Used Glue Applicator for sale (9,544)

Condition: used, Year of construction: 1985, Folding system Note: The system has been refurbished and received a new control system in 2013! Folding system consisting of: Lifting table with pusher Roller conveyor Infeed Transfer system and workpiece pre-cleaning Double-end profiler Manufacturer: Homag Hedpfx Aszuynzeftefl Type: FG63 Year of manufacture: 1985 Technical data - with adhesive strip application - Machine for profiling and folding the edge strips - Milling station on both sides - Control system: Siemens Simatic Touch - Glue application unit - Folding unit for folding the pre-folded workpieces - Sliding shoe for pressing - Extraction table for material removal Electric scissor lift table Manufacturer: Altek Year of manufacture: 2014 Technical data - Load capacity max. 1000 kg - with attached roller conveyor - Dimensions approx. 3100 x 1000 mm - with height measuring device for automatic detection of stack height and corresponding cycle time Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Heavy-duty hydraulic strip or beam press, Wemhöner Type VS 4 S, for veneering strips, gluing timber or other pressing tasks. The press has four independently controllable pressing surfaces. Includes dismantling and loading. Fixed loading date: 15 June 2026. Glue applicator also available. Technical data: - Working length: 3,090 mm - Pressure: max. 104 t Hfedpfozryzcjx Aftsl

Condition: like new (used), functionality: fully functional, Single-sided glue applicator OSAMA S2R-1300 Hfodpfxox Tha Ss Aftjl Working width: 1300 mm Min./max. clearance height: 0-90 mm Applicator roller diameter: 185 mm Feed speed: 18 m/min Motor: 0.37 kW Upper roller: grooved Lower roller: smooth New rubber roller coverings

Condition: used, Year of construction: 2017, Edge banding machine Manufacturer: Homag Type: Optimat KDF 440 C Year of manufacture: 2017 Hsdpfx Aezuykcjftjfl Technical data Workpiece thickness: 8 - 60 mm Edge material: 0.4 - 8 mm (depending on the equipment) Feed rate: 8 - 18 m/min (stepless) Workpiece length min. approx. 120 mm Workpiece width min. approx. 60 mm Glue application EVA hot melt adhesive, optionally PUR-compatible Glue reservoir Teflon-coated, quick-change system possible Total connected load approx. 15 - 20 kW (depending on the equipment) Compressed air requirement: 6 - 7 bar Machine weight: approx. 3,000 - 3,800 kg Control system: powerControl / powerTouch CE marking Equipment: Joint milling Glue application Pressure zone Cut-off saw unit Milling unit top/bottom Corner rounding unit Scraping blade unit Edge finishing unit Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2016, overall weight: 1,870 kg, Edgebander manufactured in 2016. This BIESSE Akron 1440 A features a pre-milling unit, multifunction milling units, flat trimming, and a corner rounding unit. It also includes automatic glue application, motorized adjustment of units, and a touchscreen control for ease of use. It comes with the complete panel return system. If you are looking to get high-quality edgebanding capabilities, consider the BIESSE Akron 1440 A machine we have for sale. Contact us for further details. Technical Data: • Model: BIESSE Akron 1440 A • Year: 2016 • Working hours: approx. 4,200 h • Power: 13 kW • Power supply: 380 V, 50 Hz, 3 / N / PE • Full-load current: 24 A • Air pressure requirement: 7 bar • Weight: approx. 1,870 kgWorking Capacity: • Feed speed: 8 / 12 / 15 / 18 m/min • Workpiece thickness: 10–60 mm • Edge thickness: coil 0.4–3 mm, strip up to 12 mm • Edge height: 14–64 mm • Minimum panel length: 140 mm • Minimum panel width: 50 mmInstalled Units / Equipment: • Automatic glue application unit • Pre-milling unit • Multifunction milling units R1 + R2 • Flat trimming unit • Corner rounding unit (Rondomat) • Radius profile scrapers • Flat scrapers • Polishing brushes • Cleaning liquid application unit • Motorized adjustment of units • Touchscreen control • IntelliSet system • FAST setting technology Hodpfezug Smsx Aftefl • ECO modeAdditional Information:The transport chain / output conveyor for finished panels is included with the machine.Availability:The machine is currently in daily production and can be inspected under power. Inspection and testing are possible by prior appointment.Available for collection from the beginning of September 2026.

Condition: used, Year of construction: 2018, Used machine Used edge banding machine from Holz-Her, model Sprint 1329 Performance, with Return system from Barbaric, type RTS 01 Hfedpozt Twtefx Aftol Edge banding machine: Year of manufacture: 2018 Motorized roller bridge 1329 PERFORMANCE iTronic - Adaptive pressure and glue quantity control, automatic fine adjustment depending on the program Infeed fence, standard B20 mm Infeed fence for precise feeding of the workpiece Edge Control 19 control system with 18.5" touchscreen color display 16:9 Jointing cutter unit 1802 (2 x 2.0 kW, 200 Hz, 12000 min-1) with 2 cutter units for jointing the edge of the panel (1x forward rotation, 1 x reverse rotation) Edge feeder 1901 SYNCHRO, automatic transport of coil and strip material Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) Pressure unit 1913, motorized, 1 roller driven, 2 follower rollers Spray device (release agent) after the pressure unit with 2 spray nozzles for coverage up to 60mm working height Trimming unit 1918 (60 mm), pneumatic (2 x 0.45 kW, 12000 min-1), pneumatically swiveling 0/10° Cutter unit FR701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Shaping cutter unit FF701, 100% repeat accuracy at the push of a button thanks to play-free mechanics Scraping unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the feeler rollers Surface scraping blade FK701 with pre- and post-sensing for removing glue residue Motorized adjustment of the infeed fence for precise feeding of the workpiece to the jointing cutter unit Automatic chain lubrication / intelligent automatic transport chain lubrication GLU JET collection container Spray device 1856 for the infeed and outfeed area: Buffing unit 1940 (2 x 0.12 kW, 50 Hz, 1400 min-1) For final polishing and edge polishing. With 2 textile discs, swivel range 0 - 5° RETURN system connection (emergency stop interlocking) Connection of a workpiece return system to the control system from HOLZ-HER Machine dimensions approx. 5600 x 1010 x 1900 mm Machine weight approx. 2100 kg Return system: Year of manufacture: 2018 Machine number: 2180122-206 Further details can be found in the PDF Availability: by arrangement Location: Röllbach

Condition: used, Year of construction: 2011, Second-hand machine Year of manufacture: 2011 Condition: Machine fully overhauled and serviced Features and technical specifications: Feed speed: infinitely variable 10–18 m/min Edge Control 19 control system with 18.5-inch colour touchscreen Joint milling unit Edge feed Adhesive application station: Cartridge, feeler nozzle with automatic glue level adjustment Printing unit Trimming unit Multifunctional milling unit Hsdpezk N Eujfx Aftjfl Copy milling unit Radius scraper unit Flat draw blade Polishing Workpiece thickness 6–60 mm Edge thickness 0.4–8 mm Min. workpiece width 60 mm Shortest workpiece length 180 mm Dimensions: 5300 x 1500 x 1600 mm Weight: 2,200 kg Location: 65439 Flörsheim Availability: at short notice

Condition: good (used), Year of construction: 2010, operating hours: 25,000 h, Kolbus DA 270 Used hardcover production machine for book covers, file cases, calendar backs, or games Year 2010 Standard equipment Cardboard pre-stacking belt Sheet feeder for non-stop operation Fault monitoring during gluing Utility cylinder with grippers and interchangeable die plates External glue application Unit for padded covers Automatic cover counter Programmable automatic settings, motor-driven adjustments Speed up to 65 cycles/min Hedpfx Ajzxdhmoftsfl Unit for processing roll spine material Heated glue application rollers and doctor blade Viscosity control unit for automatic water supply to ensure consistent glue viscosity Unit for mirror gluing with hotmelt Board spine magazine Small format unit Large format unit (height) for open cover format of max. 670 × 405 mm Large format unit (width) for open cover format max. 678 × 390 mm, width max. 718 mm Corner trimming device (manual operation) Unit for processing asymmetric covers and sheets Unit for processing thin boards Optional equipment for viscosity control unit Available in stock

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,193 h, functionality: fully functional, machine/vehicle number: 8616, drive type: Omron, number of previous owners: 1, input voltage: 400 V, input frequency: 50 Hz, number of print heads: 1, air pressure: 6 bar, control voltage: 24 V, nominal power: 8.1 kW (11.01 HP), sieve area: 2,60,000 mm², sieve perforation: 7 mm, space requirement height: 3,500 mm, space requirement length: 6,000 mm, space requirement width: 4,000 mm, control type: PLC-controlled, number of digital displays: 1, production capacity: 14,500 unit/h, Equipment: CE marking, emergency stop, type plate available, Fully functional 6-head stickpack machine equipped with a glue-applied hook applicator, with a capacity of 14,500 units/hour. The machine has seen little use and is in excellent condition. It is being sold due to the standardization of the machine park to another brand. The machine includes, among other things: * Automatic film tensioning and film alignment system; * Videojet inkjet printer, Meler hot melt unit, dust extraction system; * Omron control system, touchscreen HMI, and servo motors, Festo pneumatics; * Hot melt adhesive application for the suspension hook (can also function without hook application); * Integrated punching function for a 1.5 mm opening in the stickpack (can be disabled); Hfjdpfx Afezgwh Notol * Automatic box selector with a reject system; * Vibrating screen, infeed conveyor, hopper, and adjustable volumetric dosing system. * Includes some various spare parts and a complete digital English-language manual with technical drawings. * Dimensions of the finished product without hook application: 95 (length is adjustable) x 35 mm, with a usable internal volume of approximately 10-13 ml. The machine has always been well-maintained. Annual maintenance has been consistently performed. The machine can be demonstrated in working order. Includes some spare parts and a digital manual. Terms of sale: The machine is sold EXW (Incoterms® 2020) at the seller's location. Disassembly, internal transport, loading, transport, unloading, and re-installation are entirely at the buyer's expense, risk, and responsibility. Technical support during disassembly and internal transport can be provided, but it is strictly advisory and does not imply any liability on the part of the seller. Additional information or a demonstration can be provided upon request.

Condition: used, Year of construction: 2010, - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Single-sided edge banding machine Manufacturer: Homag Type: KAL 310/7/A3 Year of manufacture: 2010 Technical data - Equipped with ISAS 28-position edge magazine - PU gluing unit - With Boomerang return system Edge trimming unit with 2 motors, each 3KW, 150 Hz, 9,000 RPM. Pneumatically controlled for pre-trimming PU gluing unit 34 with PU hot melt unit - capacity max. 6 kg/h Container size 2 kg. QA glue application unit Selectable edges from the ISAS 28-position edge magazine 4 pressure rollers Release agent spray unit, top and bottom Trimming unit WK 13, bevel / straight With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Electropneumatic adjustment of the trimming motors to 2 positions (flush trimming and with overhang) Pre-trimming unit with 2 motors, each 0.55 KW, 200 Hz, 12,000 RPM. With double-roller scanning. With electropneumatic adjustment Shaping trimming unit FK 11 - manual For processing the edge overhangs on the top and bottom edges of the workpiece, as well as for milling the front and rear edges With 2 motors, each 0.4 KW, 200 Hz, 12,000 RPM. Universal trimming unit UF 11 With motor 4 KW, 150 Hz, 9,000 RPM. Swiveling 90°, electropneumatically controlled With HSK 63 F collet for unlocking by push-button Profile scraping unit PN 10 Pneumatic adjustment for moving sideways out of the working area Finishing unit FA11 top/bottom Consisting of: Glue joint scraping blade Cleaning agent application Buffing unit with 2 motors, height adjustment with the upper pressure Machine control via 19-inch touchscreen Return system BOOMERANG ZHR05 With air cushion table, angled, length 2,000 mm, width 1,000 mm Conveyor belt width 1,100 mm Workpiece parameters: Length 300 - 2,500 mm / Width: 60 - 1,100 mm or Hfodpfx Aezuyhhoftjl Length 300 - 800 mm / Width: 1,100 - 2,000 mm Thickness 8 - 60 mm For 4-sided processing: Min. part size: 300 x 300 mm / max. part size 2,000 x 800 mm With roller strip for supporting wider parts.

Condition: excellent (used), Hebrock F5 Edge Bander Well-equipped, can be inspected before purchase. PRE-MILLING cutters, Glue application with a roller, Has a glue release mechanism, The glue pot is replaceable. A second glue pot is included. Pneumatic pre-trimming guillotine, Pressure rollers, Final trimming saw, Liquids Top and bottom milling unit, R1 – R2 Profiling cylinder Corner rounding unit Hfedpfxoza Uq Ae Aftol Flat cylinder, Polishing unit Pneumatic 3-point adjustment Max. veneer thickness in roll: 3mm, Power consumption: 7.8 KW, Max. part thickness: 50mm Used machine, very good condition Mileage: 62,000 meters

Condition: ready for operation (used), Year of construction: 2016, A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request. Hjdpfowzx Tfox Aftefl

Condition: excellent (used), Very well-maintained Sumbel Herold 500 edge banding machine in excellent condition. New infeed roller! Working width 50cm. Robust, solid two-roller edge banding machine for cold and hot glue. Consistent and adjustable glue application by varying the distance between the two rollers. 230V/50Hz, dimensions 85x60xH35cm, 60kg. Hfjdpfx Afezx Aipstol

Condition: ready for operation (used), Year of construction: 2019, A cold-glue labeling machine Gernep is available. Direction of travel: LM, nominal output: 5000bottles/h, control range: 1000-5500bottles/h, gluing height: 330mm, bottle format height range: 297mm-350mm, bottle format diameter range: 74mm-89mm, bottle material: glass, bottle volume: 0.75/1l, bottle content: wine, application: body/neck ring label/back label. Cold-glue format 1: label length range: 25mm-160mm, max. label height: 150mm, max. label height bottom edge/top edge: 15mm/320mm. Cold-glue format 2: min. label length: 25mm, max. label height: 115mm, max. label height bottom edge/top edge: 15mm/130mm. Including dating, optical orientation, upper-part height adjustment, glue pump and two cold-glue units. Documentation available. An on-site inspection is possible. Hfjdoy N Ddxjpfx Aftol

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Hsdpfx Afsxraimstefl Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit

Condition: used, Year of construction: 1996, functionality: fully functional, Semi-automatic F/J line with automatic glue application Infeed length 150-1200mm Infeed width up to 200mm Working height 900mm Hedpfx Aexxz Eioftofl Feeding package width 520mm Cutter spindle diameter 50mm Cutting tool diameter 160mm Press length from 4000mm to 6000mm Overall electrical supply ~38KW

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Condition: Good (the machine has undergone extensive maintenance every year, most recently in March 2026!) Equipment: - iTronic – Adaptive pressure and glue quantity control with automatic, program-dependent fine adjustment - MOT SPS adjustable infeed fence - Automatic chain lubrication: Intelligent automatic transport chain lubrication - Edge Control 19 control system - EL GRM variable, 400V 50Hz, 2.2kW V2 SPRINT 1329 PERFORMANCE 400V 50Hz - Edge Control 19 control system with 18.5" touchscreen color display, 16:9 format - ECO MODE energy-saving mode: An automatic standby circuit - Jointing unit 1802 (2 x 2.0 kW, 200 Hz, 12,000 rpm) with 2 milling units for jointing panel edges - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, left-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Diamond cutter, Ø 70 x 64 x 30 mm, Z2+2, right-hand rotation, Air Stream System (HOLZ-HER / LEUCO Patent) - Edge feed 1901 SYNCHRO: automatic transport of coil and strip material - Glue application station Glu Jet GJ301 automatic (2.3 kW, 50 Hz) - DW501 SPS motorized SPRINT - GM501 spray device after the printing unit with lubricant (recommended for high-gloss edges) - End trimming unit 1918 (60 mm) pneumatic (2 x 0.45 kW, 12,000 rpm) pneumatically tiltable 0/10° - Milling unit FR701: 100% repeat accuracy at the push of a button due to backlash-free mechanics Hsdpfx Ajzpzy Ioftsfl - Air Stream System multi-cutter, diamond Ø 70.9 x 16 mm, Z = 2+2 - Form milling unit FF701: 100% repeat accuracy at the push of a button due to backlash-free mechanics - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, left-hand rotation with CM technology - Diamond cutter, Ø 72.5 mm x 19 mm, Ø 20 mm Z = 4, radius R = 2 mm, right-hand rotation with CM technology - Scraper unit 1929 MOT4 incl. high-gloss package with motorized adjustment of the tracing rollers - HW reversible knives for scraper holder, R = 2.0 mm (2 pcs. required) - Flat scraper FK701 with pre- and post-sensing for removing adhesive residue - TR501 spray unit for infeed and outfeed (separating and cleaning agent) - Includes nesting shoes below with their own spray unit Location: Hesse Availability: Approx. July 2026

Condition: used, Year of construction: 2016, Industrial automatic edge banding machine SOLUTION XD KEY FEATURES "E-TOUCH" CONTROL WITH AUTOMATIC PROGRAMMING: A SINGLE "TOUCH" IS ALL IT TAKES TO OPERATE THE MACHINE STANDARD PRESSURE DEVICE WITH DRIVE BELT FOR OPTIMAL PANEL GUIDANCE EDGE BANDING OF ROLL MATERIAL, STRIP EDGES AND SOLID WOOD EDGES GENERAL FEATURES Single-sided edge banding machine in left-hand version for edge banding of roll material and strip edges with all conventional hot melt adhesives. The base frame consists of a stable steel welded frame with higher rigidity, which provides optimal support for the installation of the processing units. The upper pressure beam consists of a thick-walled steel profile and a double trapezoidal drive belt, which is automatically positioned according to the panel thickness. Height adjustment with display on the upper pressure beam and on the operator panel. Manual workpiece feeding system with a large-sized work area and increased support surface facilitates the feeding of large workpieces. Adjustable infeed fence for two positions with automatic selection for processing with or without a pre-milling unit. Upper working units are attached to the pressure beam and mechanically connected to ensure automatic adjustment when changing panel thickness. Lower working units are attached to the machine frame or to the longitudinal support for precise referencing to the panel. All high-frequency motors are operated via frequency inverters. Each unit is equipped with its own inverter for optimal flexibility and improved machine production times. Protective hood for all units positioned after the glue application unit. Polycarbonate windows ensure a good view of the units during processing. Interior lighting of the hood. Protective hood with sound-absorbing material for lower noise emissions during operation. Spacer on the infeed fence allows the machine to be fed with the correct spacing. The spacing is automatically adjusted to the selected feed rate. Dust extraction port arranged on the pivoting control panel, positioned in the infeed area, is adjustable for ergonomic operation. The electrical system complies with current regulations. Electrical components are housed in a metal housing, attached to the machine frame and equipped with doors for easy access in case of maintenance. Standard voltage is 400 V EU 50 Hz (with neutral conductor). Material feed is via a feed chain with 80 mm wide chain plates made of rubberized nylon, for optimal guidance and high load capacity. The chain slides on 2 guides made of hardened and ground steel, one round and one flat guide, to guarantee straight feed and to protect against lateral displacement. Automatic chain lubrication. The amount of lubricating oil is optimized by the control system depending on the panels being processed. External support roller track positioned along the entire length of the machine; consisting of an extendable opening system up to 650 mm (for panels with a maximum width of 1200 mm). E-TOUCH PC control system for quick and easy execution of the main functions of the machine. Includes: – Processing of programs in Just in Time mode – Possibility of management via bills of materials – Possibility of management by Hodexy Tm Iepfx Aftsfl

Condition: excellent (used), functionality: fully functional, Working width: 800 mm Maximum element height: 100 mm Manual adjustment of roller spacing Hfsdoz Agvhepfx Aftsl Simultaneous application of adhesive to the top and bottom surfaces

Condition: good (used), Brandt edge banding machine with AIRTEC + jointing unit Adhesive: EVA / PUR / Airtec Roll material: 0.4-3 mm edge thickness Strip material: 0.4-15 mm (12 mm) edge thickness Workpiece thickness: 8-60 mm Recently serviced! Jointing unit OVERVIEW OF UNIT CONFIGURATION: JOINTING MILLING UNIT 2 x 2.2 kW 200 Hz GLUING UNIT A12 END TRIMMING UNIT CHAMFER/STRAIGHT 2 x 0.35 kW PNEUMATIC ADJUSTMENT END TRIMMING CHAMFER/STRAIGHT PNEUMATIC 2-POINT ADJUSTMENT END TRIMMING PRE-MILLING UNIT 2 x 0.55 kW 0 DEGREES PNEUMATIC 2-POINT ADJUSTMENT MULTIFUNCTION SHAPING MILLING UNIT 2 x 0.4 kW PROFILE SCRAPER WITH QUICK-CHANGE HEADS PNEUMATIC SCRAPER ADJUSTMENT GLUE JOINT SCRAPER BUFFING UNIT Hfedpjyz Sxbefx Aftjl Feed speed: 8-18 m/min, with contour milling cutter 14 m/min Total length: 5760 mm Roll material: 0.3-3 mm Strip material: 3-15 mm (With VKNR 4845 exchangeable milling units, max. edge thickness is 12 mm!) GLUING UNIT A12 WORKPIECE PRE-HEATING QUICKMELT APPLICATION UNIT ADHESIVE REACTIVATION Infrared Workpiece return system BOOMERRANG TFU 140/R 20 Year of manufacture: 2016 As shown in illustrations Available from November 2026 All data taken from the data sheet, therefore subject to change Technical specifications available on request

Condition: used, Year of construction: 2018, Edge banding machine Manufacturer: Biesse Type: Jade 340 Year of manufacture: 2018 Technical data - Workpiece thickness: 10 - 60 mm - Edge height: 14 - 64 mm - Edge thickness: 0.4 - 8 mm - Feed rate: 12 m/min Biesse HD touchscreen control unit Units - Pre-milling unit - Glue application unit - Additional interchangeable glue pot - Trimming unit - Corner rounding unit - Flush trimming blade and profile trimming blade - Polishing unit - Release agent spray unit Hfedpfx Afjzux Tvotel Operating hours as of May 14, 2026: 4832 hours.

Condition: excellent (used), functionality: fully functional, Holz Her Auriga 1308 XL FÜ + PU compact design - edge thickness 0.4 - 8 mm SPS-based Edge-Control PPC 231 touchscreen control system motor-driven, position-controlled bridge height adjustment pre-milling unit for attachment before the gluing section fully automatic edge magazine for roll and strip material GLU JET cartridge gluing station + PU gluing glue application via nozzle technology workpiece height 6-60 mm automatic glue height adjustment pressure unit 1912-3, pneumatic trimming unit 1918, pneumatic, for roll and strip material up to 8 mm edge thickness with pneumatic adjustment for 0-10° bevel of the trimming saw milling unit 1827 MOT 4, flush trimming 8 mm, radius milling - bevel milling - 15° MOT NC axes controlled via control panel profile milling unit 1832 pneumatic, rounding of corners up to edge thickness 3 mm in a single pass scraper blade unit 1929 MOT2 for bevels and radii with 2 scraper blade holders, NC axes controlled via control panel surface scraper blade unit - finishing buffing unit - polishing spraying system at the infeed and outfeed complete tool equipment included Hjdpfszib Nisx Aftsfl first delivery 2013 machine is FUNCTIONALLY TESTED and in TOP CONDITION available from warehouse Lieboch

Condition: used, Year of construction: 2008, POWER CONTROL PC 20+ Panel height (mm) 60 PVC-ABS edge thickness (mm) 3 Solid wood edge thickness (mm) 12 Feed speed 20 m/min Manual infeed guide Pre-trimming unit EVA glue application and pre-melting unit Edge holder plate End trimming unit Two-motor overlapping trimming unit Two-motor staggered chamfering unit with NC adjustments Two-motor rounding unit Edge scraper unit Glue scraper unit Brush unit Hsdpfx Afew Db Rfetefl

Condition: refurbished (used), Year of construction: 1999, functionality: fully functional, Glue applicator for window glulam .Width of rollers 250 mm .Dispensing troughs .The applicator also has a glue tank with dispenser on top .Machine after renovation .Overlaying rollers new. Machine has input and output conveyor .Machine fully operational complete and after overhaul . Hfjdpfx Afjt N H R Ejtjl

Condition: used, Year of construction: 2022, The LINEA BOX WRAPPER 24 by Peroni Ruggero is a modern, automatic line for wrapping rigid boxes. It is a solution designed for manufacturers of premium packaging who require precision, repeatability, and fast order fulfillment with minimal changeover time. The machine enables the production of a wide range of boxes with different dimensions, while maintaining excellent wrapping quality even with demanding designs. An automatic paper feeder and an advanced glue application system with viscosity control guarantee a stable and reliable process. The operator places the box onto the paper sheet, and a mechanical centering system, supported by sensors and drives, precisely positions the elements before further processing. The materials are then automatically transported to the wrapping module, where the entire process runs fully automatically. The finished products are collected by a Pick & Place system and transferred to the output section. An additional advantage is the quick tool change system, which minimizes production downtime. Tools adapted to specific box sizes can be made of wood and installed in just a few minutes. The machine has been used sparingly, so it is in very good technical and visual condition, ready for immediate implementation in production. Key benefits: Automatic production of high-quality rigid boxes Handles boxes up to 240 mm in height High precision in positioning and wrapping Automatic glue viscosity control Short changeover time – approximately 3 minutes Output of up to 350 finished boxes per hour Reliable Pick & Place collection system Very good technical condition – manufactured in 2022 Technical data: Manufacturer: PERONI RUGGERO Model: LINEA BOX WRAPPER 24 Year of manufacture: 2022 Serial number: 011 Paper format and weight Hodpfozbthvsx Aftjfl Maximum sheet format: 700 × 1000 mm Paper weight: 110–150 g/m² Box dimensions Minimum internal dimension: 50 × 50 mm Maximum external dimension: 500 × 500 mm Box height: 20–240 mm Performance Automatic format change: approx. 3 minutes Mechanical speed: up to 500 cycles/h Production output: up to 350 boxes/h