Used Gildemeister Ctx 410 for sale (236)

Condition: used, Year of construction: 2011, Technical details: weight of the machine ca.: 11 t Crsdjyz Sdqjpfx Abxjf Gildemeister MF Twin 65-II lathe with loading automation. This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: used, Year of construction: 2003, Technical details: weight of the machine ca.: 11 t Gildemeister MF Twin 65-II lathe with loading automation. Codpfoyzyudjx Abxjrf This machine is suitable as a counter spindle machine for 4-axis machining on the main and counter spindles, complete machining (turning, drilling, milling, Y-axis, B-axis) of bar and shaft parts. *

Condition: good (used), Year of construction: 2003, All parts shown by hand not come. Codpfx Ajyyniaebxerf Technical details are shown on picture.

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 08500, turning diameter over cross slide: 225 mm, turning length: 1,000 mm, turning diameter: 400 mm, spindle speed (max.): 4,000 rpm, controller model: EPL 2, TECHNICAL DETAILS Maximum turning diameter: 400 mm Turning length: 1,000 mm Swing diameter over bed: 400 mm Swing diameter over cross slide: 225 mm X-axis travel: 260 mm Z-axis travel: 1,040 mm Main spindle Speed range: 20 - 4,000 rpm Drive power: 11 kW Maximum torque: 75 Nm Spindle bore: 72 mm Chuck diameter: 185 mm Spindle nose: 140H5 Spindle diameter at front bearing: 100 mm Tool turret Number of tool stations: 12 positions Tailstock Quill diameter: 80 mm Quill stroke: 100 mm Tailstock taper: MT 4 Maximum quill pressure: 8,000 N Feeds Crjdpfx Aeyxm Tnjbxjf Rapid traverse (X/Z axis): 10 m/min Feed speed (X/Z axis): 5 m/min Feed force (X axis): 5,000 N Feed force (Z axis): 8,000 N MACHINE DETAILS Control model: EPL 2 Operating voltage: 380 V Frequency: 50 Hz Operating current: 76 A Total power requirement: 29 kW Dimensions & Weight Space requirement approx.: 4.6 x 2.1 x 2.0 m Machine weight approx.: 4.0 t EQUIPMENT Chip conveyor Three-jaw chuck Documentation

Condition: good (used), Year of construction: 1984, functionality: fully functional, Swing diameter over bed: 560 mm Swing diameter over cross slide: 250 mm Spindle bore: 65.3 mm Max. power: 15 kW Speeds: 11.2 - 2,240 rpm Distance between centers: 1,000 mm Quill diameter: 80 mm Quill taper: MT 5 Including chip conveyor Including complete documentation Cjdpfevn Rlzex Abxorf Immediately available from stock

Condition: used, GILDEMEISTER NEF 320 is a CNC turning lathe engineered for precision machining, high accuracy and operational reliability. Working capacities: max. turning diameter 320 mm, max. turning length 740 mm, centre height 160 mm, distance between centres 750 mm, spindle hole 52 mm; travels Z 700 mm, X 185 mm. Main specs: spindle power 11 kW, max. torque 410 Nm, speeds stepless 4–4000 t/min, spindle taper MT 6; tailstock Morse taper 5, spindle stroke 120 mm, spindle diameter 70 mm; rapid traverse X 8 m/min, Z 10 m/min; weight ~2000 kg, dimensions 2450×1668×1825 mm. Enables tight tolerances; typical applications include automotive, watchmaking, toolmaking, aerospace and medical sectors. Cedpfx Abjyxnugsxorf

Condition: excellent (used), Year of construction: 2004, - Fagor digital display - Accessories available Working area Max. turning diameter over bed: 350 mm Max. turning diameter over cross slide: 200 mm Centre height: 180 mm Centre distance: 1000 mm Bed width at guideway level: 255 mm Top slide travel towards headstock: 60 mm Top slide travel away from headstock: 55 mm Spindle nose with flange according to ISO 702-3 (DIN 55027) C6 (DIN 6) Spindle taper: Morse taper 6 Spindle bore: 54 mm Tailstock quill taper: Morse taper 4 Tailstock quill travel: 100 mm Tailstock lateral adjustment: ± 10 mm Spindle speed range, stepless: 40 – 2500 rpm Feed levels: Longitudinal feed: 9 Cross feed: 9 Feed rates: Longitudinal feed: 0.04 - 0.4 mm/rev Cross feed: 0.02 - 0.2 mm/rev Metric threads: Number: 28 Pitch: 0.2 – 4.5 mm Inch threads: Number: 21 Pitch: 76-8 TPI Module threads: Number: 28 Pitch: 0.2-4.5 mm Crjdpfxjyvy Rno Abxef Diametral pitch threads: Number: 21 Pitch: 76-8 DP Leadscrew thread pitch: 6 mm Tool holder section: 20x20 mm Max. spindle torque: 200 Nm Main drive power: 4 kW (5.5 HP) Electric pump power: 0.12 kW (0.16 HP) Synchronous speed of main motor at 50 Hz: 1500 rpm / at 60 Hz: 1800 rpm Synchronous speed of coolant pump motor at 50 Hz: 3000 rpm / at 60 Hz: 3600 rpm Machine dimensions Length x width x height: 2300 x 940 x 1400 mm Weight: 1500 kg

Condition: used, CNC control, Numeric Control, from MAX MÜLLER GILDEMEISTER MD 5S, type Eltropilot M Year of manufacture approximately 1980 Rack with 20 module slots – 12 installed modules Installed modules: 1 piece 0.651.406-19.3 UNI Universal Interface 1 piece 0.650.847-56.1 O32 Output card 2 pieces 0.651.708-57.3 I32 Input card 1 piece 0.652.138-36.1 APC Crjdpfeflrtxex Abxof 1 piece 0.651.928-25.3 LAB Storage control 1 piece 0.651.400-22.3 1 piece 0.860.204-59.1 B32 1 piece 0.652.128-35.0 RE4 1 piece 0.651.269-26.0 ITY Serial interface 1 piece 0.651.974-23.2 ABS Termination card 1 piece 0.651.298-18.3 CPU Central processor Dimensions W x H x D 480 x 260 x 220 mm Weight 7 kg Individual cards available upon request.

Condition: used, Year of construction: 2001, turning diameter . mm turning length . mm control . type . CCUO turning diameter over slide rest . mm cross movement . mm spindle passage . mm turning speeds . U/min transmission ratio . quill stroke . mm rapid traverse . m/min main drive motor . kW 3-jaw-chuck diameter . mm total power requirement . kW weight of the machine ca. . t dimensions of the machine ca. . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale Cjdpfx Aboyqwb Esxjrf apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 1996, number of axes: 2, This Gildemeister MF twin 65 was manufactured in 1996. It features two turrets, each with 12 tool positions, all motorized-capable, and includes 14 driven tools and 14 tool holders. The machine boasts both spindles in very good condition and a bar passage of 65 mm, complemented by a Cucchi Pietro bar feeder. Contact us for more information about this machine. Crsdpfjyaqr Asx Abxjf • 2 turrets (12 + 12 tool positions), all motorized-capable • Bar passage: 65 mm • Both spindles in very good condition • New hydraulic/power unit pump Additional equipment • Cucchi Pietro bar feeder • 14 driven tools • 14 tool holders

Condition: ready for operation (used), Year of construction: 2010, operating hours: 29,200 h, This Gildemeister Sprint 20-8 was manufactured in 2010. It features a cooling system with a 600l capacity and 50µm filter, alongside a high-pressure pump option of 8 or 20 bar. The machine includes a Bristol B270/E oil mist separator and an IEMCA Boss 332E bar loader for 3m bars. With a chip discharge height of 1,250mm, it's designed for efficient operation. Contact us for more information about this machine. Specification • Control system: Fanuc 310i-S • Mechanical and electrical preparation for fire extinguishing system • Coolant system suitable for oil (max. 32 cSt) and emulsion • Coolant tank capacity: 600 liters • Coolant filtration: 50 µm • Coolant chiller unit • Coolant pump pressure: 8 bar • Coolant pump pressure: 20 bar • Chip conveyor • Chip discharge height: 1250 mm • Bar loader: IEMCA Boss 332E • Maximum bar length: 3 m Cedex D H I Tjpfx Abxsrf • Oil mist separator: Bristol B270/E • Sliding headstock travel: 80 mm • Tooling on slides • Tool breakage detection system • Machine commissioning (max. 3 days) • Spindle bore: 25 mm (upgraded) • Machine duty hours: 29,200 h Machine Benefits Technical Machine Benefits • Chip discharge height: 1250mm Extra Information Machine still under power

Condition: ready for operation (used), Year of construction: 2005, operating hours: 68,410 h, functionality: fully functional, machine/vehicle number: 4903-0234, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Placing a bid constitutes an obligation to collect the item by the deadline of 15/11/2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL SPECIFICATIONS Crjdpfsxnxnyjx Abxof Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar key width for hexagonal material: 36 mm Max. bar side length for square material: 29 mm Max. bar stroke in one station: 130 mm Max. bar stroke in two stations: 260 mm Max. stroke radial slides: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. stroke axial slides: 72 mm Max. rapid traverse speed: 9.6 m/min Max. stroke tool spindles: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated power main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 68,410 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2011, operating hours: 40,724 h, functionality: fully functional, machine/vehicle number: 8018030323B, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Submitting a bid obligates you to collect the item on time, no later than 15.11.2025! The following machines are also being sold exclusively via auction at the same location: Gildemeister GM 42-6, year 2005: Search ID A20302860 Gildemeister GM 42-6, year 2004: Search ID A20303020 Gildemeister GM 42-6, year 2007: Search ID A20303190 Gildemeister GM 42-6, year 2005: Search ID A20303220 Gildemeister GM 42-6, year 2007: Search ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool stations: 12 Max. bar diameter for round stock: 42 mm Max. bar AF for hex stock: 36 mm Max. bar side length for square stock: 29 mm Max. bar feed per station: 130 mm Max. bar feed across two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, fwd/rev: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle travel: 120 mm Adjustment, fwd/rev: 10 mm MACHINE DETAILS Dimensions & Weight Csdpfjxnxkhox Abxjrf Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated power main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 40,724 h EQUIPMENT Bar feeder (length: approx. 3000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2007, operating hours: 57,860 h, functionality: fully functional, machine/vehicle number: 4903-0261, The submission of a bid obligates the buyer to collect the item by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 TECHNICAL DETAILS Maximum turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round stock: 42 mm Max. across flats for hexagonal stock: 36 mm Max. side dimension for square stock: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. travel of radial slides: 52 mm Radial slide adjustment, forward/backward: ±20 mm Max. travel of axial slides: 72 mm Max. rapid traverse speed: 9.6 m/min Max. travel of tool spindles: 120 mm Adjustment, forward/backward: 10 mm MACHINE DETAILS Codpfxoxnxqbo Abxsrf Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated power of main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 57,860 h EQUIPMENT Bar feeder (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2005, operating hours: 69,287 h, functionality: fully functional, machine/vehicle number: 4903-0238, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Placing a bid obligates you to collect the machine by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, year 2004: Search ID A20303020 Gildemeister GM 42-6, year 2011: Search ID A20303110 Gildemeister GM 42-6, year 2007: Search ID A20303190 Crodsxnxapspfx Abxjf Gildemeister GM 42-6, year 2005: Search ID A20303220 Gildemeister GM 42-6, year 2007: Search ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar width across flats for hexagon material: 36 mm Max. bar width across flats for square material: 29 mm Max. bar stroke in one station: 130 mm Max. bar stroke in two stations: 260 mm Max. stroke radial slide: 52 mm Radial slide adjustment, fore/aft: ±20 mm Max. stroke axial slide: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Adjustment, fore/aft: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Rated power: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 69,287 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2004, operating hours: 46,942 h, functionality: fully functional, machine/vehicle number: 4903-0208, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Submission of a bid obligates the buyer to collect the item on time, no later than 15/11/2025! The following machines will also be sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2007: Listing ID A20303190 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of cross slides: 4 Credpfx Aexnxgpjbxef Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round stock: 42 mm Max. across flats for hexagonal stock: 36 mm Max. width for square stock: 29 mm Max. bar feed per station: 130 mm Max. bar feed over two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, forward/backward: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle travel: 120 mm Adjustment, forward/backward: 10 mm MACHINE DETAILS Dimensions & Weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main Motor Main motor rated power: 22 kW Main motor speed: 1,455 rpm Coolant tank capacity: 750 L Operating hours: 46,942 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Additional accessories

Condition: ready for operation (used), Year of construction: 2007, operating hours: 55,585 h, functionality: fully functional, machine/vehicle number: 4903-0266, number of spindles: 6, spindle speed (max.): 2,700 rpm, bar diameter (max.): 42 mm, turning diameter: 42 mm, Equipment: bar feeder, Placing a bid obliges you to collect the machine by the deadline of 15.11.2025! The following machines are also being sold exclusively via auction from the same location: Gildemeister GM 42-6, Year 2005: Listing ID A20302860 Gildemeister GM 42-6, Year 2004: Listing ID A20303020 Crodpfx Asxnxm Aebxef Gildemeister GM 42-6, Year 2011: Listing ID A20303110 Gildemeister GM 42-6, Year 2005: Listing ID A20303220 Gildemeister GM 42-6, Year 2007: Listing ID A20303265 TECHNICAL DETAILS Max. turning diameter: 42 mm Main spindle speed: 500–2,700 rpm Number of spindles: 6 Number of side slides (cross slides): 4 Number of tool spindles: 6 Number of tool positions: 12 Max. bar diameter for round material: 42 mm Max. bar across flats for hexagonal material: 36 mm Max. bar side length for square material: 29 mm Max. bar stroke at one station: 130 mm Max. bar stroke at two stations: 260 mm Max. radial slide travel: 52 mm Radial slide adjustment, forward/back: ±20 mm Max. axial slide travel: 72 mm Max. rapid traverse speed: 9.6 m/min Max. tool spindle stroke: 120 mm Adjustment, forward/back: 10 mm MACHINE DETAILS Dimensions & weight Dimensions (L × W × H): 4,550 × 1,680 × 2,050 mm Dimensions (L × W × H, with bar feeder): 6,035 × 1,680 × 2,050 mm Weight: 9,800 kg Weight with bar feeder: 10,000 kg Main motor Rated output of main motor: 22 kW Main motor speed: 1,455 rpm Coolant tank volume: 750 L Operating hours: 55,585 h EQUIPMENT Bar magazine (length: approx. 3,000 mm) Work tables Further accessories

Condition: used, Hydraulically self-centering center, rest, or support – SMW AUTOBLOK Hydraulic center with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Center base: 245 x 240 mm Design: fixed - 3 pieces of roller bearing, Ø 35 mm - Roller width 18 mm Crodpfoiv Irlox Abxjf - Hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Weight: 65 kg Good condition

Condition: excellent (used), Year of construction: 2002, CNC Turning-Milling Center GILDEMEISTER TWIN 500 Linear Year of manufacture: 2002 Siemens control system Technical data: Swing diameter: 610 mm Turning diameter: 610 mm Turning length: 1870 mm Drive power: 69 kW Spindle speed: 3,200 rpm C-axis torque: 650 Nm Main spindle - left Chuck diameter: 250–500 mm Max. bar diameter: 102 mm Upper slide Rapid traverse speed X/Y/Z: 45/24/70 m/min Slide travel X1/Y1605 / 105 mm Turning/milling spindle HSK 63A Max. spindle speed: 12,000 rpm Codpfx Aew Tarfebxjrf B axis Swivel range B1: 120° Resolution: 0.001° Tool magazine Number of tools: 40 Tool length / Max. quantity: 350/40 mm

Condition: ready for operation (used), Year of construction: 2007, operating hours: 32,700 h, functionality: fully functional, travel distance X-axis: 165 mm, rotational speed (max.): 5,000 rpm, bar passage: 65 mm, controller model: SIEMENS 840 D, Equipment: chip conveyor, TECHNICAL DETAILS X1 travel: 165 mm Z1 travel: 220 mm X2 travel: 165 mm Z2 travel: 150 mm X3 travel: 165 mm Z3 travel: 650 mm Y3 travel: 80 (+50/-30) mm Bar capacity: 65 mm Main and sub-spindle speed: 5,000 rpm Turrets: 3, each with 12 stations (all driven) Driven tool speed: 4,000 rpm Codpoymmdbofx Abxorf Tool holder: VDI 30 with drive, DIN 5480 MACHINE DETAILS Control: SIEMENS 840 D Operating hours Power-on hours: 52,511 h Spindle hours: 32,700 h EQUIPMENT C-axis Y-axis Coolant system Chip conveyor Bar feeder TOP Automazioni XF 375

Condition: good (used), Year of construction: 2006, Control unit MANUAL PLUS 4110 Crsdpfx Asx Tg T Rebxsf

Condition: new, Year of construction: 2025, Gildemeister 20, completely rebuilt to like-new condition Credpfxjfzk S Dj Abxjf - AC motor for production time control - AC motor for threading - GM-type, soundproofed housing - Frequency converter for programming spindle speed - 20 mm, 25 mm, 28 mm bar passage with integrated loader - Optional: CNC cross slides for X and Z axes, CNC pick-up with CNC recovery slide - CE marking

Condition: good (used), Year of construction: 2000, Lot of boring tools for boring mills Manufactured by Gildemeister-Microbore - Komet Cjdpfewd Tkkex Abxerf Spindle mount ISO-BT 50 MK 5 In good condition.

Condition: used, Year of construction: 2000, Turret 1 - facing/length turning 155/280 mm Turret 2 - facing/length turning 82/120 mm Spindle bore (main spindle) 79 mm ((w/collet chuck 65 mm) Spindle bore (sub spindele 65 mm (w/collet chuck 42 mm) Spindle speeds (25-5000 rpm (main spindle) C-axis - 5000 rpm. Turret w/8 stations Control: Siemens Sinumerik 840 C Codpfoy Hppzox Abxjrf Equipped with: Magazine bar feeder Manuf. Simag model 65.1 - 3200 mm - built 2000 Chip conveyor Various tool holders

Condition: like new (used), Year of construction: 2009, operating hours: 26,000 h, travel distance X-axis: 725 mm, travel distance Y-axis: 50 mm, travel distance Z-axis: 300 mm, spindle motor power: 11 W, spindle speed (min.): 5,000 rpm, total length: 3,171 mm, total height: 2,648 mm, total width: 4,254 mm, overall weight: 6,000 kg, CNC controller: SIEMENS SINUMERIK 840D-ERGOLINE Capacity X-axis travel mm: 725 Y-axis travel mm: ± 50 Z-axis travel mm: 300 Turning length mm: 160 Max. turning diameter mm: ø: 250 Swing over bed mm: ø: 320 Tool magazine Crsdpfoxf Hlbsx Abxof Magazine places: 16 Tool holder: VDI-30 Tool length max. mm: 390 Tool diameter max. mm: 140 Lower turret Number of tool slots St .: 12 Speed driven tools RPM: 4.000 Drive power driven tools kW: 11,7 Milling function: Yes Main spindle Speed spindle rpm: 5.000 Drive power spindle kW: 11,7 (40% ED) Maximun torque Nm: 280 / 360 (100% / 40% ED) Coolant system Tank capacity liter: 980 L High-pressure bar: 8 / 20 Equipment Chip conveyor CE conformity Coolant gun Air blast / coolant switch-over Internal coolant supply Paper band filter Automatic workpiece magazine loader - 16 positions x ø 220 Working time hours Under power: 38.000 Cutting Time: 26.000 Basic machine dimensions / weight Length mm: 3.171 Width mm: 4.254 Height mm: 2.648 Weight kg: 6.000