Used Friction Welding Lathe for sale (11,159)

Condition: used, Year of construction: 1990, turning length: 440 mm, turning diameter: 440 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 45 rpm, total height: 1,800 mm, overall weight: 4,300 kg, bar passage: 51 mm, bar diameter (max.): 51 mm, controller manufacturer: MAZATROL, controller model: T32-2, number of spindles: 1, space requirement length: 2,500 mm, space requirement width: 2,600 mm, CONTROLS .. CNC controls MAZATROL T32-2 BASIC FUNCTIONS .. number of spindles: 1 .. number of turrets: 1 .. live positions: no WORKING RANGE TURNING .. swing diameter (max): 440 mm .. turning diameter (max): 225 mm .. bar diameter (max): 51 mm .. worpiece length max.: 440 mm MAIN SPINDLE .. spindle revolutions (min): 45 /min .. spindle revolutions (max): 4500 /min .. spindle diameter: 61 mm X/Z SLIDE .. rapid traverse Z: 30000 mm/min .. rapid traverse X: 30000 mm/min .. tool fixture: Turret Gkjdpfx Aaexm Rtxebjc .. number of tool positions (total): 12 X SLIDE .. X-axis travel: 220 mm ELECTRICAL SPECIFICATIONS .. mains voltage: 400 V .. mains frequency: 50 Hz DIMENSIONS / WEIGHTS .. space requirements -left/right-: 2500 mm .. space requirements -front/back-: 2600 mm .. total height: 1800 mm .. total weight approx.: 4300 kg ATTACHMENTS (TURNING) .. tailstock: yes .. chip conveyor: no .. coolant unit: yes

Condition: like new (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 002A0100, total height: 2,200 mm, total length: 12,000 mm, total width: 2,500 mm, overall weight: 8,000 kg, Equipment: documentation/manual, TECHNICAL DATA & EQUIPMENT: Operating voltage: 400 V Frequency: 50 Hz Rated current: 64 A Rated power: 43 kW Includes chip conveyor from KNOLL, a coolant system, as well as a bar feeder Manufacturer: FMB Type: TURBO 5-65 Year of manufacture: 2025 Also includes a pallet with various accessories such as driven tool holders, HAINBUCH collets, and documentation Gkodpfjxm Sfcjx Aaboc SPECIAL NOTICE: The machine was purchased for a training workshop and has never been used. Therefore, it has approximately zero operating hours PICK-UP INSTRUCTIONS: Collection must take place definitively between December 10th and 12th FCA Winterlingen, loaded onto truck

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Vertical Turning Lathe – WEBSTER & BENNETT R48R 2PB C-axis, driven tools Condition: Used Year of manufacture: 2006 CNC: Siemens 840D Powerline Technical Specifications Faceplate diameter: 1,200 mm Turning diameter: 1,200 mm Gkedexl E R Nopfx Aabsc Number of slides (ram): 1 Ram stroke: 1,200 mm Ram cross-section: 200 × 200 mm Max. workpiece height under crossbeam: 1,200 mm X-axis travel: 1,200 mm C-axis: available (C-Axis) Drives / Speeds Main spindle motor: 37 kW Main spindle speed: 0.2 – 430 rpm Milling spindle motor: 17 kW Milling spindle speed: 20 – 3,000 rpm Tool changer Turning: 50 positions, Capto C6, robot handling Milling: 10 positions, ISO 50, robot handling Other features Magazine and stations for turret/tool holders Machine weight: approx. 18 t Scope of delivery as described above only. Further options/accessories only as per written agreement.

Condition: excellent (used), Year of construction: 1991, functionality: fully functional, Copy stroke max. 250 mm; Copy diameter max. 260 mm; Spindle speed min. 400 rpm; Spindle speed max. 3,200 rpm; Speed settings 8; Main motor 1.4 kW; Many accessories; You can call or write to us. We speak and write German and Russian. You can also send us messages in English. Godpfxev Nxdno Aabekc

Condition: good (used), Year of construction: 2005, Control: FANUC Series Oi-TC Max. turning diameter: 310 mm Max. part length: 520 mm Max. bar diameter: 65 mm Gkodpoww H T Eofx Aabec Travel: X = 210, Y = 610 mm Turret with 12 stations All driven tools Spindle speed range: 60–4,200 rpm Without tailstock Chip conveyor EMCO bar feeder

Condition: used, continuous power (apparent): 50 kVA, short-circuit current: 31 A, input voltage: 380 V, overall weight: 420 kg, welding power (max.): 126 kVA, Dear Sir or Madam, Below we offer you a DALEX spot welding machine "PMS 10-4", used and in very good condition. Technical data and dimensions: errors excepted. Prices are quoted: plus VAT ex stock, loaded free truck. Delivery time: immediately available from stock, subject to prior sale. Gkodpewtr Exsfx Aaboc Payment: advance payment. For further details, see PDF.

Condition: ready for operation (used), functionality: fully functional, turning diameter over cross slide: 620 mm, spindle bore: 160 mm, turning diameter: 1,600 mm, turning diameter over bed slide: 900 mm, center height: 450 mm, turning length: 2,500 mm, total length: 4,000 mm, total width: 1,250 mm, total height: 1,600 mm, spindle speed (max.): 700 rpm, spindle speed (min.): 9 rpm, Parallel lathe with movable bed Tacchi model FTA 40 featuring: - Center height: 450 mm - Distance between centers with bed closed: 1500 mm - Distance between centers with bed open: 2500 mm - Useful bar passage: 160 mm - Rotating tailstock - Position readouts - Motorized longitudinal bed movement Godpjxl R U Hefx Aabjkc - Standard accessories Free deferred payment over 12/24 months.

Condition: good (used), Year of construction: 1984, Ref. -No.: 10594 Manufacturer: DECKEL GILDEMEISTER Type: MD 3S Year of construction: 1984 Type of control: CNC Control: ELTRO MPULS Storage location: Halberstadt Godsxmfamopfx Aabekc Country of origin: Germany Turning Diameter: 400 mm Turning Length: 600 mm Swing Diameter: 600 mm Spindle Bore: 73 mm

Condition: good (used), Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table -Welding turning device: turning length 3130 mm -Turntable: Ø 800 mm Gksdpfjxm Sqrjx Aabjc -Drive: Servo Motor 1/1.6 kW with cooling, see photo nameplate -Rotation direction: right/left rotation -Transport dimensions: 3890/900/H1420 mm -Weight: 880 kg

Condition: excellent (used), CATALOGUE NUMBER 7753 TECHNICAL DATA - max diameter of processed dowels: 130mm - installed bushing: 110mm - max input material diameter: 160mm - min input material length: 800mm - max machining allowance per side: 15mm - knife head drive motor: 15kW - 3 feed speeds + forward/reverse - feed motor: 1.1kW In sequence: - 3 toothed feed rollers - 3-knife head - 3 smooth outlet feed rollers - dimensions (L/W/H): 3100x1400x1500mm - weight: 2100kg ADVANTAGES - manufactured in Poland - 3-knife head - used dowel lathe, very good condition Net price: PLN 36,900 Net price: EUR 8,680 (according to the rate of 4.25 EUR) (Prices may vary depending on exchange rate fluctuations) Gsdpjxhddgefx Aabekc

Condition: excellent (used), Year of construction: 2018, operating hours: 2,651 h, functionality: fully functional, Rotatable diameter as Swiss-type lathe: 38 mm Rotatable diameter as conventional lathe: 42 mm Guide system: JBS double cone Parts catcher included: for both short and long parts Turning length in a single pass: approx. 320 mm (simultaneous finish and roughing) Simultaneous machining: front and rear sides Gjdpfxoxnbc Hs Aabjkc Control: Fanuc Series 31i-Model B In-process measurement: Blum probe Bar feeder: FMB LSK38, max. bar length extended to 3300 mm Oil mist extractor: UC1SD High-pressure system: available, 100 bar Lubricant: coolant Various accessories: guide channels, guide tubes, various tools, various double cone bushings

Condition: good (used), Year of construction: 1995, turning diameter over bed slide: 810 mm, swing diameter over cross slide: 510 mm, quill stroke: 225 mm, quill diameter: 115 mm, center height: 400 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 1,800 rpm, bed width: 480 mm, overall weight: 6,400 kg, torque: 3,150 Nm, We are offering you a lathe from the brand "VOEST ALPINE" (WEILER), model E80/3. Gksdpfx Aew Tq Tyoabjc For further details, please refer to the attached PDF. The extensive range of accessories is also listed there. Best regards, Wiegand Co.

Condition: used, Year of construction: 1979, Year 1979 Retrofit 2013 Gkedpfxjxmk E Uj Aabec max. turning diameter 1300 mm table diameter 1000 mm workpiece height max. 1500 mm working lenght 1050 mm 280 U/min. T-slots 48 x 28 speeds 4,75 - 250 U/min rapid traverse 6000 mm/min In our opinion, the machine is in good used condition and can be inspected condition and can be inspected under power by appointment. Retrofit 2013 Precision class: IT7 Technical features - 4-fold swivel head Accessories, illustrated tools and clamping devices are only included in the scope of delivery if this is noted in the additional information . Changes and errors in the technical data and information as well as prior sale reserved. subject to prior sale

Condition: good (used), Year of construction: 1990, Ref. -No.: 10590 Manufacturer: EST TICINO Type: 520 x 1500 Year of construction: 1990 Type of control: Konventionell Storage location: Halberstadt Country of origin: Italy Machine-No.: 0012XXXX Chuck diameter: 4 x Ø 1700 mm Gedpfx Aajxmfagebskc Turning Length: 1500 mm Turning Diameter Over Bed: 1040 mm Spindle Speeds: 600 RPM Centre Distance: 1500 mm Spindle Bore: 160 mm Spindle power: 35 kW Turning diameter over cross slide: 710 mm Machine length: 5000 mm Machine width: 2350 mm Machine Height: 2100 mm Weight Of The Machine Ca.: 8,5 t Max. swing diameter: 1880 mm Further information: - Made of cast iron - Hardened and ground guideways The machine can be viewed under power by appointment.

Condition: excellent (used), Container turning device, welding turning device, welding turning device, welding device, welding turntable, welding turntable and tilting table, welding turning device, welding turntable tilting table Gsdjw Nyguepfx Aabekc -Welding rotating device: pivoting with forming gas line in the center, foot switch -Control: Ess Type PS3E -Turntable: Ø 450 mm -Holder: four-jaw chuck Ø 400 mm -Spindle bore: Ø 62 mm -Dimensions: 780/600/H910 mm -Weight: 190 kg

Condition: good (used), spindle bore: 66 mm, turning diameter over bed slide: 570 mm, swing diameter over cross slide: 340 mm, quill stroke: 160 mm, quill diameter: 70 mm, center height: 280 mm, spindle speed (min.): 1 rpm, spindle speed (max.): 2,500 rpm, total length: 2,850 mm, total width: 1,820 mm, total height: 1,750 mm, overall weight: 2,750 kg, torque: 1,600 Nm, We offer here a lathe from the brand "WEILER", model E50x1000. Please refer to the attached PDF for details. The extensive accessories are also listed there. Kind regards, Gsdpfew Trbfsx Aabjkc Wiegand Company

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Gkedjxmd U Ajpfx Aabsc Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Year of construction: 1980, condition: good (used), A used very well preserved cycle controlled lathe from Weisser Heilbronn with SIEMENS control. centre distance 2000 mm centre height 295 mm Gsdpfx Aaegyy I Aebokc Swing over bed 600 mm Swing over cross slide 260 mm Swing diameter in the bend 800 mm Total length of the crank 375 mm Bed width 450 mm Plan travel X-axis 350 mm Longitudinal travel Z-axis 1850 mm Spindle nose DIN 55022 size 8 Spindle speed Number 18 14 - 1400 rpm spindle bore 71,5 mm Diameter of front bearing 110 mm feed range 0,01 - 40,95 mm/rev rapid traverse 8 m/min Direct current drive 15 kW 400V 50Hz Max. permissible torque at the spindle 2500 Nm Tailstock quill 80 mm quill stroke 250 mm inner taper quill MK 5 Length x width x height Weight of the machine 5500 kg Accessories Tailstock Pneumatic three-jaw chuck with interchangeable jaws 315mm Quick change holder "MULTIFIX "in front of the center size "C Quadruple turret behind the center Tool holder Coolant device Pneumatic steady rest Technical data and dimensions: Errors excepted. Videoconference via whatsapp possible by appointment

Condition: good (used), Year of construction: 1970, Ref. -No.: 10575 Manufacturer: VDF BOEHRINGER Type: T 11 Year of construction: 1970 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Gedpfxexmd Uvj Aabskc Machine-No.: 40XXX Turning Diameter: Ø 700 mm Turning Length: 3000 mm Spindle Diameter: Ø 750 mm Spindle Bore: 70 mm Swing diameter over cross slide: Ø 450 mm

Year of construction: 1989, condition: used, A used CNC- lathe in good condition with NUM- CNC control Chip conveyor, coolant unit, hydraulic power chuck, jaws and tool holders turning diameter over bed 360mm Turning diameter over support 260mm Max. turning length 625mm Gkjdjflhcmepfx Aabec Spindle speed 3500 rpm spindle passage 42mm Tech. Data and dimensions: Errors excepted. Further tech. data see pdf.- document

Condition: good (used), Year of construction: 1957, Ref. -No.: 10573 Manufacturer: VDF Type: W 40 Year of construction: 1957 Type of control: Konventionell Storage location: Halberstadt Country of origin: Germany Machine-No.: 030XXXX Turning Diameter: Ø 960 mm Turning Length: 4500 mm Spindle Speeds: Ø 105 RPM Turning diameter over cross slide: Ø 600 mm Gedpsxmd Upsfx Aabokc

Condition: good (used), Year of construction: 2008, Ref. -No.: 10474 Manufacturer: SPINNER Type: TC77 MCY Year of construction: 2008 Gedpfxjxmd Tfo Aabjkc Type of control: CNC Control: Siemens 840 D Storage location: Halberstadt Country of origin: Germany Machine-No.: AP0XXXXX Chuck diameter: 210 mm Tailstock - diameter: 110 mm Feed speed X / Z: 15/24 mm / min Turning Diameter: 500 mm Max. Torque: 113 Nm Travel -X Axis: 350 mm Travel -Y Axis: 230mm (-110mm +120mm) mm Travel -Z Axis: 1160/1840mm mm Distance Between Centres: 800 / 1500 mm Spindle 1 spindle head diameter (flange): A8 mm Spindle 2 spindle head diameter (flange): A6 mm Quills Morse taper: MK4 Turret places: 12 Pcs Machine length: 3250 mm Machine width: 1980 mm Machine Height: 2090 mm Weight Of The Machine Ca.: 7,5 t Max. swing diameter: 690 mm Further information: Spindle head: A8 Bar capacity: 77mm Bar capacity: 52mm Number of rotating tool positions: 12 Y axis + C axis. Machine can be inspected under power by arrangement.

Condition: new, Year of construction: 2025, Ref. -No.: 10461 Manufacturer: IGREK Type: DT 4000 Year of construction: 2025 Type of control: CNC Control: SIEMENS SINUMERIK 840D SL Storage location: Istanbul Country of origin: Türkiye Spindle Speeds: 4000 RPM Turning Height: 2000 mm Table Diameter: 4000 mm Spindle power: 37 kW Max. Table load: 40 t Rotate table rotation speed: 60 RPM Max. Turning diameter: 5000 mm Max. Turning height over faceplate: 2000 mm Max Spindle Torque: 1200 Nm Spindle Taper: ISO 50 Machine length: 7500 mm Machine width: 12000 mm Machine Height: 9500 mm Weight Of The Machine Ca.: 125 t Further information: Ram Slide Stroke: 2100 mm Ram Section: 350 x 350 mm Vertical Travel of the Moving Traverse: 2000 mm Table Drive System: Segmented Direct Drive Motors Table Torque: 8200 Nm - 14400 Nm max. Table Guide System: Hydrostatic Bearing and Guides Gedpfx Aasxmd Suebskc IGREK DT 4000 – Your solution for precise heavy-duty machining The IGREK DT 4000 is a state-of-the-art CNC vertical turning center designed specifically for the precise machining of large components. Equipped with a 4,000 mm hydrostatic rotary table and a movable crossbeam, it enables the efficient machining of workpieces with a maximum turning diameter of 5,000 mm and a turning height of up to 2,000 mm. Key features: Hydrostatic rotary table: The 4,000 mm rotary table with hydrostatic bearing ensures maximum precision and smooth running when machining heavy workpieces. Movable crossbeam: The vertically movable crossbeam with a stroke of 2,000 mm offers flexibility and allows adaptation to different workpiece heights. Powerful spindle: With a spindle speed of up to 4,000 rpm and a power of 37 kW, the machine is designed for demanding machining tasks. High load capacity: The rotary table can accommodate workpieces weighing up to 40 tons, enabling the machining of large and heavy components. Multifunctional machining: Thanks to the live spindle and the precise positioning of the C-axis, milling and drilling operations are possible in addition to turning, which increases the versatility of the machine. The IGREK DT 4000 combines advanced technology with high performance and flexibility to meet the requirements of modern manufacturing processes. Its robust construction and wide range of machining options make it the ideal solution for the precise machining of large components in various industries.

Condition: good (used), Year of construction: 2015, Ref. -No.: 10421 Gkedpfxexmd Sbs Aaboc Manufacturer: SCHüTTE Type: SF 26 Year of construction: 2015 Storage location: Halberstadt Country of origin: Germany Serial no.: 3 Power consumption: 35 kW Weight Of The Machine Ca.: 6,6 t

Condition: good (used), Year of construction: 2005, Ref. -No.: 10314 Manufacturer: PINACHO Gkjdpoxmd R Dsfx Aabec Type: S-90/ 310-155 Year of construction: 2005 Type of control: Konventionell Storage location: Halberstadt Country of origin: Spain Bar passage: 90 mm Travel quill: 180 mm Turning Diameter: 630 mm Turning Length: 3000 mm Turning Diameter Over Bed: 620 mm Tip length: 3000 Cross Movement. (X-Axis): 365 mm Spindle Bore: 155 mm Tailstock Quill Diameter: 72 mm Turning diameter over cross slide: 880 mm Jaw chuck diameter: 380 mm Turning Speed Range: 16 - 750 rpm Further information: - The lathe has two jaw chucks on the headstock - metric, Whitworth and inch trapezoidal threads can be turned - adjustable feeds for cross face and longitudinal face turning (0.05 to 1.5 mm/u)