Used Friction Welding Lathe for sale (10,944)

Condition: ready for operation (used), Year of construction: 2000, overall weight: 12,500 kg, Vertical, heavy-duty CNC turning machine with Fanuc control; 630 power chuck; 850 mm turning diameter; no driven tools; good condition; chip conveyor; various tool holders; machine manuals and documentation; Bwjdpfxe Aggdhj Alfew without coolant tank and pumps – can be retrofitted if required; ideal for dry machining.

Condition: new, Year of construction: 2026, functionality: fully functional, total height: 2,760 mm, total width: 2,450 mm, total length: 3,600 mm, overall weight: 3,200 kg, input voltage: 400 V, input current: 40 A, warranty duration: 12 months, Equipment: documentation/manual, This offer features a robotic welding cell, which includes a Panasonic TM-1800 welding robot with a WG4 controller, along with two workstations equipped with single-axis welding positioners. The workstations, measuring 1200x800 mm, are positioned opposite the robot, with the fixtures located 800 mm above the floor. The entire cell is mounted on a common structural base, allowing it to be easily relocated anywhere within the production facility using a forklift. Safety is managed by a system incorporating limit switches installed on a sliding partition and service access doors. If a limit switch is triggered on the side where the robot is currently operating, both the robot and the positioner will come to an immediate stop. Bwsdpfx Alo Agng Dofsw A fume extraction hood with ductwork will be installed above the cell to capture welding fumes generated during the robot's operation. A filtration unit, featuring an automatic filter-cartridge cleaning system, will be positioned next to the cell. The cell is equipped with a Panasonic TAWERS welding system, which integrates a 350A MIG/MAG inverter power source directly with the robot controller. The robot is outfitted with a wire feeder, a welding cable package, a gas-cooled welding torch, and an anti-collision sensor.

Condition: excellent (used), operating hours: 8,640 h, Maximum height 260 mm Turning length 600 mm Maximum turning diameter over the bed cover 400 mm Maximum turning diameter over the compound slide 225 mm Cross travel 260 mm Longitudinal travel 660 mm Spindle head DIN Size 140 h5 Spindle bore 68 mm Speed range 25 – 4000 rpm Feed range, longitudinal and cross 0.5 – 5000 mm/min Rapid traverse, longitudinal and cross 9 m/min Taper in spindle MK 4 Tailstock quill stroke 100 mm Main drive 22 kW Dimensions L x W x H approx. 3600 x 1720 x 1650 mm Weight 3200 kg Accessories / Special features: • CNC control GILDEMEISTER EPL 2 • Electronic handwheel • RS 232 interface • Manual 3-jaw chuck, diameter 200 mm • 12-station tool turret, manufacturer SAUTER, internal coolant supply, VDI 30, tool holder bore Ø 30 mm, DIN 69880 • Swiveling chip conveyor with coolant system Bodoz Icuzspfx Alfsww • Electric foot switch for hydraulic 3-jaw chuck and hydraulic tailstock quill • Various tool holders • Lighting Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), Year of construction: 2011, workpiece weight (max.): 20 kg, turning diameter: 250 mm, torque: 256 Nm, power: 45 kW (61.18 HP), CNC vertical turning lathe Manufacturer: EMAG Type: VTC 250 Year of manufacture: 2011 / 2012 Control: Siemens 840D sl Technical data: Max. turning diameter: 250 mm Bsdj Agr Dyspfx Alfjww Max. turning length: 630 / 730 mm Max. swing diameter: 140 / 260 mm Main spindle: Max. speed: 3,500 / 4,000 rpm Max. torque: 256 Nm Spindle bore: 50 / 52 mm Chuck diameter: 250 mm Tool turret: Number of turrets: 2 Max. tool weight: 10 kg Max. tool length: 90 mm Max. workpiece weight: 20 kg Feeds: Rapid traverse (x / z): 40 / 30 m/min Total power requirement: 45 kW Machine weight: approx. 14 / 16 tons There are 2 units manufactured in 2011 and 1 unit manufactured in 2012 available. Technical features & accessories: - Year of manufacture 2011: Number of bed and cross slides: 2 - Year of manufacture 2012: Number of bed and cross slides: 1 - Tool monitoring - Protective guard - Collision monitoring - In-process quality control - Central coolant supply (not included) - Chip conveyor Price per machine. Accessories, tools and clamping devices shown in the pictures are only included in the scope of delivery if this is noted in the additional information.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, turning diameter over cross slide: 480 mm, spindle bore: 103 mm, turning length: 2,000 mm, turning diameter: 520 mm, turning diameter over bed slide: 520 mm, three-jaw chuck diameter: 400 mm, spindle diameter: 110 mm, workpiece length between centers: 2,000 mm, CNC: Siemens Sinumerik 840 D Swing over bed: 520 mm Permissible swing over carriage: 480 mm 12-position turret Speed range: 7-2800 rpm Distance spindle nose to faceplate: 2171 mm Maximum turning diameter: 520 mm Maximum turning length: 2000 mm X axis: 405 mm Z axis: 2049 mm Spindle speed: 7-3000 rpm Spindle bore: 103 mm Spindle nose: A11 Bedpfjyxv D Nex Alfoww No tailstock.

Year of construction: 1980, condition: used, Equipment: tailstock with handwheel, compound slide, cross slide, longitudinal carriage with apron, machine light, integrated machine stand, tool holder. Inspection possible by appointment. Bjdpfx Alj Afza Rjfjww

Year of construction: 2017, condition: used, 6x Cloos Qineo Tronic 450 MIG/MAG welding machines, 1x Cloos GLC 451-C welding machine and 1x Cloos GLC 553/MC3 welding machine are available, 1) 6x Cloos Qineo Tronic 450 MIG/MAG welding machines, welding current: 40-450A, welding current at 60% duty cycle: 450A/36.5V, welding current at 100% duty cycle: 350A/31.5V, open-circuit voltage: 77-98V, mains voltage: 380-480V/50Hz/3-phase, power cable: 4x6mm², mains fuse protection: 400V/32A, protection rating: IP23, insulation class: F, cooling method: F, dimensions (without wire feeder): 1011x517x703mm, weight (without wire feeder): 88kg, year of manufacture: 5x2017, 1x2016, 2) 1x Cloos GLC 451-C welding machine, year of manufacture: 2003, 3) 1x Cloos GLC 553/MC3 welding machine, year of manufacture: 2008, additionally, 21 welding torches with long torch necks, 12x500mm, 4x600mm, 5x1500mm, and 53 FKS400 Autogen Ritter welding torch hose assemblies are included, an on-site inspection is possible. Bodpfx Alj Afzadjfsww

Condition: used, Micro-welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO, Type ISQ20 Compact ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO, Type ISQ-MG - Spot welding head MIYACHI PECO, Type F160S - 25 mm stroke with Heidenhain measuring system - Connection cable Mains voltage: 3 x 400 V AC Mains frequency: 50 / 60 Hz Connected power: 22 kVA Welding current types: AC / DC Output power: max. 10 kA Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external ring coil Control panel: MFT1 (independent, detachable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Fault monitoring and process monitoring - Monitoring of current, voltage, power, energy - Test pulse for part detection - Program memory for 99 programs Inverter dimensions W x H x D: 216 x 420 x 560 mm Inverter weight: approx. 21 kg Bsdpfxopy Uzys Alfjww Spot welding head MIYACHI PECO F160S Rated power: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force activation from 1.2 to 550 N - Position measuring system Heidenhain Welding unit with 5 pneumatic cylinders and Festo Type CPX valve manifold Welding head mounted on a horizontal guide rail and movable by 20 mm via a pneumatic cylinder. 3 pneumatic cylinders for workpiece fixing are available (2 with 46 mm stroke, 1 with 20 mm stroke). Welding tip overhang 300 mm Welding tip height above floor 315 mm Dimensions of welding unit W x H x D 410 x 760 x 700 mm Weight of welding unit 75 kg Total weight 100 kg

Condition: good (used), Year of construction: 2008, Description: Takisawa Manufacturer: Takisawa Type: EX-310 Turning length approx. 500 mm. Rotation diameter: approx. 260 mm. Bsdpfx Aotrd Srolfeww Equipment: Control: Fanuc 21i-TB Bar loader for bar length 1.5 m Tailstock Turret with 12 tool stations and driven tools. Three-jaw chuck Ø 250 mm.

Condition: used, Year of construction: 2013, Technical details: weight of the machine approx.: 300 kg electrics - voltage/frequency: 400 / 50 bei 3~ V/Hz Bwsdpfx Alsu Nv Afefew power consumption: 750 Watt dimensions L x W x H: 1,5 x 0,8 x 2,6 m Mobile compact filter unit with extraction arm. (Welding fume extraction and fume filtration). Range of application: MIG/MAG solid wire; various fume and dust applications. incl. extraction nozzle manufacturer Lincoln, type LFA 4.1 CPL BJ 2013; tube Ø 200mm; suction Ø 280mm; total length=3900mm; the head is equipped with illumination via light switch, manual rotary head for locking flap, on/off switch gas temperature 40°C / 100°F Suction capacity approx. 2000m³ mobile over 4 wheels, front braked *

Condition: used, Year of construction: 1990, Technical details: Bodpfxsu Nv Dpj Alfsww total power requirement: 1,5 kw weight of the machine approx.: 110 kg electrics - voltage/frequency: 380 / 50Hz V/Hz dimensions L x W x H: 1,0 x 0,55 x 2,4 m Application: for welding and dust air with filtration Air inlet: pipe connection Ø 150 x 60mm; intake flexible pipe 2-sectioned Exhaust air: flexible hose Ø 150mm to approx. 5 meters Operation via on/off switch *

Condition: used, Technical details: power consumption: 20 - 300 A welding current: U1 = 380 V connected load: 14 kVA weight of the machine approx.: 171 kg dimensions of machine: 0,9, x 0,5 x 0,92 m Transformer - Welding machine - Welding transformer Control: 14 levels for thin sheet metal and 14 levels for thick sheet metal air-cooled Protection class P 21 Bodpfxou Nwgre Alfjww with electric welding gun with cable approx. 6.0 meters Ground clamp and earth cable approx. 4.0 meters *

Condition: used, Technical details: number of spindles: 15 Stück number of stations: 8 Stück control: PS 2000 weight of the machine ca.: 17,0 t total power requirement: 83,0 kW dimensions of machine: LxBxH: 2400x2800x2800 mm dimensions electric cabinet: Nr.1:LxBxH: 1000x850x2350 mm dimensions electric cabinet: Nr.2: LxBxH: 1250x650x2230 mm dimensions electric cabinet: Nr.3: LxBxH: 650x600x1700 mm dimensions electric cabinet: Nr.4: LxB.H: 1000x500x1350 mm space requirements approx. LxWxH: 5,0 x 6,2 x 3,8 m TRANSFER MACHINE with 3 work station and 15 drill & mill spindles for example the production of a high quantity of armatures Other technical information about the machine: - workpiece carrier: workpiece holding barrel Ø 800mm for 8 work piece - clamping station, cycle time of 10 sec. - drilling and milling unit: SK 40 intake; spindle stroke 125 mm; standard feed rate 1m/min; rapid traverse feed rate 4m/min; RPM max. 2240 rpm - right 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - left 3x drill-& mill spindle, 1x thread cutting spindle, 1x U-axis such as radial 2x drill-& mill spindle slideable, 1x thread cutting spindle slideable and 2x U-axis slideable - 1.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 125mm; RPM 35.5 - 900 rpm; right/left - 2.Thread-cutting unit: SK 40 Intake; Quill Ø 125 mm; quill-stroke 80mm; RPM 45 - 560 rpm; right/left Equipment: - 2 hydraulic aggregate - chip conveyor Bedeu Idxfepfx Alfoww - belt filter produced by Filtertechnik Gera (fleece band 430mm) - control panel - manual switch i.D. *

Condition: used, Year of construction: 2013, Crankshaft Lathe Manufacturer: NILES-SIMMONS Type: N20/2 Year of manufacture: 2013 Technical data: - Feed rate (X/Z): 20 / 40 m/min - Rapid traverse (X/Z): 18,000 / 30,000 mm/min - Number of tool stations: 12 positions - Tool holder: VDI 50 Bodpfx Alex Ik Tdjfoww In our assessment, the machine is in good used condition and can be inspected under power by appointment. There are 2 machines available. Accessories, tools shown, and workholding devices are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: good (used), Year of construction: 2007, operating hours: 14,500 h, functionality: fully functional, turning diameter over cross slide: 370 mm, turning length: 1,000 mm, turning diameter: 340 mm, spindle bore: 62 mm, spindle speed (max.): 5,000 rpm, total height: 1,900 mm, total length: 3,200 mm, total width: 2,200 mm, overall weight: 7,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA LB300MC1000, OSP P200L control, V12 turret VDI40, V12 driven tools VDI40, manual tailstock, chip conveyor, coolant pump, standard spindle 5000 RPM, touch setter, Bwsdpeymfmnefx Alfow

Condition: new, table length 4000 mm table width 2000 mm table height 200 mm weight 2400 kg Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table lding table with 28 mm holes, p Technical Specifications • Material: Welded Q355 steel plate • Plate thickness: 25 mm • Hole diameter: Ø 28 mm • Hole spacing: 100 mm diagonal grid pattern • Engraved grid lines with 100 mm spacing • Three-day gas nitriding process • Surface hardness of the nitrided layer: HV 450–630 • Laser-engraved precision scale • Reinforced underside with weld seams and ribs • Enhanced corrosion resistance, fatigue strength and resistance to cyclic loading • Protection against adhering welding spatter Table Legs • 8 height-adjustable table legs • Working height: 820–865 mm • Leg adjustment range: 620–665 mm • Load capacity per leg: approx. 1,500 kg Accessories • Optional 40-piece accessory set including various stops, stop and clamping squares, clamps, prism clamping bolts and more Available Table Sizes (L × W × H) 1000 × 1000 × 200 mm 1200 × 1200 × 200 mm 1200 × 2400 × 200 mm 1500 × 1000 × 200 mm 1500 × 1500 × 200 mm 1500 × 3000 × 200 mm 2000 × 1000 × 200 mm 2000 × 1500 × 200 mm 2000 × 3000 × 200 mm 2000 × 4000 × 200 mm 3000 × 2000 × 200 mm Bwsdpfxoymf H Uo Alfew Notes The images are for illustrative purposes only and may differ from the actual dimensions. Our welding tables are manufactured by a renowned manufacturer exclusively for our distribution brand, GERD WOLFF Maschinenfabrik. Keywords 3D welding table system, welding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabrication, welding table with clamping bolts, welding table with precision scale, welding workstation with clamping system, professional industrial welding table lding table with 28 mm holes, precision fixturing table, welding and assembly table, 3D welding system, welding table with hole grid, welding table with diagonal grid pattern, nitrided welding table, steel welding table, height-adjustable welding table, welding table accessories, 3D welding fixture, modular clamping system, 3D clamping system for metalworking, welding table for mechanical engineering, welding table for metal fabric...

Condition: excellent (used), Year of construction: 1984, Maximum turning height 180 mm Distance between centers 1000 mm Swinging diameter over bed 350 mm Swinging diameter over cross slide 200 mm Bed width 255 mm Spindle bore 36.5 mm Spindle mounting, DIN 55027 Size 5 Speed range, 14 steps 28 – 2500 rpm Feeds, 9 longitudinal 0.04 – 0.4 mm/rev ditto, 9 facing 0.02 – 0.2 mm/rev 38 metric threads 0.2 – 18 mm 35 Whitworth threads 76 – 2“ 31 module threads 0.4 – 13.5 module 25 diametral pitch threads 36 – 2.6 pitch Tailstock mounting MK 4 Drive power 3 kW Machine dimensions L x W x H 2380 x 850 x 1800 mm Weight 1300 kg Accessories / Special features: • 2-axis digital display EASSON ES-8A • Quick-change tool holder system “Multifix” Size B • Chuck guard, foldable, electrically secured • Coolant system Bedpsyud Itefx Alfeww Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: used, Year of construction: 2003, Technical details: number of spindles: 6 spindle passage: 36 mm Article: cam-controlled multi-spindle automatic lathe Manufacturer: Schutte Type: SF32 S Dnt Yob: 2003 Eight-spindle automatic lathe with 6 main spindles max. nominal diameter: D=36mm!!! Spindle drum with hirth coupling, Elbaron oil mist filter, sorting chute, Interface for: IEMCA PRA bar loading magazine (optional I: IEMCA PRA52/42/F); coolant tank with hinged chip conveyor; Schimpke KSS active cooler, control: Siemens S7-300 PLC; tooling included in delivery may differ from the images; various collets are included in delivery up to D36mm Please, contact us for getting more information and pictures on mail(at) or * Bodpfx Asyqpqxolfeww

Condition: used, Year of construction: 1995, turning diameter 570 mm turning length 2000 mm control num + CNC Keller centre height 280 mm turning dia. over face-slide 365 mm spindle bore 62 mm spindle turning speed range 3 - 2500 U/min spindle head DIN 55 027 Gr. 8 cutting speed Konstant 1 - 9999 m/min feed in x - axis 0,01 - 50 mm/U feed range Z-direction 0,01 - 50 mm/U rapid travel - longitudinal/face 10 / 5 m/min feed power x-Achse 7100 N feed power z-Achse 12.500 N travel of cross-slide 345 mm upper slide travel 125 mm bed width 360 mm tailstock quill diameter 80 mm tailstock quill stroke 190 mm tailstock taper MT 5 max. workpiece weight -without tailstock 400 kg max. workpiece weight between centres 1000 kg max.workpiece weight:each extra steadyrest 300 kg Bwedpeyrhm Ujfx Alfjw threading metric 0,1 - 400 mm/Stg. dimensions of machine L x W x H 3,98 x 1,87 x 1,81 m Accessories: 3-jaw chuck RÖHM, 250 mmø; MULTIFIX-toolpost, solid steady, coolant

Condition: good (used), Year of construction: 2002, functionality: fully functional, spindle speed (min.): 3,200 rpm, total height: 1,700 mm, total length: 2,700 mm, total width: 1,900 mm, overall weight: 6,500 kg, Equipment: documentation/manual, rotational speed infinitely variable, OKUMA ES L II-M Year 2002 Bwedsyna Uispfx Alfow A small, very compact lathe with extensive capabilities. Control U-10L, parts catcher, touchsetter, V12 turret VDI 30— all driven positions, manual tailstock, chip conveyor, coolant pump, bar feeder Samsys MUS-3000 year 2007, including equipment, SMW chuck KNCS-N210-52, package with jaws and 24 tools optionally available.

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 180 mm turning dia. over face-slide: 75 mm Bwjdpfx Aley Emfwsfjw turning length: 325 mm facing movement (x-axis): 56 mm longitudinal traverse (z-axis): 176 mm control: Fanuc 21T range of revolution per miute: 20 - 6300 U/min external spindle dia. in forward position: 50 mm feed force Z - max.: 3000 N spindle bore: 30 mm Main spindle capacity: max. 3,7 kW electrics - voltage/frequency: 400 / 50- 60 V/Hz Weight approx.: 1,0 t dimension machine approx.LxWxH: 2,2 x 1,0 x 1,62 m The EMCO TURN 325 is a universal CNC/conventional lathe from the EMCO Group (Austria). It is positioned in the mid-range performance and size segment and is frequently used in training, workshops, and production. It is particularly designed for the precision machining of small parts, shafts, and chuck components. Automatic chuck Interface for bar feeder available Various accessories *

Condition: used, Year of construction: 1992, gebraucht 1992 010190 Bodeyycwxjpfx Alfsww prompt, Zwischenverkauf v 17900 € 1 320 mm 650 mm 160 mm 40 mm 192 mm 205 mm 5 5 MK 16 48 - 2500 1/min 24 0.02 - 0.63 mm/U 0.006 - 0.2 mm/U 0.25 - 8 mm 0.2 - 4 150 mm 100 mm 40 mm 3 MK 85 mm 2,4 / 3 kW 1582 mm 715 mm 1245 mm 680 kg Heidenhain 3-axis digital readout NEWRöhm 3-jaw chuck, 160 mm diameter, with internal and external jaws Quick-change tool post with one rectangular insert and one round insert Live centre Drill chuck Chuck guard Lead and feed screw guard Motor brake Coolant system Mounting feet Operating instructions in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: good (used), Spot welding machine, spot welding system, spot welding gun, resistance spot welding machine, lever-operated spot welding machine, roller seam welding machine, projection welding machine -Manufacturer: Dalex, spot and projection welding machine with roller table -Type: PMS 14-4 -Rated power: 200 kVA -Protrusion: 740 mm Bjdey Au Eyjpfx Alfoww -Operation: via foot pedal -Individual components: including documentation, see photos -Submission/Price: complete -Dimensions: Machine 2120/890/H1680 mm / Table 2730/800H1055 mm -Weight: 966 kg / 70 kg

Condition: excellent (used), functionality: fully functional, Automatic lathe Locatelli Ariete 3 Length of the cant max/min 1000/200mm Dimensions of the cant max/min 85×85/20x20mm Bwedpfsx Thw Dex Alfsw Maximum length of the processed material 120mm with a hole 150mm without a hole Automatic material feeder CE certificate Complete DTR documentation Main engine with a power of 3/4kw Two spindle speeds 2500/3600rpm Oil pump engine 2.2kw Working pressure 6-8bar

Condition: used, Year of construction: 2006, Technical details: turning diameter over bed: 500 mm turning dia. over face-slide: 290 mm turning length: 850 mm Bwjdpfx Aowtct Helfsw centre distance: 850 mm longitudinal traverse (z-axis): 900 mm facing movement (x-axis): 260 mm control: Manuaplus 4110 revolution per minute: 10 - 3000 / 2x seples U/min max. torque on the spindle: 920 Nm spindle bore: 70 mm facing movement (x-axis): 8 m/min. longitudinal traverse (z-axis): 10 m/min. operating hours - idle run: ca. 34.600 h tailstock taper ISO: MK 5 tailstock quill stroke: 180 mm total power requirement: 24 kVA Weight approx.: 5,2 t dimension machine xH: 2,2 x 3,2 x 1,9 m Multifix steel holder size C 3-jaw chuck Ø 250mm chip tray manual hour counter live center in tailstock Operation control panel and monitor Accessories: 4-jaw chuck Ø 250mm with internal jaws various chuck keys Machine lighting 8x foot plates 4x wedge lifters various pairs of jaws 1x steady rest Ø 100mm closed *