Used Glass Chamber for sale (5,514)

Year of construction: 2012, condition: used, Flat glass tempering furnace Glaston (Tamglass), model FC500 Condition – working, as it is. Size – 2800x6000mm Roller pitch – 120 mm Glass thickness – 4…19mm Working power – 1600 kW Installed power – 2170 kW Year – 2012 The furnace is in perfect condition. It is suite for clear glass tempering, printing glass and low-e glass. Ffsdpfx Aoi Hgplsg Rst

Condition: used, This listing is for an Eppendorf BioFlo 320 Glass Vessel Bioreactor 5L SS Dished Bottom M1379-1001 The unit is in full working condition and is ready for immediate release Key Features Material: Autoclavable borosilicate glass vessel with a stainless steel headplate. Bottom Design: Dished stainless steel bottom for rapid heat transfer. Drive Options: Compatible with both magnetic and direct overhead drive systems. Impeller Options: Supports various impellers including Rushton, pitched blade, marine blade, spin filter, cell lift, and packed-bed impellers. Port Configuration: Multiple industry-standard headplate ports for flexibility in process design. Temperature Control: Suitable for both rapid and gentle temperature control processes.​ Applications This bioreactor is ideal for applications such as:​ Cell culture and microbiology research. Laboratory and pilot-scale fermentation of aerobic and anaerobic bacteria, yeasts, and fungi. Cultivation of mammalian, insect, and human cell lines. Specialized applications like stem cell culture or biofuel/biopolymer development. Packed-bed impeller use for vaccine production in anchorage and non-anchorage dependent cell lines. Ffedpfexv D Ihex Ag Rjt Suitable for batch, fed-batch, and continuous processes. Validation packages available for GMP-regulated processes

Condition: used, mileage: 2,01,500 km, first registration: 12/2009, fuel type: diesel, fuel: diesel, Year of construction: 2009, FORD Transit 2.5 TDI GLASS TRANSPORT TRUCK BOX VAN HIGH ROOF FULL AIR SUSPENSION TREND • Full air suspension: separate electric and pneumatic for the front and rear axles • Power: 103 kW / 140 HP • Emissions standard: EURO 4 • Green environmental sticker • 6-speed manual transmission • Cruise control • ESP - deactivatable • Side air suspension Sliding door • Rearview camera • Automatic lights • Headlight range control • Multifunction steering wheel • Driver and passenger airbags • Large radio • Electric mirrors • Electric rear view mirrors • Central locking • Tires: 215/75 R16C • Approx. 8 mm tread depth • Vehicle exterior dimensions: 5,230 x 1,970 x 2,380 mm (LxWxH) • Cargo area dimensions: • 2,870 x 1,750 x 1,640 mm (LxWxH) • Weight: 3,500 kg • Unladen weight: 2,030 kg Installation/Installation: Ffodpfjwmn T Esx Ag Rot • HEGLA - GLASTRANSPORT - Body TYPE S 28.5/24 • 350 kg load capacity of the side glass frame • Interior fittings: Glass frames on the right and left - MOT: new! - German vehicle! - Fully serviced! Subject to errors and prior sale!

Condition: used, mileage: 1,85,000 km, power: 110 kW (149.56 HP), first registration: 02/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales consultant. Attention! Preferred sale to commercial customers. Internal ID number: [2992] ---- Vehicle Highlights: * 19% VAT deductible * German vehicle * Regularly serviced * Euro 6 standard * Maxi High & Long (L3-H2) * Glass transport rack (available without rack upon request) * Large multimedia screen * Air conditioning * Trailer hitch (3,000 kg) * Cruise control Fodpfxox Amr Ne Ag Roft * Reversing camera * Cargo area wood-lined * etc... ---- Leasing or financing required? We offer attractive options – possible even without a down payment! Feel free to contact us. ---- Contact: Phone: E-mail: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ---- Note: All information on the internet is for guidance only and serves merely as a general vehicle description. Errors, typing mistakes, and prior sale excepted. The binding specifications of the vehicle are determined exclusively in the local sales contract or by written assurances. Vehicles with a mileage over 50,000 km or older than 3 years are preferably sold to our commercial customers.

Year of construction: 2013, condition: good (used), functionality: fully functional, working width: 2,300 mm, Equipment: documentation/manual, GTA, Standard Line, 2300 mm (Low-E) Horizontal glass washer-dryer Fjdpjwplgbofx Ag Reft Manufacturer: Glastechnik-Anlagenbau, Germany Year of construction: 2013/2014 6 brushes, diameter: 160 mm Working width: 2300 mm Glass thickness: 2 - 19 mm Minimum glass size: 260 x 150 mm Feed speed: 2 - 8 m/min. Electrical connection: 400/230 V, 50 Hz, 35.5 kW In good working condition. Disassembled and ready for transport.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 600, overall weight: 90 kg, load capacity: 600 kg, maximum load weight: 600 kg, fuel type: electric, gearing type: other, color: other, operation weight: 600 kg, GLASS SYSTEM DS600 VACUUM LIFTER Vacuum lifter for window installation, glass handling, and skylight transport. Configurable for handling curved glass panes, e.g. for buses, vehicles, and trains. Lifting capacity: 600 kg Control: Radio remote Power supply: Battery (up to 12 hours of operation) Battery charge indicator: Yes Vertical-horizontal tilt: Yes Rotation around its own axis: Yes Number of suction cups: 8 Number of extension arms: 4 Capable of lifting HST panes: Yes Material dimensions: min 0.9 x 0.9 m / max 5 x 5 m Number of vacuum circuits: 2 Possibility to equip with rotation actuator: Yes (at additional cost) Device weight: 90 kg For more glass handling equipment, please contact us. Ffjdowuritjpfx Ag Rot

Condition: used, Manufacturer: DEMAK Housing size: 6600 x 2100 mm Maximum temperature: 200 °C Fsdpfsvgy Ivjx Ag Reft In the past, the oven was part of a plant and the product was transported via a conveyor belt, The oven was previously controlled by PLC, it was dismantled,

Condition: used, This listing is for a EuroClone Optichrome evaporation chamber, Optichrome® is a controlled evaporation chamber with automatic control of temperature and humidity for optimized chromosome preparations Ffedsxzh Ivepfx Ag Rst

Condition: like new (used), Year of construction: 2015, functionality: fully functional, LAMINATED GLASS ASSEMBLY LINE Designed to produce laminated glass panels with maximum glass dimensions of 6000 mm × 2800 mm. This section includes all the equipment necessary for the Ffjdpfxsx H Ivme Ag Ret washing, assembly, heating, and pressing phases of laminated glass production

Condition: used, mileage: 1,85,000 km, power: 110 kW (149.56 HP), first registration: 02/2017, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 6,000 mm, Equipment: ABS, air conditioning, central locking, navigation system, soot filter, Now chat via WhatsApp: Quick & easy contact with our sales advisor. Attention! Sale preferably to commercial customers* Internal ID Number: [2992] ----Vehicle Highlights: * 19% VAT deductible * German vehicle * Regularly serviced * Euro 6 standard Fjdjx Amr Aepfx Ag Rsft * Maxi high roof & long wheelbase (L3-H2) * Glass transporter frame (removable upon request) * Large multimedia display * Air conditioning * Tow bar (3,000 kg) * Cruise control * Rear view camera * Load compartment with wooden lining * and more… ---- Leasing or financing required? We offer attractive terms – also possible without down payment! Please feel free to contact us. ---- Contact: Phone: Email: Location: Nutzfahrzeuge West GmbH Rudolf-Diesel-Str. 2 45711 Datteln – Germany Opening hours: Mon–Fri: 9:00 am – 6:00 pm Sat: 9:00 am – 2:00 pm ----Notice: All information provided online is non-binding and serves as a general description of the vehicle only. Errors, mistakes, and prior sale reserved. The binding condition of the vehicle is determined exclusively by the purchase agreement on site or by written confirmation. Vehicles with a mileage over 50,000 km or older than 3 years are primarily sold to our business customers.

Condition: excellent (used), CTS CW‑60/11 – Water-Cooled Climatic Test Chamber The CW‑60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description: This climatic test chamber allows you to evaluate the functionality or material properties of your test items under varying temperature and humidity conditions. Efficient air circulation with a high recirculation rate ensures optimal climatic transfer to the test specimens. The air treatment chamber is located at the rear of the interior space. Equipment assemblies are installed in a separate frame behind the unit, providing easy access. The control system is housed in a separate control cabinet, with the operating panel integrated into the cabinet door. For dehumidification, the test chamber features a self-regenerating compressed air dryer. A fan can be used to flush the test chamber with fresh air. Technical Specifications: Temperature Tests: Fjdpfx Agjx Anipe Rjft - Temperature range: –60 °C to +90 °C - Temporal temperature deviation: ±0.5 to 1 K - Spatial temperature deviation: ±1 K at 200 mm from wall - Rate of temperature change (supply air, linear): - Heating: 2 K/min from –40 °C to +85 °C - Cooling: 2 K/min from +85 °C to –40 °C Climatic Tests: - Temperature range: +10 °C to +95 °C - Humidity range: 10 % to 95 % RH - Dew point range: +5 °C to +89 °C - Temporal temperature deviation: ±0.5 K - Temporal humidity deviation: ±2 – ±5 % RH - Without heat radiation - In steady-state conditions All technical data refer to an ambient temperature of +25 °C, rated voltage of 400 V, without test specimens, no thermal radiation, and without additional equipment. Dimensions: Internal (test chamber/usable space): - Volume: approx. 11,000 liters (11 m³) - Internal dimensions (approx.): Width: 2100 mm, Depth: 2530 mm, Height: 2200 mm (may vary slightly by configuration) External dimensions: Width: 2700 mm, Depth: 5200 mm, Height: 2520 mm (depending on door, frame, accessories, etc.) Operating Data: - Rated power: 84.4 kW - Rated voltage: 400 V 3/N 50 Hz - Rated current: 131.4 A Technical Design: - Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless capacity control via electronic monitoring and control system, eco-friendly refrigerants R 23 / R 404 A Weight: 6000 kg Notes: - Viewing by appointment (46325 Borken) - Shipping by freight carrier possible; costs & arrangement upon request - Delivery scope: (see photo) - (Subject to change and error in technical specifications—information provided without obligation.) - For further questions, please contact us by phone.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 7,100 mm, total width: 2,300 mm, total height: 3,270 mm, input voltage: 400 V, working height: 800 mm, overall weight: 2,300 kg, input current: 40 A, input frequency: 50 Hz, power: 16 kW (21.75 HP), Equipment: documentation/manual, Perfectly working machine. Fjdpox Dl U Ejfx Ag Rsft

Condition: good (used), Internal dimensions: 600 x 600 x 600 mm Max. Temperature 70°C Fedpfsh Eilvjx Ag Rsft

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 050155-1, Glass cutting table by Bystronic, model SMFR. Technical specifications can be found in the photos below. Full technical documentation available. Fodpfx Agox Ekvme Reft

Year of construction: 2025, condition: new, functionality: fully functional, ELECTRONIC VERTICAL DRILLING MACHINE FOR GLASS MODEL: PRIAM MANUFACTURED IN 2025/ BRAND NEW Priam model is a two-spindle (double-sided) vertical glass drilling machine. It is designed for customers looking for a functional and easy-to-use machine that is also durable. When designing it, we went back to the old school of machine construction – on heavy, heat-treated steel bodies with mechanical solutions for subsequent easier operation and servicing. With this different approach to design and manufacturing, our machine ensures many years of trouble-free glass drilling, providing a multiple return on investment. To make sure that the components of our drill are made with due care, we manufacture them in Poland using local contractors. The main body is made on site, by our company, and then heat treated and processed further in local areas. This ensures that all production is carried out under our careful supervision, and any imperfections can be detected and corrected before the product reaches the customer. This ultimately also supports the local machinery industry. The product’s components are at the highest European level. Our suppliers include SIEMENS, HITACHI, UNITRONICS,SCHNEIDER,GARLOCK Mechanical components are accessible, while in-service replacement is simple and quick. The Expoglass Priam drill - functionality at the highest level: ⦁ 2 spindles (front and back) – allowing to drill the pane in a single pass – without turning it ⦁ Electronically controlled loading bar – in order to set the size of the bottom edge of the glass from the hole, you just need to enter the required size on the touch screen and the machine will automatically adjust to the right position ⦁ Quick drilling bit change mode – after pressing the drill bit change button, both spindles are automatically locked (they cannot be turned), the vertical table, located between both drilling bit, slides down – thus opening a large space between them. This means that the drill bits can be unscrewed without the use of a wrench, and there is plenty of space to perform this operation comfortably. Fedogq Dl Aepfx Ag Rsft ⦁ Automatic (electronic) measurement of the drill bits length and position – after the drill bits have been changed, the machine automatically calibrates them, measuring their length so that it knows the distance between the glass and the drilling end of each bit – very important in small plants where there are no series, but most of the holes are made individually ⦁ Automatic (electronic) calculation of spindle cavity depth – after automatic calibration of spindles, the machine measures the thickness of drilled glass by itself, by pressing the glass, and then selects the perfect values of cavities on its own. The operator's only task is to click the "drill" button, the process is completely automatic ⦁ Electronically controlled feed of the spindles – significantly increases machine capabilities, in addition to enabling the operation of most of the foregoing functionalities, it also makes the feed values perfectly adaptable to any situation and changeable with just a few clicks on the screen. This is illustrated, for example, by the fact that e.g. after drilling a 15 mm piece of glass, you take 10 seconds to change the settings, you can immediately drill a 2 mm glass pane without fear of cracking or chipping. And all this without the experience and "intuition" of the operator

Condition: excellent (used), Year of construction: 2002, operating hours: 50,000 h, functionality: fully functional, type of input current: three-phase, The machine is fully operational, in excellent condition, ready for collection in Wrocław. Ffedpfox Ewzpsx Ag Rot

Condition: excellent (used), Weiss Model: WK3 600/0-M Weiss Climate Test Chamber, Water-Cooled Series: WK3-../0 with SIMPAC* Controller Test chamber volume: approx. 600 liters Test chamber dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External dimensions: Height 1995 mm, Width 1090 mm, Depth 1660 mm Operating data: Test chamber lighting: LED 24 V, 6.8 W / Halogen bulb 2 x 24V, 50W Rated voltage: 1/N / PE AC 230 V ±10% 50 Hz Rated power: 2.3 kW Rated current: 10 A Site-provided fuse: 16 A slow-blow Control cabinet and operator panel protection class: IP 54 Maximum heat emission to environment: 1200 W Sound pressure level: Measured at a distance of 1m from the front, at a height of 1.6m: 46 dB(A) Data for temperature tests: Fjdpfxsx Ag R So Ag Rsft Temperature range: -5°C to +90°C Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temperature gradient (according to IEC 60068-3-5) Temperature change rate: Heating 0.6 K/min Cooling 0.3 K/min Heat compensation at +20°C to +50°C: 200 W Data for climatic tests: Temperature range: +10°C to +90°C Dew point range: 4 to +89.5°C Humidity range: 10 to 98 % r.h. Temporal temperature deviation at center of usable space: ± 0.1 to ± 0.3 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity deviation: +1 to +3 % r.h. Refrigerant: R-404A Weight: 610 kg For your safety as a buyer, please note the following information! The following points are carried out in advance on our offered chambers: 1. Functionality check and replacement of necessary components 2. Refilling with legally compliant refrigerant 3. After successful inspection, the chambers are subjected to a test run, which is monitored with calibrated equipment. Condition: used Scope of delivery: (See image) (Technical data and information subject to change and errors!) We are happy to answer any further questions you may have by phone.

Condition: ready for operation (used), A small Striffler glazing bead saw is available. Cutting speed: 36m/s, working length: 2400mm, miter setting: 45°, max. cutting width: 75mm, max. cutting height: 50mm, saw blade dimensions X/Y: 250mm/220mm, weight: approx. 100kg. An on-site inspection is possible. Ffodpfsx Ih Dyex Ag Ret

Year of construction: 2023, condition: as good as new (ex-display), 2 units new in stock, new machine warranty, warehouse stock, original packaging, available immediately With safety system for solvent-based substances according to DIN 1539. Matching loading trolleys in stock (see image). Contact us for more information! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Tmax: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for controller: data recording via USB stick - Air circulation: 3600 m³/h - Exhaust air volume: 390 m³/h - Additional features: drive-in rails - Connected load: 39 kW - Net weight: 1150 kg - Incl. documentation, CE declaration We are happy to offer installation and commissioning services. Inspection in our warehouse possible by appointment. We offer new and used industrial ovens. Contact us for more information! Fsdpfel Dw T Aox Ag Reft Oven, ovens, drying oven, kiln, heat oven, heating cabinet, industrial oven, annealing oven, heating oven, tempering oven, drying cabinet, chamber furnace, curing oven, convection drying cabinet, convection oven, solvent oven, chamber dryer

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A Ffodpfx Agsx Ig Tme Rjt - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Condition: new, Year of construction: 2025, functionality: fully functional, number of drawers: 8, The subject of sale is a warehouse for storing glass panes (160 cm x 255 cm) in boxes (8 x 2500 kg): glass, quartz sinters, polycarbonate, furniture boards, stone or other board materials. Ffsdpogfm I Eofx Ag Ret The magazine is in the form of sliding, slightly inclined drawers. Thanks to it, you can save up to 75% of space, because all the drawers are parallel to each other and separated by only 10 millimeters. We offer various dimensions and capacity versions, while after consultation, we are also able to produce a warehouse with various parameters, taking into account your individual conditions and wishes. The magazine is especially recommended for glass, stone, furniture and advertising companies, which care about the effective use of their space.

Condition: used, El. heated chamber oven Nabertherm Type: N 500 / 45 HA Air flow: horizontal Temperature: max. 450°C Connected load: 28 kW Ffodpfx Aoxmhhaog Ret Clear dimensions (W x D x H): approx.790 x 1000 x 760 mm

Condition: excellent (used), Weiss Type: SWT 1000 – IPX9K Weiss Spray and Splash Water Test Chamber Description: Offered for sale is a WaterEvent SWT 1000 test chamber from Weiss Technik – ideal for standardized testing of enclosure or component water ingress protection (IP) classes. With optional features, testing according to IPX9K (high-pressure/steam jet), ISO 20653, and additional standards is possible. High-pressure/steam jet nozzles for IPX9K Jet nozzles for IPX5/6, among others, compliant with standards: ISO 20653, DIN EN 60529, SAE J 575, JIS D 0203, MIL-STD 810, EN 60068-2-18, IEC 60598-1. Possible Protection Classes & Tests Depending on configuration, the SWT system covers a wide range of tests: Standard configuration: IPX3 / IPX4 tests (spraying and splashing water from all directions). Optionally: Higher protection classes up to IPX5 / IPX6 (jetting water), and – with corresponding high-pressure configuration – up to IPX9 and IPX9K. Tests are based on standards such as DIN EN 60529 (for IP protection levels) and ISO 20653 (e.g. for vehicle or outdoor applications) – depending on intended use. Typical Applications Typical application scenarios for such a test chamber include: • Electronic devices or enclosures intended for outdoor use or humid environments, such as outdoor lighting, control housing, assemblies, panels. • Components for vehicles or machines, especially those exposed to rain, splashing water, or high-pressure cleaning (e.g., construction machinery, e-bike or vehicle parts). • Batteries or electrical components requiring water ingress protection testing – e.g., automotive industry or e-mobility applications. Technical Data: Applicable protection classes: IPX3 / IPX4 Ffodpfx Asxzprcog Rot Oscillating tube radius (for IPX3/4 tests): standard 200 mm (for SWT 1000), optionally up to 400 mm. Test chamber (interior): Internal dimensions: approx. 1,000 × 1,015 × 1,000 mm (W × H × D) Operation / Control: Web panel or GUI for test programming and control. Condition: used Scope of supply: (see photo) (Data subject to change and correction. Technical specifications may be updated without notice.) Further questions welcomed by phone.

Condition: new, Year of construction: 2025, Recirculating chamber furnace, electric, new device, delivery time 12 weeks - Temperature: 250°C - Internal dimensions (W x D x H): 1500 x 3000 x 2000 mm - External dimensions (W x D x H): 2410 x 3560 x 2730 mm - Volume: 9,000 liters - Controller: Eurotherm Nanodac, 100 programs with 25 segments each An additional 100 programs can be stored/loaded via FTP or a USB flash drive - 2 pcs circulating air fans - Double doors with safety door sensors - Over-temperature protection, Eurotherm 3216i - Control/recorder with color touchscreen display - Robust steel construction, exterior in anthracite - Motorized dampers - Electrical specification: 400 V / 50 Hz / 3NPE - Increased heating capacity approx. 70 kW - Recess for trolley loading - Documentation, CE Declaration of Conformity - Electrical schematic with spare parts list We are happy to offer transport, on-site installation, and staff training upon request. Ffodpfxslkb Ezj Ag Rjt Also available as a new unit with exhaust fan and alternative configurations! Delivery time approx. 10 - 12 weeks. Please contact us! We offer new and used industrial furnaces, which we can also retrofit or customize according to your requirements. Inspection in our machine hall possible at any time by appointment. Furnace, ovens, drying oven, industrial furnace, drying cabinet, heat oven, heating cabinet, recirculating air oven, chamber furnace, heating chamber oven, chamber recirculation oven, annealing furnace, tempering oven

Condition: good (used), Vötsch Model: VTS 7048-1 Heraeus Vötsch Temperature Test Chamber, Water-Cooled Performance Data: With a temperature change rate of 10 K/min Test chamber internal dimensions: height 950 mm, width 800 mm, depth 650 mm External dimensions: height 2025 mm, width 1000 mm, depth 2480 mm Temperature range: -70°C to +180°C Temporal temperature deviation: ±0.3 to ±0.8 Spatial temperature uniformity: ±0.5 to ±2 Temperature change rate (cooling): 10 K/min Temperature change rate (heating): 10 K/min Heat compensation at -20°C: 8,000 W Heat compensation at +20°C: 8,000 W Test volume: 480 liters Left: 1x side port, ∅ 125 mm Left: 1x side port, ∅ 50 mm Right: 1x side port, ∅ 125 mm Chamber is water-cooled Test chamber illumination: Halogen bulb: 24 V, 50 W Electrical connection: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 17 kW Rated current: 30 A Refrigerant: R-404A / R-23 Fsdpsxzgn Iofx Ag Rjft Weight: approx. 1,250 kg Important information for your safety as a buyer! The following steps are carried out in advance on our offered chambers: 1. Function check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (see image) (Specifications are subject to change and errors excepted!) For further questions, feel free to contact us by phone.