Used Bead Saw for sale (6,615)

Condition: used, Year of construction: 2004, functionality: fully functional, Glazing bead saw manual, for 45° miter cuts, 2 pneumatic clamps with foot valve. Control "N". Manual saw feeding Pneumatic work piece clamping Adjustable table height Adjustable table height 2 x 45° motors 2 HM Saw blade 200 x 2.2 x 30mm Caodpsxytpisfx Addja 2 HM Saw blades 103 x 2.0 x 30mm Variable measuring stick 1.5m Variable measuring stick 3.0m

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Cajdpfxjxnlgce Addea Storage location: Garbsen

Condition: ready for operation (used), The OMG TRF 527 NC is a compact, precise double miter saw, ideally suited for applications demanding high dimensional accuracy and repeatability. Features and Specifications: - Two saw blades Ø 220 mm, driven by powerful 1.5 HP (1.18 kW) motors - Fixed right saw unit; left saw unit adjustable via NC control through an intuitive 7" touchscreen - Smooth-running ball bearing guide for the adjustable unit - Simultaneous cutting of two profiles stacked on top of each other - Pneumatic front hold-down clamps for secure positioning during cutting - Adjustable cutting angles for precise miter cuts Optional equipment: increased cutting length (up to 4,000 mm), angle stop for quick setting of cutting angles Technical Data (excerpt): - Max. cutting length: 2,800 mm (optionally 4,000 mm) - Min. cutting length: 158 mm (also at 45°) Cjdexvqvlopfx Addoaa - Cutting capacity at 90°: 55 mm - Cutting capacity at 45°: 40 mm - Max. cutting height: 40 mm - Spindle speed: 5,000 rpm - Extraction ports: 2 x Ø 80 mm - Packing weight: approx. 230 kg - Packed dimensions (L x W x H): approx. 3,345 x 600 x 1,400 mm The OMG TRF 527 NC impresses with its compact design, high cutting precision, and user-friendly control system – ideal for operations requiring exceptional repeatability with small to medium workpiece dimensions. The machine is available for inspection at any time. Shipping available.

Year of construction: 2022, condition: like new (used), Circular Saw OMRM 105 Technical Specifications: Cjdpfx Ajw D Dq Ueddoaa • Automatic cutting of PVC profiles for glazing beads at 45° • 4 cutting saw blades • Vertical pneumatic clamping system • Adjustment handle for easy mould adaptation • Double cutting of glazing bead at 45° in one single operation • Adjustable cutting speed via regulator on the control panel • Standard equipment includes feeding and measuring conveyors (2.5 m + 2.4 m)

Condition: as good as new (ex-display), Year of construction: 2024, Pneumatic Glazing Bead Saw Type GLSP-200N-AV Pneumatic Automatic saw feeding Cedpfouydgex Addeaa Pneumatic work piece clamping Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 32mm HSS Saw blade 103 x 2.0 x 32mm Z=60/45° Right HSS Saw blades 103 x 2.0 x 32mm Z=60/45° Left Glazing Bead Simulation- System With feed cylinder, 1 Revolver stop with 16 stops and 4 clamping cylinders Fixtures for 2 Glazing Beads, support And leg adjustable for simulation Exhaust support D=80mm

Condition: used, Year of construction: 1997, machine/vehicle number: 971845, input voltage: 400 V, Machine in the condition shown in the photo, removed from production, operational. Csdpfsw Ixn Ujx Addoaa

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 403 6274, overall weight: 297 kg, Dimensions: Machine width: approx. 700 mm Machine depth: approx. 1,350 mm Machine height: approx. 1,250 mm Weight: approx. 250 kg Cutting angle 45 degrees Tools used: All milling and cutting tools must meet the DIN EN 847-1 standard and have an appropriate working speed to the speed of the milling cutter motors. Milling cutter: Ø 150x30x3.0 32 teeth Cutting disc: Ø 300x30x2.6 96 teeth GLA 403 USER MANUAL Copyright  by FM ROTOX Sp. z o. o. Page: 14 Processed material: PVC glazing beads: Profile length: min. 200mm (depending on the length bumper) Profile height: min. 5mm max. 50mm Profile width: min. 10mm max. 50mm Tool pressure: Pneumatic Electrical part: Electrical connection: 400V, 50Hz (AC) Power consumption: 2.2kW Fuse: 16A (slow) Saw motors: 230/400V; 4.0/2.3A 1.1kW; 50Hz; 2860 1/min Codewhpp Ropfx Addoaa Pneumatics: Working pressure: 5-6 bar Limit pressure: min. 5 bar (also during operation) max. 6 bar Air consumption: approx. 15 l/min / saw run-up Tip: NW Ø 9mm Permitted temperature during operation: min. 15°C and max. 40°C

Year of construction: 1992, condition: used, Aluminum circular saw, chop saw, glazing bead saw, aluminum saw,machine -Manufacturer: Alfred E.Gohl, glass bead saw type GLS -Saw blade: Ø 225x2.0x32 mm -Drive: 1.1 kW -Speed: 3000 rpm Caodjif Azfjpfx Addsa -Dimensions: 1100/650/H1350 mm -Weight: 152 kg

Condition: ready for operation (used), Technical characteristics Double loading Advance by pneumatical tightening 2 motors Double blade : 250 and 175 mm Tables Power and Motors Voltage: 380 V Codpfx Adoundguedoaa Pluging: Three-phased Power: 3,5 Kw Overall dimensions

Year of construction: 2018, condition: as good as new (ex-display), Glazing Bead Saw GLSM-200E Manual saw feeding Pneumatic work piece clamping (4) Adjustable table height Adjustable table height 2 x 45° motors Accessories: HM Saw blade 200 x 2.2 x 30mm HM Saw blades 103 x 2.0 x 30mm Z=60/45° Left Cedouxxxspfx Addoaa HM Saw blades 103 x 2.1 x 30mm Z=60/45° right Variable measuring stick 1.5m Variable measuring stick 3.0m Support for measuring stops 3.0m

Condition: ready for operation (used), functionality: fully functional, power: 22 kW (29.91 HP), Steam boiler LOOS DF 600kg/h renovation! Csdju U Ad Rjpfx Addjaa EPS EXPANDER continuous operation 600kg/h 15g/liter electric power 22KW EPS bead storage 300 m3

Condition: excellent (used), For sale is a Costa puma series cutter in excellent condition. It can be put to work immediately. It can be tested on site. I will send a video upon request. Casdpfx Adsxw Rhdjdja

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm Csdsfv Hphepfx Addeaa angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: good (used), Contactor, semiconductor contactor, contactor Caodpfxeb A N Akj Addea -Max. 30 kW 660 V -Price: per piece -Quantity: 17 pieces available -Weight: 2 kg

Condition: used, Vesto saw with two discs for sale - electric motor: 2 x 7.5 kW, Cjdpfotqt T Iex Addsaa - complete with hydrostation, - electrical cabinet.

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Cjdpfx Aswxmhloddjaa Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: excellent (used), functionality: fully functional, overall weight: 50,000 kg, total height: 5,400 mm, total width: 4,500 mm, total length: 14,000 mm, feed length X-axis: 800 mm, rotational speed (max.): 80 rpm, 80 blade gang saw with top quality of cutting easily reaching C120 surface, so no honing is required. Blade stroke: 800 mm. Blades number: 80 Blade length: 4,350 mm. Motor power: 110 kW Cajdpfjv D Napex Addea Cycles per minute: 85 Voltage: 400v/50hz Machine weight: 54,000 Kg. Useful cutting side: 3,200 x 2,000 x h 2,000 mm. Overall dimensions: 13,600 x 4,500 x h 5,400 mm. With n.2 block trolleys. More data or pictures upon request. Machine is fully functioning and in top condition.

Condition: used, Year of construction: 2004, functionality: fully functional, cutting width (max.): 400 mm, cutting length (max.): 6,000 mm, total width: 5,400 mm, total length: 13,500 mm, total height: 2,500 mm, saw blade diameter: 800 mm, type of input current: three-phase, rotational speed (max.): 800 rpm, DePauw QCUWSCNC18 Double Cut Cross Saw, manufactured in 2004. Fully functional and well maintained, suitable for immediate use in production. Cutting width: 400 mm Cutting length: 6,000 mm Total machine dimensions: 13,500 mm (length) × 5,400 mm (width) × 2,500 mm (height) Rear saw blades: 800 mm diameter, maximum speed 1,500 rpm Cjdpew Nbhmjfx Addjaa Front saw blades: 500 mm diameter, maximum speed 3,000 rpm Saw type: Double Cut Cross Saws Condition: Used, fully operational. Location: Cork, Ireland Delivery available at buyer’s expense. Price: €25,000 Contact for more details or to arrange a viewing.

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments Codpfx Ajd H Hmheddoaa CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, Contactor, semiconductor contactor, contactor -Max. 11 kW 660 V -Price: per piece -Number: 180 pieces available -Weight: 0.5 kg Cjdpob A N Aljfx Addeaa

Condition: used, Three head band saw IDC000093 - manufacturer: Talsu - each electric motor: 11 kW - for square log cutting - with electric cabinet - hydraulic station - three head Casdpfxsupt Sij Addsa - for sawing pallet boards - feed chain - feed pushers from the top

Year of construction: 2005, condition: as good as new (ex-display), ACCEPTANCE OF SELF feed head is held on the guides of hardened cylindrical surface and additionally treated grinding. Three-phase motor power 3HP 2800 rpm / min. Output frontal saw blades with cutting heads. Feed discs cost of delivery cover customer Startup type Cajdpfxjb Rnv Ss Addja negotiated Description Notes Saw 2 a head for precision cutting of aluminum profiles GAMMA. Precise double miter saw for serial production of blanks at an angle of 90 ° and 45 °. Convenient and safe execution of multiple cutting operations. Automatic positioning of the moving cutting head. Automatic positioning of the moving cutting head. Adjustable stroke discs. The angles of inclination of the cutting head 45 °, 90 °, easy pneumatically. Intermediate angles are adjusted manually using the bumper and angular scale. LENGTH OF CUT = 4000 5220 x 1390 x 1460 mm Weight 1200 kg.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 0-341-07-8150, cutting length (max.): 4,300 mm, saw blade diameter: 380 mm, cutting width (max.): 3,800 mm, throat depth: 75 mm, Equipment: scorer, TECHNICAL DETAILS Blade extension: 75 mm Cutting length: 4,300 mm Cutting width: 3,800 mm Main saw blade, max. diameter: 380 mm Main saw blade, power: 9.2 kW Scoring saw blade, max. diameter: 180 mm Scoring saw blade, power: 2.2 kW Pusher carriage speed: up to 80 m/min Saw carriage speed: 1–120 m/min MACHINE DETAILS Cjdpexx Svrefx Addoaa Numerical control: POWER CONTROL Software: Cad Matic 4.0 Electrical Data Voltage: 400 V Current: 31 A Frequency: 50 Hz Secondary current: 40 A Control voltage: 24 V DC EQUIPMENT Front panel loading Front-side unloading Automatic side aligner Fixed front table made of Bakelite with air cushion system 3 mobile front tables made of Bakelite with air cushion system Pusher carriage with 6 clamps

Condition: ready for operation (used), Year of construction: 2003, functionality: fully functional, saw blade diameter: 250 mm, cutting length (max.): 3,100 mm, cutting height (max.): 1,640 mm, cutting depth: 60 mm, rotational speed (max.): 5,250 rpm, The machine has been completely overhauled. New spare parts worth €4,500 have been installed! Casdpfx Asxyi Dioddja TECHNICAL DETAILS Cutting capacity Length: 3,100 mm Vertical cutting height: 1,640 mm Horizontal cutting height: 1,532 mm Cutting depth: 60 mm Saw blade diameter: 250 mm Bore: 30 mm Speed: 5,250 rpm MACHINE DETAILS Motor power: 3.9 kW Electrical connection: 3 × 400 V / 50 Hz

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 1832.14, feed rate X-axis: 60 m/min, cutting height (max.): 160 mm, cutting width (max.): 360 mm, total length: 1,300 mm, total width: 1,300 mm, TECHNICAL DETAILS Max. cutting height: 160 mm Max. cutting width: 360 mm Max. feed speed: 60 m/min MACHINE DETAILS Machine dimensions (L x W x H): 1,300 x 1,300 x 1,700 mm Infeed table dimensions (L x W x H): 7,600 x 2,000 x 1,100 mm Outfeed table dimensions (L x W x H): 6,300 x 2,100 x 1,050 mm EQUIPMENT Cedpfjx Ahc Aex Addeaa Under-table cross-cut saw Automatic feed