Used test bench for sale (31)

Condition: excellent (used), For sale is a professional measurement station, the Wentworth Laboratories MP-0900, designed for testing and performing measurements on semiconductor components, circuit boards, and microelectronics. The device is equipped with a Wild Heerbrugg Epizoom 1:5 stereoscopic microscope with smooth magnification adjustment and a precise, movable measuring table. The design also features color-coded measurement ports. Data from the nameplate: Prsdezu Tnzspfx Abpea Manufacturer: Wentworth Laboratories, Inc. Model: MP-0900 Serial number: 123A Power supply: 230 V Frequency: 50 Hz Weight: approximately 34.6 kg Wild Heerbrugg microscope – manufactured in Switzerland Used condition, with normal signs of wear visible in the photos.

Condition: good (used), Inspection table / Measuring table Manufacturer: STOLLE Tabletop dimensions: (mm) 3,000 x 3,000 x 350 Accuracy class 1 Tolerance 0.04 mm Plate weight approx. 6,100 kg Prjdpfxszwpuco Abpoa Equipped with 13 legs for leveling.

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, programmable AC power source CHROMA Type 6415 : 641500000 363 Year of manufacture approx. 2000 Input values: Input voltage: 190 ~ 250 Volt AC Input frequency: 47-63 Hz Input current: max. 12 Amp. Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1 V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies > 500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1 Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relays - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-on Additional connections: - 9-pin D-Sub (Trigger In, AC On, etc.) - 25-pin D-Sub (Printer) - BNC (EXT VREF) Pjdpfx Asdz Srbobpera - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) - 25-pin D-Sub (System I/O) - 3x BNC (Sync / Clock / VREF) - Manual in PDF format Footprint H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition 2 units available, price per unit

Condition: good (used), For sale is a solid, planed, and precision-ground metal layout and measuring table with a sturdy steel frame. The massive, machined work surface is ideally suited as a precise reference and work surface in mechanical engineering, toolmaking, mold making, quality assurance, as well as in locksmithing and metalworking. Due to its robust design, the table offers a very stable and durable work base. Features: * Solid metal plate * Planed / finely machined surface * Sturdy steel frame Predszwv Hxspfx Abpja * Additional storage space in the frame * Very heavy and robust design * Lateral holes in the plate * Used, condition appropriate for its age Suitable for, among other things: * Layout work * Measuring and inspection work * Aligning and checking workpieces * Use with height gauges and dial indicators * Tool and fixture construction * Mechanical engineering and metalworking The surface shows signs of wear and tear due to age and use, but is overall in good used condition. Plate dimensions: Length: approx. 1000 mm Width: approx. 1000 mm Due to the massive and heavy design, only pickup is possible. An inspection is possible by appointment. The stated selling price is NET, plus 20% VAT. VAT can be shown separately. Subject to prior sale and errors.

Condition: excellent (used), functionality: fully functional, Granite measuring table without height measuring device! Prjdjxwp Icepfx Abpea Condition: very good (like new) With low-vibration base, ideal for precise measuring tasks in production and quality assurance. Dimensions: L/W/H 660 mm x 660 mm x 800 mm; thickness of the granite plate 160 mm.

Condition: good (used), functionality: fully functional, total width: 600 mm, total length: 800 mm, total height: 200 mm, overall weight: 185 kg, space requirement width: 600 mm, space requirement length: 800 mm, space requirement height: 200 mm, -WR 168- Offered here is a measuring plate from the manufacturer Orion. Technical data: Flatness: DIN 876, accuracy class 1 Prsdpfx Aozwcp Tebpsa Length: approx. 800 mm Width: approx. 600 mm Height: approx. 120 mm Minimum foot height: approx. 60 mm Maximum foot height: approx. 85 mm Weight: approx. 185 kg

Condition: good (used), Gossen Metrawatt Profitest 204+ Professional, portable testing system from Gossen Metrawatt (GMC-I) for safety testing in accordance with VDE 0113 / EN 60204-1 (safety of machinery). Technical specifications of the complete system: Manufacturer: Gossen Metrawatt (GMC-I), Made in Germany Standards compliance: Testing strictly in accordance with DIN EN 60204-1 / VDE 0113 (Safety of machinery) Protective conductor test: Test current: > 10 A AC at 4 V~ (supplied by the base unit) Measurement range: 0 to 2 Ω Insulation test: Test voltages: Adjustable from 100 V to 500 V DC Measurement range: 0 to 3 GΩ High-voltage test (Module 204HP-2.5 kV): Test voltage: Adjustable from 250 V to 2500 V AC (alternating voltage, 50 Hz) Trip current (limit): Adjustable in steps (e.g., 10 mA, 100 mA) for reliable detection of insulation breakdown Power: Max. 500 VA (short-circuit proof for short durations) TAM test and adapter box: Connections: 16 A CEE (5-pin) & 32 A CEE (5-pin), both with secure 1h coding Laboratory sockets: 4 mm safety banana sockets for single-conductor connection (PE, L1, L2, L3) Scope of delivery for the complete system: Base unit: Gossen Metrawatt PROFITEST 204+ High-voltage module: Profitest 204HP-2.5 kV (Type M505A) for dielectric strength testing up to 2500 V AC Test and adapter box: GMC TAM test box with integrated Mennekes CEE panel-mount sockets (16 A and 32 A with special 1h test coding) and 4 mm safety sockets (PE, L1, L2, L3) Accessories: 2x red high-voltage test guns, including a robust cable set Mobility: Original transport trolley with extendable handle and sturdy wheels "A complete solution: We would be happy to offer you suitable bank financing for your project." Psdpfx Ajzwlwmebpsra komplett-konzept.leasingo.de You can find more items—both new and used—in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 2025, KT 1880B Multifunction Safety Tester KT 1880B Multifunction Safety Tester – Automated Testing in a 6U Format The KT 1880B is a compact safety tester in a 19-inch rack-mount format (5U) that combines all relevant test types into a single unit: high-voltage testing (AC/DC), protective earth testing, insulation testing, equivalent leakage current testing, functional testing, and continuity testing. The KT 1880B thus meets the requirements for efficient, safe, and standards-compliant safety testing in accordance with IEC, EN, UL, VDE, and other international standards—making it ideal for final testing, production, and quality assurance. Technical Specifications - High-voltage test AC: 100 – 5,500 V / 0 – 3 mA - High-voltage test DC: 100 – 6,000 V / 0 – 10 mA - Insulation measurement DC: 100 – 6,000 V / 250 kΩ – 1 GΩ - Protective earth test AC: 10 – 30 A / 0 – 400 mΩ - Equivalent leakage current test AC: 100 – 270 V / 0 – 10 mA - Continuity test DC: 24 V / 0 – 600 mA - Functional test / Current consumption AC: 4 A (Option: 1 A, 10 A, or 16 A) - Wide-range power supply: 90 to 253 V / 50 Hz / 60 Hz Test Automation & Ease of Use Thanks to its integrated 4.3" TFT color display, intuitive menu navigation, and freely configurable test programs, the KT 1880B enables fully automated test sequences. The device under test requires only a single connection—no need to switch cables. This significantly reduces testing times and potential sources of error, offering a distinct advantage, particularly in automated production environments. Pjdpfx Abszwlfwepera Compliance with Standards & Workplace Safety With a short-circuit current of 3 mA AC / 10 mA DC, the KT 1880B meets the EN 50191 requirements for safety-current-limited devices. This allows it to be operated by non-specialist personnel—making it ideal for companies with mixed testing teams. Fully Electronic High-Voltage Generator The integrated digital high-voltage generator ensures high accuracy and stable test results—even during demanding test cycles and under production conditions. Typical Applications - Series production & final testing - Type testing according to international safety standards - Production of electrical devices, components, & assemblies - Automated testing environments & test benches A Combination of Flexibility, Safety, and Automation The KT 1880B is the ideal solution for safety testing in industrial environments. With six integrated test modes, fully electronic high-voltage technology, intuitive operation, and a safety-current-limited design, it meets all the requirements for modern automated testing. SPS KT 1880B Safety Tester Year of manufacture: 2025 Manufacturer's price: €6,545 (gross) Calibration date: March 6, 2025 Remaining warranty included Accessories A3/1800-K Connection and control console + CEE16; manufacturer's price: €1,318 (gross) Knürr TW 05 equipment trolley, pre-assembled with: HL 02 Holder for high-voltage test pistols SP 02 / SP 03 HL 81 Holder for protective conductor test probe PE 81-i KH 01 Cable holder Manufacturer's price incl. accessories: €3,300 (gross) "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs on request!

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Included in the set: Bosch high-voltage inverter Original Bosch transport case Foam transport protection Bosch transport documentation Test and quality control reports Condition: Predpfxezl H Hxo Abpea 100% technically functional. Very good visual condition. Complete with original documentation and transport case. Sold exactly as shown in the pictures.

Condition: excellent (used), For sale is a Karl Süss HR 100 Analyse – a high-end, manual measurement and testing station designed for the analysis and contacting of semiconductor wafers and microelectronic components. The device is used in laboratories, research and development departments, and during scientific research. Prsdpozl H Ayefx Abpoa The station is equipped with a precise measurement table with fine adjustment, a sample holder with a vacuum function, and a mechanical lifting mechanism. It also has connections for compressed air and vacuum, which ensures stable mounting of the components being tested during measurements. Technical data: Manufacturer: Karl Süss Model: HR 100 Analyse Device type: manual testing station (Wafer Probe Station) Application: analysis and testing of semiconductor wafers and microelectronic components Vacuum function for sample mounting Precise measurement table Connections for compressed air and vacuum Condition: used, as shown in the pictures.

Condition: ready for operation (used), Year of construction: 2005, A bevel gear rolling test machine Gleason is available. Workpiece diameter: 330mm, max. center distance: 203mm, driver spindle nose distance range: 100mm-250mm, max. offset range upper/lower: 203mm/50mm, driver spindle bore: 99mm, driver spindle taper per meter: 15.5mm/m, counter spindle bore: 58mm, counter spindle taper per meter: 12.7mm/m, spindle speed: 1500rpm, test angle range: 0°-180°, driver spindle repeatability: +/-0.004mm, runout: +/-0.003mm, machine dimensions X/Y: approx. 1550mm/2050mm, weight: approx. 2400kg. An on-site inspection is possible. Prjdpfexltu Njx Abpoa

Condition: used, Year of construction: 2013, functionality: fully functional, total width: 1,000 mm, total length: 2,500 mm, total height: 1,020 mm, Optical table Perforated plate made of stainless steel (11 cm) Frame: 80x82x155 cm (H x W x L) Prsdpfozrfl Hsx Abpja

Condition: good (used), Hard stone measuring plate Granite Pedpfxozp I Tuj Abpora 2000 x 1000 x 250 mm including stand

Condition: new, Professional test cover (prufhaube) from the renowned German manufacturer SCHLEICH – model 13-R2. The device is designed for laboratory and industrial use, ensuring maximum safety during high-voltage electrical testing. The unit is in factory-new, warehouse condition – it has never been used. ⚙️ Technical specifications: manufacturer: SCHLEICH (Germany) model: 13-R2 type: test cover / prufhaube year of production: 04.2023 serial number: 21942 country of origin: Germany ✅ Key features: professional test zone (“forbidden zone”) transparent cover – full process control safety system (locks / sensors) robust industrial construction high manufacturing quality – made in Germany ideal for HV/electronics/production testing 📦 Condition: New – warehouse stock, unused. May have minimal storage marks. Prjdpfxoy Aggcs Abpoa 📸 Included: device as shown in the pictures

Condition: used, functionality: fully functional, total width: 860 mm, total length: 2,540 mm, total height: 750 mm, overall weight: 600 kg, plate height: 120 mm, Optical table (Newport) - Dimensions 2400 x 900 x 200mm - inkl. threads for clamping Predpfx Abszfxtqepea - with damped steel frame - working level 750mm

Condition: used, High-voltage tester, high-voltage test device, high-voltage tester for HV, PE, IS measurement Test console, test station, measuring station, test device, measuring device ELABO Type PE/IS/HV / 91-3J.3 + SHV 16 / 90-1V.3 + 90-9B.3ZM92510 The device PE/IS/HV / 91-3J.3 is used to measure voltage strength, insulation resistance, and protective conductor voltage drop in accordance with VDE0113 and IEC standards according to EN60204, Part 1. Serial No.: Year of manufacture: 2003 Rated voltage: 230 VAC Pjdped Dc Unefx Abpsra Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device SHV 16 / 90-1V.3 provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Serial No.: Year of manufacture: 2005 Mains voltage: 230 VAC Mains frequency: 50 Hz Rated current: 1 A Noise suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO testers, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0063475 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1460 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57820 and 57821.

Condition: excellent (used), Year of construction: 2017, For sale is a Jenoptik test table of the type T8000 Wavemove for housings Predpfxomfty Hs Abpsa The device was used for housing surface testing as the type describes and is in good to very good condition Year of manufacture: 2017 Weight: 2,500 kg The offer includes the components shown as well as computers and software Loading & or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: excellent (used), Year of construction: 2000, For sale is a Jenoptik test table of the type T8000 Wavemove for housings Pedpfx Abovkxa Eopsra The device is in very good condition and ready for immediate use with many additional attachments Year of manufacture: 2000 Weight: 2,500 kg The offer includes the components shown as well as computers and software Loading and/or shipping possible for an additional charge Prices plus VAT Viewing possible by appointment. Contact us, our team will be happy to help you. Trade-in or exchange possible! Machine purchase/sale PURCHASE/SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or contact options, visit us on our website

Condition: used, Tabletop clamping surface: 228 x 273 mm 3 T-slots: 12 mm 4 x 4 threaded holes in between: M 8 Pjdpfx Asbbgcxsbpora Table height in zero position: 146 mm Space required: 250 x 290 mm Weight: 41 kg

Condition: used, Testing console, testing station, measuring station, testing device, measuring device, tester for HV, PE, and IS measurements ELABO Type PE/IS/HV SCT 42 / 91-3J.3 + 90-1V + 90-9B.3ZM92510 High-voltage testing device Prodpfsf Axn Aox Abpea PE/IS/HV SCT 42 / 91-3J.3 is used for measuring voltage resistance, insulation resistance, and the voltage drop of the protective conductor, in accordance with VDE0113 or IEC standards, as per EN60204, Part 1. Serial No.: 0064016 Year of manufacture: 2004 Rated voltage: 230 VAC Rated frequency: 50 Hz Rated current: 6.3 A - Protective conductor resistance measurement - Insulation resistance measurement - Protective conductor voltage drop measurement The device 90-1V provides a highly stable direct voltage with low ripple. One output pole carries high voltage, and the other output pole is close to ground and can be set to a potential of up to 300 V. Device No.: 90-7WZ006 Year of manufacture: 2000 Supply voltage: 230 VAC Supply frequency: 50 Hz Rated current: 1 A Interference suppression according to VDE 0871 Rated power: 14 watts Output voltage: 0 - 6.0 kV / DC Output current: 0 - 2 mA Connection unit for ELABO tester, switching matrix, connector unit ELABO Type 90-9B.3ZM92510 Serial No.: 0097588 Year of manufacture: 2009 Rated voltage: 230 VAC Rated frequency: 49 - 61 Hz Rated current: 1 A Number of test points: 5 - Device unit, compact on a rolling frame - Various connection cables and accessories as shown in the picture Overall dimensions L x W x H: 580 x 700 x 1380 mm Total weight: 100 kg Good condition Many other ELABO devices are available under storage numbers 57819, 57820 and 57821.

Condition: used, Programmable AC Power Source Voltage Regulator Laboratory power supply, power supply, Programmable AC Power Source CHROMA Type 6415 : 64150296 Year of manufacture approx. 2000 Pedpjdz Sraefx Abpjra Input values: Input voltage: 190 ~ 250 Volts AC Input frequency: 47-63 Hz Input current: max. 12 Amps Output values: Output voltage range: 0 to 150 VAC / 0 to 300 VAC Max. output current: 15 A / 7.5 A Output power: 1500 VA Efficiency: 80% Number of output phases: 1 Accuracy: 0.2% + 0.2% of F.S. Resolution: 0.1V Distortion: 0.5% for frequencies 45 - 500 Hz 1.0% for frequencies >500 - 1 kHz Line regulation: 0.1% Load regulation: 0.1% Output frequency: 45 - 1000 Hz Accuracy: 0.1 Resolution: 0.1Hz Measurement: V, F, I, P, PF, CF MAIN FUNCTIONS: - High measurement accuracy for RMS voltage, RMS current, active power, frequency, power factor and current crest factor - Built-in power factor correction circuit - Programmable current limiting - Integrated output isolation relay - EEPROM memory for user-defined voltage and frequency combinations for instant recall at any time - Optional GPIB, RS-232 and analog programming interface - Overvoltage, undervoltage, overpower, overcurrent, overtemperature and short-circuit protection - Temperature-controlled fan speed - Self-test on power-up - Condition as shown, without additional accessories and connection cables Additional connections: - BNC (EXT VREF) - 9-pin D-Sub (RS-232C interface) - 24-pin Centronic (GPIB) Dimensions H x W x D 221.5 x 425 x 567 mm Weight: 23 kg Good condition

Condition: good (used), Year of construction: 1987, functionality: fully functional, total width: 1,500 mm, total length: 1,000 mm, overall weight: 855 kg, WAG 894- Offered here is a Novalith hard stone surface plate. Surface plate dimensions: 1500 mm x 1000 mm x 190 mm. Year of manufacture: 1987. Weight: approx. 855 kg. Flatness (specified): 20 μm. Flatness (actual): 50 μm. Predpfey Auuhex Abpsa

Condition: used, Year of construction: 2001, functionality: fully functional, total width: 1,400 mm, total length: 3,500 mm, total height: 800 mm, overall weight: 7,500 kg, Measuring plate from CMM utilization with adjustable feet Prjdeu Uiitspfx Abpoa

Condition: used, functionality: fully functional, total width: 700 mm, total length: 1,400 mm, total height: 500 mm, overall weight: 2,000 kg, space requirement width: 700 mm, space requirement length: 1,400 mm, space requirement height: 850 mm, Attention only measuring plate from CMM utilization with table frame Podevfn Ihepfx Abpera

Condition: good (used), Wenzel roughness and contour measuring station for crankshafts  Measuring plate made of hard stone length: 3670 mm Pjdpfx Aboihillepsra width: 850 mm Flatness tolerance according to DIN 876/1 Nominal value 48 µm Actual value 32 µm Ident No.: 14280 JFA unwinding trestles Financing through our bank is also possible. komplett-konzept.leasingo.de Further measuring plates in other sizes - new and used - can be found in our shop! International shipping costs on request!