming - protective housing for the safety of the worker - continuous regulation of the cutting speed from 15 to 100 m/min * via frequency converter (inverter) - Latest generation hydraulic unit * extremely powerful with low energy consumption. - Material feed with stepper motor via ball screw * mounted on opposing ball bearings * Single stroke 600 mm repeatable to saw any length. - Positioning of the saw head and movement of the feeder using a joystick. - Automatic detection of the cutting start position - Manually operated band tension control with display * using an electronic converter - Automatic monitoring of the cutting load * using a servo valve mounted directly on the cylinder - The coolant tray is built into the base frame - Chip removal brush - Bimetal saw band for solid and profile material - Tools and operating instructions with spare parts list * Angularity = 2/12 degrees * Length accuracy = plus/minus 0.1 mm per feed SPECIAL ACCESSORIES INCLUDED: - MEP LubeCut micro dosing device

Condition: new, turning length 1000 mm turning diameter 420 mm swing diameter over bed slide 255 mm turning dia. in gap 580 mm spindle bore 52.0 mm turning speeds 30-550 / 550-3000 U/min bed width 250 mm spindle taper 55029 D 1-6 taper in tailstock 4 MK quill travel 140 mm total power requirement 5.5 kW weight of the machine ca. 1145 kg. range L-W-H 2090 x 1050 x 1600 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - 3-jaw steel chuck PO3-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Foot pedal with brake function according to CE - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Turret stop with fine adjustment - Frequency converter - Initial filling with Shell Tellus 46 - Coolant system - Slip clutch - Thread gauge - LED machine light - Change gears - Reducing sleeve Gbodjxaakyepfx Aatjt - 2x centering tips - Chip back wall - Operating tool

Condition: used, Year of construction: 2014, power: 30 kW (40.79 HP), WEIMA WLK 800 – 30 kW – Single-Shaft Shredder – 2014 For sale: professional WEIMA WLK 800 single-shaft shredder, manufactured by the well-known German company WEIMA Maschinenbau GmbH. The machine is designed for shredding various types of materials and industrial waste. The WLK series features a robust, heavy-duty construction designed for continuous operation in recycling and manufacturing facilities. Technical specifications: Gbodpfx Aezv Th Roatjt • Manufacturer: WEIMA Maschinenbau GmbH, Germany • Model: WLK 800 • Year of manufacture: 09/2014 • Serial number: 510-1282 • Rotor width: 800 mm • Motor power: 30 kW • Voltage: 400 V • Frequency: 50 Hz • Rated current: 70 A • Rotor speed: 90 rpm • Machine weight: approx. 2.8 t • CE marked Applications The WEIMA WLK 800 can be used for shredding, among other materials: • plastics, • PE, PP, HDPE and LDPE materials, • plastic pipes and profiles, • production waste, • wood and wood-based materials, • packaging, • containers and crates, • other industrial waste suitable for single-shaft shredding.

Year of construction: 2018, condition: used, frequency 500 kHz Power 50 KW control SIEMENS - S7-200 Hardening Unit - Induction | SAET - 3RALA equipped with a FANUC Robot Gjdpfxex Sznao Aatsbt The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 3 RALA |3-RALA

Condition: used, Field of application: Mining Experience unparalleled efficiency with Polygonmach's Mobile Dewatering Screen and Hydrocyclone, part of our revolutionary range of mobile crushing and screening plants on wheels. Polygonmach, an industry-leading brand, is committed to redefining the standards of construction and mining industries with its cutting-edge technologies. The Polygonmach Mobile Dewatering Screen and Hydrocyclone is an exceptional solution that offers high-efficiency classification and separation of materials, a must-have for operations dealing with a variety of mineral ores, aggregates, and recyclables. This mobile system is crafted to effectively dewater and separate fines, providing a consistent, saleable product. The dewatering screen works by removing the water from your washed sand and other materials, while the hydrocyclone ensures precise and efficient classification and separation. Godpfxsx Dh S To Aatsbt Our hydrocyclone technology ensures precise and rapid grading. Its centrifugal motion enables it to separate heavier particles, improving product purity. This is paired with our dewatering screen that offers high-frequency vibration, ensuring effective dewatering for a dry, high-quality end product. As part of our ethos to deliver user-friendly solutions, the Mobile Dewatering Screen and Hydrocyclone system is designed for easy operation and maintenance. It comes with hydraulic legs for convenient positioning and a robust design capable of withstanding challenging working conditions. What sets the Polygonmach mobile system apart is its ability to deliver high throughput and efficiency while ensuring the quality of the final product. Applications: construction Type: centrifugal, mobile Material: for bulk materials Other characteristics: high-frequency, dewatering, high throughput net weight: Min.: 6,100 kg(13,448 lb)Max.: 10,200 kg(22,487 lb) engine power: Min.: 3.6 kW(4.89 hp)Max.: 9 kW(12.24 hp)

Condition: new, Year of construction: 2025, bore capacity in steel (diameter) 35 mm throat 300 mm bore stroke 150 mm bore capacity in cast iron (diameter) 40 mm thread capacity M 27 spindle taper MT 4 spindle speeds: Stufenlos 100 - 2000 U/min column diameter 125 mm automatic feeds 3 / 0,1 - 0,2 - 0,3 table: 400 x 420 mm Gbjdpevzhd Ujfx Aatjt Drive Keilriemen total power requirement 3 kW weight of the machine ca. 360 kg dimensions of the machine ca. 760 x 600 x 2000 mm Column drilling machines - V-belt drive with foot switch - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant device - Machine light - height-adjustable chip protection disc with micro switch - fixed table - CE marking

Condition: used, Year of construction: 1998, functionality: fully functional, type of input current: three-phase, cutting height (max.): 160 mm, cutting width (max.): 450 mm, saw blade diameter: 450 mm, working width: 870 mm, track width: 450 mm, chain width: 450 mm, disc diameter: 450 mm, – very good condition – manufactured in the Czech Republic – year of manufacture: 1998 TECHNICAL SPECIFICATIONS: – track width: 450 mm – cutting height: 160 mm – max. blade diameter: 450 mm – main motor power: 45 kW Gbjdjxtabxspfx Aatst – min. cutting length: 800 mm – max. input material width: 870 mm – shaft diameter: 65 mm – sleeve diameter: 80 mm – feed adjustable via frequency inverter – feed speed range: 4-40 m/min – three rows of anti-kickback pawls – connection spigot diameter: 300 mm – dimensions (L/W/H): 240 x 210 x 200 cm – weight: 3300 kg

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 215 mm, spindle bore: 41 mm, turning diameter over bed slide: 380 mm, turning length: 1,000 mm, total length: 2,900 mm, total width: 1,050 mm, total height: 1,410 mm, spindle speed (max.): 2,800 rpm, spindle speed (min.): 30 rpm, overall weight: 2,000 kg, Equipment: rotational speed infinitely variable, The lathe underwent a general overhaul in 2011 by M-MOOS spol. s.r.o. During the overhaul, it was fitted with an Omron Varispeed 7 frequency converter for convenient speed regulation during operation and to reduce current surges. The lathe's accessories include: a fixed and a movable steady rest, a faceplate, 2 chucks, a clamping angle, a rotating center for the tailstock (Morse 4), a micrometric stop for longitudinal and transverse feed, 1 coolant system with a pump, and an operating manual. Technical parameters: swing over bed 380 mm, swing over carriage 215 mm, distance between centers 1000 mm, bed width 340 mm, spindle bore 41 mm, spindle taper metric 50, tailstock center taper MORSE 4, spindle speed range 30 - 2800 rpm, main DC motor power 10 kW, maximum machine dimensions: length: 2900 mm, width 1050 mm, height 1410 mm, machine weight 2000 kg. The overhauled lathe was used for maintenance purposes by a large manufacturing company. The machine can be tested in our warehouse in Přerov by appointment. Gjdpezy Shwofx Aatebt

Condition: used, Year of construction: 2018, Second-hand machine Year of manufacture: 2018 Special feature: Machine with a gluing height of up to 100 mm! Condition: factory-inspected by Lange Maschinenbau Features and technical specifications: - Machine table with 13 rollers for improved workpiece guidance - Edge feed, operating in synchronisation with the belt feed - Edge thickness adjustable via digital display - Pneumatic roll separation with blade (for edges suitable for cutting) Gbedpfszk Nmrjx Aatjt - three pressure rollers - Belt feed: - 0.25 kW - approx. 1,250 mm long – approx. 6.0 m/min - 50 mm wide toothed belt with a thick rubber lining to protect the workpiece - Digital display for height adjustment - Direct glue application to the workpiece: leak-proof glue tank with glue supply from below and rapid heat-up time after machine shutdown - Flush-trimming unit: - for the front and rear edges of the workpiece - automatic workpiece detection - Pneumatic trimming with a blade for sharp-edged cuts - Flush milling unit - with vertical scanning and horizontal guidance - Reproducible adjustment via digital displays - 2 powerful 0.4 kW high-frequency motors - continuously adjustable from 4,000 to 18,000 rpm - Cutter Ø 70 mm, Z4, radius 2 mm/15° - central extraction connection Ø 100 mm - 2 chip extraction hoods with hose Ø 60 mm - Automatic height adjustment of the upper milling cutter via the belt feed - Workpiece support surface approx. 1800 mm long throughout - Workpiece support rail, extendable by approx. 300 mm - Rotating film tray Ø: 800 mm - Workpiece width: min. approx. 80 mm - Workpiece thickness: 10 – 100 mm - Workpiece length: min. approx. 220 mm - Edge thickness: 0.4 – 2.0 mm - Roll cutting: max. 1.0 x 55 mm, 2 x 45 mm - Glue pan heating capacity: 2.7 kW - Heating-up time: approx. 10 minutes - Working height: approx. 880 mm - Electrical connection: 400 V, 50 Hz, 3-phase + N - Total power requirement: 3.8 kW - Pneumatic connection: 6 bar Dimensions (excluding film tray): approx. 1800 x 700 x 1300 mm Weight: approx. 260 kg Availability: at short notice Storage location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2019, machine/vehicle number: S1AJM3HKC00022X, ID UC04 Gbsdpfxjg Twgmo Aatet SAMSUNG ULTRAASOUND HS40 FOR MULTIPURPOSE ULTRASOUND IMAGING; S/N: S1AJM3HKC00022X; year of manufacture: Dec 2019 Attention: The ultrasound machine is sold with a single CF4-9 micro convex probe. The rest of the probes are missing but can be bought separately depending on the need. System Version: 1.03.01 - Scanning modes: 2D / M / PW / C / PD - Biometry Assist - Active licenses: Multivision / DICOM / HQ Vision - Sony UP-X898MD Hybrid Graphic Printer 201SAMS0004 Samsung HS40 OB/GYN ultrasound, powered by CrystalLive Samsung HS40 Dimensions and Weight: • Height: 1,354 ~ 1,620 mm (with monitor) • Width: 520 mm • Depth: 730 mm • Weight with monitor: 54 kg ( 119lb.) Samsung HS40 Specifications: • Digital beam former • Displayed imaging depth: 0 – 38 cm (probe dependent) • Minimum depth of field: 0 – 2 cm (probe dependent) • Maximum depth of field: 0 – 38 cm (probe dependent) • Continuous dynamic receive focus/continuous dynamic receive aperture • Adjustable dynamic range from 30 to 256 dB Samsung HS40 Electrical power: • Voltage: 100 – 240 VAC • Frequency: 50/60 Hz • Power Consumption – 800 VA with Peripherals Price Euro 12.000 Euro + VAT, FCA: Bucharest/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2016, condition: as good as new (ex-display), machine/vehicle number: 00069, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2016, serial number 00069, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Gbjdpfx Aohgfnbjatst Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1.900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 1987, condition: like new (used), machine/vehicle number: 2008, ID AG 11 PEINER GREIFER Producer: Salzgitter Machinen u. Anlagen AG, Salzgitter Bad/Peiner SMAG Lifting Technologies GmbH Year of manufacture: 1987, good condition, Type 6231, Product MMGL2000-4, degree of protection IP44, Voltage 380V, Frequency 50 Hz, Control block OF-519-0-4-15N, Max pressure 180 bar, Load capacity/SWL 1600 kg, deadweight 2030 kg, content 2.0 m3 Mainly used in port operations as well as in waste incineration plants, steelworks and scrap yards The gripper type is suitable for handling scrap, ingots, rubbish, biomass and woodchips, among other things The PEINER grab volume corresponds to the internal volume when the trays are closed - the actual total payload is greater Worldwide service network PEINER are designed for cranes with power supply. Depending on your individual crane equipment, the gripper can either be attached directly to slewing gears or traverses. EFFICIENCY - multi-shell design for various goods handled: Example wood chips: Maximizing the filling volume with the least possible transport loss. Equipped with the latest shell design, PEINER MMGL are ideally suited for handling wood chips. They show perfect penetration, achieve an optimal filling volume and close cleanly. PERFORMANCE - High turnover volumes per loading cycle: Gbjdshgg Eujpfx Aatet Motorized orange peel grabs adapt to the material being handled with their individually driven shells. Transport losses are minimized. Optimal construction height, low center of gravity and the robust construction offer universal application possibilities of the PEINER MMG / MMGL series. PEINER MMG / L have extremely short opening and closing times and thus optimize the number of possible loading cycles per hour. ECONOMIC EFFICIENCY - Low service costs: The maintenance points are easy to reach. In order to increase the operating times and to minimize the service effort, PEINER can be equipped with automatic central lubrication. RELIABILITY - your investment in the future: PEINER are the result of many years of experience in bulk handling, high quality components and modern manufacturing standards. Sales price 9.500 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2013, condition: excellent (used), machine/vehicle number: 2310-028, Precision Temperature Control Unit (TCU) - BOFA Year of manufacture: November 2013, serial number 2310-028, excellent condition, the filter is in good shape, electric documentation of the TCU is present, refrigerant gas: R134a 0.75Kg in the system Precision temperature control unit designed for solder paste applications Reverse flow air technology enhances filter performance and increases life Process monitoring via temperature sensors that can be strategically mounted within the printer Precision temperature control unit designed for solder paste applications. The Temperature control unit (TCU) has been designed to meet a very specific process requirement within the electronics sector. The reliable placement of surface mount devices during PCB assembly requires that during the initial printing stage the solder paste is maintained at a temperature that ensures optimum performance. With assembly now on a global basis, the variation of local climate and factory conditions means that this optimum level cannot be maintained without some form of intervention. The design of the TCU includes cooling and heating elements which ensure that the temperature within the printing environment is maintained within 1ºC of the optimum paste performance temperature regardless of whether the factory ambient is above or below this level. Reverse flow air (RFA) technology The RFA technology feature causes a fall in velocity and air direction change. Larger particulate falls out of the airstream into the filter’s drop-out chamber. With less particulate entering the filter media the filter life is significantly increased, enhancing filter capture performance and ensuring longer life. Gbedpfx Ashgg Rroatet Technical specifications 1. Chiller module 2. Condensate collection container 3. Air outlet 4. Air inlet 5. Castors 6. Service door lock 7. Fail style condensate sensor 8. Four colour beacon mounting plate Technical data: Air delivery system: Re-circulating Temperature range: +/- 8°C from ambient within a programmable range of 19 – 30°C Temperature control: +/- 1°C Cooling capacity: 2000W Temperature sensor: Shared output from integrated printer sensor (0 – 10V input over 0 –50°C) Air in filter: G4 (91% Average Arrestance) EN 779: 2002 Refrigerant gas: R134a 0.75Kg Full load current: 12.6A Start up Current: 20A Frequency: 50 / 60Hz Voltage: 230V +/- 10% (207V – 253V working range) Single Phase Noise Level: higher then 75dBA* Dimensions: 1285mm (H) + (beacon 450mm), 540mm (W), 670mm (D) Condensate: Collected in 5 litre container for disposal or piped to drain Weight: 140Kg Documentation include: Electrical Schematic Sales price: 1900 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: 2514070/0200/2007/15128743/1, Used evaporator GEA KÜBA, typ CA.E.06-1X1F, serial no. 2514070/0200/2007/15128743/1 Gbedpjip Utajfx Aatet Year of manufacture 2007 Casing Self-supporting construction, fan sections individually partitioned. Ventilator extremely silent (E)• Casing and legs from galvanized sheet steel • Temperature- and UV-radiation resistant powder coating RAL 7032 pebble gray • Lifting hangers standard Heat exchanger Standard tube arrangement lengthwise, staggered, in special copper. • Tubing: Tubes: Ripple Fin, SF-Cu Fins: High performance aluminum fins with Al studs for increased heat transfer Fin spacing: 2,2 mm. • Multi-circuiting possible. • Fluid connections Brazed copper connection vertical (can be used with vertical and horizontal airflow). 3. Axial fans Compact unit without external pressure, corrosion proof and weather resistant: Motor with fans, Fan guard in accordance with DIN 31001/24167 and assembly brackets. • Fan blades ø 650 mm, balanced in two levels according to a VDI 2060 standard. • Motors, threephase current 400±10%V, 50 Hz, 2 speeds, ∆-Y-connections, Protection: ø 650, IP66 • variable speed control by reduction of voltage. • Proof to frequency changes (maximum fan pitch dU/dt=500V/µs; Standard protection of motor by thermocouples. • For outdoor installation and ambient motor temperatures of -30°C up to +60°C. CA. 05 – 06 • 400V±10%V-3 with speed reduction ∆-Y-change-over • Protection CA.06: IP66 • Range of application: –30°C to +60°C • 230V±10%V-1 on request Maximum permissible 60 starts per hour. Fan motors have to be operated for at least two hours per month. • Other motors will change performance and Sound Pressure Levels quoted. The standard fans are recommended for frequency converters with a: • clock frequency: < 16kHz • voltage speed increase : , dU/dt < 1000V • frequency: f < 60Hz For reduction of peak voltages, speed voltage increase and motor noise (at reduced speed) manufacturers of frequency converters recommend the use of sinus filters at the output, especially when using motor cables longer than 50 m. For shorter motor cables dU/dt motor reactors can be used for this purpose. If several motors are connected, the total of all cable lengths has to be considered. Taking electromagnetic compatibility guidelines into consideration, power chokes or input filters are to be used at the input side (and shielded cables having a proper ground connection are to be used) LxBxH: 141 х 115 х 114 cm; Colant R typ Very good condition Price Euro 1200 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Year of construction: 2003, condition: excellent (used), machine/vehicle number: 2131, Brand Hermann Waldner GmbH, stainless steel mixing vessel, for perfume, shaving cream and other liquids. type: Eurocont ATW; MFG: 2003; serial number: 2131; Total dimension L 1300mm x W 1500mm x1600mm; CE Marking: YES; material: stainless steel; Capacity: 100 liters; pressure: 1 bar; type of attachment: domed; type of head: cone; type of tank: Vertical; Power: 0.55 kW; Inner diameter: 500 mm; frequency: 50/60 Hz; permissible operating temperature: 130°C; test pressure: 1.43 bar; electric connection: 400 V; vessel own weight: 100 kg; dismantled and delivered without flow meters from the picture; Sales price: 2.750 Euro + VAT, negotiable, FCA Oradea, Romania Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabila. Gbjdpfxjtgthzs Aatet We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: like new (used), Year of construction: 2025, machine/vehicle number: 3000314904, functionality: fully functional, operating hours: 5 h, power: 2.4 kW (3.26 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 300 mm, cutting width (max.): 320 mm, control type: PLC-controlled, roller diameter: 300 mm, pivoting range: 60 °, actuation type: electric, rotational speed (max.): 100 rpm, rotational speed (min.): 15 rpm, total height: 1,500 mm, total length: 2,050 mm, total width: 1,170 mm, overall weight: 650 kg, table height: 800 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, rotational speed infinitely variable, PEGAS-GONDA 300x320 SHI-LR-CZ – Demonstration Bandsaw, Year 2025 We offer for sale a PEGAS-GONDA 300x320 SHI-LR-CZ semi-automatic metal bandsaw, manufactured in 2025. The machine is offered directly by the manufacturer PEGAS-GONDA and has been used as a demonstration machine in our showroom. This is the special -CZ version, featuring a more robust saw arm design compared to the standard version. The saw arm is made from a closed-section profile, and the band wheel bearings are mounted in grey cast iron housings. This design provides increased rigidity and stability of the saw arm. In addition, the machine is equipped with a digital display showing the current cutting angle directly on the control panel, making precise angle setting easier and faster. The standard 300x320 SHI-LR, without the digital cutting-angle display, is listed in our official price list at EUR 12,020. Take advantage of this unique showroom offer at only EUR 6,100 for the demonstration machine, which also comes in the more robust -CZ version. Main Features Godezy Ndispfx Aatjbt semi-automatic hydraulic metal bandsaw robust SHI-LR-CZ design year of manufacture: 2025 demonstration machine from the manufacturer's showroom hydraulic material clamping hydraulically controlled saw arm movement continuously variable blade speed via frequency converter continuously adjustable mitre cutting from 0° to +60° right and from 0° to -45° left digital cutting angle display cast iron rotary table automatically adjustable upper saw arm position coolant system automatic indication of correct blade tension Cutting Capacities At 0° round material: Ø 300 mm rectangular section: 320 × 290 mm At +45° round material: Ø 300 mm rectangular section: 300 × 280 mm At +60° round material: Ø 200 mm rectangular section: 190 × 200 mm At -45° round material: Ø 270 mm rectangular section: 270 × 200 mm Technical Data saw blade motor power: 2.4 kW power supply: 3 × 400 V blade speed: 20–100 m/min, continuously variable saw blade dimensions: 3660 × 27 × 0.9 mm working height: 800 mm machine dimensions: approx. 2050 × 1170 × 1420–2040 mm machine weight: approx. 650 kg Semi-Automatic Working Cycle After the material is positioned and the cycle is started, the machine hydraulically clamps the workpiece. The saw arm moves rapidly towards the material and then automatically switches to the preset cutting feed. After completion of the cut, the saw arm automatically returns to the preset upper position. Between individual cuts, the operator only needs to reposition the material. The machine can be inspected and tested directly at PEGAS-GONDA, the manufacturer. Manufacturer: PEGAS-GONDA Model: 300x320 SHI-LR-CZ Year of manufacture: 2025 Condition: Demonstration machine / showroom machine

Condition: excellent (used), functionality: fully functional, Premium Sale – Altendorf F 90 Sliding Table Saw (Germany) Industrial Precision. German Engineering. Proven Reliability. For sale: Altendorf F 90 professional sliding table saw, manufactured in Germany in 1994 by Wilhelm Altendorf Maschinenbau – a globally respected name in high-precision woodworking machinery. This is a heavy-duty industrial machine, engineered for continuous operation in furniture manufacturing, carpentry workshops, and joinery plants. ⸻ ⚙ Technical Specifications: • Model: F 90 • Year of Manufacture: 1994 • Maximum Blade Diameter: 450 mm • Voltage: 400V / 3-Phase • Current: 11.5 A • Frequency: 50 Hz Gbjdoyn Ir Njpfx Aatot • Main Motor Power: 5.5 kW • Main Motor Manufacturer: EMOD • Country of Origin: Germany ⸻ ✨ Why Choose This Machine? ✔ Outstanding cutting accuracy ✔ Exceptionally robust industrial design ✔ Smooth and stable sliding table operation ✔ Powerful 5.5 kW motor for demanding tasks ✔ Optimized for high-volume production ✔ Long service life – built to withstand decades of intensive use Altendorf machines are recognized worldwide for their precision, reliability, and strong resale values. This model is a reliable investment for demanding woodworking professionals. ⸻ 🪵 Ideal Applications: • Furniture manufacturing • Cabinetmaking • Custom interior solutions • Panel processing (MDF, particleboard, plywood, solid wood, laminated panels)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input current: 78 A, The machine is in very good condition. The screen and blade diameter is U 200, and it is fully functional with a lifting arm. Year of manufacture: 2000, engine power: 40 kW. We speak English, German, and languages of the former Yugoslavia. Contact is also possible via WhatsApp. Gbsdszzdazjpfx Aatjt

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, machine/vehicle number: 87A, total width: 2,400 mm, total length: 10,500 mm, total height: 2,300 mm, cutting length (max.): 670 mm, type of input current: three-phase, overall weight: 9,000 kg, Holweg RS2 (42GL) Year 1988 Brand: Holweg Model: RS2 (42GL), modified for standard single-channel RS21 operation Year: 1988 For the production of flat-bottom paper bags, with or without gusset. Machine overhauled: new electrical components, new 3-phase main motor with frequency inverter, unwind station with new Renova Italy electronic brake system and dancer roller. Equipped with inline 4-color flexographic printer model IS 80, maximum print width 800 mm. Printing sleeves included: 4 x 220 mm, 3 x 320 mm, 1 x 370 mm, 1 x 380 mm, 4 x 400 mm, 4 x 430 mm, 4 x 440 mm, 1 x 520 mm, 3 x 520 mm, 3 x 580 mm, 6 x 660 mm, 3 x 680 mm. Gears: - 320 mm: 4 printing gears + 2 machine gears - 340 mm: 4 printing gears + 2 machine gears + 1 printer gear - 380 mm: 4 printing gears + 2 machine gears + 1 printer gear - 440 mm: 4 printing gears + 2 machine gears + 1 printer gear - 520 mm: 4 printing gears + 1 machine gear - 580 mm (290): 4 printing gears + 2 machine gears + 1 printer gear - 680 mm: 4 printing gears + 2 machine gears + 1 printer gear Forming plates: 1 x 90 mm, 1 x 120 mm, 1 x 140 mm, 1 x 150 mm, 1 x 170 mm, 1 x 180 mm, 1 x 200 mm, 1 x 240 mm, 1 x 300 mm. Note: Gluing knives for different bag widths are not included. Printer shafts/adapters: 4 printer shafts included, compatible with the printing sleeves listed above. Perforation type. Max unwinder diameter: 1,200 mm Pneumatic shaft: 70 mm Max paper width: 900 mm Gbjdpsy Iclxjfx Aatot Min–max bag width: 70–340 mm (current owner produced only one bag size: 140 mm width x 260 mm length) Cut-off length: 190–680 mm Min–max bag length: 180–670 mm Working speed: 400–800 bags/min (depending on bag size) Suitable paper: 30–70 g/m² Machine can be inspected in operation. Immediately available.

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, paper weight (max.): 208 g/m², paper width (max.): 350 mm, paper height (max.): 500 mm, production capacity: 4,500 unit/h, No minimum price – guaranteed sale to the highest bidder! Auction of a brochure production line! TECHNICAL DETAILS Gathering towers Models: Horizon VAC-100a / VAC-100m Number of towers: 2 Stations per tower: 10 Feeder system: Air suction feeder Voltage: 230 V Frequency: 50 Hz Current draw: 10.4 A per section Booklet making and folding module Model: Horizon SPF-200A Voltage: 230 V Frequency: 50/60 Hz Current draw: 3.4 / 3.2 A Booklet making heads: 2 Brochure thickness: up to 4.5 mm Functions: Wire stitching and center folding Front trimmer Model: Horizon FC-200A Function: Automatic front trimming Operating mode: Inline operation with Horizon SPF-200A Cutting quality: High-precision cut Stacking unit Model: Horizon ST-40 Voltage: 230 V Frequency: 50 Hz Current draw: 4.7 A Function: Automatic stacking of finished brochures Production capacity: max. 4,500 brochures/h Feeder stations: 10, expandable to max. 60 Sheet format max.: approx. 350 × 500 mm Paper weight: 52–208 g/m² Booklet thickness: max. 2 mm for saddle stitching Processing: Gathering, stitching, folding, and stacking in one system MACHINE DETAILS Production counter: approx. 1,800,000 brochures Gbedpfezy Hhxex Aatst EQUIPMENT Horizon VAC-100a gathering tower Horizon VAC-100m gathering tower Horizon SPF-200A booklet making and folding module Horizon FC-200A front trimmer Horizon ST-40 stacking unit Data sheets for the individual components of the system, including further detailed technical data, can be found in the appendix.

Condition: used, Year of construction: 2002, Second-hand machine Year of manufacture: 2002 Features and technical specifications: - Control display on the upper control panel - Control panel can be swivelled and extended - Swivelling milling spindle - Swivel range of the milling spindle: +/- 45° - Milling spindle stroke: 150 mm - HSK80 quick-change milling spindle system - Milling arbor 30 mm - Electromechanical spindle locking mechanism - Frame support 1,340 mm at the machine table, extendable by approx. 700 mm - Table extension on the right - Table extension on the left - 2-axis positioning control for height and swivel adjustment, digital LED displays - Voltage 400 V / 50 Hz - Power socket - Automatic motor start via contactor control - 7.5 kW main motor, frequency-controlled / continuously variable speed control - Milling stop type 203 with handwheel adjustment on both sides - Centrex Type 1624 milling protection and clamping device - ZEROMASTER reference dimension setting device - Wegoma Variomatic 4N feed unit: 4-roller feed unit Variable feed speed 2–18 m/min Clockwise and anti-clockwise rotation Suitable for both horizontal and vertical use Memo-Lock system for easy swivelling and repositioning Digital height display Height adjustment from the operator’s side Generously sized locking levers Maximum reach 1,050 mm thanks to extended tube - Dimensions: 260 x 180 x 130 cm - Weight: approx. 1,100 kg Godjzk N Sbjpfx Aatobt Availability: at short notice Location: 63934 Röllbach

Condition: used, Year of construction: 2016, Used capsuling machine Robino & Galandrino for champagne bottles up to 000 bph The machine Robino & Galandrino ZENITH for champagne bottles up to 000 bph delivers high-precision capsuling for specific applications in the bottling sector of sparkling wines and champagne. Moreover, Robino & Galandrino manufactured the ZENITH Z 3-36 OTTICO model in 2016, incorporating advanced technology to achieve optimal capsuling results. Technical Specifications of the Capsuling machine Robino & Galandrino ZENITH Production speed: This capsuling machine processes up to ,000 bottles per hour (bph) with single capsule centering. Additionally, it reduces the speed to 9,000 bph in double centering mode, which aligns both the bottle and the capsule optically. Containers: This machine specifically accommodates glass bottles, thereby fulfilling the requirements of champagne and sparkling wine producers. Capsuling heads: The machine features application heads, which distribute capsules uniformly and precisely, even at high speeds. Capsule type: The system supports capsules for champagne and sparkling wines, thus ensuring a perfect fit on the bottle neck. Distinctive Features Optical centering system: The advanced optical centering system delivers millimetric precision during capsule application. Consequently, this capability is particularly critical for achieving high aesthetic and functional standards. Counterclockwise rotation: The machine rotates counterclockwise, which enables seamless integration with pre-existing production lines. Extended capsule stock: The extended stock capacity significantly increases operational autonomy and minimizes downtime for capsule loading. Optimized production: The ZENITH Z 3-36 OTTICO model maximizes productivity while maintaining consistent quality through its flexible configuration for various operating modes. Safety and Electrical Supply Gbjdpfx Aasvu A Etjtot This machine adheres to strict safety standards, thereby creating a safe working environment for operators. Furthermore, it operates with a 400 V power supply, 50 Hz frequency, and 18 A current draw, ensuring stable performance and compatibility with standard industrial installations. Current Condition of the Capsuling machine Robino & Galandrino ZENITH The machine remains in storage. Its modular design, as a result, simplifies adaptation to different operational needs. Ideal Applications This Capsuling machine Robino & Galandrino ZENITH suits producers who require high production volumes and flawless capsuling quality. Moreover, its versatility allows usage in both new production lines and existing plants, ensuring compatibility and superior performance. Choosing the Used capsuling machine Robino & Galandrino for champagne bottles up to 000 bph guarantees access to a reliable, high-performance machine equipped with advanced optical centering technology. Thus, it represents an essential asset for high-demand production environments.

Condition: used, Year of construction: 2013, Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour The Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  1650 Bundles/Hour is a machine designed for shrink film packaging, ensuring high performance and reliability. Consequently, this model, manufactured in 2013, operates at a speed of 1650 bundles per hour, making it suitable for high-efficiency production environments. Godpfov Ew Rlox Aatjbt Technical Features of the Used Shrink Wrapper ITAL PAL FNC70+ PC300T1 1650 Bundles/Hour First of all, the machine features a straight entry configuration, allowing a linear handling of containers before film wrapping. Additionally, it works with neutral film, but it also supports printed films, enabling packaging customization according to production requirements. Moreover, the system includes a tray, which is essential for product stability during the packaging process. It processes formats ranging from 3 to 24 pieces per carton, with an adjustable configuration based on container volume. Similarly, the machine operates with American boxes, a widely used packaging type in the industry to ensure product protection and durability. Electrical Specifications and Energy Consumption Furthermore, the system operates with a voltage of 380V, a power consumption of 10 kW, and a frequency of 50 Hz, meeting industrial standards for this type of machinery. Given these specifications, the shrink wrapper dimensions are 3400 mm in length and 2400 mm in depth, making it compatible with many existing production lines. Container Compatibility In particular, the Used Shrink Wrapper ITAL PAL FCN70 + PK300T1  processes various types of containers, primarily focusing on glass bottles and cans, offering operational flexibility for different industrial sectors, including the beverage and food industries. As a result, manufacturers benefit from a machine that efficiently handles diverse packaging needs. Operational Status and Maintenance Notably, the machine is currently in production, ensuring full operational functionality and proper performance of all its components. Additionally, both technical manuals and safety protections are available, complying with industrial safety regulations. In addition to these features, the shrink wrapper has undergone periodic revisions, maintaining consistent performance and minimizing the risk of machine downtime. Furthermore, spare parts are available, facilitating routine and extraordinary maintenance without affecting productivity. Conclusion of this Used Shrink Wrapper ITAL PAL To sum up, the used ITAL PAL FCN70 + PK300T1 shrink wrapper is an optimal solution for those seeking a reliable machine with high production capacity. Consequently, its versatile configuration, compatibility with different packaging formats, and guaranteed maintenance make it ideal for automated packaging lines. Given its efficiency, the 1650 bundles per hour speed, combined with compatibility with neutral and printed films, makes it a strategic choice for optimizing industrial packaging processes. Therefore, this machine is an excellent investment for businesses aiming to enhance their packaging efficiency.