Used Gear Skiving for sale (11,744)

Condition: used, Year of construction: 2005, Technical details: workpiece diameter: 63,5 mm centre distance: 350 mm honing length max.: mm total power requirement: kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,70x2,x2,60 m Technical data G0504 working space Length of the clamping surface mm 1550 Number of T-slots mm 2 Width of the T-slots mm 18 Distance between T-slots mm 180 Center height (tailstocks) mm 350 Swivel range of the fine wheel head (U-axis) degrees Center distance - tailstock / fine wheel min./max. mm 120/225 Input resolution (all NC axes) mm / degrees Delivery slide Movement range (= Z-axis travel) mm 105 Input resolution mm Godpfx Aowrh H Noh Hjil tool Outside diameter min./max. mm 225/275 Hole diameter mm 160 Width mm 60 workpiece Outside diameter min./max. mm 40-150 Module min./max. mm 1.25-4.0 Tooth width max. Mm 45 weight Weight of the machine approx. Kg 5500 Operating fluid requirements Cooling lubricant recommendation, see chap. 8th Hydraulic fluid HLP D 46 approx. Itr 100 Speeds and feeds Tool speed (continuously adjustable) max. 1 / min 2000 Feed rates Rapid traverse / feed Z direction up to m / min 2 X direction up to m / min 2 U-direction up to m / min 2 V-direction up to m / min 2 C3 direction ree / sec 12 Electrical equipment Operating voltage V 400 Control voltage / lighting voltage V DC / AC 24/2 Frequency Hz 50 Power requirement approx. KVA 27 If the electrical installation has to be carried out according to customer specifications, only the information in the electrical documentation applies. Motor data Servo drives: Nm 1 / min Tool drive C1 27.0 00 Workpiece drive C2 27.0 00 X-axis 20.0 00 Z-axis 20.0 00 U-axis 6.0 00 Vertical portal (V1 axis) 6.0 00 Portal horizontal (U1 axis) Gripper axis of rotation C3 5.0 00 Loading slide (X1 axis) 5.0 00 Three-phase motors: KW 1 / min Hydraulic motor 1.5 1410 Central lubrication 0.07 Coolant pump 4 2840 Hydraulic equipment Delivery rate Itr / min 21 System pressure bar 50 Clamping pressure for: headstock max. Bar 35 Clamping tailstock min./max. bar 20 Only available if required. Not all limit values ??can necessarily be reached at the same time. If several maximum values ??come together in a processing task, performance restrictions must be expected! We reserve the right to make changes to the specified constructions, dimensions and weights *

Condition: excellent (used), mileage: 3,60,000 km, power: 265 kW (360.30 HP), first registration: 01/2010, fuel type: diesel, tire size: 385/65 R 22.5, axle configuration: 6x2, wheelbase: 4,800 mm, fuel: diesel, color: yellow, driver cabin: day cab, gearing type: mechanical, number of gears: 16, suspension: steel-air, number of seats: 2, total length: 10,000 mm, total width: 2,500 mm, total height: 3,300 mm, Year of construction: 2010, Equipment: differential lock, Drivetrain PTO: 2 uur = More information = General information Cab: single Registration number: BX-HR-86 Technical information Number of cylinders: 6 Engine capacity: 10.518 cc Drivetrain Make of engine: MAN Axle configuration Brakes: disc brakes Front axle: Tyre size: 385/65 R 22.5; Max. axle load: 9000 kg; Steering; Tyre profile left: 90%; Tyre profile right: 90%; Suspension: leaf suspension Rear axle 1: Tyre size: 315/70 R22.5; Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 70%; Tyre profile left outer: 70%; Tyre profile right outer: 70%; Tyre profile right outer: 70%; Suspension: air suspension Rear axle 2: Tyre size: 315/70 R22.5; Max. axle load: 7500 kg; Steering; Tyre profile left: 50%; Tyre profile right: 50%; Suspension: air suspension Weights Empty weight: 9.750 kg Carrying capacity: 18.250 kg GVW: 28.000 kg Condition Technical condition: very good Visual appearance: very good = Dealer information = For more photos see: Why you buy from Thomas Trucks? That choice is simple. Thomas Trucks is one of the independent trading companies worldwide in the field of used commercial vehicles. Here you can choose from an ever-changing stock of second hand trucks, tractors, trailers and trailers. Our offer includes all European brands, construction years and price ranges. Here you will always find a good vehicle for the right price! Thomas Trucks always has: - Sharp prices - Good service - Spacious, rapidly changing stock - Known quality - Decent business - We speak many languages - Accompaniment input and transport - (Export) license plate quickly arranged - Professional technical services - And more. Visit the website: and view our complete range and competitive offers We are open 6 days a week. Do you need help with exporting, importing, or shipping your vehicle? Contact our sales team. Selling your current vehicle to us is also possible. We do our best to display the data as accurately as possible, however no rights can be derived from this data We can also arrange financing for you within the Netherlands. Godpfx Ahsw S T Uqj Hoil

Condition: ready for operation (used), Year of construction: 1978, operating hours: 4,500 h, functionality: fully functional, workpiece weight (max.): 2,000 kg, wheel width: 600 mm, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 600 mm, rotary table diameter: 1,020 mm, position of the milling head: +-45 degrees, table diameter: 1,020 mm, feed rate X-axis: 8 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 2 m/min, total length: 4,500 mm, wheel diameter: 1,550 mm, gear diameter: 1,550 mm, total height: 3,300 mm, total width: 2,100 mm, input current: 50 A, input frequency: 50 Hz, workpiece diameter (max.): 1,580 mm, milling spindle length: 380 mm, type of input current: three-phase, milling length: 600 mm, spindle speed (max.): 200 rpm, table bore: 235 mm, spindle speed (min.): 28 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, grinding spindle motor power: 11,000 W, outer diameter: 1,580 mm, overall weight: 16,000 kg, rotational speed (max.): 200 rpm, rotational speed (min.): 28 rpm, table load: 2,000 kg, mount diameter: 235 mm, helix angle: 45 °, tool diameter: 235 mm, Equipment: documentation/manual, rotational speed infinitely variable, Gear Hobbing Machine — WMW MODUL ZFWZ 1250 The MODUL ZFWZ 1250 is a heavy-duty gear hobbing machine designed for accurate machining of large spur and helical gears. Manufactured in 1978 by WMW MODUL (Germany), the machine is known for its robust cast-iron construction, high rigidity, and long-term reliability in demanding industrial environments. The machine is capable of machining gears with a maximum gear diameter of 1,550 mm and a maximum workpiece diameter of 1,580 mm, handling workpieces weighing up to 2,000 kg. It offers a cutting (wheel) width of 600 mm and supports gear hobs with a diameter of up to 235 mm, making it suitable for medium to large gear production. The hobbing spindle features infinitely variable speed control from 28 to 200 rpm, allowing precise adjustment for different materials and cutting conditions. For helical gear machining, the machine is equipped with a tilting milling head (±45°), providing flexibility for various gear geometries. Gijdjx I Ntpjpfx Ah Hel A large rotary table with a diameter of 1,020 mm ensures stable and secure clamping of heavy workpieces. The machine is driven by an inverter-controlled main motor with a power of 11 kW, delivering reliable cutting performance under continuous operation. Power supply is three-phase, 50 Hz. With an overall machine weight of approximately 16,000 kg, the ZFWZ 1250 offers excellent vibration damping and machining stability. The machine is fully functional, ready for operation, and suitable for both production and refurbishment of large industrial gears. Key Features: *Gear hobbing for spur and helical gears *Maximum gear diameter: 1,550 mm *Maximum workpiece weight: 2,000 kg *Cutting width: 600 mm *Gear hob diameter: 235 mm *Infinitely variable spindle speed: 28–200 rpm *Tilting milling head: ±45° *Heavy-duty industrial cast-iron construction *Inverter-controlled main motor: 11 kW Typical Applications: *Heavy gear manufacturing *Large transmission components *Industrial gear production and refurbishment

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 40-200 mm Giedpfx Ahsxc E Ice Hol total power requirement: 31,3 kW weight of the machine ca.: 4 t dimensions of the machine ca.: 1,8 x 2,2 x 1,8 m

Condition: used, Year of construction: 2004, Technical details: max. wheel diameter: 200 mm gear width: 60 mm max. module: 7 weight of the machine ca.: 15 t table diameter: 180 mm table turning speeds: 100 U/min hob turning speeds: 750 U/min Godpfx Ahexc E H So Heil Machine in good condition, without feed, without automation Available 24.08.2024 *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 280 mm max. module: 5 min. module: 1 min. number of teeth: 7 toolpiece turning speed range: 4.000...10.000 U/min tool length: 210 mm Giodpfx Aowh Dlmeh Hsl CBN *

Condition: used, Year of construction: 2005, Technical details: Gijdoizlh Hspfx Ah Hsl weight of the machine ca.: 8 t dimensions of the machine ca.: 2,95 x 1,6 x 2,36 m chucking diameter: 250 mm swing diameter: 265 mm x-travel: 170 mm z-travel: 200 mm spindle turning speed range: 1.500 U/min spindle bearing diameter: 100 mm Pick-up machine *

Condition: used, Year of construction: 2002, Technical details: Gsdpfxewdyx Uj Ah Heil max. wheel diameter: 130 mm gear width: 170 mm max. module: 3 min. module: 0,5 total power requirement: 48 kVA weight of the machine ca.: 9 t dimensions of the machine ca.: 7,64 x 3,14 x 3,25 m For technical data, see PDF-File enclosed *

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: 200 mm gear width: 250 mm max. module: 3 min. module: 0,5 total power requirement: 45 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 4,4 x 2,4 x 2,7 m Machine out of prototype production Without automation Giedpfx Aex Iumnoh Hel *

Condition: used, Year of construction: 2015, Technical details: Gisdpfx Ahel Ha Ubo Hjl weight of the machine ca.: 4 t

Condition: used, Year of construction: 1985, Technical details: max. wheel diameter: 780 mm gear width: 130 mm max. module: 10 weight of the machine ca.: 8,5 t no. of strokes: 30 Hub/min Hier fully functional machine, Little used There are some Tools and Change gears Liebherr WSC501 CNC gear shaping machine, used, ready for use Manufacturer: Liebherr Type: WSC 501 Mach.- No.: 4407/05 Year of manufacture: 1985 Details: Max. gear shaping module: 8mm (30°gears possible up to module 10°) Max. gear width: 130mm Diameter of the machine table: 500mm Maximum wheel diameter: 780mm Shut height – table: 650mm Stroke rate min. 30DH/min Continuously adjustable max. 1500 DH/min. Operating voltage: 380V Frequency: 50Hz Giodpfxsxqgv Rs Ah Hel Control voltage: 110V Connected load: 36 kVA Rated current: 55A Weight: 8500kg Dimensions: approx. 4,85 x 3,655 x 3,78 (width x depth x height in m) The machine has seen only very limited use in our company. It remains fully operational and can be demonstrated in function upon appointment. Comprehensive documentation is also available The machine is particularly suitable for: ? Internal and external gearing in small batch sizes ? Internal gears in blind holes (non-through bores) ? External gears without run-out, where hobbing would not be possible Typical workpieces include: internal gear rings for planetary gear systems, drive shafts, coupling hubs, and more. Attractive Offer – Liebherr WSC501 CNC Gear Shaping Machine ????? ? ISO 9001 + EN 9100 Certified ? Excellent opportunity to acquire a robust German-made gear shaping machine ? Fully operational, with very limited usage history ? Demonstration possible upon appointment Highlights: - Suitable for internal and external gear shaping in small to medium batch sizes - Unique capability for internal gears in blind holes - Ideal for external gears without run-out, where hobbing would not be possible - Applications: planetary gear rings, drive shafts, coupling hubs, and more ????? Benefit: Save costs compared to new machines while still relying on Liebherr quality. Interested? Contact us today to arrange a viewing or request further technical details. *

Condition: used, Year of construction: 2014, Infeed and outfeed chain conveyor, with tool holders, chip conveyor, hydraulic unit and air conditioning. * Gsdpfx Ahsxtbmis Hjil

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 130 mm max. module: 3 total power requirement: 15 kW weight of the machine ca.: 6 t dimensions of the machine ca.: 2,3 x 2,5 x 2,17 m A well-preserved CNC hobbing machine Vertical for shafts and wheels With tailstock Also suitable for hard milling (good for steering pinion) Rapid traverse radial, axial: 10.000 mm/min Rapid traverse tangential: 7.500 mm/min Max. wheel diameter 130 mm Max. module 3 mm Tangential slide travel 200 mm Radial slide travel 10 / 100 mm Axial slide travel 300 / 200 mm Milling head speed 250-3500 U/min Milling head -swivable +/- 40 ° Tool diameter 80 mm Tool length - max. 240 mm Table turning speeds 5 - 1000 U/min Milling spindle drive 15 kW Feed range mm/min Table diameter 132 mm Control Sinumerik 840 C Connected load 40 kVA Motor output 15 kW Weight : 6 T Dimensions 2300 mm * 2500 mm * 2170mm Accessories : Hydraulical workpiece clamping Automatic loading system Magnetic chip conveyor * Gedpfx Ahjwv Uhbs Heil

Condition: used, Year of construction: 1999, Technical details: max. wheel diameter: 5 - 260 mm gear width: 400 mm max. module: 15 min. module: 0,5 gear hobbing diameter - internal: 30 mm max. helix angle: > 85 ° Aussenverz. max. helix angle: > 45° Innenverz. Testing Range vertical: 400 mm dist. between centers: 5 - 600 mm table diameter: 260 mm max. table load: 100 kg speeds: 30 1/min total power requirement: 1,6 kVA weight of the machine ca.: 900 kg Gisdpfx Asqvcnnoh Hol dimensions of the machine ca.: 200 x 1300 x 2150 mm CNC Gear Tester in good condition, out of OEM Test Lab. For measuring of spur and helical toothing, additional of rotationally symetric parts as true running, coaxiality, axial runout, etc. with tool changer ( 4 nos.) *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 80/120 mm max. module: 2,5 max. top circle diameter: 65 mm : 22 mm : 140 mm : 120 mm slide travel axial ( Z-axis ): 320/400 mm Dimensions (L/W/H): 3270 x 3240 x 2020 mm weight of the machine ca.: 6 t P60 - The compact all-rounder for wheels, shafts and worms Giodpfx Ajxrwpkoh Hjl The P60 is the smallest machine in the Gleason line of horizontal hobbing machines. The all-rounder not only mills spur gears with all rollable profiles, but is also the optimal solution for machining steering pinions and worms. with automatic loading system, extraction unit, chip conveyor, with balancing device with 2 tailstocks, with Artec process monitoring system, type CTM-BT1.1 *

Condition: used, Year of construction: 2002, Technical details: max. wheel diameter: mm gear width: mm weight of the machine ca.: 7000 kg dimensions of the machine ca.: 9130 x 3895 x 3450 mm max. top circle diameter: 80 mm max. length of teeth cutting: 170 mm Total length: 240 mm taper diameter: 32 mm slide travel radial ( X-axis ): 100 mm Gjdpfx Ahox Ea Ipj Hjil slide travel tangential ( Y-axis ): 160 mm axial movement Z-axis: 300 mm/min workpiece spindle - bore: 45 mm electr. connected load: 44 kVA

Condition: used, Year of construction: 1988, Technical details: max. wheel diameter: 210 mm total power requirement: 60 kW weight of the machine ca.: 8 t dimensions of the machine ca.: 2,85 x 2,60 x 1,80 m grinding slide feed: 700 mm grinding slide feeds: 1-15.000 m/min max. workpiece weight: 150 kg centre height: 260 mm Gsdpfx Aswrzutsh Heil grinding wheel diameter: 240 mm

Condition: used, Year of construction: 1997, Technical details: max. wheel diameter: 300 mm gear width: 110 mm max. module: 6 weight of the machine ca.: 10,5 t Gijdoxz Aw Espfx Ah Hjl *

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 275 mm gear width: 55 mm max. module: 6,5 min. module: 1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be “prepared” for the individual part procedure. I.e. direct measuring system + part gear brake, workpiece axis + license file for the production of individual parts. Gisdpfxev N Hilo Ah Hsl *

Condition: used, Year of construction: 2000, Technical details: max. wheel diameter: 180 mm max. module: 5 min. module: 1 Gjdjwv Ug Repfx Ah Hjil weight of the machine ca.: 14 t dimensions of the machine ca.: 4,5 x 2,84 x 2,8 m min. number of teeth: 7 toolpiece turning speed range: 4000-10000 U/min tool length: 210 mm With tail stock No dressing device Only CBN *

Condition: used, Year of construction: 1997, Technical details: max. module: 7 weight of the machine ca.: 5 t Gjdpfjx Aq Egsx Ah Hsil worm grinding diameter: 280-350 mm width of grinding worm: 84-104 mm min. number of teeth: 6 max. number of teeth: 600 max. top circle diameter: 360 mm max. workpiece weight: 60 kg without filter *

Condition: used, Technical details: max. wheel diameter: 46 mm max. module: 1 Gisdpfsx H Swbjx Ah Hsl weight of the machine ca.: 0,5 t

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 50 mm gear width: 20 mm max. module: 4 mm min. module: 0,1 mm total power requirement: 12,5 kW weight of the machine ca.: 4000 kg dimensions of the machine ca.: 2,2 x 2,5 x 2,3 m workpiece length - max.: 300 mm Gijdpfx Aoxxl Sgjh Hjl

Condition: used, Year of construction: 2008, Technical details: Godpfoxz Akfjx Ah Hoil max. wheel diameter: 300 mm gear width: 60 mm max. module: 5 weight of the machine ca.: 14 t table turning speeds: 80 - 200 U/min adjustment movement of the stroke: 400 mm length of stroke min./max.: 0-70 mm no. of strokes: 1500 Hub/min *

Condition: used, Year of construction: 2001, Technical details: max. wheel diameter: 200 mm gear width: 50 mm max. module: 6 table diameter: 168,14 mm boring diameter: 65,532 mm weight of the machine ca.: 11 t Gisdpfxoxz Avbo Ah Hol table turning speeds: 0-1.000 U/min length of stroke min./max.: 0-70 mm no. of strokes: 180-1.800 Stück *