Used Glazing Bead Saw for sale (8,652)

Condition: used, Year of construction: 2004, functionality: fully functional, Glazing bead saw manual, for 45° miter cuts, 2 pneumatic clamps with foot valve. Control "N". Manual saw feeding Pneumatic work piece clamping Adjustable table height Adjustable table height 2 x 45° motors 2 HM Saw blade 200 x 2.2 x 30mm 2 HM Saw blades 103 x 2.0 x 30mm Variable measuring stick 1.5m Nledpfx Aoxytpijbyei Variable measuring stick 3.0m

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Nljdpoxnlgcofx Abyji Storage location: Garbsen

Condition: ready for operation (used), The OMG TRF 527 NC is a compact, precise double miter saw, ideally suited for applications demanding high dimensional accuracy and repeatability. Features and Specifications: - Two saw blades Ø 220 mm, driven by powerful 1.5 HP (1.18 kW) motors - Fixed right saw unit; left saw unit adjustable via NC control through an intuitive 7" touchscreen - Smooth-running ball bearing guide for the adjustable unit - Simultaneous cutting of two profiles stacked on top of each other - Pneumatic front hold-down clamps for secure positioning during cutting - Adjustable cutting angles for precise miter cuts Optional equipment: increased cutting length (up to 4,000 mm), angle stop for quick setting of cutting angles Technical Data (excerpt): - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm (also at 45°) - Cutting capacity at 90°: 55 mm - Cutting capacity at 45°: 40 mm Nsdpfx Abexvqvleyoli - Max. cutting height: 40 mm - Spindle speed: 5,000 rpm - Extraction ports: 2 x Ø 80 mm - Packing weight: approx. 230 kg - Packed dimensions (L x W x H): approx. 3,345 x 600 x 1,400 mm The OMG TRF 527 NC impresses with its compact design, high cutting precision, and user-friendly control system – ideal for operations requiring exceptional repeatability with small to medium workpiece dimensions. The machine is available for inspection at any time. Shipping available.

Year of construction: 2022, condition: like new (used), Circular Saw OMRM 105 Technical Specifications: • Automatic cutting of PVC profiles for glazing beads at 45° • 4 cutting saw blades Nedpfx Abow D Dq Ueysli • Vertical pneumatic clamping system • Adjustment handle for easy mould adaptation • Double cutting of glazing bead at 45° in one single operation • Adjustable cutting speed via regulator on the control panel • Standard equipment includes feeding and measuring conveyors (2.5 m + 2.4 m)

Condition: as good as new (ex-display), Year of construction: 2024, Pneumatic Glazing Bead Saw Type GLSP-200N-AV Pneumatic Automatic saw feeding Pneumatic work piece clamping Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 32mm HSS Saw blade 103 x 2.0 x 32mm Z=60/45° Right HSS Saw blades 103 x 2.0 x 32mm Z=60/45° Left Nedpfx Ajuydgjbysli Glazing Bead Simulation- System With feed cylinder, 1 Revolver stop with 16 stops and 4 clamping cylinders Fixtures for 2 Glazing Beads, support And leg adjustable for simulation Exhaust support D=80mm

Condition: used, Year of construction: 1997, machine/vehicle number: 971845, input voltage: 400 V, Machine in the condition shown in the photo, removed from production, operational. Njdpfx Abew Ixn Uoyoli

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 403 6274, overall weight: 297 kg, Dimensions: Machine width: approx. 700 mm Machine depth: approx. 1,350 mm Machine height: approx. 1,250 mm Weight: approx. 250 kg Cutting angle 45 degrees Tools used: All milling and cutting tools must meet the DIN EN 847-1 standard and have an appropriate working speed to the speed of the milling cutter motors. Milling cutter: Ø 150x30x3.0 32 teeth Cutting disc: Ø 300x30x2.6 96 teeth GLA 403 USER MANUAL Copyright  by FM ROTOX Sp. z o. o. Page: 14 Processed material: PVC glazing beads: Profile length: min. 200mm (depending on the length bumper) Profile height: min. 5mm max. 50mm Profile width: min. 10mm max. 50mm Tool pressure: Pneumatic Electrical part: Electrical connection: 400V, 50Hz (AC) Power consumption: 2.2kW Fuse: 16A (slow) Saw motors: 230/400V; 4.0/2.3A 1.1kW; 50Hz; 2860 1/min Pneumatics: Working pressure: 5-6 bar Limit pressure: min. 5 bar (also during operation) max. 6 bar Air consumption: approx. 15 l/min / saw run-up Nedpfx Abjwhpp Royeli Tip: NW Ø 9mm Permitted temperature during operation: min. 15°C and max. 40°C

Year of construction: 1992, condition: used, Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine Nlsdpfxeif Azfs Abyji -Manufacturer: Alfred E.Gohl, glass bead saw type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW -Speed: 3000 rpm -Dimensions: 1100/650/H1350 mm -Weight: 152 kg

Condition: ready for operation (used), Technical characteristics Double loading Advance by pneumatical tightening 2 motors Nledpfeundguox Abysi Double blade : 250 and 175 mm Tables Power and Motors Voltage: 380 V Pluging: Three-phased Power: 3,5 Kw Overall dimensions

Year of construction: 2018, condition: as good as new (ex-display), Glazing Bead Saw GLSM-200E Manual saw feeding Pneumatic work piece clamping (4) Adjustable table height Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 30mm Nljdpfxouxxxj Abyoi HM Saw blades 103 x 2.0 x 30mm Z=60/45° Left HM Saw blades 103 x 2.1 x 30mm Z=60/45° right Variable measuring stick 1.5m Variable measuring stick 3.0m Support for measuring stops 3.0m

Condition: new, Number of motors 2 Stück 0 2650 mm Control manuell Ruchser RU-GLS-ED 45° glazing bead saw ----- Developed for cutting glazing beads in pairs The RU-GLS-ED45° double glazing bead saw can be adjusted manually to size. The Machine was designed for cutting glazing beads in pairs with one Cutting angle of 45° developed and has a fixed and a movable saw unit. The manual length adjustment is equipped with an electric digital display. Cutting lengths of 150 mm - 2650 mm can be achieved be sawn. During the cutting process, the glazing beads are with a pneumatic tensioning device from above and from the front to prevent tipping of the glazing beads. It is operated via a safety Two-hand operation. Saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V Pos. 1: RU-GLS-ED45° double glazing bead saw ----- with manual measurement adjustment, for pairs Cutting glazing beads, cutting angle 45°. Manual length adjustment with electric Digital display, cutting length from 150 - 2650 mm. Pneumatic clamping device from above and from in front. Safety two-hand operation, saw blade diameter 250 mm, length 3700 mm, width 700 mm, Voltage 400V ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.2 Recording device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Additional price: 611.00 euros Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 478.00 euros Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 428.00 euros Pos. 1.5 Operating time switching device for independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: 702.00 euros Item 1.6 1 set of carbide saw blades RU-GLS-P45 and RU-GLS-ED45° D = 250 mm x 3.2/2.2 x 30, 80 teeth, each consisting of 1 piece of saw blade L6444(right) and L6443, (left), with special grinding 43°. Additional price: 576.00 euros ----- All prices in euros, net, plus statutory. VAT (technical information according to the manufacturer, without guarantee!) Njdpfjxmk Dqox Abysli

Condition: good (used), Year of construction: 1989, Number of motors 1 Stück 450-2400 mm Control manuell Nlodpfx Aovnwctjbyoi

Condition: new, Number of motors 2 Stück 0 2380 mm Control , RUCHSER RU-GL-45° ----- Glass bead saw on the sliding work table Developed for cutting glazing beads in pairs on the sliding work table The RU-GL glazing bead saw is mounted on a sliding work table Scanning and clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage Manually movable mounted. Pneumatic clamping device from above and from Nledpfxexmkz Nj Abyoi the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, Width 1400 mm, working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. Pos. 1: RU-GL double glazing bead saw 45° on RU-SA-3000 ----- for glazing beads up to 30 x 70 mm (W x H)!!!, Mounted on the sliding work table with scanning and Clamping device for two glazing beads. Cutting length min. 230 mm, max. 2380 mm. Left saw fixed, right saw on carriage manually mounted movably. Pneumatic clamping device from above and from the side, safety two-hand operation. Saw motors 0.37 kW, voltage 400V. Sliding work table with felt pad, length with side shelf 3300 mm, width 1400 mm, Working height 800 - 1000 mm. Pneumatically lowerable Counter bearing for positioning the wings. ----- Basic price in the above version: on request! ----- Ex works. Plus packaging and shipping as well as current Material cost surcharge of 6% of the total price Options with additional costs: ----- Item 1.1 1 set of carbide saw blades for for glazing bead saw RU-GL D = 200 mm, 64 teeth, consisting of 1 piece each Saw blade L1233 (left) and L1085 (right), with special grinding 43°. Additional price: 421.00 euros Pos. 1.2 Holding device for scanning gauge RU-GL for transferring the scanning dimensions to the saw with pneumatic installation. Additional price: 611.00 euros Pos. 1.3 Measuring gauge for glazing beads, total length 2550 mm, max. scanning length approx. 2450 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing beads Additional price: 478.00 euros Pos. 1.4 Measuring gauge for glazing beads, total length 1500 mm, max. scanning length approx. 1430 mm Measuring gauge made of square profile with 2 fixed and 2 adjustable cams for measuring the length of the glazing bead Additional price: 428.00 euros Item 1.5 Set of inserts for rebated glazing beads for RU-GLS-P45° and RU-GLS-ED45° Price request, after checking the glazing beads. Depending on the number of glazing beads used, this can happen several sets of inserts are required. To determine the exact number In order to be able to do this, we need profile drawings before order confirmation the glazing beads to be used. Additional charge: on request, after sending your glazing bead drawings Pos. 1.6 Operating time switching device for independent suction. Adjustable from 5 seconds. up to 3 hours. With every sawing process automatically becomes the set time sucked off. Will be used again within the suction time sawn, the set suction time begins again from the beginning. Additional price: 702.00 euros ----- Total price i...

Condition: used, Year of construction: 2017, Number of motors 2x 1.2 kW Stück 0 2800 mm Control ja 0 OMGA Double Glazing Bead Saw Model TRF 527 NC CE ----- Sold on behalf of the customer from the customer's location. The machine was in use until closing and is now at the customer's warehouse. Technical manufacturer's description: Double miter saw for cutting two glazing beads simultaneously. The right saw unit is fixed; the left unit is adjusted via the positioning control. Features of the positioning control: - Monochromatic graphic display 240 x 64 pixels - Display of 30 characters on 8 lines - Keypad with 28 function keys - FN key for interrupting the function - Diagnostics and error messages - Language selection: Italian, German, British, Spanish, French, and Swiss - 10,000 memory lines divisible into 999 cycles, max. 99 lines per cycle - RS-232 interface - Dimensions can be entered manually or via USB interface - 3 correction values ??each for the left and right saw units - 1 correction value for counter profiles The adjustable unit is equipped with recirculating ball bushings and runs on steel-hardened axes. Both units have supports that allow the simultaneous cutting of two glazing beads. For cutting larger cross-sections, the upper support can be removed. After the cutting process is complete, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. Nsdpfx Aboxmamneyeli Machine features: - Fixed right-hand saw unit - Pivoting clamping device - Positioning control for TRF 527 NC CE - Maintenance unit - Center support - 220 mm Ø carbide-tipped saw blades - Two-hand control - Intermediate support for simultaneous sawing of two glazing beads - Pneumatic saw unit lift - Motor protection switch - Pressure switch - Undervoltage release - Overload switch - Tool set - 2 x 4-position angle star saw holders Technical specifications: - Motor power: 2 x 1.2 kW - Saw blade diameter: 220 mm - Max. cutting height without support: 80 mm - Max. cutting width at 90 degrees: 55 mm - Max. cutting width at 45 degrees: 40 mm - Max. cutting length: 2800 mm - Min. cutting length: 158 mm - Weight 217 kg ----- Price of the above-mentioned machine upon request! ----- (Technical specifications according to the manufacturer - no guarantee!) All prices quoted are net, plus VAT.

Condition: new, Year of construction: 2025, Number of motors 2 Stück 0 3000 mm Control ja/CNC loading dimensions L x W x H 4000 x 1500 x 1500 mm Weight 800 kg HECHT double miter saw Exenso DS350E - 3000 mm ----- For wooden glass strips, rungs, profile strips, aluminum strips, etc. Pos. 1.1 Article number 942.5103 1 piece HECHT Exenso DS350E - Working length 3000 mm - Swivel range 22.5° (inside) to 135° (outside) - Right head movable - Saw blade holder Ø 350 mm - Incl. 1 piece center support. - Units clamped pneumatically. - Positioning control Exenso DS3 with touch panel 15" display in dust-proof monitor housing. - 3-axis control, 1 longitudinal axis and 2 swivel axes. - Entering the cutting data by hand - Processing data from a cutting list (data set according to specification) - Processing measuring rod data (GMF wireless caliper) - Ethernet connection 10/100 (TCP/IP) - USB interface - Incl. control cabinet, motor and software licenses. Item 1.2 Item number 723.0121 2nd DS saw blade wood Bevel/bevel/flat tooth - positive Item 1.3 Item number 942.5236 2 sets of DS workpiece clamping combined Combined workpiece clamping consisting of: Pneumatic swivel clamp - for clamping the material from above. (Free access to the work table) Pneumatic horizontal clamp - anti-twist clamping cylinder with pressure piece. The clamps can be selected individually via the saw control. The clamping sequence can also be set via the control. Including safety pre-tensioning pressure Scope of delivery for 2 sets: - 2 pieces (left/right) vertical swivel clamps. - 2 pieces (left/right) horizontal clamps. Item 1.4 Article number 942.5997 DS pneumatic feed device Item 1.5 Article number 945.2007 Packaging DS350 (transport frame) ----- Total price in this version - on request! ----- ALTERNATIVE options, prices on request! ----- For horizontal clamping of the remaining pieces with blunt glass strips instead of the 2nd set Item 1.3 943.5236 DS workpiece clamping combined! Pos. 2.1 Article number 942.5201 ES / DS workpiece clamping from the front - 2 clamping cylinders with anti-twist protection - 2 cylinder holders with clamping lever ----- For rebated glass strips, instead of standard panels without a groove: Pos. 2.2 Article number 942.5241 DS350 table supports grooved according to customer sample The assembled table supports are milled according to the customer's drawing. Please send us all profile drawings that are to be sawn (pdf, dxf and hand samples) ----- If, for example, aluminum is also to be sawn: Nlodovzt D Tspfx Abysi Item 2.3 Article number 942.5203 DS hydropneumatic feed device (instead of pneumatic feed cylinder) ----- OPTIONAL accessories, with additional charge on request: ----- Item 2.4 Article number 942.5237 DS "Excess length" software (subsequent steps must be confirmed) Sequence control including hardware. After entering a cutting dimension > max. cutting length of the system, the cutting is carried out in a cyclical manner. (Left unit cuts, right unit moves the material and cuts to size.) ----- Item 2.5 Article number 944.1023 GMF caliper 3000mm complete set (1500mm plus extension 1500mm) incl. charger and receiver. A robust aluminum measuring rail with a measuring ran...

Condition: used, Year of construction: 2018, Number of motors 1 Stück Nodpfxjvpr N Ro Abyoli 0 2500 mm Control nein Hecht ES 350 single-sided glazing bead saw ----- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!)

Condition: excellent (used), For sale is a Costa puma series cutter in excellent condition. It can be put to work immediately. It can be tested on site. I will send a video upon request. Nsdpfxexw Rhde Abyeli

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Nljdpfefv Hphox Abysi Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V Nledpob A N Aksfx Abyei -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg

Condition: used, Vesto saw with two discs for sale Nedpfxetqt T Ie Abyoli - electric motor: 2 x 7.5 kW, - complete with hydrostation, - electrical cabinet.

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Nodjwxmhljpfx Abyjli Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW Nljdpfou U Ad Rsx Abyji EPS bead storage 300 m3

Condition: excellent (used), functionality: fully functional, overall weight: 50,000 kg, total height: 5,400 mm, total width: 4,500 mm, total length: 14,000 mm, feed length X-axis: 800 mm, rotational speed (max.): 80 rpm, 80 blade gang saw with top quality of cutting easily reaching C120 surface, so no honing is required. Blade stroke: 800 mm. Nledpfx Absv D Napeyoi Blades number: 80 Blade length: 4,350 mm. Motor power: 110 kW Cycles per minute: 85 Voltage: 400v/50hz Machine weight: 54,000 Kg. Useful cutting side: 3,200 x 2,000 x h 2,000 mm. Overall dimensions: 13,600 x 4,500 x h 5,400 mm. With n.2 block trolleys. More data or pictures upon request. Machine is fully functioning and in top condition.

Condition: used, Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V Nodpfjb A N Alex Abysli -Price: per piece -Number: 180 pieces available -Weight: 0.5 kg

Condition: used, Three head band saw IDC000093 - manufacturer: Talsu - each electric motor: 11 kW - for square log cutting - with electric cabinet - hydraulic station - three head Nljdoupt Siepfx Abyji - for sawing pallet boards - feed chain - feed pushers from the top